I've read in other forums that the Wacom Bamboo Feel (CS300UK) line of stylus's do not line up correctly, with the tip being offset by 1/8th of an inch or more, which is really maddening when you're trying to do some detailed art. In the Note 10.1 2014 forum there's a thread devoted to how many of these stylus's suck and are offset, including the CS300UK2, which people still aren't sure of if it's a new version or a different region product code of the same pen. Whichever it is, this is about the easy to get Best Buy and Amazon sold version, CS300UK.
Still, after reading all of that, I gave it a shot and it really was crap. Way offset! I was about to return it, when I decided to get out the X-acto blade and see what I could do.
I've attached a finished version of what my pen looks like now. Not the prettiest thing, but it lines up perfectly for me now and took WAY less time to do than it did for me to write all this out. haha
1- Pull out the nib that's currently in the pen.
2- Whittle down the tip of the pen until you start to see the first bit of innards in it. With my X-acto, it was really easy to cut, not a hard plastic at all.
In the image attached, you can see a small black circle inside the cut grey part. That is where I've decided to stop. Not sure what it does but looks like it shouldn't be sliced up...
3- Trim the nib. I've labeled in the image the bit of nib that I trimmed. This was photographed on the top of the back of the Bamboo nib box so you can see the size, but it is a small amount, like 1/8 of an inch or so. With your basic nail clippers, I clipped it from the "bottom" of the nib, which is slightly less round than the top, but I doubt it matters which you clip.
So yeah, slip the nib back in the pen and you're done. It should be lined up.
The two photos on the right of the attached image show what it looks like held from the left and right at a pretty decent angle, my "natural" drawing angle. Basically spot on. Tested in a bunch of places around the tablet and it all matches up.
Good luck to anyone who tries this! Also, don't blame me if you screw up your pen.
Now, if only Wacom could put out a pen that is this little bit shorter for these newer Note's...
slackersink said:
Now, if only Wacom could put out a pen that is this little bit shorter for these newer Note's...
Click to expand...
Click to collapse
Version 2 has been out for quite some time. (UK2 or UW2)
http://www.wacom.com/en/us/everyday/bamboo-stylus-feel-samsung-galaxy-note
Sent via Tapatalk and my thumbs.
wingdo said:
Version 2 has been out for quite some time. (UK2 or UW2)
http://www.wacom.com/en/us/everyday/bamboo-stylus-feel-samsung-galaxy-note
Sent via Tapatalk and my thumbs.
Click to expand...
Click to collapse
People are still experiencing an offset with that, as well. I browsed all through the 10.1 2014 thread about it http://forum.xda-developers.com/showthread.php?t=2484014
Specifically http://forum.xda-developers.com/showpost.php?p=47180938&postcount=46 from a quick search in that thread.
As they're both Samsung products put out at about the same time, I am using the assumption that they will have similar tech when it comes to the digitizer and how it reacts to the Feel pens. The Note 3 will probably have that, too. Older digitizers might not do so good, though. haha
Here's a link where I screencapped someone's test video: http://forum.xda-developers.com/showpost.php?p=50693780&postcount=179
At least from the angle, there seems to be an offset from the UK2. He's on the line with the pen, but the drawn line is under that line.
I have the V2 and have no offset issues. From a screen shot taken from a side angle, yes there appears to be an offset, but the big question is "is there an offset from the eye position of the writer" not is there an offset for someone watching from the side. It's like looking at a speedometer from the driver's seat vs. the passenger seat. You will not get the same reading as you will from the other position.
Sent via Tapatalk and my thumbs.
Some say they like it and others are still saying their V2's are off, but if you do have one that works properly and you're happy with it, that's all that matters.
Does the back of this pen work as an eraser?
I was finally able to test the wacom pen with eraser that came with my Toshiba laptop. No surprise, it has the same 2-3 mm offset when the pen is held at an angle. Too bad because it's nice to have the easy eraser which does work as expected. I'll probably end up ordering the big s-pen now...
Also, I did try adjusting the calibration screws under the button to no avail...
Sent from my SM-P900 using Tapatalk
I have this pen from a previous note and it does work well with no offset. The eraser works as well. It was only $29 the last time I bought it and now I see it listed alot more. http://www.ebay.com/itm/Genuine-Sam...0862790937?pt=US_Styluses&hash=item35c07ea119
tonyz3 said:
I have this pen from a previous note and it does work well with no offset. The eraser works as well. It was only $29 the last time I bought it and now I see it listed alot more. http://www.ebay.com/itm/Genuine-Sam...0862790937?pt=US_Styluses&hash=item35c07ea119
Click to expand...
Click to collapse
Got mine on Amazon for $19.99.
ExtremeRyno said:
Got mine on Amazon for $19.99.
Click to expand...
Click to collapse
Got mine for 15.99 on eBay. http://www.ebay.com/itm/Samsung-Gal...366?pt=US_Tablet_Styluses&hash=item2ece9d526e
Sent via Tapatalk and my thumbs.
wingdo said:
Got mine for 15.99 on eBay. http://www.ebay.com/itm/Samsung-Gal...366?pt=US_Tablet_Styluses&hash=item2ece9d526e
Sent via Tapatalk and my thumbs.
Click to expand...
Click to collapse
8.50 here can use promo code PAYDEALS to get about $1 off, I paid using amazon. http://www.paydeals.com/Samsung-Galaxy-Stylus-Eraser-Non-Retail/dp/B009QW3SGQ#.UxVAXPldXWg
kodochax said:
8.50 here can use promo code PAYDEALS to get about $1 off, I paid using amazon. http://www.paydeals.com/Samsung-Galaxy-Stylus-Eraser-Non-Retail/dp/B009QW3SGQ#.UxVAXPldXWg
Click to expand...
Click to collapse
Got mine for $2 outside walmart from a guy in a black trench coat full of note accessories
Sent from my SCH-I605 using XDA Premium 4 mobile app
Stole mine.
Lost mine
THANKS!!!
slackersink said:
I've read in other forums that the Wacom Bamboo Feel (CS300UK) line of stylus's do not line up correctly, with the tip being offset by 1/8th of an inch or more, which is really maddening when you're trying to do some detailed art. In the Note 10.1 2014 forum there's a thread devoted to how many of these stylus's suck and are offset, including the CS300UK2, which people still aren't sure of if it's a new version or a different region product code of the same pen. Whichever it is, this is about the easy to get Best Buy and Amazon sold version, CS300UK.
Still, after reading all of that, I gave it a shot and it really was crap. Way offset! I was about to return it, when I decided to get out the X-acto blade and see what I could do.
I've attached a finished version of what my pen looks like now. Not the prettiest thing, but it lines up perfectly for me now and took WAY less time to do than it did for me to write all this out. haha
1- Pull out the nib that's currently in the pen.
2- Whittle down the tip of the pen until you start to see the first bit of innards in it. With my X-acto, it was really easy to cut, not a hard plastic at all.
In the image attached, you can see a small black circle inside the cut grey part. That is where I've decided to stop. Not sure what it does but looks like it shouldn't be sliced up...
3- Trim the nib. I've labeled in the image the bit of nib that I trimmed. This was photographed on the top of the back of the Bamboo nib box so you can see the size, but it is a small amount, like 1/8 of an inch or so. With your basic nail clippers, I clipped it from the "bottom" of the nib, which is slightly less round than the top, but I doubt it matters which you clip.
So yeah, slip the nib back in the pen and you're done. It should be lined up.
The two photos on the right of the attached image show what it looks like held from the left and right at a pretty decent angle, my "natural" drawing angle. Basically spot on. Tested in a bunch of places around the tablet and it all matches up.
Good luck to anyone who tries this! Also, don't blame me if you screw up your pen.
Now, if only Wacom could put out a pen that is this little bit shorter for these newer Note's...
Click to expand...
Click to collapse
WOW worked like a charm thanks for posting!! Just be careful how short you cut the nib I found I cut it too short and had to gradually adjust the length on the spare.
Thanks
No offset issues on mine...
But then I did manually adjust the potentiometers in the pen, as one should do with every Wacom pen by default...........
ShadowLea said:
No offset issues on mine...
But then I did manually adjust the potentiometers in the pen, as one should do with every Wacom pen by default...........
Click to expand...
Click to collapse
Any chance you can share how to adjust the Bamboo? Wacom support told me it's a Samsung issue and very sporadic. I would appreciate the help so I don't have to return it.
The.
Earthdog said:
Any chance you can share how to adjust the Bamboo? Wacom support told me it's a Samsung issue and very sporadic. I would appreciate the help so I don't have to return it.
The.
Click to expand...
Click to collapse
Certainly!
There's two ways to go about this. The 'Viking equivalent of try this first' and the 'If that doesn't work, let's try the more technical one.'
Firstly, try giving it a good solid whack on the edge of a table. As ridiculous as that sounds (and makes you look), this does usually have an effect. Often, the nib isn't properly inserted, or sits at just the wrong angle. Brute force tends to work.
If that doesn't help, it's time for the proper technical solution. This works on pretty much any magnetic stylus with a button, including the Spen.
Requirements:
- A small flat screwdriver
- A non-cluttered room (preferably without carpets)
- The pen
- The tablet
Step 1) Carefully use the small screwdriver to pop off the button. You should be able to insert it along the side in the middle and then slide it towards the back end (where the fastener isunder the button).
The thing jumps, so be careful! (Hence the clean, carpet free room. I had to use a vacuum cleaner to recover mine once..) If the screwdriver doesn't work, try a needle or a razor (mind your fingers!).
Step 2) With the lid off, you'll see two dials.
The one closest to the tip of the pen adjusts the sensitivity.
The one closest to the cap adjusts the offset. This is the one we'll need to fix this issue. (Might as well tweak both whilst you're at it)
Carefully make tiny adjustments (and I mean really tiny) to these dials. Test it on the tab every time, you don't need to re-attach the button to test it. They go both ways, so play with it 'till you're satisfied with the result. (On my previous one I had to turn it a whole 85º, on my new one only 5º.)
Step 3) If you're happy with the result, click the button back on. It only fits one way, and needs to be inserted very much like a battery: one side first. (The side pointing towards the cap)
That's it
ShadowLea THANK YOU THANK YOU THANK YOU!!!!!!!!!!!!!! You are BRILLIANT!!!!!!!!
ShadowLea said:
Certainly!
There's two ways to go about this. The 'Viking equivalent of try this first' and the 'If that doesn't work, let's try the more technical one.'
Firstly, try giving it a good solid whack on the edge of a table. As ridiculous as that sounds (and makes you look), this does usually have an effect. Often, the nib isn't properly inserted, or sits at just the wrong angle. Brute force tends to work.
If that doesn't help, it's time for the proper technical solution. This works on pretty much any magnetic stylus with a button, including the Spen.
Requirements:
- A small flat screwdriver
- A non-cluttered room (preferably without carpets)
- The pen
- The tablet
Step 1) Carefully use the small screwdriver to pop off the button. You should be able to insert it along the side in the middle and then slide it towards the back end (where the fastener isunder the button).
The thing jumps, so be careful! (Hence the clean, carpet free room. I had to use a vacuum cleaner to recover mine once..) If the screwdriver doesn't work, try a needle or a razor (mind your fingers!).
Step 2) With the lid off, you'll see two dials.
The one closest to the tip of the pen adjusts the sensitivity.
The one closest to the cap adjusts the offset. This is the one we'll need to fix this issue. (Might as well tweak both whilst you're at it)
Carefully make tiny adjustments (and I mean really tiny) to these dials. Test it on the tab every time, you don't need to re-attach the button to test it. They go both ways, so play with it 'till you're satisfied with the result. (On my previous one I had to turn it a whole 85º, on my new one only 5º.)
Step 3) If you're happy with the result, click the button back on. It only fits one way, and needs to be inserted very much like a battery: one side first. (The side pointing towards the cap)
That's it
Click to expand...
Click to collapse
ShadowLea said:
Certainly!
....
Step 1) Carefully use the small screwdriver to pop off the button. You should be able to insert it along the side in the middle and then slide it towards the back end (where the fastener isunder the button).
...
Step 2) With the lid off, you'll see two dials.
The one closest to the tip of the pen adjusts the sensitivity.
The one closest to the cap adjusts the offset. This is the one we'll need to fix this issue. (Might as well tweak both whilst you're at it)
...
That's it
Click to expand...
Click to collapse
That was very helpful, but still took a bit of fidgeting to get it off. For anyone trying it at home, here is a picture of the guts. The two tabs on the left click into rectangular hole.
My problem was that I tried to slide a blade along the edge and the cross piece would not let that happen. Perhaps the best way is to pry at the left 1/3 of the length and let the middle bulge up.
Related
Just found a new stylus by wacom,bamboo stylus
http://www.wacom.eu/index2.asp?lang=en
Looks promising, should be due out this month. It has the thinnest nib of any stylus on the market, and since I take alot of stylus notes (maple paint and genial) I think this is a must have for me.
I have ordered it from their site, delivery is within 14 days, i am currently using the Boxwave one but like this one because it is the size of an average ball point pen which I would prefer. Hope it works as well as or better than the Boxwave. I went for it because of wacom's reputation.
Can be ordered from here:
http://eu.shop.wacom.eu/Bamboo/Bamboo-Stylus/Bamboo-Stylus?c=9149
ordered a dagi one as the bamboo looks pretty pricey for.....a possibly better designed rubber nub. I use a wacom tablet and know they make some nice stuff, but it doesn't seem to be much different than the cheaper alternatives out there.
The dagi should be interesting with the clear tip and red dot so you can see where you're pointing, gonna play around with autodesk sketchbook mobile with it.
lacrossev said:
ordered a dagi one ....The dagi should be interesting with the clear tip and red dot so you can see where you're pointing, gonna play around with autodesk sketchbook mobile with it.
Click to expand...
Click to collapse
I am interested to hear how this one works out. I am currently using a targus which works great for me. but want a little more precision. Please update this when you get it....
Think will order one, will give a review of it when received, but probably be a few weeks before I get it
does the wacom pen work with the TF-101? I am confused....
bdangol said:
does the wacom pen work with the TF-101? I am confused....
Click to expand...
Click to collapse
Its not anything that will work like a wacom tablet + their stylus. This is just a regular capacitive stylus with the nub at the end of it, it just so happens that wacom makes it. Theres no interactivity between the stylus and the device other than the contact of the nib. So yea, it will work fine with the TF101, as will all capactive styli on the market today.
Sent from my Transformer TF101 using Tapatalk
tonyz3 said:
I am interested to hear how this one works out. I am currently using a targus which works great for me. but want a little more precision. Please update this when you get it....
Click to expand...
Click to collapse
It takes a little getting used to to hold it properly and to put the right pressure to get that disc centered, but once you do, the lines start at or very close to the dot, depending on whether i am holding it right. It takes a bit of getting used to, and seems more suitable for drawing and sketching. This is because if you're doing quick swipes i.e. quickly jotting down notes you might not get the disc centered before the tablet registers the touch, causing a fairly inaccurate input.
Sent from my Transformer TF101 using Tapatalk
lacrossev said:
It takes a little getting used to to hold it properly and to put the right pressure to get that disc centered, but once you do, the lines start at or very close to the dot, depending on whether i am holding it right. It takes a bit of getting used to, and seems more suitable for drawing and sketching. This is because if you're doing quick swipes i.e. quickly jotting down notes you might not get the disc centered before the tablet registers the touch, causing a fairly inaccurate input.
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
That doesn't sound too promising. I'm expecting mine to be delivered on Monday. Was going to use it for handwrite note taking
I ordered the DAGI too.
I'll also provide feedback once I receive it.
mias1 said:
That doesn't sound too promising. I'm expecting mine to be delivered on Monday. Was going to use it for handwrite note taking
Click to expand...
Click to collapse
Well the way I see it when u are handwriting your movements should just follow your first stroke. I tried writing quickly and found the dot to be useless because I'm writing so fast I'm just going by muscle memory instead of trying to aim it
Sent from my Transformer TF101 using Tapatalk
I really cant wait to hear what you guys think of the stylus.
Acually, it all depends on how well the transformer can be used to handwrite/inking for me if im going to buy it or not. =)
Discusbass said:
I really cant wait to hear what you guys think of the stylus.
Acually, it all depends on how well the transformer can be used to handwrite/inking for me if im going to buy it or not. =)
Click to expand...
Click to collapse
I have received mine today and can give a little feedback on how I am finding the stylus in use.
The stylus itself is really nice to hold in the hand, its weight is just right and it actually feels like you are holding a good quality pen. I expected it to be a little longer, more like the size of a standard size ball point pen however it is just a little bit shorter than this. Having said this, because of the way the weight is distributed on the stylus, it does not feel uncomfortable in the hand and feels very natural.
The end uses a small rubbery nib similar to others available however is considerably smaller when compared to the Boxwave stylus which I also use. This allows for more precision when writing and placement on the tablet.
To test handwriting, I used Tabnotes which is available on the market as a trial. My findings are that the stylus can definitely be used for handwriting and produces very acceptable results, I can confidently say that the writing produced from it resembled my true handwriting (Which is not very tidy by the way but is unique to me).
There is a slight screen sensitivity issue which I think is related to the transformer and not the pen. When you place dots on top of the letter i or strike through letters like t, you need to apply a bit more pressure (not excessive) or it may not register on the tablet.
I used a similar test on my HTC desire HD (DHD) and this is where the quality of the stylus was really highlighted. On the DHD, straight away I noticed that the screen was more responsive, the stylus seemed to glide effortlessly on it's screen with minimal pressure being applied and the results were near enough 100%. I used writepad to test on the DHD which converts your handwriting into typed text and my handwriting was recognised instantly.
Hopefully the upgrade to the honeycomb software will address the sensitivity issue on the transformer which if it does will make the Transformer an ideal platform for handwritten notes. Having said this, in its current form it is still very usable, all it means is that you have to use slightly more pressure on the transformer. I am also assuming that this will work even better on the Ipad2 because the screen sensitivity is no doubt better on it.
I hope this has been helpful, any queries about the stylus, let me know and I will try to help before you take the plunge and buy it.
Edit: I have since writing this, used it on my wifes Ipad2 and as I thought it gave very similar results as the DHD where the results were equal i.e. almost 100% accuracy.
I have also added some pics where I have compared the size of the Boxwave stylus against the Bamboo stylus and another pic showing the size difference of the nibs on each.
HasC said:
I have received mine today and can give a little feedback on how I am finding the stylus in use.
The stylus itself is really nice to hold in the hand, its weight is just right and it actually feels like you are holding a good quality pen. I expected it to be a little longer, more like the size of a standard size ball point pen however it is just a little bit shorter than this. Having said this, because of the way the weight is distributed on the stylus, it does not feel uncomfortable in the hand and feels very natural.
The end uses a small rubbery nib similar to others available however is considerably smaller when compared to the Boxwave stylus which I also use. This allows for more precision when writing and placement on the tablet.
To test handwriting, I used Tabnotes which is available on the market as a trial. My findings are that the stylus can definitely be used for handwriting and produces very acceptable results, I can confidently say that the writing produced from it resembled my true handwriting (Which is not very tidy by the way but is unique to me).
There is a slight screen sensitivity issue which I think is related to the transformer and not the pen. When you place dots on top of the letter i or strike through letters like t, you need to apply a bit more pressure (not excessive) or it may not register on the tablet.
I used a similar test on my HTC desire HD (DHD) and this is where the quality of the stylus was really highlighted. On the DHD, straight away I noticed that the screen was more responsive, the stylus seemed to glide effortlessly on it's screen with minimal pressure being applied and the results were near enough 100%. I used writepad to test on the DHD which converts your handwriting into typed text and my handwriting was recognised instantly.
Hopefully the upgrade to the honeycomb software will address the sensitivity issue on the transformer which if it does will make the Transformer an ideal platform for handwritten notes. Having said this, in its current form it is still very usable, all it means is that you have to use slightly more pressure on the transformer. I am also assuming that this will work even better on the Ipad2 because the screen sensitivity is no doubt better on it.
I hope this has been helpful, any queries about the stylus, let me know and I will try to help before you take the plunge and buy it.
Edit: I have since writing this, used it on my wifes Ipad2 and as I thought it gave very similar results as the DHD where the results were equal i.e. almost 100% accuracy.
I have also added some pics where I have compared the size of the Boxwave stylus against the Bamboo stylus and another pic showing the size difference of the nibs on each.
Click to expand...
Click to collapse
first of all thanks for the review on the stylus but, please, can you show some video or picture on this handwriting?
Thanks
danielcmacedo said:
first of all thanks for the review on the stylus but, please, can you show some video or picture on this handwriting?
Thanks
Click to expand...
Click to collapse
Sample added to my orginal post to show sample of note using my handwriting and a new note taking app which is soon to be released called "Tabnotes", at the moment a trial is available and the output quality has been reduced until the software is relesed by the developer who is busy finalising the software.
Ps sorry about my bad handwriting, been typing now for years and it has somewhat gone down hill ever since...
HasC said:
Sample added to my orginal post to show sample of note using my handwriting and a new note taking app which is soon to be released called "Tabnotes", at the moment a trial is available and the output quality has been reduced until the software is relesed by the developer who is busy finalising the software.
Ps sorry about my bad handwriting, been typing now for years and it has somewhat gone down hill ever since...
Click to expand...
Click to collapse
That looks awesome, im going to use it for marking up pdf drawings in the field. If i can keep somewhat a straightish line its a winner.
@ Delecron:
You can draw lines using Repligo reader or EZpdf which also allows you to draw in freehand if necessary.
HasC said:
Sample added to my orginal post to show sample of note using my handwriting and a new note taking app which is soon to be released called "Tabnotes", at the moment a trial is available and the output quality has been reduced until the software is relesed by the developer who is busy finalising the software.
Ps sorry about my bad handwriting, been typing now for years and it has somewhat gone down hill ever since...
Click to expand...
Click to collapse
Looks good- I also recently been using Tabnotes with a Targus which works great. I LOVE Tabnotes- it definitely has some great potential. Any idea when the full version will be released. I am sick of looking at the Trial version smack in the middle of the papers..
tonyz3 said:
Looks good- I also recently been using Tabnotes with a Targus which works great. I LOVE Tabnotes- it definitely has some great potential. Any idea when the full version will be released. I am sick of looking at the Trial version smack in the middle of the papers..
Click to expand...
Click to collapse
Had an email from the developer a couple of days ago where he apologised for not getting back to an email that I had sent him when he first put the software on the market where I requested from him a few changes such as having the undo and other tools at the top instead of having to select them via the menu option. He has done this and made a few other changes that enhance the software e.g. the little arrows on the bottom corner on the right to position the writing area etc.
Hopefully he should be releasing the full version fairly soon because he also advised that the reason for late response to emails was because he is hard at work improving the software before release which in his estimation is a couple of weeks.
I am checking for software updates daily for Tabnotes as I too can see the potential of this program and it is definitely my first choice for producing hand written notes on my tablet.
Too costly, even though the quality is there I just can't pay that much. Probably going to buy a few of these.
My pen is so far off I can hardly use it. I tried the LCD calibration pen test, but even that's hard to complete because I have to draw beside the boxes, and I am unable to draw near the bottom of the screen at all ..
Did you change your LCD density? Maybe the unit went bad on you. Go to the ATT store and have them look at it.
Idk if this helps but one thing that helped me was when i read that the Spen is setup to work best at a 45 degree angle. I used to use it more at a 90 and the calibration was way off.
Sent from my SAMSUNG-SGH-I717 using XDA
Try *#0*# && s pen test that's the best i got! Lol
Sent from my SAMSUNG-SGH-I717 using XDA
I haven't done anything with the density .. and I've done the pen test several times. If anything, it makes it worse. I can hardly complete the pen test because my pen barely touches the boxes before it physically goes off the bottom of the screen.
it's off by about half a centimeter.. don't really notice until I'm trying to sketch in Sketchbook, which is basically impossible. Maybe I should try a wacom pen and see if that's any better
I just used a straight edge to draw down the very center of the boxes in the pen test.. this is what I got. (and I've tried drawing to the edges several times to auto calibrate it, doesn't seem to help)
Main Frame said:
I just used a straight edge to draw down the very center of the boxes in the pen test.. this is what I got. (and I've tried drawing to the edges several times to auto calibrate it, doesn't seem to help)
Click to expand...
Click to collapse
I am going to Home depot today and get some aluminum Tape and try this.
Possible Fix Video for S-Pen
That tape is pricy. Hope you can find a small roll. I wonder how the guy in the vid figured that out. Amazing. Hope it works for you.
Main Frame said:
I just used a straight edge to draw down the very center of the boxes in the pen test.. this is what I got. (and I've tried drawing to the edges several times to auto calibrate it, doesn't seem to help)
Click to expand...
Click to collapse
When i did ot i just drew in the center of the boxes until all of them are green
&&does the tape still fit in the s pen holder thingy on the phone?
(excuse my poor vocabulary>.<)
Sent from my SAMSUNG-SGH-I717 using XDA
dcemtp1 said:
When i did ot i just drew in the center of the boxes until all of them are green
&&does the tape still fit in the s pen holder thingy on the phone?
(excuse my poor vocabulary>.<)
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
I think you're missing my point. If I draw in the center of the boxes, the line appears outside the boxes, and they do not turn green. I can draw to the side of the boxes where the line appears in the boxes and they turn green, but this does nothing to help my issue. There is still about a half centimeter difference between where I place the tip of the pen on the screen and where the line appears.
I would like the line on the screen appear directly underneath the tip of the pen, not off to the side.
Also, from that video I don't see anything about the tape addressing my issue. As far as I can tell it just reduces the sensitivity and prevents the pen from working at extreme angles. My issue is with the calibration of the pen..
kimtyson said:
That tape is pricy. Hope you can find a small roll. I wonder how the guy in the vid figured that out. Amazing. Hope it works for you.
Click to expand...
Click to collapse
It cost me $7 for a roll at HD. I'll let you know after I finish the honey do list for today.
Hi all,
Does anyone find it easy to attach the charging cradle?
I find that it never clicks in first try and I end up pushing in numerous spots trying to get it to click in.
When I press in the middle of the screen it takes so much force I'm scared I might break the screen.
When I push on the left/right sides or top/bottom of the bezel, it doesn't seem to be effective. After. Much messing around it eventually clicks in.
I'm wondering if anyone has worked out a fool proof method for quick attachment.
richlum said:
Hi all,
Does anyone find it easy to attach the charging cradle?
I find that it never clicks in first try and I end up pushing in numerous spots trying to get it to click in.
When I press in the middle of the screen it takes so much force I'm scared I might break the screen.
When I push on the left/right sides or top/bottom of the bezel, it doesn't seem to be effective. After. Much messing around it eventually clicks in.
I'm wondering if anyone has worked out a fool proof method for quick attachment.
Click to expand...
Click to collapse
It's the strap in the way, after a while of wearing the watch and flexing the band where it holds the watch by the notches for the cradle, I have found that makes it slightly easier to attach it.
the first time i tried to attach the cradle i needed to call samsung because it says in the quick start instructions to "gently" attach the cradle. F that, it took a good push to click int place. the best way i have found is to align the charging pins with the watch, hold the watch in place and wait for the display to light up. that lets you know it is in place. then PUSH until it clicks into place. also, i wouldn't push on the screen. rather place your thumbs on each side of the display when you push.
richlum said:
Hi all,
Does anyone find it easy to attach the charging cradle?
I find that it never clicks in first try and I end up pushing in numerous spots trying to get it to click in.
When I press in the middle of the screen it takes so much force I'm scared I might break the screen.
When I push on the left/right sides or top/bottom of the bezel, it doesn't seem to be effective. After. Much messing around it eventually clicks in.
I'm wondering if anyone has worked out a fool proof method for quick attachment.
Click to expand...
Click to collapse
--
It's not easy to attach, it always feels like it's not quite in the right place and it takes a lot of force to click it in and a lot to pull it off too.
I find that pressing on the silver edges with both thumbs rather than the screen works for me. Pulling it off using the tab with as much pressure as it needs.
I worried about the first couple of times but not now.
--
Sent from my SM-T705 using Tapatalk
apprentice said:
--
It's not easy to attach, it always feels like it's not quite in the right place and it takes a lot of force to click it in and a lot to pull it off too.
I find that pressing on the silver edges with both thumbs rather than the screen works for me. Pulling it off using the tab with as much pressure as it needs.
I worried about the first couple of times but not now.
--
Sent from my SM-T705 using Tapatalk
Click to expand...
Click to collapse
I had the same problem. But after looking at the charger there is small notch in the middle of the top.. I try to align that with the small notch that it supposed to fit into. If you accomplish that, the charger will quicly snap into place without much effort.
Removing it does take a reasonable tug on the tab.
Yup. There is a trick to finesse it into place! Same with the Gear Fit and with the Gear Live. I put it in my left hand and cup it, line everything up and cup my other hand over the top and press gently together that way. As it is used it gets easier.
When I remove it I put my right index finger under the top strap, cup my left hand under the watch with my left palm against the left edge, and use my right thumb to push down on the tab.
I've feel the same way you do and feel like I'm going to break it. Been a week and still struggle every time I charge it.
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app
Easiest way is as said above...
There is a notch on one side of the cradle. Line that up with the hole on the back of the watch and then press lightly on the lower edge of the cradle and it will click into place easier than any other method.
I'll be glad when more chargers are available
I had no problem attaching the cradle actually, but what I find hard is getting the cradle DETACHED! There is a lever at the side you push, but it is quite stiff and if you are not careful either the watch or cradle will go flying across the room. I tend to support the side of the watch on the bed sheet while pushing the lever on the other side....but it certainly isn't as easy as I think it should be.
This is becoming my favourite thread lol
It's fun just imagining people reading this and trying out these methods.
It really should be a simple operation to attach and detach a charger though.
Sent from my SM-N910F using Tapatalk
apprentice said:
This is becoming my favourite thread lol
It's fun just imagining people reading this and trying out these methods.
It really should be a simple operation to attach and detach a charger though.
Sent from my SM-N910F using Tapatalk
Click to expand...
Click to collapse
Agreed, Honestly this is the most annoying feature of this watch.
It should be but is not for me.
It's a lot worse than with gear and gear 2. I cannot observe how nice is the qi charger from moto 360 and So Stupid Is what we got for gear s. Anyway..gear s is at least 2 generation ahead of android wear, even the gear 2 is but this is a pain in the ass from samsung, a bad design. Maybe we will get right in time but now it painful.
I just bought a note 12.2 but I want a stylus pen with eraser functionality so that I can avoid manually toggling the eraser. I know that it works on Samsung apps, sketchbook and other big name software. However, Amazon's question and answer does not make it very clear if it works on smaller 3rd party apps like Lecture Notes.
Can someone test their stylus eraser and see if it works on Lecture Notes (free trial)?
Here is the stylus:
http://www.amazon.com/Galaxy-Genuin...d=1449214660&sr=8-1&keywords=stylus+note+12.2
Here is the specific app:
https://play.google.com/store/apps/details?id=com.acadoid.lecturenotestrial&hl=en
Yes, it does work on Lecture notes (full version). In settings you can enable button actions.
I don't have your stylus, but I tried with two different pens and both work very well (Lenovo ThinkPad Tablet Pen 4X80F22107 and Wacom Bamboo Smart CS-310)
zipsomic said:
Yes, it does work on Lecture notes (full version). In settings you can enable button actions.
I don't have your stylus, but I tried with two different pens and both work very well (Lenovo ThinkPad Tablet Pen 4X80F22107 and Wacom Bamboo Smart CS-310)
Click to expand...
Click to collapse
Thanks. I think the programmer needs to program it with the API and the feature is not system wide. I'm very happy about this.
btw: the eraser on the top of the pen will not work (when you flip the pen), at least not with my Lenovo pen
zipsomic said:
btw: the eraser on the top of the pen will not work (when you flip the pen), at least not with my Lenovo pen
Click to expand...
Click to collapse
So do you erase in lecture notes by clicking the stylus button on the side?
poetryrocksalot said:
So do you erase in lecture notes by clicking the stylus button on the side?
Click to expand...
Click to collapse
Yes, I think it's qicker anyway
This pen might work with squid.
Such a shame that one note is so crap on Android.
DarkManX4lf said:
This pen might work with squid.
Click to expand...
Click to collapse
I can confirm this. These pens work excellently with squid (Papyrus). If you additionally buy so-called premium features, you can also use a "true eraser" by pressing the pen button.
And btw: the Lenovo pen is much more pressure sensitive than the Wacom Bamboo.
zipsomic said:
I can confirm this. These pens work excellently with squid (Papyrus). If you additionally buy so-called premium features, you can also use a "true eraser" by pressing the pen button.
And btw: the Lenovo pen is much more pressure sensitive than the Wacom Bamboo.
Click to expand...
Click to collapse
There are no reviews on the Lenova pen, so I didn't buy it.
zipsomic said:
And btw: the Lenovo pen is much more pressure sensitive than the Wacom Bamboo.
Click to expand...
Click to collapse
You do realize pressure sensitivity is determined by the digitizer in the tablet, not the pen...
The NotePro (All versions) have a sensitivity of 1024 levels. The only part of the pens that matter in terms of sensitivity is what they support. (A pen that supports, say, 500 levels, will never offer 1024.)
All Wacom pens support at least 1024 levels.
The Lenovo pen also supports 1024 levels.
Both pens have the exact same sensitivity level on this device.
Obviously the Wacom pen is designed specifically for Note devices as both the pen and the sensors are made by Wacom, whereas the Lenovo is not. I can't say if that affects usability, as I haven't tried the Lenovo pen.
Mind you, I have the regular and carbon versions of the Bamboo Stylus Feel for Note. (There are two versions of both the regular and the Carbon Bamboo Feel, (For Note and for Microsoft) and a lot of people bought the wrong one.)
I've been a Wacom (Intuos and Cintiq) user for years, So yea, I'm a bit biased. :laugh: I stuck with the brand I know. (Wacom is the professional brand for digital artists, from amateurs to Hollywood).
ShadowLea said:
You do realize pressure sensitivity is determined by the digitizer in the tablet, not the pen...
Click to expand...
Click to collapse
Obviously you are an expert and your explanation makes sense to me.
But how would you explain, that lines drawn with the lenovo pen are partially thicker than the ones from Bamboo even in same app (Squid) with the same settings and with the same pressure?
zipsomic said:
Obviously you are an expert and your explanation makes sense to me.
But how would you explain, that lines drawn with the lenovo pen are partially thicker than the ones from Bamboo even in same app (Squid) with the same settings and with the same pressure?
Click to expand...
Click to collapse
Well, I'm not really an expert.:laugh: I've just got a bit of experience with wacom's tech, and an unhealthy habit of wanting to know how everything works. :laugh:
That's actually ridiculously simple once you realize it. There is a difference in the various nibs (the tips), which affect the result when drawing, as well as 'paper'resistance on the screen. I don't know precisely which nibs came with which pen, but they vary in size, material and effect. I think the Bamboo Smart came with two different types of tips, which can be swapped. (That's what that silly piece of metal that looks like a weird pincer is for.)
Also, the driver on the tab is configured for Wacom pens. As such, the result with a non-Wacom pen can be a little lacking in finesse. Then again, thicker isn't always an advantage when you're sketching, but for non-precise tasks a more 'solid' line might be more preferable.
got it
Thanks for useful information, ShadowLea
ShadowLea said:
I have the regular and carbon versions of the Bamboo Stylus Feel for Note. (There are two versions of both the regular and the Carbon Bamboo Feel, (For Note and for Microsoft) and a lot of people bought the wrong one.)
Click to expand...
Click to collapse
Could you tell me what is the exact model of Bamboo Carbon Feel you use, because I bought one that during writing at 45 degrees has an offset of about 1 ~ 2 mm.
Thanks, :good:
marcio.mg said:
Could you tell me what is the exact model of Bamboo Carbon Feel you use, because I bought one that during writing at 45 degrees has an offset of about 1 ~ 2 mm.
Thanks, :good:
Click to expand...
Click to collapse
I've got the CS-400. There is only one version of the Carbon, as far as I'm aware.
It did have an offset at the beginning, had to recalibrate it. Mind you, it will always have an offset when held at an angle. The sensors work in a straight line. 1mm is fairly normal at 45º. (Also, that way you can see what you're drawing.)
The guide as to how to do that is here: http://forum.xda-developers.com/showpost.php?p=54772260&postcount=18
(I'll quote it here)
ShadowLea said:
There's two ways to go about this. The 'Viking equivalent of try this first' and the 'If that doesn't work, let's try the more technical one.'
Firstly, try giving it a good solid whack on the edge of a table. As ridiculous as that sounds (and makes you look), this does usually have an effect. Often, the nib isn't properly inserted, or sits at just the wrong angle. Brute force tends to work.
If that doesn't help, it's time for the proper technical solution. This works on pretty much any magnetic stylus with a button, including the Spen.
Requirements:
- A small flat screwdriver
- A non-cluttered room (preferably without carpets)
- The pen
- The tablet
Step 1) Carefully use the small screwdriver to pop off the button. You should be able to insert it along the side in the middle and then slide it towards the back end (where the fastener isunder the button).
The thing jumps, so be careful! (Hence the clean, carpet free room. I had to use a vacuum cleaner to recover mine once..) If the screwdriver doesn't work, try a needle or a razor (mind your fingers!).
Step 2) With the lid off, you'll see two dials.
The one closest to the tip of the pen adjusts the sensitivity.
The one closest to the cap adjusts the offset. This is the one we'll need to fix this issue. (Might as well tweak both whilst you're at it)
Carefully make tiny adjustments (and I mean really tiny) to these dials. Test it on the tab every time, you don't need to re-attach the button to test it. They go both ways, so play with it 'till you're satisfied with the result. (On my previous one I had to turn it a whole 85º, on my new one only 5º.)
Step 3) If you're happy with the result, click the button back on. It only fits one way, and needs to be inserted very much like a battery: one side first. (The side pointing towards the cap)
That's it
Click to expand...
Click to collapse
I have that samsung spen with eraser and use it every day with LectureNotes. The eraser and side button both work beautifully with LectureNotes. Actually, LN allows you to customize the behavior of the eraser and the side button independently.
The stock s-pen has pretty decent eraser functionality via the button on the side in some apps like Squid. Squid really is fantastic -- I've used it for class notes for more than a year and a half now.
I have this stylus and the eraser works on Squid and LectureNotes
I did test the s6 at a retailer and I noticed that the Samsung Notes App did not recognize my handwriting in landscape mode at a specific place. It was when I did get closer with my palm to the edge (with power and volume button on the upper side).
At the middle kind of a little bit to the right there seems to be a blind spot where writing/drawing is not recognized in first place. Only after second or third attempt and then it seems like the recognition of the pressure is half off.
Don't know if the bright light from above or a already often used spen causes this.
Can any owner confirm?
Picture is attached (left space is empty because I did not encounter issues there)
LaCereb said:
I did test the s6 at a retailer and I noticed that the Samsung Notes App did not recognize my handwriting in landscape mode at a specific place. It was when I did get closer with my palm to the edge (with power and volume button on the upper side).
At the middle kind of a little bit to the right there seems to be a blind spot where writing/drawing is not recognized in first place. Only after second or third attempt and then it seems like the recognition of the pressure is half off.
Don't know if the bright light from above or a already often used spen causes this.
Can any owner confirm?
Picture is attached (left space is empty because I did not encounter issues there)
Click to expand...
Click to collapse
Looks just like mine in this post. https://forum.xda-developers.com/showpost.php?p=80372311&postcount=16
Was it in a case or something else with magnets?
TiTiB said:
Looks just like mine in this post. https://forum.xda-developers.com/showpost.php?p=80372311&postcount=16
Was it in a case or something else with magnets?
Click to expand...
Click to collapse
HAH.
Yes indeed it was on a stand with a magnet on top to hold the device. And that field where i could not draw would fit the size of that magnet..
Unbelivable that you have to keep such things in mind when you want to you a tablet with that price...
Does Apple have such problems with their ipad series? Im so much struggling in the decision if apple or samsung. Im a Android guy and would like to keep my Android world but i want a performant device which does not have childhood injuries like that....
LaCereb said:
HAH.
Yes indeed it was on a stand with a magnet on top to hold the device. And that field where i could not draw would fit the size of that magnet..
Unbelivable that you have to keep such things in mind when you want to you a tablet with that price...
Does Apple have such problems with their ipad series? Im so much struggling in the decision if apple or samsung. Im a Android guy and would like to keep my Android world but i want a performant device which does not have childhood injuries like that....
Click to expand...
Click to collapse
It isn't the tablet, but the case/holder.
I have two cases. One which the tab slips in to a holder—no probs there.
My other case holds the tab (very securely) with a magnet—therefore the dead spot. Love this case, except for the dead spot ceated by the stting magnet. This an awesome case in every other way, especially because there is nothing blocking the sides of the tablet, no edge swipe issues, et al.
So, I've just accepted that if I want to do any serious S-pen writing or drawing I have to either go case-less, or switch to the other one.
TiTiB said:
It isn't the tablet, but the case/holder.
I have two cases. One which the tab slips in to a holder—no probs there.
My other case holds the tab (very securely) with a magnet—therefore the dead spot. Love this case, except for the dead spot ceated by the stting magnet. This an awesome case in every other way, especially because there is nothing blocking the sides of the tablet, no edge swipe issues, et al.
So, I've just accepted that if I want to do any serious S-pen writing or drawing I have to either go case-less, or switch to the other one.
Click to expand...
Click to collapse
Could you link your second Case please
LaCereb said:
Could you link your second Case please
Click to expand...
Click to collapse
Just search my name in S6 forum. Both cases are linked—Amazon.