My razr cannot boot at all without charging.
There's no reaction at all. No Logo, No Bootanimation etc..
If it boots with charging, it just said 'Battery Low'
So, I tried with my factory cable but there's no reaction at all.
How can I charge my razr or fix it?
first; Try another adapter and plug.
may be due to custom rom
foz54 said:
first; Try another adapter and plug.
may be due to custom rom
Click to expand...
Click to collapse
I tried.
No reaction at all.
I think there's no problem with charge adapter.
My razr cannot boot at all without charging.
There's no reaction at all. No Logo, No Bootanimation etc..
If it boots with charging, it just said 'Battery Low'
So, I tried with my factory cable but there's no reaction at all.
How can I charge my razr or fix it?
Click to expand...
Click to collapse
You can't charge your phone with factory cable,it allows you to flash the fastboot file with Rsd lite.
Sent from Razr XT910
welder73 said:
You can't charge your phone with factory cable,it allows you to flash the fastboot file with Rsd lite.
Sent from Razr XT910
Click to expand...
Click to collapse
Then how can I fix it?
When I plug chaging cable, nothing happens after motorola logo.
I want to flash fastboot file to fix but I can't charge this phone at all.
already try charge it about 6 hours?
guitarholixx said:
already try charge it about 6 hours?
Click to expand...
Click to collapse
Yes.
I just pluged my razr with charging cable, but cannot charge
For my Razr, It,s even worst,
If I charge it when its off, I lose all the data... it gets a Factory reset.....
I don't know what to do with it....
Related
I have a droid razr that I rooted back in october when I first came out. It has worked perfectly fine up until last night when out of no where is just powered down and restarted. Once it restarted I realized it wasn't making it past the splash screen(if that's what it is called) and then reboots. It does this over and over. I downloaded Gingerbread 2.3.5 CDMA Droid Razr XT912 Verizon USA [Fastboot Files] and RSDlite so I could get my phone back to stock. Well before I was able to get into the fastboot loader my phone's battery ended up dieing. I plug it in to charge and it shows an empty battery with a question mark in the middle of it. Some please help cause I don't know if my battery is even taking a charge or if there is a better method to getting this fixed.
How long have you let it sit on the charger? You need a factory cable from team black hat. Google it. Not sure if they have any left out of this batch though.
Sent from my DROID RAZR using Tapatalk
You can also make a charging cable if your so inclined, instructions are around here somewhere.
Edit: http://forum.xda-developers.com/showthread.php?t=1077414
I was able to get a charge on it but when i get to the fastboot flash mode screen down below it says device is LOCKED. Not sure if that effects anything but when I tried to flash my phone using rsd lite it didn't work. It failed
Same thing happened to me when in RSDLite. I just restarted the computer and phone and it worked.
I tried rebooting and I still get the failed message in the rsdlite 5.6
dsmith093 said:
I was able to get a charge on it but when i get to the fastboot flash mode screen down below it says device is LOCKED. Not sure if that effects anything but when I tried to flash my phone using rsd lite it didn't work. It failed
Click to expand...
Click to collapse
I think there are 2 fast boot menus. Get to that screen again and hit volume down until you see "AP Fast boot" or something like that. Then hit volume up. Try RSD again.
Sent from my DROID RAZR using Tapatalk
mistawolfe said:
How long have you let it sit on the charger? You need a factory cable from team black hat. Google it. Not sure if they have any left out of this batch though.
Sent from my DROID RAZR using Tapatalk
Click to expand...
Click to collapse
By factory cable do you mean the one that came with the phone or another?
jtsativa420 said:
By factory cable do you mean the one that came with the phone or another?
Click to expand...
Click to collapse
No, you can purchase the cable from "Team Black Hat". The factory cable allows you to flash on RSD Lite without requiring your phone to have battery charge.
Sent from my XT910 using xda premium
eowyn0821 said:
No, you can purchase the cable from "Team Black Hat". The factory cable allows you to flash on RSD Lite without requiring your phone to have battery charge.
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
Thanks a million!! Searching for team black hats cable now!
other booloop power or charge battery option
i dont know if it really charges because i dont feel the battery gets hot but try this :
1 . conect the usb cable normaly to the pc and phone
2 press the power button and the vol - botton for a while till the phone restarts
2 right away press the 2 vol +and- toghether
3 the white battery light comes on and its suposingly charging
if it doesnt go on and the menue comes on, got to fastboot and then hit the power botton
5 when the phone is off disconect and conect the usb cable and the white light should be on now
Symptoms:
1. Hitting power does nothing
2. Power + down volume does nothing
3. Plugging into AC power = no green light
4. Plugging into USB (computer) power = green light (which stays on after unplugging)
I have:
1. Tried battery and SD card pull while plugged in and not plugged in
2. A friends BH5X battery
3. Leaving the battery out for an hour
4. Leaving it charge via the Motorola AC adapter over night
I am out of ideas. Something else that may help... when the phone died I plugged it in (AC) and it rebooted to the recovery menu. I hit reboot, and since then it will not power on... or charge apparently.
Even with a charged battery it wouldn't boot?
Sent from my MB870 using xda premium
CadenH said:
Even with a charged battery it wouldn't boot?
Sent from my MB870 using xda premium
Click to expand...
Click to collapse
Had a coworker charge my battery in his Droid X to 80% before he had to leave. I don't know what his battery was charged to in his phone, but I tried his as well with the same results. Does it have to be charged to 100%?
Xeno62277 said:
Had a coworker charge my battery in his Droid X to 80% before he had to leave. I don't know what his battery was charged to in his phone, but I tried his as well with the same results. Does it have to be charged to 100%?
Click to expand...
Click to collapse
I wouldnt think so.
So the battery just simply died and wont boot up now? You werent doing anything else to it?
jsgraphicart said:
I wouldnt think so.
So the battery just simply died and wont boot up now? You werent doing anything else to it?
Click to expand...
Click to collapse
My battery will boot my coworkers Droid X. When it died it shutdown due to low battery. I plugged it into AC power... it booted up to recovery, and I hit reboot from the menu... after that it is completely unresponsive.
Xeno62277 said:
My battery will boot my coworkers Droid X. When it died it shutdown due to low battery. I plugged it into AC power... it booted up to recovery, and I hit reboot from the menu... after that it is completely unresponsive.
Click to expand...
Click to collapse
If the battery worked on your coworkers droid X then its not your battery. Which means its hardware or software related. Were you running any roms or anything or were you completely stock?
jsgraphicart said:
If the battery worked on your coworkers droid X then its not your battery. Which means its hardware or software related. Were you running any roms or anything or were you completely stock?
Click to expand...
Click to collapse
I've been running Eclipse 2.1 for a while now with no issues... even if I was having a ROM issue... wouldn't still at least boot to the M logo or stock recovery?
Xeno62277 said:
I've been running Eclipse 2.1 for a while now with no issues... even if I was having a ROM issue... wouldn't still at least boot to the M logo or stock recovery?
Click to expand...
Click to collapse
Yes, it should. Or if you had bootstrap on there (which you should if you flashed stuff) it would boot into that if you turned the phone on when the phone was plugged in. Its really hard to say what it is when your phone simply died of low battery and now wont boot. I'm just as stumped as you right now since you pretty much tried everything I would have.
jsgraphicart said:
Yes, it should. Or if you had bootstrap on there (which you should if you flashed stuff) it would boot into that if you turned the phone on when the phone was plugged in. Its really hard to say what it is when your phone simply died of low battery and now wont boot. I'm just as stumped as you right now since you pretty much tried everything I would have.
Click to expand...
Click to collapse
Yeah when I said it booted to recovery I meant the bootstrap recovery. Since it won't boot I guess I don't have to worry about VZW finding out it was rooted... lol. Maybe I can get them to replace it.
Xeno62277 said:
Yeah when I said it booted to recovery I meant the bootstrap recovery. Since it won't boot I guess I don't have to worry about VZW finding out it was rooted... lol. Maybe I can get them to replace it.
Click to expand...
Click to collapse
Yeah, maybe you can get a replacement before they even know its rooted. lol. Just keep trying to boot it though. Maybe you'll get lucky.
Does your computer recognize the phone when you plug it in? You said the light comes on when its connected to your pc. If you can get adb running you can try to reboot the phone using adb.
Sent from my MB870 using xda premium
CadenH said:
Does your computer recognize the phone when you plug it in? You said the light comes on when its connected to your pc. If you can get adb running you can try to reboot the phone using adb.
Sent from my MB870 using xda premium
Click to expand...
Click to collapse
No, and it will not power on... just green light... which stays on even after disconnecting it from the usb.
I did some more googling and reading. Then came across the Factory style programming cable.
So you flashed your phone and now it thinks the battery is dead (even though it's not) and it won't let you flash it again to fix it? Or, your battery really is dead and you don't have a way to charge it because your phone is soft-bricked and won't charge the battery. What do you do?
With this cable you don't even need a battery in your phone. This is our clone of what is generally referred to as a Motorola "Factory Cable".
Unlike a normal USB cable these cables are wired in a way that compatible Motorola phones recognize as a "factory" programming cable. This allows the phone to power up and be flashed without having a battery in the phone. Depending upon the model of the phone, it may also boot up differently than it does with a normal USB cable.
Click to expand...
Click to collapse
Sounds like my problem exactly (minus the flashing part... which I did over a month ago). I went ahead and ordered it
Xeno62277 said:
I did some more googling and reading. Then came across the Factory style programming cable.
Sounds like my problem exactly (minus the flashing part... which I did over a month ago). I went ahead and ordered it
Click to expand...
Click to collapse
Cool. I hope this works out for you.
Xeno62277 said:
I did some more googling and reading. Then came across the Factory style programming cable.
Sounds like my problem exactly (minus the flashing part... which I did over a month ago). I went ahead and ordered it
Click to expand...
Click to collapse
Please let us know just for informational purposes. .
cyanogenmod
If you can get to bootstrap why not just use a card reader throw eclipse or some rom on your micro which should have come with an sd adaptor and just reflash from bootstrap?
Perpetual Void said:
If you can get to bootstrap why not just use a card reader throw eclipse or some rom on your micro which should have come with an sd adaptor and just reflash from bootstrap?
Click to expand...
Click to collapse
It won't power on at all... that's why I need the factory cable... it doesn't require a battery.
Well, I finally got that factory programming cable. That didn't power the phone on either... it did power on my fiancee's droid 2 with no battery in it though. I figured the phone was completely hosed (also noticed the battery bulging a bit), so I got a warranty replacement. Since I couldn't even get it to boot with the programming cable I have no doubt VZW will not waste any time trying to repair it... at least I hope that's what they will do.
If a lithium ion battery begins to bulge it can be dangerous if not replaced. This is rare but with these batteries if one were defective it could reach 1.5V per cell during use. This would render the battery unchangeable and its discharge would cause the copper plating to create a short circuit in the cellphone.
Sent from my MB870 using xda premium
S3AL3DF4T3 said:
If a lithium ion battery begins to bulge it can be dangerous if not replaced. This is rare but with these batteries if one were defective it could reach 1.5V per cell during use. This would render the battery unchangeable and its discharge would cause the copper plating to create a short circuit in the cellphone.
Sent from my MB870 using xda premium
Click to expand...
Click to collapse
Yeah I chucked that battery and got a new one. Thinking that's what killed my old phone.
The device is seems to be dead.
It just got a freeze and suddenly i couldn't turn it on.
No LED , not any response.
Only when i plug it to pc it shows a light green led.
I left it for hours without and with battery connected to original wall charger and NOTHING ! :crying:
Any help ?
Thanks..
try to get fully charged battery, turn in RSD mode and flash stock rom via RSD.
PakaPakaxz said:
The device is seems to be dead.
It just got a freeze and suddenly i couldn't turn it on.
No LED , not any response.
Only when i plug it to pc it shows a light green led.
I left it for hours without and with battery connected to original wall charger and NOTHING ! :crying:
Any help ?
Thanks..
Click to expand...
Click to collapse
Try pull the battery.
Conect your charge, and wait open screen, with Moto logos and no battery simbol.
Put battery in phone.
Waiting to charge.
Worked for me!
Sorry for english!
Atrix - "CM7"
ovitz said:
try to get fully charged battery, turn in RSD mode and flash stock rom via RSD.
Click to expand...
Click to collapse
The battery isn't empty for sure, about 40% .
I can't get into RSD mode ... the phone is dead.
clod007 said:
Try pull the battery.
Conect your charge, and wait open screen, with Moto logos and no battery simbol.
Put battery in phone.
Waiting to charge.
Worked for me!
Sorry for english!
Atrix - "CM7"
Click to expand...
Click to collapse
Did it, the result - nothing.
The phone just getting really hot and nothing is happened.
Is it dead ?
so, if you can see the green led you can flash your Atrix. Turn RSD first and then plug in your atrix with vol+ button, probably you will be able to run flash process with SBF file
Cant get AT&T RSD files
here you go, google won't hurt you
http://www.4shared.com/archive/viniGE9x/1ff-olympus-user-234-4591-1106.html
OK, i downloaded everything.
But i can't get the phone identified by RSD Lite on pc.
The phone just shows green led when it connected to PC and that's it.
Pushing the up\down volume key+power doesn't help....
Atrix is visiable in RSD n your PC?
NO
Buy an external battery charger. Charge battery then try again.
Sent from my Nexus 7 on official CM10
Why ? the phone should power up even without a battery when it connected to charger.
What can i do about this eBay seller that sold this wall charger with ATRIX and Defy in the item description ???
Only a refund?
He broke my atrix and my defy !
Dear All,
My Motorola Razr XT910 is not charging battery anymore.Whenever I insert charger,it shows only while light.I also try to charge it through Motorola Factory Cable.When I inserted Factory Cable,It boot up and battery shows ? in Battery Mark.I can use it till its connected through Factory Cable.It will shutdown immdiatly as soon as I remove factory Cable
Anyone can help me how to charge it in this situation.
Well it seems that your battery or charging module on the PCB went dead.
masaud said:
Dear All,
My Motorola Razr XT910 is not charging battery anymore.Whenever I insert charger,it shows only while light.I also try to charge it through Motorola Factory Cable.When I inserted Factory Cable,It boot up and battery shows ? in Battery Mark.I can use it till its connected through Factory Cable.It will shutdown immdiatly as soon as I remove factory Cable
Anyone can help me how to charge it in this situation.
Click to expand...
Click to collapse
factory cable doesnt charge it brings the phone back up just for to you unbrick it through rsd lite and flashing fastboot files. get it checked with a technician if possible
I have a rooted Droid RAZR (spyder) and I installed cyanogenmod on it. There was a gapps error and I deleted everything off of it. I didn't know the screen was on and just black so the battery drained. I have put it on the charger all night and it still holds a 10 second charge. I have the stock ROM on my desktop and I want to flash it via ADB. The problem is that it will not let me get into recovery mode then the sideboot thing. It just shuts off. Please help!!! I want to know what to do!
EDIT- When I plug it in, all it shows is the Motorola logo. It's been 4 minutes since I plugged it in the wall.
RAZR9312 said:
I have a rooted Droid RAZR (spyder) and I installed cyanogenmod on it. There was a gapps error and I deleted everything off of it. I didn't know the screen was on and just black so the battery drained. I have put it on the charger all night and it still holds a 10 second charge. I have the stock ROM on my desktop and I want to flash it via ADB. The problem is that it will not let me get into recovery mode then the sideboot thing. It just shuts off. Please help!!! I want to know what to do!
Click to expand...
Click to collapse
You say that it only holds a ten second charge, how have you determined that? You see the motorola symbol then nothing, or you are watching it shut itself down? You charged it with a wall charger correct?
So you cannot get in to stock recovery? Or you cannot get into custom recovery? This is a xt912 right?
Draxin said:
You say that it only holds a ten second charge, how have you determined that? You see the motorola symbol then nothing, or you are watching it shut itself down? You charged it with a wall charger correct?
So you cannot get in to stock recovery? Or you cannot get into custom recovery? This is a xt912 right?
Click to expand...
Click to collapse
It is approximate, the 10 seconds. When it is on a wall charger, all I see is the motorola logo. When connected to my PC, I see the Motorola logo, then nothing. A white (sort of) flash comes on, that is how I know it shuts off. I can get it in to stock, but not for long. I deleted the custom recovery when I deleted everything. This is a xt912.
RAZR9312 said:
It is approximate, the 10 seconds. When it is on a wall charger, all I see is the motorola logo. When connected to my PC, I see the Motorola logo, then nothing. A white (sort of) flash comes on, that is how I know it shuts off. I can get it in to stock, but not for long. I deleted the custom recovery when I deleted everything. This is a xt912.
Click to expand...
Click to collapse
At this point I would suggest you try to make sure it is off, and let it stay on the wall charger to charge for a couple of hours.
The motorola logo showing means that the bootloader is working but since you don't have anything for it to boot up, it can't do anything.
Download matlgrof's script utility for the xt912 while you are waiting for the phone to charge. If you can get the device to charge, use his utility to reflash fresh xt912 firmware and you will also be able to root it. then install safestrap 3.65 or 3.72 (whichever one you have.) If you had backups you will be able to restore them. The phone being charged is very very important with matlgrof's tool, if the battery goes dead while it is flashing, it will brick your phone.
If you can't get the phone to charge, then you will have to make/buy a motorola factory cable, and flash xt912 firmware via
RSD Lite.
Draxin said:
At this point I would suggest you try to make sure it is off, and let it stay on the wall charger to charge for a couple of hours.
The motorola logo showing means that the bootloader is working but since you don't have anything for it to boot up, it can't do anything.
Download matlgrof's script utility for the xt912 while you are waiting for the phone to charge. If you can get the device to charge, use his utility to reflash fresh xt912 firmware and you will also be able to root it. then install safestrap 3.65 or 3.72 (whichever one you have.) If you had backups you will be able to restore them. The phone being charged is very very important with matlgrof's tool, if the battery goes dead while it is flashing, it will brick your phone.
If you can't get the phone to charge, then you will have to make/buy a motorola factory cable, and flash xt912 firmware via
RSD Lite.
Click to expand...
Click to collapse
When I have it on the wall charger, the logo stays on. When I try the power+volume down it shows back up... will this have any effect on the battery?
RAZR9312 said:
When I have it on the wall charger, the logo stays on. When I try the power+volume down it shows back up... will this have any effect on the battery?
Click to expand...
Click to collapse
So, if the phone is off, and you plug it in, the logo comes on and stays on? Have you tried power volume down without the charger plugged in. My device always gets hinky if I am trying to access stock recovery with anything plugged into usb port, I have to access what I want, then plug the phone in.
Draxin said:
So, if the phone is off, and you plug it in, the logo comes on and stays on? Have you tried power volume down without the charger plugged in. My device always gets hinky if I am trying to access stock recovery with anything plugged into usb port, I have to access what I want, then plug the phone in.
Click to expand...
Click to collapse
When ever it is off and I plug it in it turns back on. Isn't there a charge-only mode?
RAZR9312 said:
When ever it is off and I plug it in it turns back on. Isn't there a charge-only mode?
Click to expand...
Click to collapse
Generally it should stay off. I guess try to leave it alone for a couple hours and see if it will charge. You are using a stock motorola data cable and not some cheap walmart one right?
Draxin said:
Generally it should stay off. I guess try to leave it alone for a couple hours and see if it will charge. You are using a stock motorola data cable and not some cheap walmart one right?
Click to expand...
Click to collapse
Yes... its the one that says Eco-Moto on it, Right?
RAZR9312 said:
Yes... its the one that says Eco-Moto on it, Right?
Click to expand...
Click to collapse
yes
Draxin said:
yes
Click to expand...
Click to collapse
When I was charging on my pc, there was a white light. Does this mean anything?
RAZR9312 said:
When I was charging on my pc, there was a white light. Does this mean anything?
Click to expand...
Click to collapse
Charge the phone with a PC will take forever to get a decent charge. You will have to do it with a wall outlet and a regular charger, and it will still take hours.
I had same issue. Just leave it charged for a good while. Then, while still plugged I into charger, he hold power+vol⬆+vol⬇. When menu pops up disconnect then connect it to computer via USB to run whatever recovery tool you choose. Also the white led is no big deal. Just get a good connection with the charger and let it charge for a while
Sent from my Nexus 7 using XDA Premium HD app