[Q] flashing boot image in fastboot - HTC Desire V

how to flash boot image using fastboot command prompt.... actually i did this while i unlocked my phone.... now i wish to flash baidu rom 4.0.4 by AKA_Noodle....

ramakrisna
What is difficulty?
You need adb and fastboot. If you don`t have it, download from here & unpack it in e.g. C:\Android.
Also download rom what you want, e.g. baidu rom 4.0.4 by AKA_Noodle. Open it via Winrar & take out boot.img, put it in C:\Android.
Don`t forget to copy rom to sdcard
Then open DOS Command Prompt
Code:
win + R > Type "CMD"
Connect Desire V to BB by USB cable & type in Command Prompt window
Code:
CD C:\Android
adb reboot bootloader (your device should reboot into fastboot mode)
fastboot flash boot boot.img
Reboot your Desire V into recovery mode & flash rom via CWMrecovery.
Of course you need a properly installed drivers.

Related

[Q] Error when installing new CWM recovery

So I was able to easily unlock the bootloader but when trying to install recovery I get the following: "error cannot load recovery.img" Any idea what I'm doing wrong? I have fastboot and recovery.img in same folder so I'm not sure what the problem is. Any help would be greatly appreciated as I'd really like to install Kens rom and restore my phone to my liking.
First not a major issue your just not typing something right or not placed right
Lets do this !
2nd Please Remove install_recovery.sh located in your /system/etc/ ,so that the recovery will not be overwrite to stock one.
you dont HAVE to it will still work just wont have the stock recovery.
1st make sure the moto-fastboot or fastboot (they both work i have tested )file is in your c:\
you have to cd the drive first so make sure its in c:\ the commands on the guide for cwm needs
to be updated this will help you out.FYI make sure all the files are in one folder not the root drive
so name a folder (whatever) then cd that folder from cmd.
Dont use " " just showing you commands
Then go to cmd
"cd c:\moto-fastboot" or fastboot
click enter
then type "moto-fastboot flash recovery recovery-en-goapk-0630-1029.img" or fastboot
click enter
Should say writing\sending
Once your done and it completes
type moto-fastboot reboot or fastboot
enter
P.S. Depending on if your using fastboot or moto-fast boot
commands would be
"fastboot flash recovery recovery-en-goapk-0630-1029.img" Fastboot
"moto-fastboot flash recovery recovery-en-goapk-0630-1029.img" moto-fastboot
And if you were wondering
Moto-fastboot is for bigger files
fastboot is for smaller files
They both work because the recovery is in
the middle in size for both fastboots.

[Q] How to reboot into recovery

hi i want to know how to reboot into recovery ive rooted my phone and i want to install doomlord's kernel but i dont know how
is there anyone that can help me?
and also it says that i need to download the update.zip but the file is S-DooMKernel-v03a is it the same? do i need to extract?
and also if i install a rom can i still update to ICS once its out?
edit: nevermind i just flash the advanced stock recovery
To install DoomLord Kernel, you need FastBoot Mode, and Prompt Comand and execute the code.
FastBoot Mode = read this --> http://forum.xda-developers.com/showthread.php?t=1526866
DoomLord Kernel = http://forum.xda-developers.com/showthread.php?t=1557452
[ how to install my kernel ] (v01 or LOWER) {OLD}
download the kernel.elf & wifi modules update.zip
save the kernel.elf in the folder with fastboot binaries (fastboot.exe files)
save the wifi modules update.zip to sdcard (on phone)
power down device
start device in fastboot mode
use the following command to flash the kernel.elf
Code:
fastboot flash boot kernel.elf
OR
Code:
fastboot -i 0x0fce flash boot kernel.elf
reboot phone and enter recovery
flash the wifi modules update.zip for my kernel
reboot phone and enjoy the kernel !
PS: To Prompt Command, press shift in folder with kernel.elf and fastboot.exe, and right click, "open command here."

[Q] Evo 4g lte will not boot after Rom install

Hopefully someone can help. I have a Sprint Evo 4g lte and I rooted and re rooted and every time I flash a rom the phone will not boot. Any help would be apprecaited.
Flashing a kernel in fastboot
ADB Tools
1. Download and extract folder
2. Open rom.zip and extract the bootloader.img
3. Place the file in the adb folder
4. Hold shift and right click then select open command window here
5. Connect phone to pc in fastboot
6. In command prompt type "fastboot flash boot boot.img" without quotations
7. Reboot phone

Help flashing Kernel for CM10

Hi guys please help.
Dont know if I posted it in the right placed.
I cant post it in the relevant thread since it is a dev thread and i'm a noob
So this is my first android so i'm basically super noob (my technical record was to Jailbreak an iPhone)
My error seem pretty simple but I could not figure it out.
I'm trying to flash the CM10 ROM according to this:
http://forum.xda-developers.com/showthread.php?t=2027304
What i have managed to do:
Unlock bootloader.
root with RootBoot V5.
install SU and flashed TWRP recovery for Intl version with the amazing Hasson2000 all-in-one tool.
Where I got stuck:
now i downloaded the CM rom zip file and the its specific kernel.
changed the kernel name to: boot.img
placed the file in the kernel folder (of the tool).
hit the flash kernerl (marked the 'with this command').
the CMD window opened, and showed this error:
error: cannot load 'Kernels/boot.img'
picture - http://sdrv.ms/YtPHoU
triple checked the file name and the right directory
I would appreciate any help!
Thanks
My device:
HTC One X+ international unbranded
1.14.401.16
I think your making things too complicated using this kernel flasher software.
Just download and install the Android SDK. Once installed find the platform-tools folder, copy your kernel .img to that folder, connect your phone in fastboot mode. Then hold shift and right click, choose open command window from the contex menu. Then just type into the prompt "fastboot flash boot boot.img" (or the name of the .img).
Done
Sent from my HTC One X+ using Tapatalk 2
ummmm why are you adb pushing?? the command is:
just put it in the folder where ever fastboot and adb is
fastboot flash boot boot.img
Lloir said:
ummmm why are you adb pushing?? the command is:
just put it in the folder where ever fastboot and adb is
fastboot flash boot boot.img
Click to expand...
Click to collapse
AndroHero said:
I think your making things too complicated using this kernel flasher software.
Just download and install the Android SDK. Once installed find the platform-tools folder, copy your kernel .img to that folder, connect your phone in fastboot mode. Then hold shift and right click, choose open command window from the contex menu. Then just type into the prompt "fastboot flash boot boot.img" (or the name of the .img).
Done
Sent from my HTC One X+ using Tapatalk 2
Click to expand...
Click to collapse
Thank you guys for helping me.
I tried both methods and recieved the same error in both of them in CMD:
error: cannot load boot.img
Lloyr method:
4 files in fastboot folder:
adb
AdbWinApi.dll
fastboot
boot.img
entered fastboot from device ----> plug in to pc (debugging is on by default) ----> run CMD from this folder----> writing command "fastboot flash boot boot.img" -----> error message
AndroHero method:
download the Android SDK (zip file named adt-bundle-windows-x86) and exract it to desktop.
in the folder adt-bundle-windows-x86, i went to "sdk" and then "platform tools".
copied the boot.img file to "platform tool" folder and ran the CMD from this folder.
typed the command "fastboot flash boot boot.img" and boom ----> error: cannot load boot.img
thanks again
>.< you NEED to be in bootloader
type in adb reboot bootloader and make sure you are in fastboot usb (select it if it's not already done for you)
then
fastboot flash boot boot.img
Lloir said:
>.< you NEED to be in bootloader
type in adb reboot bootloader and make sure you are in fastboot usb (select it if it's not already done for you)
then
fastboot flash boot boot.img
Click to expand...
Click to collapse
Sorry if I didn't mention that.
i was on fastboot USB.
showed fastboot USB on a red backround.
I tried once again with both methods and i recieved another error message in the SDK methos:
error: cannot load 'boot.img': Unknown error
I attached file with step by step screen shot for the whole process (both methods).
Just thought...did you rename it boot.img? If so and file extensions are hidden then it will be boot.IMG.IMG so remove .IMG and it should work fine
Sent from my HTC One X+ using xda app-developers app
Make sure you installed HTC Sync (htc site) and the drivers will come with it. (you can later remove sync, drivers will stay)
Then enter fastboot trough vol down + power > choose fastboot ... plug your phone to PC and wait sec for driver install.
Make sure u see Fastboot USB in fastboot
Go prompt admin mode and go to your c:/fastboot map (put boot.img in there)
And type
Code:
fastboot flash boot boot.img
After that install recovery and rom and boot.
Lloir said:
Just thought...did you rename it boot.img? If so and file extensions are hidden then it will be boot.IMG.IMG so remove .IMG and it should work fine
Sent from my HTC One X+ using xda app-developers app
Click to expand...
Click to collapse
WORKED!!!!!!!
Lloir YOU R the best!!
flashed the kernel
then followed instruction how to backup and flash from the TWRP
running joyfully your CM10 ROM right now.
It's Amazing!
Thank you thank you thank you!!

Question [Stock ROM][Without PartitionBackupper] Flahing DN_2101.A_15 manually

I have four files-
1- Stock ROM file
2- Vbmeta
3- boot.emmc.win
What is the correct order of flashing these files and what ADB and fastboot are required to do so?
Follow these steps to sideload adb
1.Boot into recovery
2.Tap on upgrade from USB
3.Go to your computer and open a command window
"Click Shift and Right click simultaneously"
4. Type the following command
Adb sideload file name.zip
5.Wait for the process to complete
6.Reboot your device

Categories

Resources