Everythink is isn't responding - Galaxy S III Q&A, Help & Troubleshooting

Hello, after i reinstalled firmware on i9300 my phone getting all is isn't responding like "samsung setup wizard isn't responding", "process system isn't responding" etc.. And then phone restart. But sometimes phones boot normally, but then he asks for SIm pin code, numbers doesnt pressing, but i can unlock screen. And on samsung setup keyboard doesnt pops up. What should i do?

Post lacks details what how .

cizas22 said:
Hello, after i reinstalled firmware on i9300 my phone getting all is isn't responding like "samsung setup wizard isn't responding s3", "process system isn't responding" etc.. And then phone restart. But sometimes phones boot normally, but then he asks for SIm pin code, numbers doesnt pressing, but i can unlock screen. What should i do?
Click to expand...
Click to collapse
Reboot into recovery and factory reset...Also what firmware and how did you install? Their is lack of detail in your post but first try factory reset.

tallman43 said:
Reboot into recovery and factory reset...Also what firmware and how did you install? Their is lack of detail in your post but first try factory reset.
Click to expand...
Click to collapse
I installed "I9300XXUGML2_I9300OXFGML2_I9300XXUGMK6_HOME" this firmware THIS SEB, because im from Lithuania. I installed with Odin. But i did factory reset after i installed firmware.

cizas22 said:
I installed "I9300XXUGML2_I9300OXFGML2_I9300XXUGMK6_HOME" this firmware THIS SEB, because im from Lithuania. I installed with Odin. But i did factory reset after i installed firmware.
Click to expand...
Click to collapse
Did you also wipe cache if yes try another rom or reinstall and factory reset and wipe before and after flashing.

tallman43 said:
Did you also wipe cache if yes try another rom or reinstall and factory reset and wipe before and after flashing.
Click to expand...
Click to collapse
Same error. But i tried to make Firmware upgrade on Kies and i get Service version : PDA:NA5 / PHONE:NA8 / CSC:NA1 (O2U), I dont know exactly this phone, because this was my uncle who give it to me now, but he doesnt say about this phone. I think i need to change phone CSC, because in Lithuania where is no O2 service.

Flash a stock rom via Odin

JJEgan said:
Flash a stock rom via Odin
Click to expand...
Click to collapse
I did it many times.

Bump. Please help me.

Recovery format system sdcard data cache and preload .
Boot to download mode flash stock rom fails you need a service repair .

JJEgan said:
Recovery format system sdcard data cache and preload .
Boot to download mode flash stock rom fails you need a service repair .
Click to expand...
Click to collapse
This is expensive repair?

Related

bricked my phone

i just bricked my phone with script manager,done something wrong.What can i do to unbrick?1 question,can i wipe data/factory reset and phone will be fixed?
What did you mean bricked? Can you turn you phone one, whats happened after this, I think you have only a bootloop. If you can access recovery menu try wipe, if it doesn't help reflash you rom using ODIN.
dragonnn said:
What did you mean bricked? Can you turn you phone one, whats happened after this, I think you have only a bootloop. If you can access recovery menu try wipe, if it doesn't help reflash you rom using ODIN.
Click to expand...
Click to collapse
when i turn phone on it shows me galaxy ace gt-5830 then it stops at a blank screen and i can acces in recovery so at least im happy its not a hard brick
Maybe go into recovery and try to flash your rom again, good luck
silvercrus1 said:
when i turn phone on it shows me galaxy ace gt-5830 then it stops at a blank screen and i can acces in recovery so at least im happy its not a hard brick
Click to expand...
Click to collapse
Your phone is not bricked. You have a minor inconvenience. Wipe everything and flash new firmware.
Sent from a phone with an app.
sdotmouse said:
Your phone is not bricked. You have a minor inconvenience. Wipe everything and flash new firmware.
Sent from a phone with an app.
Click to expand...
Click to collapse
if i factory reset/wipe data wouldnt it make the phone like the first time i bought it i mean with firmware and all?i need to flash a firmware again?
silvercrus1 said:
if i factory reset/wipe data wouldnt it make the phone like the first time i bought it i mean with firmware and all?i need to flash a firmware again?
Click to expand...
Click to collapse
Choose whatever rom you want and install as normal through recovery. Wipe data/cache/factory reset and install .zip file. Done.
Sent from a phone with an app.
sdotmouse said:
Choose whatever rom you want and install as normal through recovery. Wipe data/cache/factory reset and install .zip file. Done.
Sent from a phone with an app.
Click to expand...
Click to collapse
but all roms need KPH or KPN baseband and i have KP7.and i just wanted to factory reset and return back to stock
silvercrus1 said:
but all roms need KPH or KPN baseband and i have KP7.and i just wanted to factory reset and return back to stock
Click to expand...
Click to collapse
Just to make sure, flash it with a full package. (Zip containing 4 files instead of one big one). It'll turn everything to stock including system format just in case you messed that up. Flash it via ODIN and make sure to follow instructions so you won't have another inconvenience.
SuperAce609 said:
Just to make sure, flash it with a full package. (Zip containing 4 files instead of one big one). It'll turn everything to stock including system format just in case you messed that up. Flash it via ODIN and make sure to follow instructions so you won't have another inconvenience.
Click to expand...
Click to collapse
can you give me some guides on how to do that?i cant find any
up!!!!!!!!

Help, cannot flash through odin, it keeps failing

BEFORE anyone mention that this problem has been mentioned before, read twice.
i was on omega rom, it kept rebooting. so i cleared cache and all that stuff. shut down the phone, booted in download mode. tried flashing my stock firmware KK3, it goes up to flashing kernel then fails.
when i turn the phone off and on i get the a different screen saying firmware upgrade failed try restoring via kies.
i tried lp2 firmware it flashes fine. could it be that i was using ICS before and now it doesnt let me go back to 2.3.6
pls respond with solutions
Omega has ICS themed ROMs but no ICS firmware ROMs so it wont be cos of that.Did you try a full system wipe before the flash??
boot to recovery and wipe cache partition.Then go to "mounts and storage" and format System/Data/Cache and then do a factory reset then reboot.The Phone probably wont go past the Galaxy-S logo so pull the battery then put it back in and boot to download mode and try the flash again.If that doesnt work you could try to flash the F/W that works and then flash a new kernel.After that try the 2.3.6 flash again.
cooza said:
Omega has ICS themed ROMs but no ICS firmware ROMs so it wont be cos of that.Did you try a full system wipe before the flash??
boot to recovery and wipe cache partition.Then go to "mounts and storage" and format System/Data/Cache and then do a factory reset then reboot.The Phone probably wont go past the Galaxy-S logo so pull the battery then put it back in and boot to download mode and try the flash again.If that doesnt work you could try to flash the F/W that works and then flash a new kernel.After that try the 2.3.6 flash again.
Click to expand...
Click to collapse
Thx I will try it soon. But how come I can flash ics kp8 and lp2 roms
Are you using the new bootloader then?
That one Im not sure of but I have read on other threads that people have had to "repartition" their phones to be able to flash back from ICS.Not bieng on ICS I dont see why you cant as the Omega ROM was just themed.Im on the latest Omega and its 2.3.6. so 100% positive it wasnt ICS.Also Try stupid things like another com port.Happened to me once.The one I was using when I had an i9000 stopped letting me flash it via Odin when it reached the same stage every time I tried.Dont Know why.Just had to change ports.Try everything:
1.Full wipe and flash.....If that dont work then...
2.Flash F/W that works then change kernel and flash old bootloader(as mentioned above)never know,might work.
http://www.multiupload.com/LQQBRQVJUD
Flash it in PDA in Odin.
ALso you could try a program called "Fus Downloader"
http://fus.nanzen.se/
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
when i had problems with odin failing i changed the usb cable and it worked a treat. wouldnt work at all with a cheap unofficial cable
KevandLynds said:
when i had problems with odin failing i changed the usb cable and it worked a treat. wouldnt work at all with a cheap unofficial cable
Click to expand...
Click to collapse
True.Same thing happened to my mate.He has an i9000 and Odin stopped flashing his phone but only if he used a PIT file so I gave him my i9100 cable and it started flashing his phone again with PIT file selected.Weird how things work sometimes for no real reason.Anyway Nandroid backups are always a good call.could have saved some trouble the this case.Ive got a Nandroid backup on my phone and copied to DropBox thats months old but it would get me out of trouble if this sort of thing happened to me Even though its old as.Gotta have that saftey net.
zabihjan said:
BEFORE anyone mention that this problem has been mentioned before, read twice.
i was on omega rom, it kept rebooting. so i cleared cache and all that stuff. shut down the phone, booted in download mode. tried flashing my stock firmware KK3, it goes up to flashing kernel then fails.
when i turn the phone off and on i get the a different screen saying firmware upgrade failed try restoring via kies.
i tried lp2 firmware it flashes fine. could it be that i was using ICS before and now it doesnt let me go back to 2.3.6
pls respond with solutions
Click to expand...
Click to collapse
Try flashing a Gignerbread bootloader using Odin
happel92 said:
Try flashing a Gignerbread bootloader using Odin
Click to expand...
Click to collapse
I will try it soon thx
Sent from my GT-I9100 using Tapatalk
JJEgan said:
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
Click to expand...
Click to collapse
Tried dont work i can only flash ics roms
Sent from my GT-I9100 using Tapatalk
pulser_g2 said:
Are you using the new bootloader then?
Click to expand...
Click to collapse
Old bootloader as i can use my jig to clear counts
Sent from my GT-I9100 using Tapatalk
cooza said:
Omega has ICS themed ROMs but no ICS firmware ROMs so it wont be cos of that.Did you try a full system wipe before the flash??
boot to recovery and wipe cache partition.Then go to "mounts and storage" and format System/Data/Cache and then do a factory reset then reboot.The Phone probably wont go past the Galaxy-S logo so pull the battery then put it back in and boot to download mode and try the flash again.If that doesnt work you could try to flash the F/W that works and then flash a new kernel.After that try the 2.3.6 flash again.
Click to expand...
Click to collapse
Didnt work
Sent from my GT-I9100 using Tapatalk
Mate,thats a strange one alright.
Any luck yet.I was thinking that you might have to look for a package that has the older 4 file flash with pit.Its possible that maybe you need to repartition your device.Might be hard to find thought.

phone not powering off

Hi guys I have a problem with my phone as it wouldn't switch off, it will just restart itself, it started happening after I unrooted my phone, I am on Three network, I installed it back to the stock firmwire I9300XXALF6_I9300H3GALF1_I9300NELF1_HOME.tar.md5, any ideas please
hon84 said:
Hi guys I have a problem with my phone as it wouldn't switch off, it will just restart itself, it started happening after I unrooted my phone, I am on Three network, I installed it back to the stock firmwire I9300XXALF6_I9300H3GALF1_I9300NELF1_HOME.tar.md5, any ideas please
Click to expand...
Click to collapse
Pull the battery, go in recovery and do a data factory reset, clear the cache and reboot. That should fix it
gee2012 said:
Pull the battery, go in recovery and do a data factory reset, clear the cache and reboot. That should fix it
Click to expand...
Click to collapse
hi, I have tried it but its still doin it, any other idea??
hon84 said:
hi, I have tried it but its still doin it, any other idea??
Click to expand...
Click to collapse
Go to recovery mode
Wipe data / Wipe cache / Wipe dalevik cache
When finished, remove the battery to power-off the phone.
Launch ODIN on your computer and flash your full firmware (the lastest available for your phone).
Don't boot your phone between wipe and flash. When you push the battery on the phone, turn it directly in Download mode.
To finish, go to recovery mode and wipe data
It will remove all files for sure. I have similar issue with my I9300 : wipe data / wipe cache from recovery doesn't remove Clockwork mode and SuperSu !
lelinuxien52 said:
Go to recovery mode
Wipe data / Wipe cache / Wipe dalevik cache
When finished, remove the battery to power-off the phone.
Launch ODIN on your computer and flash your full firmware (the lastest available for your phone).
Don't boot your phone between wipe and flash. When you push the battery on the phone, turn it directly in Download mode.
To finish, go to recovery mode and wipe data
It will remove all files for sure. I have similar issue with my I9300 : wipe data / wipe cache from recovery doesn't remove Clockwork mode and SuperSu !
Click to expand...
Click to collapse
Hi, I have done the steps you have listed but this the same
hon84 said:
Hi, I have done the steps you have listed but this the same
Click to expand...
Click to collapse
Oupss. Can you give us information reported by *#1234# on dialer ? Perhaps a CSC <unknow> issue.
Have you tried flashing CF root and enter recovery and format the phone .
Outside of that it looks like a JTag repair or service centre repair .
jje
lelinuxien52 said:
Oupss. Can you give us information reported by *#1234# on dialer ? Perhaps a CSC <unknow> issue.
Click to expand...
Click to collapse
ap i9300xxalf6
cp i9300nelf1
csc i9300h3galf1
Factory Reset
Pull the battery, and do a factory reset in recovery.
hon84 said:
Hi guys I have a problem with my phone as it wouldn't switch off, it will just restart itself, it started happening after I unrooted my phone, I am on Three network, I installed it back to the stock firmwire I9300XXALF6_I9300H3GALF1_I9300NELF1_HOME.tar.md5, any ideas please
Click to expand...
Click to collapse
It must be a software issue mate as i was on the same software and might just kept rebooting too but since i've been installing the Jelly Bean Leaked Roms i aint had any problems

[Q] Help, bootloop after rom update

Hi everyone, i've got a huge problem with my i9300, i've got the foxhound/[email protected] rom since a week, and everything worked fine, i updated once without problems, however today i did the update with usual procedure, but now i've rebooted and i'm stuck on a bootloop after the apps optimizing part, where Android tries to optimize two apps, then open them, but then boot animation starts again over and over.
I tried going into recovery but it did not do anything, so i i tried flashing CWM via Odin, however now if i try starting in recovery only the samsung boot screen shows up and stays there forever.
Please help me
Pureemousseline said:
Hi everyone, i've got a huge problem with my i9300, i've got the foxhound/[email protected] rom since a week, and everything worked fine, i updated once without problems, however today i did the update with usual procedure, but now i've rebooted and i'm stuck on a bootloop after the apps optimizing part, where Android tries to optimize two apps, then open them, but then boot animation starts again over and over.
I tried going into recovery but it did not do anything, so i i tried flashing CWM via Odin, however now if i try starting in recovery only the samsung boot screen shows up and stays there forever.
Please help me
Click to expand...
Click to collapse
Go to CWM recovery and do a data/factory reset, wipe cache and dalvik cache, reboot and restore your apps.
gee2012 said:
Go to CWM recovery and do a data/factory reset, wipe cache and dalvik cache, reboot and restore your apps.
Click to expand...
Click to collapse
Well, problem is i cannot access recovery, but thanks for helping
Go in downloadmode and flash a stock rom with Odin. See item 2 and 3 in my signature
Sent from my GT-I9300 using xda premium
Is it possible to do so without wipe data ? I've got loads of things in there and my precedent Ti backup does not include them
Pureemousseline said:
Is it possible to do so without wipe data ? I've got loads of things in there and my precedent Ti backup does not include them
Click to expand...
Click to collapse
Well just installedit, still the same bootloop problem, just boot screen changes
Up, please help me, i'm so desperate right now
Flash Root via ODIN .
ROOT
http://forum.xda-developers.com/showthread.php?t=1684535
then recovery and Nandroid restore .
Fails then .
Wipe phone flash stock rom via Odin .
jje
JJEgan said:
Flash Root via ODIN .
ROOT
http://forum.xda-developers.com/showthread.php?t=1684535
then recovery and Nandroid restore .
Fails then .
Wipe phone flash stock rom via Odin .
jje
Click to expand...
Click to collapse
THANKS SO MUCH FOR THIS I MANAGED TO GO TO RECOVERY AND DO THE UPDATE AGAIN, NOW MY PHONE WORKS PERFECTLY WITHOUT LOSING DATA !!!!
Thank you really really much for this

"com.samsung.ιpservιce has stopped" spam

Hello, i have a problem with my friends phone (s6 edge). After some time it upgraded to 7.0.0 his googleapps crashed entirely, no playstore etc, so we had to restore it through the Samsung smart app -> emergency firmware etc after we took a backup of his files.
The phone was completely restored BUT after connecting to the wifi or data to connect online, the tittle message spam him all the time. Did so google research, even got to recovery to reset it again to factory but i had no luck. Custom Rom is a no-go since its still under warranty. I though of restoring it to 6.0.1 through odin but ive read thats not 100% working.
Any insights?
Thanks in advance
OldSnake88 said:
Hello, i have a problem with my friends phone (s6 edge). After some time it upgraded to 7.0.0 his googleapps crashed entirely, no playstore etc, so we had to restore it through the Samsung smart app -> emergency firmware etc after we took a backup of his files.
The phone was completely restored BUT after connecting to the wifi or data to connect online, the tittle message spam him all the time. Did so google research, even got to recovery to reset it again to factory but i had no luck. Custom Rom is a no-go since its still under warranty. I though of restoring it to 6.0.1 through odin but ive read thats not 100% working.
Any insights?
Thanks in advance
Click to expand...
Click to collapse
No it to recovery and wipe cache then reboot. Normally fixes it
callumbr1 said:
No it to recovery and wipe cache then reboot. Normally fixes it
Click to expand...
Click to collapse
Thanks for the reply.
I am afraid i have already tried that.
Wiped cache , wiped dalvic , did a factory wipe through the recovery mode. It didn't help
OldSnake88 said:
Thanks for the reply.
I am afraid i have already tried that.
Wiped cache , wiped dalvic , did a factory wipe through the recovery mode. It didn't help
Click to expand...
Click to collapse
Try a package disable app to stop it from occurring.

Categories

Resources