Disable Samsung BlockingMode Notification
*This module is meant for Samsung TouchWiz ROMs
It is an enable/disable module which prohibits the notification that appears when the Blocking Mode option is activated. It should be compatibile with all TouchWiz Roms.
Update v.2.0.0
You can see the new changelog below. It has been tested only on Note 4 therefore I prefer declare this new version as beta until I receive some feedbacks from users with other devices.
Download
Available on Xposed Repository
Source Code
It is open source. Available on GitHub
Changelog
Code:
[U]12/12/2014[/U]
Now you can choose between:
- never display the BlockingMode notification;
- display the notification only if BlockingMode is really active e.g. if you have set the time interval
[U]03/04/2014[/U]
- Added support for API 15 and 16
[U]03/02/2014[/U]
- Initial release
Let me know if you find out any problem.
when i try to run your apk i get an error..ive tried to download through xposed installer on my phone and from my pc and still get an error..i would love to get rid of the annoying blocking mode notification and have been waiting for this remedy .. im running a touchwiz based rom on 4.1.2 on a sprint gs3
sonnysonnyb said:
when i try to run your apk i get an error..ive tried to download through xposed installer on my phone and from my pc and still get an error..i would love to get rid of the annoying blocking mode notification and have been waiting for this remedy .. im running a touchwiz based rom on 4.1.2 on a sprint gs3
Click to expand...
Click to collapse
Could you please tell me the kind of error? Some logs or anything?
Thank you
sonnysonnyb said:
when i try to run your apk i get an error..ive tried to download through xposed installer on my phone and from my pc and still get an error..i would love to get rid of the annoying blocking mode notification and have been waiting for this remedy .. im running a touchwiz based rom on 4.1.2 on a sprint gs3
Click to expand...
Click to collapse
Ok got it. I'm using minSDK with API 17 (4.2).. I'm going to lower the API level and push an update on Xposed repo. Keep an eye on it and let me know if you solve your problem. :good:
im sorry i guess i ddnt explain the error very well...its not an error while running the module, its an error trying to install the apk..when i tried to install it through the exposed installer on the phone it said the apk was not compatible and wouldnt install and when i tried to install the apk i got from the repository here i got a parsing error ..hope this info helps id really like to use it.
sonnysonnyb said:
im sorry i guess i ddnt explain the error very well...its not an error while running the module, its an error trying to install the apk..when i tried to install it through the exposed installer on the phone it said the apk was not compatible and wouldnt install and when i tried to install the apk i got from the repository here i got a parsing error ..hope this info helps id really like to use it.
Click to expand...
Click to collapse
Yeah I understand.
Now there is versione 1.0.1 so try again and let me know
invano said:
Yeah I understand.
Now there is versione 1.0.1 so try again and let me know
Click to expand...
Click to collapse
beautiful..works like a charm..thank you
So freakin awesome! thanks.
Feature Request
invano said:
Disable Samsung BlockingMode Notification
*This module is meant for Samsung TouchWiz ROMs
It is an enable/disable module which prohibits the notification that appear when the Blocking Mode option is activated.
...
Let me know if you find out any problem.
Click to expand...
Click to collapse
Hi there!
Thanks for this useful module, the always-on BlockinMode notification is very annoying. However, it would be nice if the notification do appear when BlockingMode is activated so we could know when calls and messages will be silenced, just as happens in DnD Mode on iOS. Could you include a switch to enable this option and show the notification only when BlockMode is active? I usually turn it on while sleeping.
thank you again,
JF
JFCostta said:
Hi there!
Thanks for this useful module, the always-on BlockinMode notification is very annoying. However, it would be nice if the notification do appear when BlockingMode is activated so we could know when calls and messages will be silenced, just as happens in DnD Mode on iOS. Could you include a switch to enable this option and show the notification only when BlockMode is active? I usually turn it on while sleeping.
thank you again,
JF
Click to expand...
Click to collapse
Thank you for your suggestion.
I have developed the module with this "iOS-like" behavior and it works well.
I just want to implement a switch to preserve the old drastic functionality and I'll upload the new apk.
Disable BlockingMode Notification has been updated to v.2.
Please read the first post and let me know if you have issues!
Hi. Thanks for your work.
The option of completely remove the notification works, but the option of show only when active don't, it always show the notification.
My phone is a S2 international version (I9100).
Anyway to get this update to work on lollipop?
Doesn't work on S6 5.1.1
+1 Would love it if you could update to work with 5.1.1 on my Note 4! Ridiculous programming decision by Samsung to have it always show.....
Add support for marshmallow please!
HAKANN said:
Add support for marshmallow please!
Click to expand...
Click to collapse
+1
Hi, does this work on 5.0.x?
Thanks!
Any solution for 5.0? This or an alternative app? I've always used this one but i just jumped on Lollipop...
What does this app actually do..?
Related
This Xposed module can vibrate the phone on different call status. It should work on ICS to O phone apps.
Features:
1. Vibrate when an outgoing call is connected
2. Vibrate when an incoming call is connected
3. Vibrate when an incoming call is waiting
4. Vibrate when a call is ended
5. Vibrate during outgoing call at 45 second mark of every minute (default is off)
6. Vibrate once at fixed time after outgoing call is connected (default is off)
7. Any of the above features can be turned on/off
8. Vibration intensity can be adjusted
Requirements
1. Your phone must be rooted
2. Xposed framework must be installed first http://forum.xda-developers.com/showthread.php?t=1574401
3. Xposed library 2.2 is required
Instructions
Install the module
Run Xposed Installer and enable the module Vibrate on connected call, ended call and new call waiting for Android phones
Reboot the phone
Credits
kantry123 - for testing with Xperia U phone
Source code
You can find source code for this module from GitHub here.
Download
Xposed Module Repository
Change Log
Code:
3.20
- Fix the issue that settings are not applied for Nougat and higher devices
3.13
- Add support for Android 6
3.12
- Fix incorrect vibration time when Every Minute is selected on Lollipop
3.11
- Hangup vibration now works even when call is not connected on Lollipop
3.10
- Add support for call waiting on Lollipop
3.00
- Add support for Lollipop (including Xperia phones)
- Strongest vibration intensity is now 5
2.53
- Improved exception handling
2.52
- Update translation (Thanks to Jose Artuñedo for Spanish)
2.51
- Update translation (Thanks to Jan Žák for Czech)
2.50
- New feature to adjust state change threshold for outgoing call. Use it if your phone does not vibrate on outgoing call. Check FAQ below for details.
- New option to enable additional debug info
- Update translation
2.40
- New feature to adjust vibration intensity
- New localisation for Traditional Chinese for Hong Kong
2.31
- Updated localisation for Simplified Chinese (thanks to liveasx)
- New localisation for Traditional Chinese
2.30
- Second mark of every minute can now be changed
- New feature to vibrate once at fixed time after outgoing call is connected (default is off)
2.20
- New feature to vibrate the phone during outgoing call at 45 second mark of every minute (default is off)
- New localisation for Simplified Chinese (thanks to liveasx)
2.12
- Fix issue that vibrate on incoming call might not work on some phones
2.11
- Add new feature Vibrate when an incoming call is waiting
- Add new feature Vibrate when an incoming call is connected
- All features can be turned on/off
2.00
- Completely rewritten based on ICS/JB AOSP source code using CM ROM logic. Now should work on most Android phone apps.
1.11
- Added support for ICS ROM. Now should work with more Xperia phones.
FAQ
Q: My phone does not vibrate when an outgoing call is connected.
A: It's possible that the time of state change for your phone after an outgoing call is connected is slower than expected. This module has an assumption that this state change should happen in no longer than 200ms. In version 2.50, there's a new option to change this threshold. But first you need to know how much time your phone need. Following the procedures below:
1. First Enable Debug Info (new option available in 2.50 also) in setting.
2. Make some calls.
3. Check the Xposed log file under /data/data/de.robv.android.xposed.installer/log/.
4. Look for the line beginning with "cstate:ACTIVE". The value after "durationMillis" is the amount of time your phone needs for the state change for outgoing call. This value might varies so make several calls and mark the largest value.
5. Set the threshold to something higher than the largest value you found.
6. Try calling out again and see if it vibrates.
is there anyway to make this work with other phones that are on 4.2 builds ? or is this just exclusive to your sony model phone.
SystemErrorOne said:
is there anyway to make this work with other phones that are on 4.2 builds ? or is this just exclusive to your sony model phone.
Click to expand...
Click to collapse
I haven't checked out the source code for AOSP dialer. But if Xperia phone app is using similar code, then this module should also work in AOSP and other similar dialer.
Technically, this module only call the system vibrator after the method hideCallingProgress in the LargeCallView class. So if this class and method exist, then it mod should work.
You can try it and report back your result.
itandy said:
I haven't checked out the source code for AOSP dialer. But if Xperia phone app is using similar code, then this module should also work in AOSP and other similar dialer.
Technically, this module only call the system vibrator after the method hideCallingProgress in the LargeCallView class. So if this class and method exist, then it mod should work.
You can try it and report back your result.
Click to expand...
Click to collapse
Well considering that Im into designing and not so familiar with coding I will attempt to do it myself but feel free to give me a starting point
Thanks for the response :good:
SystemErrorOne said:
Well considering that Im into designing and not so familiar with coding I will attempt to do it myself but feel free to give me a starting point
Thanks for the response :good:
Click to expand...
Click to collapse
Actually you can check out the source code from GitHub if you want to know how this module works. It's just a few line of codes.
But again you can try this module to see if it works on your phone first. I have a feeling that it works too.
itandy said:
Actually you can check out the source code from GitHub if you want to know how this module works. It's just a few line of codes.
But again you can try this module to see if it works on your phone first. I have a feeling that it works too.
Click to expand...
Click to collapse
do you have a G+ account ?
SystemErrorOne said:
do you have a G+ account ?
Click to expand...
Click to collapse
Just PM
This did nothing, no effect on my Xperia T.
ironwick said:
This did nothing, no effect on my Xperia T.
Click to expand...
Click to collapse
Can you give me the link to download your ROM. I can take a look.
Can you make something for my xperia S with stock JB 4.1.2?
Regards
Hi
Well, does not work on Xperia mini pro (stock 4.0.4 rom).
Guys, please try out this version if the Play store version is not working for you. I checked some Xperia ICS ROM and found that a different method is called which is different from JB. Anyway, I made this version trying to support both methods. Please report your result. Thanks!
itandy said:
Guys, please try out this version if the Play store version is not working for you. I checked some Xperia ICS ROM and found that a different method is called which is different from JB. Anyway, I made this version trying to support both methods. Please report your result. Thanks!
Click to expand...
Click to collapse
2 downloads but no reply? Does the new version works?
itandy said:
2 downloads but no reply? Does the new version works?
Click to expand...
Click to collapse
nope bro... i replied to ur market comment but u did'nt respond
even the above version doesn't work on xperia U stock ics rom
even i tried on jb 4.1.2 not working
any other fix..!!!!
regards
kantry123
itandy said:
Guys, please try out this version if the Play store version is not working for you. I checked some Xperia ICS ROM and found that a different method is called which is different from JB. Anyway, I made this version trying to support both methods. Please report your result. Thanks!
Click to expand...
Click to collapse
Hi, I'll test it and will able to say it it works.
Bye.
kantry123 said:
nope bro... i replied to ur market comment but u did'nt respond
even the above version doesn't work on xperia U stock ics rom
even i tried on jb 4.1.2 not working
any other fix..!!!!
regards
kantry123
Click to expand...
Click to collapse
I downloaded this Xperia U ICS ROM. Is it what you're using? Can you also give me the link to your JB ROM?
itandy said:
I downloaded this Xperia U ICS ROM. Is it what you're using? Can you also give me the link to your JB ROM?
Click to expand...
Click to collapse
Stock rom ICS here is the link
jellybean rom link is here
(THE ABOVE JELLYBEAN ROM WAS MADE BY ME...ACTUALLY CUSTOM JELLYBEAN)
BUT STILL DOESN'T WORK AT ALL..!
REGARDS
kantry123
kantry123 said:
Stock rom ICS here is the link
jellybean rom link is here
(THE ABOVE JELLYBEAN ROM WAS MADE BY ME...ACTUALLY CUSTOM JELLYBEAN)
BUT STILL DOESN'T WORK AT ALL..!
REGARDS
kantry123
Click to expand...
Click to collapse
I've made a test build to write some debug info to the Xposed log. Can you install it, reboot the phone, try a call and wait until it's connected. Then send me the file from /data/xposed/debug.log. Thanks!
itandy said:
I've made a test build to write some debug info to the Xposed log. Can you install it, reboot the phone, try a call and wait until it's connected. Then send me the file from /data/xposed/debug.log. Thanks!
Click to expand...
Click to collapse
Here is the log file
Have a look..I did all ur mentioned steps above
https://app.box.com/s/mnxopqb7f67j2sh3slou
Pls...do have a look & reply
Sent from my ST25i using XDA Premium 4 mobile app
Various tweaks for Package Installer.
Description
Basic description: http://repo.xposed.info/module/com.pyler.xinstaller
Advanced description of app and all module features: http://pyler.wen.ru/XInstaller/Help.html
Translations
https://crowdin.com/project/xinstaller
For detailed description read description and changelogs in Xposed repo.
Thanks
- @GermainZ, @M66B, @hamzahrmalik, @rovo89, @MohammadAG, @caspase, @moneytoo and others who help me with coding
- translators, contributors
Contributions
Module is open source. Check it here:
https://github.com/pylerSM/XInstaller
Donate
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=6NTYA2HMPQHVW
DOWNLOAD:
http://repo.xposed.info/module/com.pyler.xinstaller
This goes without saying, but this module is a huge security risk if always enabled. After using it for whatever you want to use it for, disable it and reboot.
Sent from my HTC One_M8 using Tapatalk
Yes, it should not be always enabled. Enable it only when you need it.
What risks?
Thx, useful to switch between DEBUG and RELEASE builds :good:
A feature like 'enable for 1 minute' would be nice.
A simple ui with justa checkbox for the enabling/disabling of the module would bê a good adition.but not sure if it's possible
For what? You can enable or disable module in Xposed Installer.
pyler said:
For what? You can enable or disable module in Xposed Installer.
Click to expand...
Click to collapse
But after enabling /disabling you need to reboot, witch is the same as you unistalling the original apk and installing the New one with diferente signature
The only difference being you would keep the data
But it's only my personal opinion .
Yes, hm. It sounds well. I will do it.
RSDamasceno said:
What risks?
Click to expand...
Click to collapse
Someone who modifies a trusted app like Google play store with malicious codes can install it over the real app which has an encrypted signature
@pyler can we get gingerbread support plz?
v1.1:
Changes:
- added settings to control APK signature check (just click on module in Xposed Installer to launch module settings)
- support for android 2.3
pyler said:
v1.1:
Changes:
- added settings to control APK signature check (just click on module in Xposed Installer to launch module settings)
- support for android 2.3
Click to expand...
Click to collapse
Thank you for this module, but the setting in app is invalid, whenever I checked or unchecked the box in app, I must reboot device to make it work successfully, just like enable/disable this module in xposed installer then reboot.
Actually, I want to toggle this function easily, just bypass the annoying reboot process. It it technically possible?
This app screwed up something on my Nexus 5. I'm running CM11 and when I rebooted it showed basically what it did when I first installed the ROM. I used the TWRP file manager to delete the apk and everything went back to normal. Any ideas?
Sent from my Nexus 5 using Tapatalk
Same to me. Running this in my Galaxy S4 CM11 4.4.3 and after reboot I've "lost" all applications other than system ones. Then disabled xposed through recovery and got everything back but all Accounts section was lost.
Funny, but some time ago I made a similar module for development purposes (XDisableAppSignCheck on github).
This is very handy in development. But you should never use it in production! Especially on devices with important data.
This module gives me bootloops. Galaxy s3 cm 4.4.3
btw, removed setting because it doesnt work (can't work in initZygote) - v1.2
I dont know why it bootloops on CyanogenMod.. I tested it on stock Android 4.4.3 & TouchWiz 4.2.2 and all works. logs?
pyler said:
btw, removed setting because it doesnt work (can't work in initZygote) - v1.2
I dont know why it bootloops on CyanogenMod.. I tested it on stock Android 4.4.3 & TouchWiz 4.2.2 and all works. logs?
Click to expand...
Click to collapse
First time posting logs. Hopefully they're what you need. https://mega.co.nz/#!UEUGSZwY!D-SQ6U_GwP9ULxNV7k7rsFOvs1iRwpKQ4oXOh4DPAVY
Or https://www.dropbox.com/s/1mnsxynjyz2sro7/2014-06-17_00.50.zip
Sent from my GT-I9300 using Tapatalk 2
I've made this module after seeing this request http://forum.xda-developers.com/showpost.php?p=55570989 from a user asking to make a module to automatically add "*0# " (star zero hash space) to the front of a text message before it gets sent because some UK networks do not support delivery reports unless this code is at the start of the SMS and as a pretext (pun intended) to make a module to do some android internals hooking, I've done it.
It currently only works when you use the default android messaging app (com.android.mms), but as I told before it is a pretext to do some android internal hooking and soon will support any messaging (SMS) app.
Currently it has no configuration options, but as soon as I finish the internal hooks, it will have a preferences screen that will allow you to define the text to be inserted before and after the message body.
The initial public release version it's attached to the post, but the updates will follow only on the xposed repo.
Xposed Repo: http://repo.xposed.info/module/com.beatslayer.xposedmod.pretext
Changelog:
v0.1
- Initial Public Realease
v0.2
- Now supports all messaging (SMS) Apps
v0.3
- Configure text to inject before and after the messages body and separators.
v0.4
- New predefined text types to inject before and after the messages body.
Version Information
Status: Stable
Current Stable Version: 0.4
Stable Release Date: 30/03/2015
Created: 30/03/2015
Last Updated: 03/04/2015
Does anyone have a list of Network Operators that employ this design of requiring a prefix?
leemg said:
Does anyone have a list of Network Operators that employ this design of requiring a prefix?
Click to expand...
Click to collapse
According to this: http://www.reddit.com/r/AskUK/comments/2diyeo/do_you_use_text_message_delivery_reports/ it's only required for O2-based networks (i.e. O2, GiffGaff, Tesco Mobile), although that could be incorrect/outdated.
SifJar said:
According to this: http://www.reddit.com/r/AskUK/comments/2diyeo/do_you_use_text_message_delivery_reports/ it's only required for O2-based networks (i.e. O2, GiffGaff, Tesco Mobile), although that could be incorrect/outdated.
Click to expand...
Click to collapse
Well that's ME so thank you very much.
When I try to install this via Xposed it says Corrupt or Incompatible APK?
Are Intel processors supported?
Thanks
xda163fm said:
When I try to install this via Xposed it says Corrupt or Incompatible APK?
Are Intel processors supported?
Thanks
Click to expand...
Click to collapse
Which version of xposed you're running?
BTW new version uploaded to the Xposed Repo with configuration options that allows the user to select the text to insert before and after the messages body and custom separators.
I am using v58/54. Tried latest version and still says broke/incompatible. As I have an Intel processor in my phone when compiling the apk make sure that Intel is enabled as a target.
xda163fm said:
I am using v58/54. Tried latest version and still says broke/incompatible. As I have an Intel processor in my phone when compiling the apk make sure that Intel is enabled as a target.
Click to expand...
Click to collapse
I'm not using the NDK, it's just an module writen in java.
Which android version are you running?
Beat_Slayer said:
I'm not using the NDK, it's just an module writen in java.
Which android version are you running?
Click to expand...
Click to collapse
I am on v4.1.2. Still says "download is not a valid apk (or incompatible)". Very odd. I see it trying to download a 26kb file but it almost instantly fails with above error.
It's because you're on JB, I'll see if I can make it compatible.
New version uploaded to the repo with support for more android versions, and predefined text types.
Suggestions are welcome.
xda163fm said:
I am on v4.1.2. Still says "download is not a valid apk (or incompatible)". Very odd. I see it trying to download a 26kb file but it almost instantly fails with above error.
Click to expand...
Click to collapse
Can you please try the latest version and report if it's working now?
Not working on samsung I9300 4.3 stock. See link for xposed log.
https://docs.google.com/file/d/0B4vTiHTBB629TmFBZk90RUpNcXM/edit?usp=docslist_api
I've been after something like this for a while, please make it compatible!.
shivadow said:
Not working on samsung I9300 4.3 stock. See link for xposed log.
https://docs.google.com/file/d/0B4vTiHTBB629TmFBZk90RUpNcXM/edit?usp=docslist_api
I've been after something like this for a while, please make it compatible!.
Click to expand...
Click to collapse
I need the log after you send a message.
Now that's the thing, that WAS after sending texts with both modes.
Here is another log after the phone has been running for a while. This was logged right after sending texts in both modes : https://docs.google.com/file/d/0B4vTiHTBB629UFVqbk55S2Rfanc/edit?usp=docslist_api
Sent from a stolen phone!
Beat_Slayer said:
Can you please try the latest version and report if it's working now?
Click to expand...
Click to collapse
Now working on my 4.1.2. Thanks.
A few notes - the icon does not display in my draw (black space where it should be) and remember some providers charge for each delivery report so check.
Figured out that it's not working on samsung devices. I have an s3 mini I8200n on 4.2.2 and an s3 i9300 on 4.3. Both on o2uk.
Both seem to load the mod, both can send and receive messages but no delivery reports and no inserted text of any kind. Do you think a copy of the messaging app would help any?.
Sent from a stolen phone!
shivadow said:
Figured out that it's not working on samsung devices. I have an s3 mini I8200n on 4.2.2 and an s3 i9300 on 4.3. Both on o2uk.
Both seem to load the mod, both can send and receive messages but no delivery reports and no inserted text of any kind. Do you think a copy of the messaging app would help any?.
Sent from a stolen phone!
Click to expand...
Click to collapse
Just attach your stock messaging app, I'll make a workaround so that on Samsung it will work only on default messaging app.
Anyone else having issues, so I can address them on next version? :cyclops:
This is the stock message app for samsung 4.3 https://docs.google.com/file/d/0B4vTiHTBB629MGdfRk5wdnV6NlE/edit?usp=docslist_api
If there's anything else i can assist with just let me know!.
By the amount of time it has taken so far i presume you cannot make it compatible.
Please make it known that this mod is NOT compatible with all sms apps as you stated in your first post.
Thanks anyway.
Sent from a stolen phone!
Hi everybody! This thread is just to share my experience with the intention to help others who might benefit from this. I know there is a similar thread with the help of "FLOATIFICATIONS(FN)" app. But to my experience FN is a hit or miss on 5.1.1 and most of the time it does not work.
A little background....
Before coming to android 5.1.1 i was using PAC MAN ROM(KK-4.4.4). A great ROM. Among the cool features i liked most was that you have an option to open any notification in a floating window by long pressing it( yes Paranoid Android's "HOVER").But so far i did not find any lollipop 5.1.1 custom Rom which have this feature built into the Rom and XHALOFLOATINGWINDOW(Xposed Module) does not have this SystemUI mod for Android Lollipop(i think not even PA lollipop also so far). So after experimenting with many apps(including FN and Floatify and different sidebars)and mods, i have found a workaround which does exactly what i want and even better.
Things you will need:
1. Xposed installed (unofficial zip for 5.1.1 + official xposed installer alpha 4 apk)http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979
2. Xhalofloatingwindow v2.41( xposed module)http://forum.xda-developers.com/xpo...floatingwindow-v2-38-movable-t2419287/page299
3. Xbridge (xposed module)http://repo.xposed.info/module/daylemk.xposed.xbridge
3.Halo shortcuts( there are a couple of Halo shortcuts apps, anyone will do)http://forum.xda-developers.com/showthread.php?t=2554118
4.Notifications shortcuts.(https://play.google.com/store/apps/details?id=dk.nicolai.buch.andersen.ns&hl=en)
STEPS:
1. As usual install xposed and the two modules. Activate the modules and reboot.( you wont see any xbridge icon on app drawer)
2. Install Halo shortcuts. (you wont see any Halo shortcuts icon on your app drawer)
3. Install Notifications shortcuts(NS).
4.Open NS and tap on blank boxes(PREVIEW) to create shortcut. Now select the second option(shortcuts and contacts)>then select halo shortcut>select activity> xbridge>and select that only option under xbridge.
5.Now on your notification drawer u can see an droid icon. Tap to open it. And turn on the "View in Xhalo" switch.Thats It. We r good to go. Now long pressing any notification will show you an option to open in xhalo/floating window.
NOTE: you can pin any app or shortcuts this way to your Notification drawer and they will open in HALO mode anywhere.
CAUTION:Unfortunately on Android 5.1.1 xhalofloatingwindow may cause bootloops after you reboot. Solution: clear dalvik and cache. Its annoying to see this"OPTIMIZING APPS". But until the dev zst123(Xhalo) updates his fantastic module, this is the only way i think.
BIG THANKS TO: zst123(xhalo),romracer(xposed for 5.1.1), lj3lj3(xbridge), rovo89(xposed), MainstreamStereotype(halo shortcuts),and Nicolai Buch-Andersen(Notifications Shortcut)
Most user's use gravity box, I would recommend using the app launcher option to launch multi windows, the only downside is it only allows for 12 apps to be used
Sent from my Nexus 7 using Tapatalk
shadie21 said:
Most user's use gravity box, I would recommend using the app launcher option to launch multi windows, the only downside is it only allows for 12 apps to be used
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
.
Actually MANY users use custom Roms( derivatives of CM12/AOSP) instead of CM12 itself. And as per my experience most of the features available in Gravity Box are already there baked into those Roms. So in that situation(when you just need one or two features at most) i think its better to avoid Gravity Box(Its a combination of features in one single app).Apart from that Gravity Box LP is still a bit buggy and heavy. F.Y.K.I. i already tried Gravity Box LP and my conclusion is that my workaround is so far the easiest, practical and least resource consuming. The best thing is it integrates with lollipop notification system and gives me just what i wanted.
.................................Anyways....................thanks for your insight.
OPINIONS ARE INVITED............
[slow clap]
Thank you.
I have followed the steps but seems its not working. I'm on Slim saber rom 5.1.1 do you think can work on this?
Sent from my A0001 using Tapatalk
rolear8 said:
I have followed the steps but seems its not working. I'm on Slim saber rom 5.1.1 do you think can work on this?
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
It should work on any Rom. After flashing Xposed zip and xposed installer you should clear dalvik and cache. And after rebooting open the xposed app and go to framework and see if there is green message that xposed is active. Also, after activating Xhalo, go to the xhalo tesing tab and open setting or xposed in floating window. If the test result is successful then my procedure should definitely work.
Thank for @matesurano, the approach of open floating window in notification works fine (on my new buy Nexus 9 with latest stock rom of Android 5.1.1, buy in on hTC official Taiwan website, which has a great sale in the beginning of Aug)
I also try Gravity app launcher through hola-shortcut for some app, it's great, too.
Just want to report one thing about the bootloop:
It seems to be a gambling for the bootloop, no-matter you make wipe dalvik/cache or not, and the app optimization is annoying.
I try to make a xml backup of Xhola app with Titanium-> clean the data-> reboot with quick boot-> recovery the data of Xhola app with Titanium
I have made a 5 times straight boot without bootloop( and of cause no app optimization, don't need to wipe with TWRP)
I think it's worth to give a try with Titanium for bootlooping/app optimization.:fingers-crossed::fingers-crossed::laugh:
Can any body help I can get it to work with my rca maven pro its a 11.6 inch tablet its running android 5.0 it just opens one window at a time if I try to open another one the first one closes. Or I'm I using the wrong version of the tablet I'm using version 2.38 of xhalofloatingwindow
Th30n1 said:
Can any body help I can get it to work with my rca maven pro its a 11.6 inch tablet its running android 5.0 it just opens one window at a time if I try to open another one the first one closes. Or I'm I using the wrong version of the tablet I'm using version 2.38 of xhalofloatingwindow
Click to expand...
Click to collapse
Hi there, first u should test if xhalo is working in the xhalo test area. Also go through xhalo settings menu properly. As you are on android 5.0, u better try the version 2.41.
matesurano said:
Hi there, first u should test if xhalo is working in the xhalo test area. Also go through xhalo settings menu properly. As you are on android 5.0, u better try the version 2.41.
Click to expand...
Click to collapse
Thanks I will I notice that the test area work but if I exit the app and try to open more than 1 the first one closes. Update I was able to figure it out I have to be inside the xhalo app for me to be a ablw to open multiple apps at a time using multiwindow side launcher . also as my tablet doesn't have a working recovery like cwm or twrp I don't want to put something that can break it.
Not Working.....
Its not working in my redmi 2 with resurrection remix rom v5.5.8(based on 5.1.1)
I followed all the steps as your guide
But no luck
parthavluv said:
Its not working in my redmi 2 with resurrection remix rom v5.5.8(based on 5.1.1)
I followed all the steps as your guide
But no luck
Click to expand...
Click to collapse
Did you try opening xhalo window and inside of the app open multiplayer apps at once that's what I have to do on my rca maven pro. If I exit the app I can only open one app at a time
Th30n1 said:
Did you try opening xhalo window and inside of the app open multiplayer apps at once that's what I have to do on my rca maven pro. If I exit the app I can only open one app at a time
Click to expand...
Click to collapse
dev i do all the process...
but its not working all the way i want what should i do ??
parthavluv said:
Its not working in my redmi 2 with resurrection remix rom v5.5.8(based on 5.1.1)
I followed all the steps as your guide
But no luck
Click to expand...
Click to collapse
parthavluv said:
dev i do all the process...
but its not working all the way i want what should i do ??
Click to expand...
Click to collapse
When you try the test area can you at least open one app in floating window if you can have you try to install the fix for multiple windows on xposed.?
Thank you very much
facing long booting time is it normal ? and what do i do when in it
IZO6 said:
facing boot loop some times is it normal ? and what do i do when in boot loop.
Click to expand...
Click to collapse
the app doesnt work to good with lollipop never do a hard reboot this causes the bootloop always do soft rebots from xposed when enable thats what works for me. this module was updated to work with kitkat that was the last update that i know of.
why i select activity but didnt see xbridge？
Hi mates
Working on Oneplus Slimsaber 5.1.1
There is a new a Xhalo version for lollipop that seems works better
http://forum.xda-developers.com/showpost.php?p=64965531&postcount=3236
By the way @matesurano I had in my SGS2 rom the option to open the floating app swiping left the notification.
Do you know if it's possible with this method?
Thanks for this great tutorial
nachomagic said:
Hi mates
Working on Oneplus Slimsaber 5.1.1
There is a new a Xhalo version for lollipop that seems works better
http://forum.xda-developers.com/showpost.php?p=64965531&postcount=3236
By the way @matesurano I had in my SGS2 rom the option to open the floating app swiping left the notification.
Do you know if it's possible with this method?
Thanks for this great tutorial
Click to expand...
Click to collapse
Hi there! do u mean the stock rom or custom in SGS2?! Anyways.....as far as i know, systemUi mods(specially swiping or single tapping are not possible with xhalo in Lollipop. But, Blisspop lollipop(not in MM yet) roms have implemented exactly the same features i.e. u can open the headsup notification in floating window simply by tapping it once or long press the notification in notification tray and get an option to open it in floating window. All these without any xposed module. Quite neat indeed!
Basically this patch transform your stock android nougat into kinda Samsung Experience 8.1
DOWNLOAD: https://drive.google.com/file/d/1yGHi_MHlvpr6u7GZUN3SkQYGcGKDJAbX/view?usp=drivesdk
There is an extremely debloated, deodexed and deknoxed stock rom(Only 768MB).Samsung themes and NFC totally removed also.
DOWNLOAD:https://drive.google.com/file/d/1loir60cMkOu4B_TTRRfqgWKoOc_9yxLd/view?usp=drivesdk
Screenshots: https://imgur.com/a/EgTCM
Mega is asking for some unlock code... is this some type of spam ? If it's working how to install. Thnx
33r13 said:
This patch includes: bluid.prop tweaks; system apps with Samsung Experience 8.1 icons; floating_feature; fonts; framework;
Basically it makes your old nougat 7.0 user interface more fancy, but without any extra features that are not working like extra notifications toggles.
Download: https://mega.nz/#!0ug3RL5Q
If you don't have deodexed stock nougat, there is an extremely debloated, deodexed and deknoxed stock rom(Only 768MB).Samsung themes and NFC totally removed also.
Download: https://mega.nz/#!96pBwRDS
Click to expand...
Click to collapse
Where is the mega pass??
Godzilla Muzik said:
Mega is asking for some unlock code... is this some type of spam ? If it's working how to install. Thnx
Click to expand...
Click to collapse
Sorry for that.. link was without unlock code but it was asking for it.. idk why..
Anyway, I uploaded to google drive.
To install you need TWRP, just flash the first zip IF YOU ARE ON DEODEXED ROM.(on odexed you will get bootloop because of framework-res.apk. It's for power menu)
You can try the rom in second link. It's just the stock one but very debloated and some useless features(for me) like NFC and Samsung Themes removed.
I'll give it a try now [emoji3] [emoji3] [emoji3]
33r13 said:
This patch includes: bluid.prop tweaks; system apps with Samsung Experience 8.1 icons; floating_feature; fonts; framework;
Basically it makes your old nougat 7.0 user interface more fancy, but without any extra features that are not working like extra notifications toggles.
Download:https://drive.google.com/file/d/15_St3Q031mXDrCQhb4AryruF8ccC8aN_/view?usp=drivesdk
If you don't have deodexed stock nougat, there is an extremely debloated, deodexed and deknoxed stock rom(Only 768MB).Samsung themes and NFC totally removed also.
Download:https://drive.google.com/file/d/1loir60cMkOu4B_TTRRfqgWKoOc_9yxLd/view?usp=drivesdk
Click to expand...
Click to collapse
It seems fine, nice work !
Bugs:
- When in multiwindow they keyboard is not showing up
- Performance Mode is showing up in the notification tray and not working and useless
- One Handed mode is not working
- A Strange notification saying Samsung Account Session Expired
I Hope you can fix these bugs. I really like this patch !!!
Sent from my SM-A310F using XDA-Developers Legacy app
Thanks for feedback!
I'll try to modify floating_features.xml. I think that's why performance mode is showing up.
I'll put one handed mode back also.
I never had any samsung account notification, and didn't used multiwindow yet 'cause the screen is a bit too small for this in my opinion.
33r13 said:
Thanks for feedback!
I'll try to modify floating_features.xml. I think that's why performance mode is showing up.
I'll put one handed mode back also.
I never had any samsung account notification, and didn't used multiwindow yet 'cause the screen is a bit too small for this in my opinion.
Click to expand...
Click to collapse
I'll be ready to test it. I love the patch.
I think you can add "Samsungmultiwinodow.apk" in "System/priv-app" or completely get rid of it. It's present on the patch because of the framework. I'm excited to test it. Keep it up ?
Link updated.
Multiwindow added/Performance mode toggle removed/Added S9 sounds and new messaging app/Some system apps updated/Multiuser in quick settings added.
(Onehanded mode still not working)
33r13 said:
Link updated.
Multiwindow added/Performance mode toggle removed/Added S9 sounds and new messaging app/Some system apps updated/Multiuser in quick settings added.
(Onehanded mode still not working)
Click to expand...
Click to collapse
Thank You, Been waiting, i'll give it a try and give you feed back
33r13 said:
Link updated.
Multiwindow added/Performance mode toggle removed/Added S9 sounds and new messaging app/Some system apps updated/Multiuser in quick settings added.
(Onehanded mode still not working)
Click to expand...
Click to collapse
Nice, the multiwindow is the same... the phone reboots when the keyboard is active in multiwindow
everything else is fine. the multiwindow has something to do with the framework. you can simply disable it completely
I hope you still working on this patch.
Godzilla Muzik said:
Nice, the multiwindow is the same... the phone reboots when the keyboard is active in multiwindow
everything else is fine. the multiwindow has something to do with the framework. you can simply disable it completely
I hope you still working on this patch.
Click to expand...
Click to collapse
Yeah.. I tested it.
I'll see what I can do.. now my pc is broken and I don't think I can modify the framework only with my phone.
Three important questions...
Does it delete data?
Can I use it with stock recovery?
Is it safe to do?
Thanks if you reply
NewMoonWithFace said:
Does it delete data?
Can I use it with stock recovery?
Is it safe to do?
Thanks if you reply
Click to expand...
Click to collapse
It doesn't delete data but you need to flash it into TWRP.
Pagan_Serpent said:
It doesn't delete data but you need to flash it into TWRP.
Click to expand...
Click to collapse
Many thanks. I'll do it whenever my pc'll work again
Pagan_Serpent said:
It doesn't delete data but you need to flash it into TWRP.
Click to expand...
Click to collapse
Sorry for my ignorance, but I have 3 more questions... Is still looping on boot when I'm odexed? How can I check if my for is deodexed or not? If it isn't, how can I deodex?
Flashed over standard odexed nougat stock and... works like a charm
Thanks @33r13 for this cool release