Hello,
I have a problem, sometimes the screen think I touch it but I don't touch it...
I press one area and the phone do like I have touched it a lot of quickly.
I have this problem with all ROMs tested: PAC 4.3, few 4.4, thus I think it's an hardware problem.
If I clean my screen with cloth it's okay, but sometimes the screen is very clean when the problem come.
There is a way to change screen sensitivity or other testing software or... ?
Thx
Indeed there is. You're already rooted, so problem solved.
http://forum.xda-developers.com/showthread.php?t=2522657
Sent from my C6806_GPe using Tapatalk
Well done John!!! :good:
Related
I just bought a archos 101 g9 when it was on sale on woot last week and so far it is working pretty good, however I have an annoying problem with it.
If it has been sleeping for over a few minutes (regular sleep, not the deep sleep) and I wake it back up the touch screen goes crazy. The bottom left corner keeps detecting a touch event. It will cycle from multiple on/off touches a second to one on/off every few seconds. If I rotate the tablet to portrait, it will start scrolling the screen none stop to the left. So far the only fix is to do a reboot.
It does not happen every time, just occasionally when I wake it up from sleep.
Today i got a case for it, and whenever it is in the case, the touch screen goes crazy. Same touch events in that same area.
I am guessing something is wrong with the digitizer. Anyone else seen this problem before?
Have the same problem, and as I've read on xda and archosfans forums, this isn't an uncommon issue. We'll just have to wait for a firmware update, as rebooting seems to fix it, so it doesn't seem to be a hardware problem.
Sent from my ARCHOS 101G9 using Tapatalk 2
I have exactly the same problems.
@ARCHOS: PLEASE FIX THIS PROBLEM. THIS IS A SERIOUS BUG !
Sensitive Touch
I have similar problems with the touchscreen. If I'm holding it with one hand by a corner, it detects touch. The rest of the time it is a little jittery and releases or double taps in games. It's still not a deal breaker, though.
I hope we don't have to swap digitizers to fix it.
Hi !
Me too
...works fine after Touch Screen Calibrate , but the next reboot do the same !
surdu_petru said:
Hi !
Me too
...works fine after Touch Screen Calibrate , but the next reboot do the same !
Click to expand...
Click to collapse
I'll give that a try and see if that works. I just got a case and as soon as it is in the case it is even worse.
EDIT: I installed a calibration app on xda and it really made it worse!
What app are you using to calibrate it?
I have a similar issue sometimes.
For me the fix is simply to clean the screen.
The strange thing is, it happens even when the screen doesn't appear to be especially dirty but I put the tablet to sleep, give the screen a serious clean with a microfibre cloth and the touchscreen issues vanish.
Could be a different issue to what you guys are having but the symptoms are the same and it's an easy 'fix' to try.
Hope it helps.
Sent from my ARCHOS 80G9 using xda app-developers app
feffrey said:
I'll give that a try and see if that works. I just got a case and as soon as it is in the case it is even worse.
EDIT: I installed a calibration app on xda and it really made it worse!
What app are you using to calibrate it?
Click to expand...
Click to collapse
Use the inbuilt one, Settings > Repair & formatting > Touch screen calibration.
Sent from my GT-I9001 using Tapatalk 2
omegaRED7 said:
Use the inbuilt one, Settings > Repair & formatting > Touch screen calibration.
Sent from my GT-I9001 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, I had not noticed that area in the settings before. Recalibrating it in the cover has helped a lot.
I pretty much had this since day 1......
The current state is ; it doesn't work at all then all of a sudden It will pop back into life and then pretty much go "mental" as already described, I also found it reacts poorly to minor temperature variations, i.e going from outside to inside and general day to day travelling. Recalibrating used to "help" but now has no effect.
From watching the debug logs part of me thinks it's a bit of both, hardware and software ( just a hunch ) I noticed the driver fail to get a "ping" response from the hardware a couple of times.
I've pratically given up on it myself and plugged a keyboard and mouse in via a hub on the full size usb...... The hub has now stopped working for some reason , I'm now on a OTG Keyboard with a Virtual Mouse Driver using the numeric keypad and some adb input trickery ,
I've got another touch screen/digitizer to plug in, just not got round to putting it in yet and a little part of me is starting to enjoy finding more elaborate ways of interacting with the device... :laugh:
Does anyone know who the OEM of the digitizer Unit is? My previous investigation led me to china but information seems to be thin on the ground with this one
surdu_petru said:
Hi !
Me too
...works fine after Touch Screen Calibrate , but the next reboot do the same !
Click to expand...
Click to collapse
Same problem and even managed a RMA from ARCHOS. Thing is your OC edition fixed it for me.
Hi
Cutting a long story short, is there a screen calibration app/menu option for the S3? I cracked my screen the other week, and I have had the screen replaced (not by samsung). Ive noticed now that the screen intermittenly sometimes sticks, becomes non responsive and/or the image "vibrates" when I long press on an app to move it. OR when I try to hang up a call, 9/10 times the press doesnt "register"
Before I go and moan at the shop I got it repaired at, is there any app or any way of calibrating the screen ?
I should mention that the phone is not running a stock rom. It wasnt before the screen was replaced and everything ran flawlessly, even with the crack Now I'm no expert but I would suggest they've either fitted a dodgy screen / there's a loose connection or it needs calibration.
If anyone's wondering it is on Temasek's CM11 unofficial build. Although I had it on CM 11 for a while and the problem persisted.
I suspect it is a hardware issue with the replacement screen but I thought I'd ask.
Cheers
Andrew
Flash a full stock rom to test but it sounds like you've a hardware fault.
*#0*#
This is screen test function of sammy based roms. if you want you can try your screen with this
You cant calibrate capacitive screens
GT-I9300 cihazımdan Tapatalk kullanılarak gönderildi
If I remeber correctly this behavior happens when the screen is repaired without that special adhesive layer which originally glues everything together.
Back on stock rom, tried the calibration/diagnostic screen.... no dice, according to that it works ok lol.
It looks like I'm going back to the shop I got the repair done, to try and get them to fix it (again!) Bet they will try and charge me more money tbh I am almost at the point of living with it BUT I had two phone calls I could not answer today because the screen wasn't working properly, and that will not do
Edit :- found the accessibility options which allows me to answer/end calls using the hardware buttons. Still a bit gash but better than nothing.
Will see what the shop says, less urgent now, at least I have a way of answering the damn thing lol.
Hi all. My evos touchscreen is probably dying. Sometimes my screen goes crazy and doesnt react to touches. When I enable "visible" touches, one or more are visible on the bottom of screen. When I turn off and turn on display, everything is OK (sometimes not). Any solution? thx. ps.: i tried many roms.
wenna.speedy said:
Hi all. My evos touchscreen is probably dying. Sometimes my screen goes crazy and doesnt react to touches. When I enable "visible" touches, one or more are visible on the bottom of screen. When I turn off and turn on display, everything is OK (sometimes not). Any solution? thx. ps.: i tried many roms.
Click to expand...
Click to collapse
Knoen Evo problem - faulty digitizer. Only solution is to change your digitizer.
thanx
They have the same problem. -> http://forum.xda-developers.com/showthread.php?t=2747330
I dont think so, its digitizer trouble...
It is something with kernel, the screen is normal with some kernels but even with ics roms mirage kernel has got touch problem I am not a developer so I realy don't know to solve this problem
If any can help will be realy good
Prob
I sometimes hae the same issue, screen just doesn't respond?:cyclops:
I am rooted, and currently runny no-name ROM but rom doesnt seem to matter. My proximity senser is giving me issues. Testing it showed that if i cover it it will recognize it but then is stuck not sensing me removing it. I dont have any case or screen glass that is covering it. Anybody else having this issue?
Yes I have had this issue since day 1. Stock not rooted
Sent from my LG-H901 using Tapatalk
Have had the same issue since day one, 11/10/15. Not rooted. Aside from an ok battery life, this is the only problem I have with the LGV10.
i have this problem also.. its happening more and more when hanging up a call. I have to press the back button to get the screen back on.
Ludeape said:
i have this problem also.. its happening more and more when hanging up a call. I have to press the back button to get the screen back on.
Click to expand...
Click to collapse
Now it does it every call on mine, but test with app Aida64 works fine
Me too .. Any Fix can solve that ?
₪HuEx₪
I have a very irritating problem my device touch screen is responding even though it is black and locked. It keeps annoying me when i am in a call and it is only a matter of time till it ends the call. Problem started after having a screen replacement but i can hardly believe it is a screen problem because it is functioning normally and also gets dark when i am in a call. My proximity sensor is working as it should. It is like my screen gets dark and not totally off.
My phone is rooted and i am running lollipop 5.1.1 custom rom
Ma790 said:
I have a very irritating problem my device touch screen is responding even though it is black and locked. It keeps annoying me when i am in a call and it is only a matter of time till it ends the call. Problem started after having a screen replacement but i can hardly believe it is a screen problem because it is functioning normally and also gets dark when i am in a call. My proximity sensor is working as it should. It is like my screen gets dark and not totally off.
My phone is rooted and i am running lollipop 5.1.1 custom rom
Click to expand...
Click to collapse
It sounds like you are having ghost touch problem. This usually presents itself when you change the front glass with digitizer and leave the old LCD. This cannot be repaired if this is the case. I dont think this is a sw problem. When did this issue started to manifest itself? Right after the screen replacement or it started to appeare gradually?
Yes it appeared just after repairing the cracked screen. The lcd was working but not the touch and the glass was all cracked.
How can i solve this?
5ageman said:
It sounds like you are having ghost touch problem. This usually presents itself when you change the front glass with digitizer and leave the old LCD. This cannot be repaired if this is the case. I dont think this is a sw problem. When did this issue started to manifest itself? Right after the screen replacement or it started to appeare gradually?
Click to expand...
Click to collapse
One thing to mention is that i do not get touches that i didn't make. They are just getting read when the screen shouldn't read them.
Ma790 said:
One thing to mention is that i do not get touches that i didn't make. They are just getting read when the screen shouldn't read them.
Click to expand...
Click to collapse
But does touch work normally when you use the phone? Ghost touch can manifest itself on various ways, like your case or can go completely crazy when the screen is on. You can try some apps that resolve ghost touch like touch fixer. Some people are saying that unlocking BL and flashing CM resolves this issue and other sollutions you can try is to apply heat with heat gun or hair drier directly on the screen to make sure the glue is sticking the digitizer onto the LCD propperly, or fiddle with the flat cable contacts bit by bit until the touch is working properly but this requires disassembling the device again. You can alway try to flash different firmware to see if it'll resolve your issue but I highly doubt it will. GL
5ageman said:
But does touch work normally when you use the phone? Ghost touch can manifest itself on various ways, like your case or can go completely crazy when the screen is on. You can try some apps that resolve ghost touch like touch fixer. Some people are saying that unlocking BL and flashing CM resolves this issue and other sollutions you can try is to apply heat with heat gun or hair drier directly on the screen to make sure the glue is sticking the digitizer onto the LCD propperly, or fiddle with the flat cable contacts bit by bit until the touch is working properly but this requires disassembling the device again. You can alway try to flash different firmware to see if it'll resolve your issue but I highly doubt it will. GL
Click to expand...
Click to collapse
Tried another rom and it is working as it should!! thank you for your help