[Q] help...phone stuck on htc white screen - HTC Rezound

My phone was acting up by randomly shutting off....so I decided to do a factory reset. Sort of knowing and not knowing what to do I went into twrp recovery and not only doing a factory wipe, I wiped the internal sd as well. This got me stuck on the HTC white screen.
As of now...I'm on the boot screen where I have this...
UNLOCKED
Vigor PVT SHIP S-ON RL
HBOOT- 2.28
RADIO- 2.23.10.0123r/2.23.10.0124r
OpenDSP-v14.6.0.7708.00.0507
When I hit HBOOT it reads..
SD CHecking
Loading...PH98.img
no image
I've tried locking the bootloader and flashing the RUU and PH98IMG_ICS_4.03.605.2 but got stuck with a message that says "older hboot version" or something like that.
I've also tried fastboot boot boot.img as well but no luck there.
Also tried installing the ph98img.zip and flashing that in twrp (version 2.5.0.0) and that failed to (error flashign zip /sdcard/ph98img.zip)
At this point, I've been mulling over info on xda and other sites....i'm pretty much lost and at a loss...dont know what to do?
Anyone willing to guide me through in getting my rezound to work again?

I have the same problem
And I have the same problem my phone is stuck on the screen-and-white logo htc
my phone
HTC Rezound
LOCKED
Vigor PVT SHIP S-ON RL
HBOOT- 2.28
RADIO- 2.23.10.0123r/2.23.10.0124r
OpenDSP-v14.6.0.7708.00.0507
Is there a solution to this problem .. please,: البكاء:

Have y'all tried going back in and reinstalling ROM?
Sent from my ADR6425LVW using Tapatalk

jagrave said:
Have y'all tried going back in and reinstalling ROM?
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
Originally I tried the RUU ICS 3.14 , but the hboot was older.
Tried the latest PH98IMG ICS 4.03 and then the firmware and loaded it to the sd card so it would go thru hboot. I did lock the bootloader. Then loaded the boot image. But still go the white/htc splash screen.
when back to the bootloader screen, when hboot ran, it kept saying the image wasn't on file.
when in recovery, tried wiping dalvik cache and everything, sometimes it would fail...something about eemc not mounting.
Either I'm not doing something right (most likely) or something else is the matter with the phone.

diginchili said:
Originally I tried the RUU ICS 3.14 , but the hboot was older.
Tried the latest PH98IMG ICS 4.03 and then the firmware and loaded it to the sd card so it would go thru hboot. I did lock the bootloader. Then loaded the boot image. But still go the white/htc splash screen.
when back to the bootloader screen, when hboot ran, it kept saying the image wasn't on file.
when in recovery, tried wiping dalvik cache and everything, sometimes it would fail...something about eemc not mounting.
Either I'm not doing something right (most likely) or something else is the matter with the phone.
Click to expand...
Click to collapse
emmc not mounting is not good....even worse that not mounting while s-on means its hard bricked bud

REV3NT3CH said:
emmc not mounting is not good....even worse that not mounting while s-on means its hard bricked bud
Click to expand...
Click to collapse
Ugh.....no bueno for me. I tried reformatting and repartitioning with no luck as we'll
So essentially, even though it turns on and can go to recovery, I'm still fubar'd with this phone eh?
I already ordered another (different) phone but will have learn to root that.

Related

Help on Rezound please

OK.. Brand new Rezound. I used Hasoon's All-In-One Kit and I was able to unlock and install the CWM (GB). But I was unable to do anything else. I am looking to just get Root for some programs I like.
But now I thing something went terribly wrong when I tried load a new PH98IMG.zip. I got in the bootloader (power+vol down) and I see:
**** Unlocked ****
Vigor PVT SHIP S-ON RL
HBOOT-2.11.0000
RADIO-0.95.00.1118r/0.95.00.1223r
OpenDSP-v10.6.0.7611.00.0919
eMMC-boot
Oct 6 2011, 15:43:22
Memory Card contents: PH98IMG.zip, GB Firmware Patch.zip and Vigor_Stock_Doedexed_3.14.605.5.zip
**Note: I have yet to register this phone with Verizon**
At startup, with the memory card in it will allow me to boot into a screen called HBOOT where I can select FastBoot, Recovery, etc.. It then starts the upgrade process and says Done! so I reboot. After the second HTC screen flashes the screen goes blank and does nothing else.
I removed the memory card and attempted a Factory Reset, but nothing seems to work.
Thoughts? Help?? I am new at this but was successful on my previous Rezound so I am not sure whats going on here.
Appreciate it.
OK. Loaded Vigor and the GB Firmware but not PH98IMG.zip to the SD Card and used Recovery to flash.
Rebooted the phone and am now at the 4GLTE screen. Hoping it gets further, but now that I have gotten there, should I use the Bootloader to run PH98IMG.ZIP?
*** UPDATE ***
Ok.. I went ahead and copied the PH98IMG.ZIP and updated via bootloader and it all works now.. Wow.. What a pain in the arse!!

[Q] I think I may have messed up big time....

I'm pretty sure I made a pretty big NOOB mistake here....
I was running the CodefireX CM10 Nightlies and was having some problems with my WiFi and 3G connections, so I went to change roms and wiped full cache, davlik, factory.
I flashed the Mean Rom and was stuck on the boot screen... In a panic, I quickly wiped and went back to CodefireX only to find that I was stuck on the CyanogenMod bootscreen as well for over 30 mins until my phone died.
I started fishing around to try to find a resolution to my issue and was told to relock my bootloader and RUU, so I did and the RUU failed.
The RUU that I ran was:
RUU_JEWEL_CL_ICS_40_Sprint_WWE_1.12.651.2_Radio_1.02.11.0423_2_NV_SPCS_2.28_003_release_257970_signed
I lost TWRP, cannot boot my phone past the bootloader and am lost with no idea on how to get my phone working again.
Currently this is what I have on my screen.
***TAMPERED***
***RELOCKED***
JEWEL PVT SHIP S-ON RL
HBOOT-1.19.000
RADIO-1.12.11.0809
OpenDSP-v29.1.0.45.0622
eMMC-boot
Please help :-/
You need to try ruu 2.13. You have hboot 1.19.000 and any older ruu than 2.13 won't work.
diesel941 said:
I'm pretty sure I made a pretty big NOOB mistake here....
I was running the CodefireX CM10 Nightlies and was having some problems with my WiFi and 3G connections, so I went to change roms and wiped full cache, davlik, factory.
I flashed the Mean Rom and was stuck on the boot screen... In a panic, I quickly wiped and went back to CodefireX only to find that I was stuck on the CyanogenMod bootscreen as well for over 30 mins until my phone died.
I started fishing around to try to find a resolution to my issue and was told to relock my bootloader and RUU, so I did and the RUU failed.
The RUU that I ran was:
RUU_JEWEL_CL_ICS_40_Sprint_WWE_1.12.651.2_Radio_1.02.11.0423_2_NV_SPCS_2.28_003_release_257970_signed
I lost TWRP, cannot boot my phone past the bootloader and am lost with no idea on how to get my phone working again.
Currently this is what I have on my screen.
***TAMPERED***
***RELOCKED***
JEWEL PVT SHIP S-ON RL
HBOOT-1.19.000
RADIO-1.12.11.0809
OpenDSP-v29.1.0.45.0622
eMMC-boot
Please help :-/
Click to expand...
Click to collapse
The RUU you ran is an older RUU as far as I can tell you need the RUU for your HBOOT 1.19 that may be the reason it failed PM om4 he knows alot more stuff then me regarding this area
Just run the latest ruu and you should be fine, for future reference meanrom will hang and reboot. The first flash (clean flash) will take anywhere from 5-10 minutes. Should the kernel installer fail then you extract the boot.img from the Rom zip and place it in adb tools or SDK and flash it in fastboot

[Q] EVO 3D GSM boot loop after ics ruu

Sorry to bother, I was to post this last night, then I tried a bit more and failed, I really need help now!
htcdev unlocked Evo 3D GSM(shooteru)
HBOOT shows below:
SHOOTER-U PVT SHIP S-ON RL
H-Boot-1.49.0018
eMMC-boot
I have been through and still in this mess since last afternoon, totally noob at the beginning, so forgive my stupid mistakes please.
1. I tried to use cwm v4.0.1.4 to flash the cm9-20130310-nightly-shooteru.zip (with gapps-ics-20120429-signed.zip)into the phone, and wiped cache and data before install zip. But after the installation, the phone just stuck at the HTC logo screen, fastboot mode and cwm are still available.
2. Flash in the boot.img but no luck.
3. Tried the official RUU_SHOOTER_U_ICS_35_S_htc_Asia_HK... but error 155 was reported.
4. Then I do some google and drag the rom.zip file from the RUU, renamed it to PG86IMG.zip and copied it to my SD card. FASTBOOT loaded the file, but the situation doesn't change a bit.
5. Google again, change my CID according to the android-info.txt extract from the ruu rom, relock the phone, and the RUU installed successfully, at least it looks like that at the moment, but it comes out that it just stay in boot loop.
6. Now I dont even have the official recovey(also boot loop), unlocked it again thru htcdev, tried to flash in the cwm touch v5.8.0.2 for shooteru, did not work. So status right now is unlocked, s-on, hboot 1.53.0007, no recovery, keep rebooting.
7. Exhausted and frustrated, I come here for any help. It's driving me crazy now, 'cause this is a friend(a girl indeed)'s phone.
I really need your help, pls!
Appreciate any relate information and concern in advance!
#################################################
rerun the ruu and set to the factory mode in hboot, problem solved!
forgot to mention
I don't know if this still matter though, I can see the cm9 robot screen after the RUU install failed in the step 3 because of wrong cid, but it stuck about 20 minutes, so I changed to the RUU method.
I think you have to be on an hboot 00007
花、不凋落っ said:
I think you have to be on an hboot 00007
Click to expand...
Click to collapse
thank you, I found out this and solve the problem by reinstall from the ruu, forgot to delete my post.

[Q] Evo 3D weird bootloop

-Unlocked-
SHOOTER_U PVT SHIP S-OFF RL
HBOOT-1.49.007
RADIO-11.25.3504.06_M
OpenDSP-v02.6.0.2226.00.0202
eMMC-boot
So the problem here is that my Evo 3D GSM bootloops no matter what i flash. I can get in to HBOOT and Fastboot but can't get in to recovery, or boot a rom. I tried flashing various versions of cwm and 4EXT and none seem to work. I boot to HBOOT select recovery but it just goes back to bootlooping. Tried flashing various roms (had Viper3D for like a month and then one night it started bootlooping), even tried flashing a RUU multiple times but the bootloop goes on. And since that didn't help i unlocked again and downgraded HBOOT. For a period of time the phone didn't boot but that was because the battery is drained and can't charge when off, so I'm using a Desire X battery.
Before flashing RUU
-Revolutionary-
SHOOTER_U PVT SHIP S-OFF RL
HBOOT-1.49.1107
RADIO-11.25-3504.06_M
OpenDSP-v02.6.0.2226.00.0202
eMMC-boot
Any ideas would be helpfull.
I don't know what ruu you need, but you need to make sure its right.
Then without hooking your phone up, run ruu on windows.
Let it load up, the go to run and type %temp%
In the window that pops up, look for the newest folder, that will contain a file named rom.zip drag it to your desktop.
Rename it pg86img.zip
Now, you need to get that file to the root of your sd card, use a card reader, another phone, something.
Make sure it is the only pg86img.zip on your card.
Once you have the pg86img.zip on your sd, put it back in your EVO, and boot to bootloader. Accept the update and it should do the rest.
Do no relock before you do this. It is not necessary.
When you finally get booted remove that file or rename it.
Hope that gets you going
Sent from my HTCEVOV4G using xda app-developers app
Sorry for taking so long to reply, didn't have the time until now. I tried your method and it still didn't work
Though this I might try but I'm not too cozy with having to brick my device and i have no Linux experience. Not much else I can try...
Also is there a way to get back S-ON, because a while ago I sent the phone to repairs but they rejected my warranty because of s-off and revolutionary. Is my warranty still valid even if I revert back?
are you sure recovery is flashed ok? drivers may be the issue. try reinstalling drivers and running RUU or flashing recovery

Soft Brick DNA, Unable to RUU

I thought all my phones were S-off and I screwed up big time.
looks like I wiped the system instead of flashing the boot.img for S-on
I can get into TWRP.
I can push a Rom but it will NOT install and when I reboot the rom is deleted from internal SD card.
Unable to mount /data
Unable to mount system
If I attempt a normal reboot it gets stuck at the HTC boot screen. Holding the power button with or without volume down is unresponsive.
I tried relocking and RUU. gives me an error and will not complete.
HBOOT- 1.33.0001
Radio- 1.01.04.0308
S-on
Unlocked
Any thoughts to getting RUU to work or another solution would be much appreciated.
Icyman said:
I thought all my phones were S-off and I screwed up big time.
looks like I wiped the system instead of flashing the boot.img for S-on
I can get into TWRP.
I can push a Rom but it will NOT install and when I reboot the rom is deleted from internal SD card.
Unable to mount /data
Unable to mount system
If I attempt a normal reboot it gets stuck at the HTC boot screen. Holding the power button with or without volume down is unresponsive.
I tried relocking and RUU. gives me an error and will not complete.
HBOOT- 1.33.0001
Radio- 1.01.04.0308
S-on
Unlocked
Any thoughts to getting RUU to work or another solution would be much appreciated.
Click to expand...
Click to collapse
Relock your boot loader. Then RUU.
Sent from my HTC6435LVW using XDA Free mobile app
biggiesmalls657 said:
Relock your boot loader. Then RUU.
Sent from my HTC6435LVW using XDA Free mobile app
Click to expand...
Click to collapse
I have done that already. Next to last paragraph in op.
Or are you suggesting I do it again?
Icyman said:
I have done that already. Next to last paragraph in op.
Or are you suggesting I do it again?
Click to expand...
Click to collapse
You Boot loader is or still Unlocked. Lock it before run RUU
also you need the right RUU for Hboot 1.33.0001
Check RUU version on Firmware here http://forum.xda-developers.com/showthread.php?t=2612740
Solved
The phone was on 2.07 firmware, internal storage may have been wiped and the 3.06 RUU.exe would not work.
I followed @.torrented Alt 3.06 RUU method.
This method only works when you are locked with a stock recovery.
@.torrented - Big thanks!

Categories

Resources