hi i want to know how to reboot into recovery ive rooted my phone and i want to install doomlord's kernel but i dont know how
is there anyone that can help me?
and also it says that i need to download the update.zip but the file is S-DooMKernel-v03a is it the same? do i need to extract?
and also if i install a rom can i still update to ICS once its out?
edit: nevermind i just flash the advanced stock recovery
To install DoomLord Kernel, you need FastBoot Mode, and Prompt Comand and execute the code.
FastBoot Mode = read this --> http://forum.xda-developers.com/showthread.php?t=1526866
DoomLord Kernel = http://forum.xda-developers.com/showthread.php?t=1557452
[ how to install my kernel ] (v01 or LOWER) {OLD}
download the kernel.elf & wifi modules update.zip
save the kernel.elf in the folder with fastboot binaries (fastboot.exe files)
save the wifi modules update.zip to sdcard (on phone)
power down device
start device in fastboot mode
use the following command to flash the kernel.elf
Code:
fastboot flash boot kernel.elf
OR
Code:
fastboot -i 0x0fce flash boot kernel.elf
reboot phone and enter recovery
flash the wifi modules update.zip for my kernel
reboot phone and enjoy the kernel !
PS: To Prompt Command, press shift in folder with kernel.elf and fastboot.exe, and right click, "open command here."
Related
So I was able to easily unlock the bootloader but when trying to install recovery I get the following: "error cannot load recovery.img" Any idea what I'm doing wrong? I have fastboot and recovery.img in same folder so I'm not sure what the problem is. Any help would be greatly appreciated as I'd really like to install Kens rom and restore my phone to my liking.
First not a major issue your just not typing something right or not placed right
Lets do this !
2nd Please Remove install_recovery.sh located in your /system/etc/ ,so that the recovery will not be overwrite to stock one.
you dont HAVE to it will still work just wont have the stock recovery.
1st make sure the moto-fastboot or fastboot (they both work i have tested )file is in your c:\
you have to cd the drive first so make sure its in c:\ the commands on the guide for cwm needs
to be updated this will help you out.FYI make sure all the files are in one folder not the root drive
so name a folder (whatever) then cd that folder from cmd.
Dont use " " just showing you commands
Then go to cmd
"cd c:\moto-fastboot" or fastboot
click enter
then type "moto-fastboot flash recovery recovery-en-goapk-0630-1029.img" or fastboot
click enter
Should say writing\sending
Once your done and it completes
type moto-fastboot reboot or fastboot
enter
P.S. Depending on if your using fastboot or moto-fast boot
commands would be
"fastboot flash recovery recovery-en-goapk-0630-1029.img" Fastboot
"moto-fastboot flash recovery recovery-en-goapk-0630-1029.img" moto-fastboot
And if you were wondering
Moto-fastboot is for bigger files
fastboot is for smaller files
They both work because the recovery is in
the middle in size for both fastboots.
Hi, My phone is EVO 3D CDMA, unlock by HTC method, Hboot1.5 still S-ON
When boot into hboot, no go into recovery menu, can flash recovery.img by fastboot tool, but can boot into recovery,I use adb reboot recovery.
muziling said:
Hi, My phone is EVO 3D CDMA, unlock by HTC method, Hboot1.5 still S-ON
When boot into hboot, no go into recovery menu, can flash recovery.img by fastboot tool, but can boot into recovery,I use adb reboot recovery.
Click to expand...
Click to collapse
First download a custom recovery like CWM, TWRP or 4ext.
It should be .img file. Put it in the folder in which you have fastboot.exe.
Boot into hboot. Open command prompt and instead of adb reboot recovery , use "fastboot flash recovery recovery.img" (file name should be recovery.img or change command according to the file name). Then type fastboot boot recovery.img. Recovery should boot now.
To make things easier just download free version from here (this will flash 4ext recovery) ----> http://4ext.net/
and install the latest or stable release. then adb reboot recovery will work.
mnomaanw said:
First download a custom recovery like CWM, TWRP or 4ext.
It should be .img file. Put it in the folder in which you have fastboot.exe.
Boot into hboot. Open command prompt and instead of adb reboot recovery , use "fastboot flash recovery recovery.img" (file name should be recovery.img or change command according to the file name). Then type fastboot boot recovery.img. Recovery should boot now.
To make things easier just download free version from here (this will flash 4ext recovery) ----> http://4ext.net/
and install the latest or stable release. then adb reboot recovery will work.
Click to expand...
Click to collapse
I can use "fastboot boot recovery.img" to boot any recovery.img.
But can not boot into the recovery which flash by "fastboot flash recovery recovery.img", when in android ,use command "adb reboot recovery", can not boot into recovery, and HBOOT still no recovery menu.
Before you started this process did you make sure to enable usb debugging from within your rom ?? Also did you make sure to uncheck fastboot in the power settings as well ??
#Root-Hack_Mod*Always\
laie1472 said:
Before you started this process did you make sure to enable usb debugging from within your rom ?? Also did you make sure to uncheck fastboot in the power settings as well ??
#Root-Hack_Mod*Always\
Click to expand...
Click to collapse
Yes , I did disable fastboot in power setting, "adb reboot recovery", phone reboot an go into android, not recovery.
fastboot boot recovery.img to recovery:
/ # flash_image recovery /sdcard/recovery.img
flash_image recovery /sdcard/recovery.img
error scanning partitions: No such file or directory
muziling said:
Yes , I did disable fastboot in power setting, "adb reboot recovery", phone reboot an go into android, not recovery.
fastboot boot recovery.img to recovery:
/ # flash_image recovery /sdcard/recovery.img
flash_image recovery /sdcard/recovery.img
error scanning partitions: No such file or directory
Click to expand...
Click to collapse
first off what operating system are you using? windows,linuxsietug would be a help and second... is that the list of commands youre enterting in order?
wloftus said:
first off what operating system are you using? windows,linuxsietug would be a help and second... is that the list of commands youre enterting in order?
Click to expand...
Click to collapse
fastboot boot c:\recovery.img
adb push c:\recovery.img /sdcard/recovery.img
adb shell
flash_image recovery /sdcard/recovery.img
Then, error output : error scanning partitions: No such file or directory
My OS is WIN7
Did you place the img into the tools folder ?? And whats the name of the recovery img ??
#Root-Hack_Mod*Always\
laie1472 said:
Did you place the img into the tools folder ?? And whats the name of the recovery img ??
#Root-Hack_Mod*Always\
Click to expand...
Click to collapse
No, recovery is recoveryTWRP110.img
You need to place a copy of the img into your adb tools folder then run the commands
#Root-Hack_Mod*Always\
Hi guys please help.
Dont know if I posted it in the right placed.
I cant post it in the relevant thread since it is a dev thread and i'm a noob
So this is my first android so i'm basically super noob (my technical record was to Jailbreak an iPhone)
My error seem pretty simple but I could not figure it out.
I'm trying to flash the CM10 ROM according to this:
http://forum.xda-developers.com/showthread.php?t=2027304
What i have managed to do:
Unlock bootloader.
root with RootBoot V5.
install SU and flashed TWRP recovery for Intl version with the amazing Hasson2000 all-in-one tool.
Where I got stuck:
now i downloaded the CM rom zip file and the its specific kernel.
changed the kernel name to: boot.img
placed the file in the kernel folder (of the tool).
hit the flash kernerl (marked the 'with this command').
the CMD window opened, and showed this error:
error: cannot load 'Kernels/boot.img'
picture - http://sdrv.ms/YtPHoU
triple checked the file name and the right directory
I would appreciate any help!
Thanks
My device:
HTC One X+ international unbranded
1.14.401.16
I think your making things too complicated using this kernel flasher software.
Just download and install the Android SDK. Once installed find the platform-tools folder, copy your kernel .img to that folder, connect your phone in fastboot mode. Then hold shift and right click, choose open command window from the contex menu. Then just type into the prompt "fastboot flash boot boot.img" (or the name of the .img).
Done
Sent from my HTC One X+ using Tapatalk 2
ummmm why are you adb pushing?? the command is:
just put it in the folder where ever fastboot and adb is
fastboot flash boot boot.img
Lloir said:
ummmm why are you adb pushing?? the command is:
just put it in the folder where ever fastboot and adb is
fastboot flash boot boot.img
Click to expand...
Click to collapse
AndroHero said:
I think your making things too complicated using this kernel flasher software.
Just download and install the Android SDK. Once installed find the platform-tools folder, copy your kernel .img to that folder, connect your phone in fastboot mode. Then hold shift and right click, choose open command window from the contex menu. Then just type into the prompt "fastboot flash boot boot.img" (or the name of the .img).
Done
Sent from my HTC One X+ using Tapatalk 2
Click to expand...
Click to collapse
Thank you guys for helping me.
I tried both methods and recieved the same error in both of them in CMD:
error: cannot load boot.img
Lloyr method:
4 files in fastboot folder:
adb
AdbWinApi.dll
fastboot
boot.img
entered fastboot from device ----> plug in to pc (debugging is on by default) ----> run CMD from this folder----> writing command "fastboot flash boot boot.img" -----> error message
AndroHero method:
download the Android SDK (zip file named adt-bundle-windows-x86) and exract it to desktop.
in the folder adt-bundle-windows-x86, i went to "sdk" and then "platform tools".
copied the boot.img file to "platform tool" folder and ran the CMD from this folder.
typed the command "fastboot flash boot boot.img" and boom ----> error: cannot load boot.img
thanks again
>.< you NEED to be in bootloader
type in adb reboot bootloader and make sure you are in fastboot usb (select it if it's not already done for you)
then
fastboot flash boot boot.img
Lloir said:
>.< you NEED to be in bootloader
type in adb reboot bootloader and make sure you are in fastboot usb (select it if it's not already done for you)
then
fastboot flash boot boot.img
Click to expand...
Click to collapse
Sorry if I didn't mention that.
i was on fastboot USB.
showed fastboot USB on a red backround.
I tried once again with both methods and i recieved another error message in the SDK methos:
error: cannot load 'boot.img': Unknown error
I attached file with step by step screen shot for the whole process (both methods).
Just thought...did you rename it boot.img? If so and file extensions are hidden then it will be boot.IMG.IMG so remove .IMG and it should work fine
Sent from my HTC One X+ using xda app-developers app
Make sure you installed HTC Sync (htc site) and the drivers will come with it. (you can later remove sync, drivers will stay)
Then enter fastboot trough vol down + power > choose fastboot ... plug your phone to PC and wait sec for driver install.
Make sure u see Fastboot USB in fastboot
Go prompt admin mode and go to your c:/fastboot map (put boot.img in there)
And type
Code:
fastboot flash boot boot.img
After that install recovery and rom and boot.
Lloir said:
Just thought...did you rename it boot.img? If so and file extensions are hidden then it will be boot.IMG.IMG so remove .IMG and it should work fine
Sent from my HTC One X+ using xda app-developers app
Click to expand...
Click to collapse
WORKED!!!!!!!
Lloir YOU R the best!!
flashed the kernel
then followed instruction how to backup and flash from the TWRP
running joyfully your CM10 ROM right now.
It's Amazing!
Thank you thank you thank you!!
how to flash boot image using fastboot command prompt.... actually i did this while i unlocked my phone.... now i wish to flash baidu rom 4.0.4 by AKA_Noodle....
ramakrisna
What is difficulty?
You need adb and fastboot. If you don`t have it, download from here & unpack it in e.g. C:\Android.
Also download rom what you want, e.g. baidu rom 4.0.4 by AKA_Noodle. Open it via Winrar & take out boot.img, put it in C:\Android.
Don`t forget to copy rom to sdcard
Then open DOS Command Prompt
Code:
win + R > Type "CMD"
Connect Desire V to BB by USB cable & type in Command Prompt window
Code:
CD C:\Android
adb reboot bootloader (your device should reboot into fastboot mode)
fastboot flash boot boot.img
Reboot your Desire V into recovery mode & flash rom via CWMrecovery.
Of course you need a properly installed drivers.
Hi All,
I'm trying to get into the correct state to be able to use a custom rom, following the instructions below.
When I get to the
Code:
fastboot -i 0x0b05 flash recovery ne0zone75_tf300t.blob
step, it flashes, but then the device will not enter recovery.
Is this step required for Crombikk or the Lollipop Roms?
I can get the hairybean bootloader on, does it matter what version of TWRP is on the tablet?
The first version that you flash using the instructions below works ok.
Thanks
RR
lj50036 said:
UPGRADE INSTRUCTIONS, STEP BY STEP​
This may help
Starting from a stock bootloader V 10.4.2.18
What you will need
Woking fastboot & adb / SDcard optional
TWRP for a 201 = twrp_tf201t.blob
@ne0zone75 TWRP for the 300 = ne0zone75_tf300t.blob
HairyBean BL & TWRP: This is effectively turn your 201 into a 300 <---- which is a flashable zip inside the zip that you downloasd
All 3 of the above file are in a zip in the Download section @ the top of every page of the thread ...... THIS ZIP IS NOT FLASHABLE...Your must unzip it to get to the real files !!! The name of this zip is 'upgrade_tf201_to_tf300t.zip'
CROMBI 201 ROM zip
A fully charged tablet
All the above files in the same directory as your fastboot.exe (if using windows) In your home folder on linux....
The process
Lets start with the TWRP recovery for the 201, let flash it with fastboot...
Power your tablet off and with the [ VOL DOWN & POWER ] buttons boot the tablet into the bootloader
Once there [ VOL DOWN ] untill the green box is on the USB ICON then [ VOL UP ] to select fastboot
Let make sure your PC can see your tablet with this command.
Code:
fastboot devices
Code:
fastboot -i 0x0b05 flash recovery twrp_tf201t.blob
Then
Code:
fastboot -i 0x0b05 reboot-bootloader
[ VOL UP ] ON RCK to enter recovery
Once in TWRP check to see if adb is working...
Code:
adb devices
Ok now that we know that is working let go ahead and push the HairyBean BL onto the tablet
Code:
adb push HairyBean_Bootloader_TWRP2.5.zip /sdcard
Now under the install tab in TWRP fine the folder and flash it....
reboot once it has fishined..If ask to install SuperUser say NO..........
LET THE BLUE BAR FILL !!!!!!!!! Once it has finished it will reboot into Hairybean TWRP....
Once booted into recovery, run this command to boot into fastboot
Code:
adb reboot-bootloader
You will see that the USB icon is missing now, this is good... If you still see the USB icon DON'T go to the next step
Now lets flash @ne0zone75 TWRP recovery
Code:
fastboot -i 0x0b05 flash recovery ne0zone75_tf300t.blob
Once that has finished let reboot into bootloader
Code:
fastboot -i 0x0b05 reboot-bootloader
Now enter recovery....
Make sure its verison 2.7.1.0
Go to Wipe////Format Data////Type yes
This can take up to 90 mins to format
DO NOT INTERRUPT THE FORMAT !!!!!!!
Now lets push CROMBI-KK onto your tab
Code:
adb push cm-11.0-2014xxxx-crombi-kk-tf201t.zip /sdcard
Find it under the install tab and flash it..
REBOOT into android, first boot can take up to 15 minutes
Click to expand...
Click to collapse
RangeyRover1 said:
Hi All,
I'm trying to get into the correct state to be able to use a custom rom, following the instructions below.
When I get to the
Code:
fastboot -i 0x0b05 flash recovery ne0zone75_tf300t.blob
step, it flashes, but then the device will not enter recovery.
Is this step required for Crombikk or the Lollipop Roms?
I can get the hairybean bootloader on, does it matter what version of TWRP is on the tablet?
The first version that you flash using the instructions below works ok.
Thanks
RR
Click to expand...
Click to collapse
How many icon do you see on the bootloader screen ?
Thx Josh
Hairybean Bootloader
lj50036 said:
How many icon do you see on the bootloader screen ?
Thx Josh
Click to expand...
Click to collapse
4 originally.
When I flash the Hairybean bootloader, 3
I think the intent of the question is to see if I have managed to get the bootloader on?
I think that I have as I no longer have the USB icon.
Thanks
RR
Fix to be able to install CrombiKK and Lollipop
Hi All,
In answer to the question posed in the OP, these are the steps I used to be able to install Lollipop on my TF201.
They are slightly different from Josh's instructions, as I used the latest TWRP for a TF300T, after I flashed the Hairybean Bootloader. Ne0win blob did not work for me.
These steps worked for me. I also flashed the gapps package and TF201 compatability linked to in the original Lollipop thread.
http://forum.xda-developers.com/transformer-tf300t/development/rom-t2932783
Posting this to help others struggling for the first time to flash their tf201.
Regards
RR
lj50036 said:
UPGRADE INSTRUCTIONS, STEP BY STEP​
This may help
Starting from a stock bootloader V 10.4.2.18
What you will need
Woking fastboot & adb / SDcard optional
TWRP for a 201 = twrp_tf201t.blob
TWRP for the 300 = openrecovery-twrp-2.8.3.0-tf300t.blob from here http://teamw.in/project/twrp2/97
HairyBean BL & TWRP: This is effectively turn your 201 into a 300 <---- which is a flashable zip inside the zip that you downloasd
2 of the above file are in a zip in the Download section @ the top of every page of the thread ...... THIS ZIP IS NOT FLASHABLE...Your must unzip it to get to the real files !!! The name of this zip is 'upgrade_tf201_to_tf300t.zip'
CROMBI 201 ROM zip
A fully charged tablet
All the above files in the same directory as your fastboot.exe (if using windows) In your home folder on linux....
The process
Lets start with the TWRP recovery for the 201, let flash it with fastboot...
Power your tablet off and with the [ VOL DOWN & POWER ] buttons boot the tablet into the bootloader
Once there [ VOL DOWN ] untill the green box is on the USB ICON then [ VOL UP ] to select fastboot
Let make sure your PC can see your tablet with this command.
Code:
fastboot devices
Code:
fastboot -i 0x0b05 flash recovery twrp_tf201t.blob
Then
Code:
fastboot -i 0x0b05 reboot-bootloader
[ VOL UP ] ON RCK to enter recovery
Once in TWRP check to see if adb is working...
Code:
adb devices
Ok now that we know that is working let go ahead and push the HairyBean BL onto the tablet
Code:
adb push HairyBean_Bootloader_TWRP2.5.zip /sdcard
Now under the install tab in TWRP fine the folder and flash it....
reboot once it has fishined..If ask to install SuperUser say NO..........
LET THE BLUE BAR FILL !!!!!!!!! Once it has finished it will reboot into Hairybean TWRP....
Once booted into recovery, run this command to boot into fastboot
Code:
adb reboot-bootloader
You will see that the USB icon is missing now, this is good... If you still see the USB icon DON'T go to the next step
Now lets flash TF300t version of TWRP recovery
Code:
fastboot -i 0x0b05 flash recovery openrecovery-twrp-2.8.3.0-tf300t.blob
Once that has finished let reboot into bootloader
Code:
fastboot -i 0x0b05 reboot-bootloader
Now enter recovery....
Make sure its verison 2..8.3.0
Go to Wipe////Format Data////Type yes
This can take up to 90 mins to format
DO NOT INTERRUPT THE FORMAT !!!!!!!
Now lets push CROMBI-KK onto your tab
Code:
adb push cm-11.0-2014xxxx-crombi-kk-tf201t.zip /sdcard
Find it under the install tab and flash it..
REBOOT into android, first boot can take up to 15 minutes
Click to expand...
Click to collapse