I have an Huawei Ascend y210d on which I installed CWM recovery. After that I installed a custom ROM, but now I want to flash its official firmware.
But its official firmware is not installing. It got told using Huawei firmware Indian version downloaded from Huawei. I am using this procedure:
(1)First copy dload (in dload folder update.app file is present) folder to the root of the SDcard
(2)Then turn off your device pick out battery then again insert battery
(3)Then press buttons volumeup+volumedown+powerbutton
(4)Then its start unpacking the update package But in step 2 it failed on installing.
This is the error.log I get in SD Card :
{filename = /mmc1/dload/update.app
call RCV_MODULE_END_EVENT failed,module = OEMSBL_VER_LIST
CMD=0xf,moduleaddr = 0xf0000000, len_tmp=0x2c54
filename = /mmc1/dload/update.app}
What can I do to get this fixed?
Only Solution for Recover Y210D dual sim phone!
Install Any Recovery Like CRM or TWRP....
search for "Room original del huawei y210D" in youtube. Exactly as given.... u will see one HD video link in search result.. downlaod the file mentioned in description of the vdo...
Download the rom file mentioned in youtube vdo description
Wipe the OS of ur mobile. wipe cache.. and others. Keep downloaded zip file in SD card.
Install using recovery....
Enjoy.... :laugh::good::good::good::fingers-crossed:
Related
Hello
here i am posting here because i cant post on Miscellaneous Android Development , how ever i think i post there before while working on B5512
I Just got new G700 it came with B115 middle east channel , phone is good but as a start is there is a update i must ask my self is root ready , and CWM for sure so i start the digging
@chamaruco thank you for your great thread which saved and helped many people
now i got a file and i think you were looking for it ""G700-U10_V100R001C00B124CUSTC432D001_Firmware_Portugal_Channel-Others_4.2.1_EMUI 1.8_05021LMW.zip"" it contain usb upgrade and sd upgrade with drv and flash tool
i notice EMUI 1.8 not 1.6 which i saw for example a permission manager with it on P6 is that here in that rom too ?
is that rom improved than mine b115 phone is good for first look but
(in B115)
1-camera quality is strange i dont mean bad but it look very strange it is like very poor on quality
2-in call volume is too low in my opinion all " in test mode"
Question now did any one get that update "EMUI 1.8 B124" can tell is there is any improvements ?!
Question am i able to flash CWM image directly with flash tool to save some annoying procedures ?!
a member here provide flasher and cwm.img and orginal recovery.img
i did not work with the phone yet need to shift data from old phone remove ext2 part and prepare for change , and feeling lost here
want to strike it all once
i will upload "EMUI 1.8 B124" soon as it came from a private server
any suggestions are welcome
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
how to install this firmware i.e. B124 on G700-10
chamaruco said:
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Click to expand...
Click to collapse
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
talvigi said:
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
Click to expand...
Click to collapse
Dload inside put update.app file, restart in updatemode
chamaruco said:
Dload inside put update.app file, restart in updatemode
Click to expand...
Click to collapse
But my mobile does not boot into CWM recovery mode as i have seen in my previous Qmobile A8 it always restarts in the defualt recovery mode which only give options to "1. reboot, 2. update from SDcard, 3. update from cashe, 4. wipe/delete user data and wipe/delete cache and in the last there is a calibarate TP, AND OFF COURSE THESE ALL ARE THE ANDROID BUILTIN RECOVERY STEPS NOT OF THE CWM
And off course there is not any file or folder named update.app in the downloaded .zip/extracted file. "as i have mentioned above the folder contains a folder named META-INF and three img files named as boot cust and system while a .bin file named logo too.
THANKS FOR YOUR TIME AND HELP.
foffa said:
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
Click to expand...
Click to collapse
So after I select the Reworked scatter file there is only the sec_ro partition checked to flash. So after flashing it do I now select the previous scatter file and then flash everything (including preloader)?
I rooted my phone, and then i was trying to flash a Marshmallow Rom. For this, i wiped my system, boot, dalvik cache, internal memory. I forgot to take a nandroid backup. For some reasons, there was some error in flashing that zip file, so i tried to reboot my phone normally and it failed. When i reboot my phone, the company logo appears and it remain sticked there. For now, i could only access the recovery and fastboot. Please HELP me..... Thank you.....
You got exactly same problem with me but i have model: Honor7 Premium (PLK-L01)
Hi,
what did you expect? If you wipe de system partition then obviously the operating system is gone.
What you need to do is to download the full stock rom of your phone somewhere on the internet (needrom.com for instance if available).
You need to take the closest version of your old system and also the same technical name (PLK-UL00).
For instant if you were already on Android 6.0, you can no longer use a stock rom of Android 5.x.
When you have that full stock rom on your computer, you need to use multi-tools and use the unbrick option. Meaning you will be asked to extract the most important img files from the stock rom and to put them into a specified folder. The tool will then restore that rom on the partition file.
Kind reg,
I had android lollipop 5.0.2. Is it possible that i install the backup file of any other person's honor 7 PLK-UL00 running same android?
Hi,
please have a look there and use the stock rom that fits with your model and version.
https://yadi.sk/d/ZD8hXFjenRFHf
Kr,
how do i flash an UPDATE. APP file?
Create folder called dload on your SDCard and copy Update.app file to your SDCard inside that "dload" folder.
Then shutdown your device and use 3-Button method(Vol- & Vol+ & Power button) to boot that to recovery, that should start installing "recovery" file what is that Update.app inside dload folder.
Sent from my PLK-L01 using XDA-Developers mobile app
i don't know but the 3-button method is not working. When i do so, it boots to the recovery and nothing happens. Anyways, i have copied the dload folder with update.app file to the sdcard.
Use Multi-Tools available in the forum. There is a little app where you will be able to extract all required files from the file update.app.
Then in multi-tools use unbrick option and it will install the stock rom correctly. ++
http://forum.xda-developers.com/honor-7/general/honor-7-multi-tool-t3281176
Thank you!!!!! Sebastien_be and everyone to help me... It worked very well.. Thank u guys so much for the help...
Hi all recently purchased the Mecool KM8 P 2GB/16GB S912 Amlogic, updated the firmware to 7.1 but lost root access. I have managed to find some instructions on a Russian website to root the stock firmware but can't make head nor tale of it and don't want to brick the device.
The google translate version of the instructions reads as follows:
To get root 7 Androide did:
1.Nado SuperSu create a text file without an ending .txt textBOOTIMAGE = / dev / block / boot
2. Flash card throw Recovery for 7 Androyd created Fail SuperSu and SuperSU.zip (5,63 MB)
3. Boot into Recovery with USB there "Advanced" ==> "File Manager" find the file on a flash drive that put his name it .SuperSu in and copy it into the folder / system
3. Without leaving the Recovery go to "Set" and set SuperSU.zip (5,63 MB)
Can someone please help to decipher the above?
Here's the link to the instructions website. The downloads are pinned to the top of the page. Please let me know if you have any success...
http://4pda.ru/forum/index.php?showtopic=807465&st=1100#entry62380504
1. Create a texfile with this content:
BOOTIMAGE = /dev/block/boot
If I am not mistaken then this file should be saved wit the name .SuperSU and no extension.
2. Copy this file and the Supersu.zip onto a SD with a working TWRP recovery.
3. The file .SuperSu is now to be copied into the system folder - it does not specify if the one from the box or the one from the recovery is used - I assume the one on the box. But needs to be tested to be sure.
4. Without ending the recovery session go back and install install SuperSu.
Thing is you need a recovery that works with Nougat to do any of this.
But then again translators suck and someone capable of reading russing could bring some light on it....
Managed to get it to work. Steps in common English are as follows:
To get root on Android 7.1:
1. Create a text file (eg in Notepad) and name it Supersu without an ending .txt with the folowing text BOOTIMAGE = / dev / block / boot
2. On a microsd card copy Recovery.img (TWRP 7), the created SuperSu file (from step 1) and SuperSU.zip (5.63 MB)
3. Insert the card into Boax and boot into Recovery.
4. Using theTWRP recovery got to Advanced" then "File Manager" find the created Supersu file (from step 1) and copy it into the folder / system.
5. Without leaving the Recovery go to "Install" and flash SuperSU.zip (5.63 MB) from the Microsd card
can you post the required Files here?
i dont understand russian so i dont know what they wrote on 4pda.ru
I have found all file and attached at end of the Post
1. decompress km8p.zip to the root of your TF-Card so you have 3 Files on the root of your TF-Card (.SuperSU, SuperSU.zip and recovery.img)
2. power off your KM8P
3. Press Reset and hold it
4. Power your Box on and hold Reset
5. If you see the TWRP-Logo you can stop press Reset
6. On the Screen accept write and modifying Systemfiles
7. go to Advanced" then "File Manager" copy .Supersu file from TF-Card in/ system of your Box
8. then go to "Install" and flash SuperSU.zip (5.63 MB) from the TF-Card
9. Reboot and now you have root installed
MetaIIica said:
I have found all file and attached at end of the Post
Click to expand...
Click to collapse
I think you uploaded the wrong file, as the zip file you uploaded only contain one file (km8p), which has no file extension (it is probably a .zip file).
However it is missing the other files you are talking about, so could you upload the right files?
Thanks for the effort!
afehst said:
I think you uploaded the wrong file, as the zip file you uploaded only contain one file (km8p), which has no file extension (it is probably a .zip file).
However it is missing the other files you are talking about, so could you upload the right files?
Thanks for the effort!
Click to expand...
Click to collapse
I attached the TWRP for Android 7 here, if you still need it.
I have also started a thread on how to root with Magisk instead of supersu, as supersu wouldn't work for me.
https://forum.xda-developers.com/android-stick--console-computers/amlogic/howto-km8-p-2gb-8gb-s912-amlogic-tv-box-t3745937
Hi!
When i bought it, my honor 9 was a STF-AL00C00B201 (update to oreo via wifi was available).
I flashed it to "SERVICE FULL REPAIR" STF-L09C432B130 (no update to oreo yet).
I think that the biggest issue was on flashing oem from CN to EU.
I had issues flashing it but succeeded anyway.
Now I want to go back to STF-AL00C00B201 because of the app bundle and I wanna play around with integration of EMUI which was quite nice comparing to the current L09C432.
Can anyone help?
Thank you!
Hi! To go back to the STF-AL00C00B201, you need first of all an unlocked bootloader and a TWRP.
TWRP = https://forum.xda-developers.com/honor-9/development/oreo-t3754483
Then you will need to download these files and then copy them to the main directory of an SD card.
update.zip = http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2296/g1647/v122257/f1/full/update.zip
update_full_hw.zip = http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2296/g1647/v122257/f1/full/BND-AL00_alltele_cn/update_full_BND-AL00_alltele_cn.zip
update_data_full_public.zip = http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2296/g1647/v122257/f1/full/public/update_data_full_public.zip
You will have to rename the downloaded files as written before the " = " .
Finally you need to put the file located here https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279 along with the other files, then flash it. (the HuRUpdater file)
You can wipe data if you want, but i think it's better.
Hello everyone
I hope somebody can help me. I have a Huawei y6 scc-u21 that I need to fix. I have downloaded a firmware flash file to reflash the phone however, after doing so, I found that the gapps are not installed. I tried to download and install every update but still I did not have gapps installed.
Also, I noticed that after flashing and everytime I do a factory reset, the phone would not prompt me to a setup process and just automatically goes to the normal interface. Some settings are missing too.
Please help. Without GAPPS this phone is basically useless. Doesn't even get a signal even though a SIM card is inserted.
Thanks.
I had the same problem.. here is what i do to solve it:
1- download u21 cm2 backup file from here:
http://www.mobilekse.com/2018/09/huawei-y6-scc-u2131-all-file-firmware.html?m=1
2. Extract it with 7zip.
3 download an sd card update "update.app".
4. install the update with sd card.
5- extract the file with "huawei update extractor" and get "BOOT.img" , "ABOOT.img" and "CUST.img" rename them to lowercase and put them to the folder of the first firmware of step 1/
6- open qfil, select flat buit, select the programmer path from the firmware folder then select from the top: tools then partition manager.
7- select boot.img partition and with a right click select manage partition.
8- choose the boot.img extracted and replaced.
9- do the same for aboot.img and cust.img
10- the phone will exit this dump mode and you will find playstore, keyboard, notfications..
Ask me if you found anything not clear