Ok i was in recovery mode and i had planned on installing a ROM called Megatron(makes cpu faster). I had a bad signal on my computer so i decided to hold off on downloading the ROM. However, i remember downloading a theme and i saw the update.zip file on my desktop. I copied it to the root of my sdcard and on my phone it read,"update.zip.zip"(didnt really bother me because i figured it was STILL considered a .zip file). Anyway, I flashed it from the sdcard and i tried to reboot my phone and it went normal until it got to the Android logo. It would have the sleek light going across the logo but then it would freeze, go blank, then come back and do the same thing again. Now i tried to backup my phone before doing this but when i tried, it wouldnt let me and it told me to do it from the adb(I dont know how). Its obvious im new to this. I dont think its bricked because it turns on and i really dont know if i voided the warranty on it or not. PLEASE HELP ME!
You're bootlooping. I'm not very advanced in all this just yet, but after reading through different forums you gotta flash a factory rom.
http://www.lg.com/us/support/mc-support/mobile-phone-support.jsp
If that doesnt work, find a .zip file of the original firmware and flash it through recovery.
i am hoping that i did not brick my phone as i just spent $600 to go get the bloody thing. i flashed darkcore kernel onto it and it was fine. the phone was fine until i went to go change the battery icon (the phone is a samsung i9000 galaxy s) it boots into recovery but when i go to do a normal boot it littraly freezes at the boot screen and thats it i left it on the table for HALF AN HOUR and when i came back it was still on the boot screen . the boot screen says galaxy s gt-i9000 (white writing) powered by darkcore and darkysrom (green writing) please help me i hope i have no bricked my phone as i am a noob to android as i have only had my phone a few days. do i need to replace the modem on the phone ? or the kernel? please if someone knows to get in contact with me. i have odin and superoneclick installed on my pc. i have wiped everything off my phone wipe data/factory reset but that doesnt do anything diffrent. it simply stays on the boot screen. i have not flashed a custom rom onto my galaxy it only has a custom kernel.
FaZeHaViiK,
I can't help you but I recommend you change your topic to fit your problem. Maybe then people would check your post out.
how do i do that ??
FaZeHaViiK said:
how do i do that ??
Click to expand...
Click to collapse
OK it is simple really. What did you do when it started causing issues? You tried to change the icon, so undo your changes. You didn't say how you tried to change it at all so not sure what steps you have to take. Also please do the proper research before you do something that can't be fixed
Sent from my Inspire 4G using Tapatalk 2
Android phones are REALLY REALLY hard to brick. what you need to do, is get yourself a factory default rom, and start over where you messed up. Messing with these phones is all trial and error. I have bricked my samsung fascinate over 30 times im sure, hell almost 10 times last night as im porting miui v4 to my phone. Dont freak out learn what ODIN is, and get it fixed.
zeruth said:
Android phones are REALLY REALLY hard to brick. what you need to do, is get yourself a factory default rom, and start over where you messed up. Messing with these phones is all trial and error. I have bricked my samsung fascinate over 30 times im sure, hell almost 10 times last night as im porting miui v4 to my phone. Dont freak out learn what ODIN is, and get it fixed.
Click to expand...
Click to collapse
Not all android phones are hard to brick. Take a look at the SGS II and the Euro Note that were perm bricked from a wiping data. No JTAG recovery would fix it. Also there are many ways to brick a device and as you recovered it. You didnt brick it. Bricking it makes it non recoverable except by Jtag. Too many people use this word wrong.
On a side note... Why would you spend 600 dollars on that phone?
Samsung problems
i really have no idea why i spent so much on it lol and i used the android app "DarkyODA" i think it was i flashed CwM DarkCore v3.0.2.8x kernel onto it via DarkyODA and it was fine after that but until i went to change the battery icon on the DarkyODA app then i went to reboot my phone and now its stuck at the boot screen i left it on overnight on the boot screen to see if it would reboot got up in the morning and it still was on the boot screen, i can get into the recovery menu but thats about it, i have been trying to find a stock kernel and rom for my phone but i simply cannot find one (build number xwjvp), i think its the battery icon thats making the phone freeze at the boot screen ive done a full system wipe but that didnt fix it, and i cannot remove the icon as i installed it on the darky app (which i cannot access as i cannot get past the boot screen), do i need to flash a stock rom and kernel or just a stock rom ? do you reckon that would fix my phone ? as i do not want to go and spend another $450 to get samsung to fix it (lol) i have odin 1.85 and i went to go flash voodoo kernel xwjvp v1.3 through odin but it got stuck half way through............
I have an i9205 that I am trying to fix for somebody. The phone was acting weird so he rebooted it and did a battery pull. After doing so the phone would just sit on the samsung boot screen. I could boot into download mode, but if you went into recovery mode it just said installing update. It would get to 100% restart and then just sit on the samsung logo. Everytime you booted into recovery it would do this. I downloaded kies and tried to reflash the phone. during the flash an error popped up and said to retry in emergency mode. That also failed and phone said "sw rev check fail fused 1 binary 0" on the screen. I am thinking now the only option is probably to flash with odin, but was wondering if anyone else had any ideas. thank you
After flashing a lot of samsung phone, I think the best way to reflash is Odin. Try to download the firmware you want and flash it with Odin. And then, reboot. This always save my phones.
For your recovery, have you tried to update your phone with OTA ? The download may be incomplete and make a soft brick.
Sorry for bad english I'm french.
Thanks for the reply. ya thats what I am going to try. There are a ton firmwares based on country and I am trying to figure out which one I need. It is not my phone so I am not sure if he tried to do an ota, but I think thats probably what happened. Tried to do an ota, phone ran poorly, hard rebooted, and finally resulted in a softbrick. I think that may be why the recovery boot keeps saying installing update as well. Also your English was not bad at all.
Great, let me know if that solution solve your problem.
If it don't, it should not but it's possible, try with pit file (never had to use it so it's really in case it don't work correctly).
Hi,
I have one hard bricked Galaxy Note Pro 12.1 2014 Version tablet I bricked while loading custom ROM. I mistakenly popped out the external sd card that the rom was installing from. I was having some trouble with battery issues and was thinking a fresh install of the custom rom would fix it.
When the external card popped out while the rom was loading from the screen said it failed. On reboot the screen goes thru Galaxy logo then goes black. I tried installing recovery images and whatnot thru odin. Some would pass some would fail. And on reboot it just goes thru logo then goes black. I could see its on but nothing else. It does accept a charge though.
Its probably completely broken and at a complete loss but I thought maybe there was some chance. I think it might be possible to repartition or something to that affect but thought I'd see what is possible.
FYI: Not under warranty. Knox is tripped. I am willing to provide a $50 reward to whomever can walk me thru a possible fix. Yeah I know, if you help and it works again I could just say it still doesn't work but all I can offer is my word that you will be rewarded if it gets fixed.
Thank you for any positive feedback.
Tom
Solved
Kies was able to fix this problem. I tried odin a recovery tar , everything numerous times, even kies several times, nothing would do it. Also tried odin a stock rom and that helped a tiny bit. After installing stock rom several times (at first it didnt want to and would fail) it finally did go thru on like the 3rd try installed and passed. But then it would only go to samsung logo and lock up. This morning it tried kies again and miraculously it didnt lock up like it did before and install all the way thru. On reboot it went past logo and turned on completely as new. Moral of the story, have faith and dont give up. I almost trashed this thing and was ready to press the buy it now button for a new one but I decided to insanely try again as if some miracle might happen. And sure as sh#t a miracle happened.
Hello forum people, I need help to revive my S3 i9300, if you could help me I would really appreciate it.
I tell what I remember about the problem:
The phone was rooteado to be able to use it with any company since it was of movistar. a year ago with the rootking (we sent it to root), the phone was my dad and now has a new one, and it stopped using about 2-3 months.
Then I lent it to a friend who had just broken his cell, so I gave it to him so he has something until he buys one, but he told me that it did not work because he did not load and unload very quickly. He gave it back to me and I stopped using it until about 1 month ago, that I was left without a cell phone and I want to use it to have something.
The same thing happens as it does not load and it is very easy to download, BUT if you use the charger and cable of the Huawei ascend Mate 7 that my dad has, it charges perfectly and the cargo is not cut at all.
Well, seeing that this happened, I restarted it from the factory (I guess the root will be removed with that).
It was still branded and only loaded with the charger and the Huawei cable ...
Well now I tell what happened with what I did.
I install the samsung drivers for the compu, install odin 3.10.6 and under the recovery file that I put up, well I install everything but when I realized instead I read fast and instead of saying PDA said AP in the odin.
Well I try to turn it on and it does not turn on, I try to enter into recovery mode and it does not start.
Then I install another odin, version 1.30 and have a PDA, I do everything as I say start the phone in download mode, home odin, connect the phone to the computer, put the file in pda and give start.
He tells me that everything went well but still does not turn on and without going into recovery mode.
Say that when I do recovery mode (volume up, home and power) I see the logo of samsung and like that desinstegra, then it appears again and blinks in blue but as if it were broken and the logo moves. In short broken.
Then then install another recovery, https://dl.twrp.me/i9300/twrp-3.0.2-...0.img.tar.html
Now I want to enter into recovery mode but this appears and I want to touch some option that appears but nothing, as if the touch was dead.
And after that, it seems to me that I tried to change the Kernel and I put any but the one of my model by mistake.
Current status of the s3:
It lights normally but it takes a long time.
Enter DOWNLOAD mode (vol down, home and Power)
The screen touch does not work but it does show an image.
The buttons work, also the easy button of back and home.
DO NOT enter RECOVER mode (vol up, home and power) is frozen in the Samsung logo.
I want to make it work with any other rom that is functional except the STOCK. And that transforms into unlocekd
It does not matter if when I install a new ROM the files are deleted, I do not have anything in the phone.
Thank you very much to those who respond.
Only to get sure, that I understood you right:
after flashing the wrong kernel, your touch in twrp is not working anymore?
Will say the device is not reacting when you press a button on the screen with your fingers? If so than, I am afraid that your touch is broken. What kernel did you use? Can you post the name of the zip or tar file?
Beside of that, after flashing samsung stock, the reboot will last quite long. Maybe around 15 min till up to 25 or 30. And after flashing and before reboot, go to recovery and make a factory reset. Cross my fingers... :fingers-crossed:
rodman01 said:
Only to get sure, that I understood you right:
after flashing the wrong kernel, your touch in twrp is not working anymore?
Will say the device is not reacting when you press a button on the screen with your fingers? If so than, I am afraid that your touch is broken. What kernel did you use? Can you post the name of the zip or tar file?
Beside of that, after flashing samsung stock, the reboot will last quite long. Maybe around 15 min till up to 25 or 30. And after flashing and before reboot, go to recovery and make a factory reset. Cross my fingers... :fingers-crossed:
Click to expand...
Click to collapse
Hello, if I think that the Kernel had changed I do not remember exactly what it was because I downloaded it on a page written in Asian language by mistake and the Google translator confused the words and he said it was from the s3 but I think it was from the note 3.
The tactile does not respond exactly.
I did not understand him completely, he wants me to enter RECOVERY mode (it takes about 15-20 min to enter) and then do a factory reset?
I almost forgot to clarify that I had tried to do this from the video: https://www.youtube.com/watch?v=fA86_HFGx_w
Everything was installed perfect and I did it as is, except to delete.
Or reinstall the factory rom to see if it worked again.
If you flashed a kernel from note3 that the touch will be most probably minimum damaged and does not work proper anymore. I flashed mistakenly the kernel from the note2 and touch was broken, but maybe you were lucky and your touch is still working. No, passing into recovery should take only a few seconds, but rebooting into system after flashing samsung stock, then in recovery, then wiping and factory reset, could take a rather long time.
rodman01 said:
If you flashed a kernel from note3 that the touch will be most probably minimum damaged and does not work proper anymore. I flashed mistakenly the kernel from the note2 and touch was broken, but maybe you were lucky and your touch is still working. No, passing into recovery should take only a few seconds, but rebooting into system after flashing samsung stock, then in recovery, then wiping and factory reset, could take a rather long time.
Click to expand...
Click to collapse
Could you tell me how to do it please? I'm not an expert at all in changing ROM.
but you wrote that you already flashed something (?) via odin? I understood that you flashed samsung stock rom, beside kernel and twrp to proof, whether phone is working with original sw? If not than please check and search the i9300 forum section, there are a few of howtos and todo threads and posts which explains it even more better, that I could ever do
Edit: for example:
https://forum.xda-developers.com/galaxy-s3/general/samsung-galaxy-s3-sticky-roll-thread-t2344125 and from there for example
https://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
rodman01 said:
but you wrote that you already flashed something (?) via odin? I understood that you flashed samsung stock rom, beside kernel and twrp to proof, whether phone is working with original sw? If not than please check and search the i9300 forum section, there are a few of howtos and todo threads and posts which explains it even more better, that I could ever do
Click to expand...
Click to collapse
I used odin but I forgot how I had done and had followed the steps of a tutorial that I lost the link.
check my edited post above, now with links to guides and one of the best feature here on xda is the search button and that we have many things to read
rodman01 said:
check my edited post above, now with links to guides and one of the best feature here on xda is the search button and that we have many things to read
Click to expand...
Click to collapse
Hello, thank you very much for the links that you have passed me. They will be very useful, excuse me but I do not want to be irritating at all but I am really lost.
My only question is to know how to start reliving it?
I start installing CWN and then change the ROM?
I would recommend to start with flashing the original samsung stock sw via odin. To see that everything is working as it should. If it is so, especially your touch, than you can go ahead with routing, flashing an alternative recovery and testing custom roms, like leo or pie as you posted in the other thread. The time you are spending with writing here and in the second thread you could have already finished the sw flash and reboot to system to check the health of your device. Others than that procedure is a waste of time in my opinion. But thats your decision. On the other hand, we, or better I wouldn't spoon feed you further, because you can find almost everything for that years old device here with search, read read and read.
rodman01 said:
I would recommend to start with flashing the original samsung stock sw via odin. To see that everything is working as it should. If it is so, especially your touch, than you can go ahead with routing, flashing an alternative recovery and testing custom roms, like leo or pie as you posted in the other thread. The time you are spending with writing here and in the second thread you could have already finished the sw flash and reboot to system to check the health of your device. Others than that procedure is a waste of time in my opinion. But thats your decision. On the other hand, we, or better I wouldn't spoon feed you further, because you can find almost everything for that years old device here with search, read read and read.
Click to expand...
Click to collapse
Hello, I did the following, I had tried to re-install the stock stock a few days ago and it did not work, I did it for odin.
So what I did today was, install the recovery mode of ClockWorkMod and probe with the rom of MIUI 8 and that of Linage16, no installation. Then try with this: https://forum.xda-developers.com/galaxy-s3/development/rom-t3442868 And install correctly but it does not work, pass the Samsung logo but then when the ROM logo appears it stays there frozen and restarts ... it seems to me that officially the phone is dead.
Again: the right stock samsung sw should work if flash via odin didn't fail and, what I already mentioned, after flashing you did a factory reset in recovery. After that the reboot into system could take several minutes. Otherwise you can try it with repartition efs backup restore etc etc etc.
btw: newer custom roms, like leo-16, cannot be flashed with the old cwm recovery and cwm touch recovery, as you mentioned in the related thread, would not make much sense, if your touch is broken!?! If you do not want to go via samsung stock sw, then get a newer twrp, search for info which one is suitable, and guides how to flash custom roms, and flash the preferred one of your choice.