[HELP] S3 GT i9300 killed by bad installation of ROM - Galaxy S III Q&A, Help & Troubleshooting

Hello forum people, I need help to revive my S3 i9300, if you could help me I would really appreciate it.
I tell what I remember about the problem:
The phone was rooteado to be able to use it with any company since it was of movistar. a year ago with the rootking (we sent it to root), the phone was my dad and now has a new one, and it stopped using about 2-3 months.
Then I lent it to a friend who had just broken his cell, so I gave it to him so he has something until he buys one, but he told me that it did not work because he did not load and unload very quickly. He gave it back to me and I stopped using it until about 1 month ago, that I was left without a cell phone and I want to use it to have something.
The same thing happens as it does not load and it is very easy to download, BUT if you use the charger and cable of the Huawei ascend Mate 7 that my dad has, it charges perfectly and the cargo is not cut at all.
Well, seeing that this happened, I restarted it from the factory (I guess the root will be removed with that).
It was still branded and only loaded with the charger and the Huawei cable ...
Well now I tell what happened with what I did.
I install the samsung drivers for the compu, install odin 3.10.6 and under the recovery file that I put up, well I install everything but when I realized instead I read fast and instead of saying PDA said AP in the odin.
Well I try to turn it on and it does not turn on, I try to enter into recovery mode and it does not start.
Then I install another odin, version 1.30 and have a PDA, I do everything as I say start the phone in download mode, home odin, connect the phone to the computer, put the file in pda and give start.
He tells me that everything went well but still does not turn on and without going into recovery mode.
Say that when I do recovery mode (volume up, home and power) I see the logo of samsung and like that desinstegra, then it appears again and blinks in blue but as if it were broken and the logo moves. In short broken.
Then then install another recovery, https://dl.twrp.me/i9300/twrp-3.0.2-...0.img.tar.html
Now I want to enter into recovery mode but this appears and I want to touch some option that appears but nothing, as if the touch was dead.
And after that, it seems to me that I tried to change the Kernel and I put any but the one of my model by mistake.
Current status of the s3:
It lights normally but it takes a long time.
Enter DOWNLOAD mode (vol down, home and Power)
The screen touch does not work but it does show an image.
The buttons work, also the easy button of back and home.
DO NOT enter RECOVER mode (vol up, home and power) is frozen in the Samsung logo.
I want to make it work with any other rom that is functional except the STOCK. And that transforms into unlocekd
It does not matter if when I install a new ROM the files are deleted, I do not have anything in the phone.
Thank you very much to those who respond.

---

Only to get sure, that I understood you right:
after flashing the wrong kernel, your touch in twrp is not working anymore?
Will say the device is not reacting when you press a button on the screen with your fingers? If so than, I am afraid that your touch is broken. What kernel did you use? Can you post the name of the zip or tar file?
Beside of that, after flashing samsung stock, the reboot will last quite long. Maybe around 15 min till up to 25 or 30. And after flashing and before reboot, go to recovery and make a factory reset. Cross my fingers... :fingers-crossed:

---

rodman01 said:
Only to get sure, that I understood you right:
after flashing the wrong kernel, your touch in twrp is not working anymore?
Will say the device is not reacting when you press a button on the screen with your fingers? If so than, I am afraid that your touch is broken. What kernel did you use? Can you post the name of the zip or tar file?
Beside of that, after flashing samsung stock, the reboot will last quite long. Maybe around 15 min till up to 25 or 30. And after flashing and before reboot, go to recovery and make a factory reset. Cross my fingers... :fingers-crossed:
Click to expand...
Click to collapse
Hello, if I think that the Kernel had changed I do not remember exactly what it was because I downloaded it on a page written in Asian language by mistake and the Google translator confused the words and he said it was from the s3 but I think it was from the note 3.
The tactile does not respond exactly.
I did not understand him completely, he wants me to enter RECOVERY mode (it takes about 15-20 min to enter) and then do a factory reset?

---

I almost forgot to clarify that I had tried to do this from the video: https://www.youtube.com/watch?v=fA86_HFGx_w
Everything was installed perfect and I did it as is, except to delete.
Or reinstall the factory rom to see if it worked again.

---

If you flashed a kernel from note3 that the touch will be most probably minimum damaged and does not work proper anymore. I flashed mistakenly the kernel from the note2 and touch was broken, but maybe you were lucky and your touch is still working. No, passing into recovery should take only a few seconds, but rebooting into system after flashing samsung stock, then in recovery, then wiping and factory reset, could take a rather long time.

---

rodman01 said:
If you flashed a kernel from note3 that the touch will be most probably minimum damaged and does not work proper anymore. I flashed mistakenly the kernel from the note2 and touch was broken, but maybe you were lucky and your touch is still working. No, passing into recovery should take only a few seconds, but rebooting into system after flashing samsung stock, then in recovery, then wiping and factory reset, could take a rather long time.
Click to expand...
Click to collapse
Could you tell me how to do it please? I'm not an expert at all in changing ROM.

---

but you wrote that you already flashed something (?) via odin? I understood that you flashed samsung stock rom, beside kernel and twrp to proof, whether phone is working with original sw? If not than please check and search the i9300 forum section, there are a few of howtos and todo threads and posts which explains it even more better, that I could ever do
Edit: for example:
https://forum.xda-developers.com/galaxy-s3/general/samsung-galaxy-s3-sticky-roll-thread-t2344125 and from there for example
https://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969

---

rodman01 said:
but you wrote that you already flashed something (?) via odin? I understood that you flashed samsung stock rom, beside kernel and twrp to proof, whether phone is working with original sw? If not than please check and search the i9300 forum section, there are a few of howtos and todo threads and posts which explains it even more better, that I could ever do
Click to expand...
Click to collapse
I used odin but I forgot how I had done and had followed the steps of a tutorial that I lost the link.

---

check my edited post above, now with links to guides and one of the best feature here on xda is the search button and that we have many things to read

---

rodman01 said:
check my edited post above, now with links to guides and one of the best feature here on xda is the search button and that we have many things to read
Click to expand...
Click to collapse
Hello, thank you very much for the links that you have passed me. They will be very useful, excuse me but I do not want to be irritating at all but I am really lost.
My only question is to know how to start reliving it?
I start installing CWN and then change the ROM?

---

I would recommend to start with flashing the original samsung stock sw via odin. To see that everything is working as it should. If it is so, especially your touch, than you can go ahead with routing, flashing an alternative recovery and testing custom roms, like leo or pie as you posted in the other thread. The time you are spending with writing here and in the second thread you could have already finished the sw flash and reboot to system to check the health of your device. Others than that procedure is a waste of time in my opinion. But thats your decision. On the other hand, we, or better I wouldn't spoon feed you further, because you can find almost everything for that years old device here with search, read read and read.

---

rodman01 said:
I would recommend to start with flashing the original samsung stock sw via odin. To see that everything is working as it should. If it is so, especially your touch, than you can go ahead with routing, flashing an alternative recovery and testing custom roms, like leo or pie as you posted in the other thread. The time you are spending with writing here and in the second thread you could have already finished the sw flash and reboot to system to check the health of your device. Others than that procedure is a waste of time in my opinion. But thats your decision. On the other hand, we, or better I wouldn't spoon feed you further, because you can find almost everything for that years old device here with search, read read and read.
Click to expand...
Click to collapse
Hello, I did the following, I had tried to re-install the stock stock a few days ago and it did not work, I did it for odin.
So what I did today was, install the recovery mode of ClockWorkMod and probe with the rom of MIUI 8 and that of Linage16, no installation. Then try with this: https://forum.xda-developers.com/galaxy-s3/development/rom-t3442868 And install correctly but it does not work, pass the Samsung logo but then when the ROM logo appears it stays there frozen and restarts ... it seems to me that officially the phone is dead.

---

Again: the right stock samsung sw should work if flash via odin didn't fail and, what I already mentioned, after flashing you did a factory reset in recovery. After that the reboot into system could take several minutes. Otherwise you can try it with repartition efs backup restore etc etc etc.
btw: newer custom roms, like leo-16, cannot be flashed with the old cwm recovery and cwm touch recovery, as you mentioned in the related thread, would not make much sense, if your touch is broken!?! If you do not want to go via samsung stock sw, then get a newer twrp, search for info which one is suitable, and guides how to flash custom roms, and flash the preferred one of your choice.