I've made this module after seeing this request http://forum.xda-developers.com/showpost.php?p=55570989 from a user asking to make a module to automatically add "*0# " (star zero hash space) to the front of a text message before it gets sent because some UK networks do not support delivery reports unless this code is at the start of the SMS and as a pretext (pun intended) to make a module to do some android internals hooking, I've done it.
It currently only works when you use the default android messaging app (com.android.mms), but as I told before it is a pretext to do some android internal hooking and soon will support any messaging (SMS) app.
Currently it has no configuration options, but as soon as I finish the internal hooks, it will have a preferences screen that will allow you to define the text to be inserted before and after the message body.
The initial public release version it's attached to the post, but the updates will follow only on the xposed repo.
Xposed Repo: http://repo.xposed.info/module/com.beatslayer.xposedmod.pretext
Changelog:
v0.1
- Initial Public Realease
v0.2
- Now supports all messaging (SMS) Apps
v0.3
- Configure text to inject before and after the messages body and separators.
v0.4
- New predefined text types to inject before and after the messages body.
Version Information
Status: Stable
Current Stable Version: 0.4
Stable Release Date: 30/03/2015
Created: 30/03/2015
Last Updated: 03/04/2015
Does anyone have a list of Network Operators that employ this design of requiring a prefix?
leemg said:
Does anyone have a list of Network Operators that employ this design of requiring a prefix?
Click to expand...
Click to collapse
According to this: http://www.reddit.com/r/AskUK/comments/2diyeo/do_you_use_text_message_delivery_reports/ it's only required for O2-based networks (i.e. O2, GiffGaff, Tesco Mobile), although that could be incorrect/outdated.
SifJar said:
According to this: http://www.reddit.com/r/AskUK/comments/2diyeo/do_you_use_text_message_delivery_reports/ it's only required for O2-based networks (i.e. O2, GiffGaff, Tesco Mobile), although that could be incorrect/outdated.
Click to expand...
Click to collapse
Well that's ME so thank you very much.
When I try to install this via Xposed it says Corrupt or Incompatible APK?
Are Intel processors supported?
Thanks
xda163fm said:
When I try to install this via Xposed it says Corrupt or Incompatible APK?
Are Intel processors supported?
Thanks
Click to expand...
Click to collapse
Which version of xposed you're running?
BTW new version uploaded to the Xposed Repo with configuration options that allows the user to select the text to insert before and after the messages body and custom separators.
I am using v58/54. Tried latest version and still says broke/incompatible. As I have an Intel processor in my phone when compiling the apk make sure that Intel is enabled as a target.
xda163fm said:
I am using v58/54. Tried latest version and still says broke/incompatible. As I have an Intel processor in my phone when compiling the apk make sure that Intel is enabled as a target.
Click to expand...
Click to collapse
I'm not using the NDK, it's just an module writen in java.
Which android version are you running?
Beat_Slayer said:
I'm not using the NDK, it's just an module writen in java.
Which android version are you running?
Click to expand...
Click to collapse
I am on v4.1.2. Still says "download is not a valid apk (or incompatible)". Very odd. I see it trying to download a 26kb file but it almost instantly fails with above error.
It's because you're on JB, I'll see if I can make it compatible.
New version uploaded to the repo with support for more android versions, and predefined text types.
Suggestions are welcome.
xda163fm said:
I am on v4.1.2. Still says "download is not a valid apk (or incompatible)". Very odd. I see it trying to download a 26kb file but it almost instantly fails with above error.
Click to expand...
Click to collapse
Can you please try the latest version and report if it's working now?
Not working on samsung I9300 4.3 stock. See link for xposed log.
https://docs.google.com/file/d/0B4vTiHTBB629TmFBZk90RUpNcXM/edit?usp=docslist_api
I've been after something like this for a while, please make it compatible!.
shivadow said:
Not working on samsung I9300 4.3 stock. See link for xposed log.
https://docs.google.com/file/d/0B4vTiHTBB629TmFBZk90RUpNcXM/edit?usp=docslist_api
I've been after something like this for a while, please make it compatible!.
Click to expand...
Click to collapse
I need the log after you send a message.
Now that's the thing, that WAS after sending texts with both modes.
Here is another log after the phone has been running for a while. This was logged right after sending texts in both modes : https://docs.google.com/file/d/0B4vTiHTBB629UFVqbk55S2Rfanc/edit?usp=docslist_api
Sent from a stolen phone!
Beat_Slayer said:
Can you please try the latest version and report if it's working now?
Click to expand...
Click to collapse
Now working on my 4.1.2. Thanks.
A few notes - the icon does not display in my draw (black space where it should be) and remember some providers charge for each delivery report so check.
Figured out that it's not working on samsung devices. I have an s3 mini I8200n on 4.2.2 and an s3 i9300 on 4.3. Both on o2uk.
Both seem to load the mod, both can send and receive messages but no delivery reports and no inserted text of any kind. Do you think a copy of the messaging app would help any?.
Sent from a stolen phone!
shivadow said:
Figured out that it's not working on samsung devices. I have an s3 mini I8200n on 4.2.2 and an s3 i9300 on 4.3. Both on o2uk.
Both seem to load the mod, both can send and receive messages but no delivery reports and no inserted text of any kind. Do you think a copy of the messaging app would help any?.
Sent from a stolen phone!
Click to expand...
Click to collapse
Just attach your stock messaging app, I'll make a workaround so that on Samsung it will work only on default messaging app.
Anyone else having issues, so I can address them on next version? :cyclops:
This is the stock message app for samsung 4.3 https://docs.google.com/file/d/0B4vTiHTBB629MGdfRk5wdnV6NlE/edit?usp=docslist_api
If there's anything else i can assist with just let me know!.
By the amount of time it has taken so far i presume you cannot make it compatible.
Please make it known that this mod is NOT compatible with all sms apps as you stated in your first post.
Thanks anyway.
Sent from a stolen phone!
Related
Hi guys,
I'm about to pull the trigger on a nc, but need to have skyscape working for it to replace my current archos 101.
I have a link to the apk here, if someone could please install it and see if it runs.
Please also state which Rom you're using.
Cheers, thanks heaps in advance
Link: http://forum.xda-developers.com/attachment.php?attachmentid=510921&d=1297034453
(Tablet specific version)
Using it on the froyo flashable rom. No problems. Skyscape is the only reason I'm sticking with the froyo rom. Tried it with the CM7 rom but since no device ID is created with this rom, it won't work. The eclair roms won't work as the device ID is created randomly. Skyscape needs a stable fixed ID. I imagine the ID issue with gingerbread will be worked out in the future.
liqn7 said:
Hi guys,
I'm about to pull the trigger on a nc, but need to have skyscape working for it to replace my current archos 101.
I have a link to the apk here, if someone could please install it and see if it runs.
Please also state which Rom you're using.
Cheers, thanks heaps in advance
Link: http://forum.xda-developers.com/attachment.php?attachmentid=510921&d=1297034453
(Tablet specific version)
Click to expand...
Click to collapse
One more thing: When launching Skyscape, you HAVE to be connected via wifi. If not, it will give you the message that the device ID is different or your device is in airplane mode. But once the initial open with wifi enabled, you can use it with wifi off. If you ever reboot, always connect the first time with wifi enabled.
Thanks for the reply.
Have you tried the apk in my opening post?
I think its a tablet specific version as I'm able to use it on my 101 without wifi and without an id. The one from the market for example doesn't work.
Could you please try it and see if it makes a difference?
Cheers
liqn7 said:
Thanks for the reply.
Have you tried the apk in my opening post?
I think its a tablet specific version as I'm able to use it on my 101 without wifi and without an id. The one from the market for example doesn't work.
Could you please try it and see if it makes a difference?
Cheers
Click to expand...
Click to collapse
I believe this is the same version I was using. I installed the apk and my paid resources were locked out. It asked me to reinstall the paid resources, but I just am restoring my system instead. Maybe you don't need the wifi to connect for non-paid resources? Your 101 must be generating some ID. Go into the software and click "about." It should show your device ID.
I've just double checked - my archos does indeed generate a stable ID.
However, I do have paid databases on their at the moment and don't need Wi-fi access upon start up... I wonder whats happening?
Do you think they'll fix it in CM7?
Have you tried running Android ID changer (on the market) to set/spoof an android device ID?
I believe the ID problem has been fixed, first by framework patch, and now in the nightlies. The problem is serious enough that I would expect it to most definitely be resolved by the time the Stable release arrives.
liqn7 said:
I've just double checked - my archos does indeed generate a stable ID.
However, I do have paid databases on their at the moment and don't need Wi-fi access upon start up... I wonder whats happening?
Do you think they'll fix it in CM7?
Have you tried running Android ID changer (on the market) to set/spoof an android device ID?
Click to expand...
Click to collapse
I thought it might be giving the problem without wifi because of subscription resources. I bought a four month subscription, so I thought that might be the programs way of checking online first before launching the paid subscription resource. Not sure, though. CM7 does appear to generate a device ID.
My nook is arriving next week
Has anyone had a chance to test skyscape out on the latest CM7 nightlies?
Also you're saying that it doesn't run on rooted stock eclair?
liqn7 said:
My nook is arriving next week
Has anyone had a chance to test skyscape out on the latest CM7 nightlies?
Also you're saying that it doesn't run on rooted stock eclair?
Click to expand...
Click to collapse
I downloaded the app from the market, created an account. I downloaded the free resources that were available and all seems well. It runs on a full screen.
.Update.....
I did not really read the op very well at first. I uninstalled the market app and installed your apk. Logged into the account that I created and it loaded fine. Actually, instead of 3 resources available for download, I had seven or eight with this version. Looks like it works. This is a great medical database. I am running cm7 nightly 12.
Any way to make it full screen
Is there any way to view skyscape with full screen at nook color? since only a tiny screen appears as if it is in a 3.5inch smartphone
kosei_inoue said:
Is there any way to view skyscape with full screen at nook color? since only a tiny screen appears as if it is in a 3.5inch smartphone
Click to expand...
Click to collapse
Go to the spare parts app and the option to run older apps in compatability mode. If it is on, toogle off and reboot. If it is off, toggle on and reboot. One or the other sequence works.
Thanks for the update mate
Skyscape is the bomb...especially once you load a few databases on there
Really interested to see if anyone could please try it on autonooted stock 2.1 though, as CM7 while awesome is still not as stable as I'd like at the moment.
sec6 said:
Using it on the froyo flashable rom. No problems. Skyscape is the only reason I'm sticking with the froyo rom. Tried it with the CM7 rom but since no device ID is created with this rom, it won't work. The eclair roms won't work as the device ID is created randomly. Skyscape needs a stable fixed ID. I imagine the ID issue with gingerbread will be worked out in the future.
Click to expand...
Click to collapse
Is there any solution to get a fixed device ID in eclair- Im dying here!
sec6 said:
Using it on the froyo flashable rom. No problems. Skyscape is the only reason I'm sticking with the froyo rom. Tried it with the CM7 rom but since no device ID is created with this rom, it won't work. The eclair roms won't work as the device ID is created randomly. Skyscape needs a stable fixed ID. I imagine the ID issue with gingerbread will be worked out in the future.
Click to expand...
Click to collapse
Im now trying the froyo that runs off the sdcard but skyscape just crashes- logcat shows the error to be "cannot determine device identification"- I'm guessing my only option is to flash froyo?
EDIT- was using old version- working now!
Or CM7 as it looks to be more stable now
Arggh- just flashed froyo and still skyscape crashes on launch- logcat still lists error as "Cannot determine device identification"- what gives!!! any ideas?
EDIT- looks like I was using an old version- its running now
jimmyz said:
EDIT- looks like I was using an old version- its running now
Click to expand...
Click to collapse
Did you get your version from the market or from the apk I posted?
liqn7 said:
Did you get your version from the market or from the apk I posted?
Click to expand...
Click to collapse
from market- is there advantage with the one you posted?
jimmyz said:
from market- is there advantage with the one you posted?
Click to expand...
Click to collapse
Not sure. Mine is version 1.26. I used it previously as the one from the market didn't support tablets. They may have updated it now..not sure...
Today we finally see the release of DirecTV's free GenieGo app. hurray...
But wait... i cant use it on rooted devices??? Come on man...
I LOL at you for at least trying and gave me something to do for a few minutes.
if you already installed if from the Markert be sure to uninstall that one first other wise you will get a signature error
i was cleaning up some code and noticed that they also are checking more that just for su..
so that said, if your trying to install on CM or just want to remove that "device is rooted/ operation not avaible in releasebuild" or what ever that said toast on boot and a few other places here is an update. its better coding... (on my part)
geniego_2.apk - 9.30 MB
Host is having issues. Please try link above if it does not work here is mirror
Nice one!
So am I.
Edited ........
The link is broken, is there somewhere else I can download this from.
Thanks
diljosh said:
The link is broken, is there somewhere else I can download this from.
Thanks
Click to expand...
Click to collapse
Its not broke. Dev-host is just running slow today.
runandhide05 said:
Its not broke. Dev-host is just running slow today.
Click to expand...
Click to collapse
It worked, good job on the App
Thank you @thehobster
thank you
Nice Awesome & Fantastic Work! Much Thanks!
Just transfered the file from computer to phone and clicked on it to get prompt from the native android installer to complete the installation.
Thank You!
Sent from my SU SCH-I605 using xda app-developers app
runandhide05 said:
Today we finally see the release of DirecTV's free GenieGo app. hurray...
But wait... i cant use it on rooted devices??? Come on man...
I LOL at you for at least trying and gave me something to do for a few minutes.
if you already installed if from the Markert be sure to uninstall that one first other wise you will get a signature error
i was cleaning up some code and noticed that they also are checking more that just for su..
so that said, if your trying to install on CM or just want to remove that "device is rooted/ operation not avaible in releasebuild" or what ever that said toast on boot and a few other places here is an update. its better coding... (on my part)
geniego_2.apk - 9.30 MB
Host is having issues. Please try link above if it does not work here is a mirror.
Host is back up. Im keep an eye out and post a mirror if it happens again
Click to expand...
Click to collapse
Apparently there is an update to Geniego that allows devices to download content off-site. Has the Android app been changed? If so, will you be able to update your modification?
dfox123 said:
Apparently there is an update to Geniego that allows devices to
Click to expand...
Click to collapse
download its off site streaming not downloading
content off-site. Has the Android app been changed? If so, will you be able to update your modification?
Click to expand...
Click to collapse
OOH(out of home) streaming currently is only on pc and iphone, once the android app has been updated you bet il "fix" it also.
Works like a charm
Installed it on my S4 and it worked GREAT. Thanks for doing this. My tablet is not one of the one's listed in on the DirecTV web site as a certified device so I can't even download it. I decided to give this a try and it works great.
Many thanks.
Thanks brother your awesome. Installed on my s3 with wicked sensations rom... works perfectly :good:
Sent from my SGH-I747 using xda app-developers app
runandhide05 said:
download its off site streaming not downloading
OOH(out of home) streaming currently is only on pc and iphone, once the android app has been updated you bet il "fix" it also.
Click to expand...
Click to collapse
Thanks so much for the fix. Can't wait till they get the OOH streaming working, but cheers for at least making the app work on rooted android.
Yeah! Was about ready to ship the GenieGo back and let Directv know what I thought of the root check for their Android app. Works fine on my GS2 running the Jedi Mind Trick (JB2) ROM.
I requested a mod to be added to the modaco toolkit with the xposed framework
http://www.modaco.com/topic/361634-...r-xposed-framework/page__st__280#entry2144113
If Paul can add this to the toolkit, there is no need to modify the APK and we can keep the play store version installed.
plastikman187 said:
I requested a mod to be added to the modaco toolkit with the xposed framework
http://www.modaco.com/topic/361634-...r-xposed-framework/page__st__280#entry2144113
If Paul can add this to the toolkit, there is no need to modify the APK and we can keep the play store version installed.
Click to expand...
Click to collapse
It takes me two minutes to remove the root and custom rom check (as well as the other things that they check before allowing end user to use the app)
Sure he could do that, but he would have to update his code everytime the app is updated as well. (Package names change, app dev "attempting" to preform checks other ways therefore changing the code and so forth are many reasons I wouldnt think he would bother)
If you have a precaution about running an app that someone (in this case me) has modified (for any reason ) and you want to use the original application you know u can "hide root" with many third party apps, and its even possible with supersu. This way would allow you to use un altered app.
To recap, I have no problem with any additional solutions to reach the same end result. There are many ways to get the same result.
Cheers
runandhide05 said:
It takes me two minutes to remove the root and custom rom check (as well as the other things that they check before allowing end user to use the app)
Sure he could do that, but he would have to update his code everytime the app is updated as well. (Package names change, app dev "attempting" to preform checks other ways therefore changing the code and so forth are many reasons I wouldnt think he would bother)
If you have a precaution about running an app that someone (in this case me) has modified (for any reason ) and you want to use the original application you know u can "hide root" with many third party apps, and its even possible with supersu. This way would allow you to use un altered app.
To recap, I have no problem with any additional solutions to reach the same end result. There are many ways to get the same result.
Cheers
Click to expand...
Click to collapse
Since my Nexus 10 updated to Android 4.3, this app doesn't run. I get error code AR/1001. Can you fix this also?
dfox123 said:
Since my Nexus 10 updated to Android 4.3, this app doesn't run. I get error code AR/1001. Can you fix this also?
Click to expand...
Click to collapse
4.3 broke a lot of apps...
That said, from a clean reboot ( simply for less cluter) run a logcat and launch app grab the failure and send it to me.
Edit:
After some quick googling thats not an app or os problem but something on "thier" side of things.
Google " error code AR/1001" and you'll find what I found .
This Xposed module can vibrate the phone on different call status. It should work on ICS to O phone apps.
Features:
1. Vibrate when an outgoing call is connected
2. Vibrate when an incoming call is connected
3. Vibrate when an incoming call is waiting
4. Vibrate when a call is ended
5. Vibrate during outgoing call at 45 second mark of every minute (default is off)
6. Vibrate once at fixed time after outgoing call is connected (default is off)
7. Any of the above features can be turned on/off
8. Vibration intensity can be adjusted
Requirements
1. Your phone must be rooted
2. Xposed framework must be installed first http://forum.xda-developers.com/showthread.php?t=1574401
3. Xposed library 2.2 is required
Instructions
Install the module
Run Xposed Installer and enable the module Vibrate on connected call, ended call and new call waiting for Android phones
Reboot the phone
Credits
kantry123 - for testing with Xperia U phone
Source code
You can find source code for this module from GitHub here.
Download
Xposed Module Repository
Change Log
Code:
3.20
- Fix the issue that settings are not applied for Nougat and higher devices
3.13
- Add support for Android 6
3.12
- Fix incorrect vibration time when Every Minute is selected on Lollipop
3.11
- Hangup vibration now works even when call is not connected on Lollipop
3.10
- Add support for call waiting on Lollipop
3.00
- Add support for Lollipop (including Xperia phones)
- Strongest vibration intensity is now 5
2.53
- Improved exception handling
2.52
- Update translation (Thanks to Jose Artuñedo for Spanish)
2.51
- Update translation (Thanks to Jan Žák for Czech)
2.50
- New feature to adjust state change threshold for outgoing call. Use it if your phone does not vibrate on outgoing call. Check FAQ below for details.
- New option to enable additional debug info
- Update translation
2.40
- New feature to adjust vibration intensity
- New localisation for Traditional Chinese for Hong Kong
2.31
- Updated localisation for Simplified Chinese (thanks to liveasx)
- New localisation for Traditional Chinese
2.30
- Second mark of every minute can now be changed
- New feature to vibrate once at fixed time after outgoing call is connected (default is off)
2.20
- New feature to vibrate the phone during outgoing call at 45 second mark of every minute (default is off)
- New localisation for Simplified Chinese (thanks to liveasx)
2.12
- Fix issue that vibrate on incoming call might not work on some phones
2.11
- Add new feature Vibrate when an incoming call is waiting
- Add new feature Vibrate when an incoming call is connected
- All features can be turned on/off
2.00
- Completely rewritten based on ICS/JB AOSP source code using CM ROM logic. Now should work on most Android phone apps.
1.11
- Added support for ICS ROM. Now should work with more Xperia phones.
FAQ
Q: My phone does not vibrate when an outgoing call is connected.
A: It's possible that the time of state change for your phone after an outgoing call is connected is slower than expected. This module has an assumption that this state change should happen in no longer than 200ms. In version 2.50, there's a new option to change this threshold. But first you need to know how much time your phone need. Following the procedures below:
1. First Enable Debug Info (new option available in 2.50 also) in setting.
2. Make some calls.
3. Check the Xposed log file under /data/data/de.robv.android.xposed.installer/log/.
4. Look for the line beginning with "cstate:ACTIVE". The value after "durationMillis" is the amount of time your phone needs for the state change for outgoing call. This value might varies so make several calls and mark the largest value.
5. Set the threshold to something higher than the largest value you found.
6. Try calling out again and see if it vibrates.
is there anyway to make this work with other phones that are on 4.2 builds ? or is this just exclusive to your sony model phone.
SystemErrorOne said:
is there anyway to make this work with other phones that are on 4.2 builds ? or is this just exclusive to your sony model phone.
Click to expand...
Click to collapse
I haven't checked out the source code for AOSP dialer. But if Xperia phone app is using similar code, then this module should also work in AOSP and other similar dialer.
Technically, this module only call the system vibrator after the method hideCallingProgress in the LargeCallView class. So if this class and method exist, then it mod should work.
You can try it and report back your result.
itandy said:
I haven't checked out the source code for AOSP dialer. But if Xperia phone app is using similar code, then this module should also work in AOSP and other similar dialer.
Technically, this module only call the system vibrator after the method hideCallingProgress in the LargeCallView class. So if this class and method exist, then it mod should work.
You can try it and report back your result.
Click to expand...
Click to collapse
Well considering that Im into designing and not so familiar with coding I will attempt to do it myself but feel free to give me a starting point
Thanks for the response :good:
SystemErrorOne said:
Well considering that Im into designing and not so familiar with coding I will attempt to do it myself but feel free to give me a starting point
Thanks for the response :good:
Click to expand...
Click to collapse
Actually you can check out the source code from GitHub if you want to know how this module works. It's just a few line of codes.
But again you can try this module to see if it works on your phone first. I have a feeling that it works too.
itandy said:
Actually you can check out the source code from GitHub if you want to know how this module works. It's just a few line of codes.
But again you can try this module to see if it works on your phone first. I have a feeling that it works too.
Click to expand...
Click to collapse
do you have a G+ account ?
SystemErrorOne said:
do you have a G+ account ?
Click to expand...
Click to collapse
Just PM
This did nothing, no effect on my Xperia T.
ironwick said:
This did nothing, no effect on my Xperia T.
Click to expand...
Click to collapse
Can you give me the link to download your ROM. I can take a look.
Can you make something for my xperia S with stock JB 4.1.2?
Regards
Hi
Well, does not work on Xperia mini pro (stock 4.0.4 rom).
Guys, please try out this version if the Play store version is not working for you. I checked some Xperia ICS ROM and found that a different method is called which is different from JB. Anyway, I made this version trying to support both methods. Please report your result. Thanks!
itandy said:
Guys, please try out this version if the Play store version is not working for you. I checked some Xperia ICS ROM and found that a different method is called which is different from JB. Anyway, I made this version trying to support both methods. Please report your result. Thanks!
Click to expand...
Click to collapse
2 downloads but no reply? Does the new version works?
itandy said:
2 downloads but no reply? Does the new version works?
Click to expand...
Click to collapse
nope bro... i replied to ur market comment but u did'nt respond
even the above version doesn't work on xperia U stock ics rom
even i tried on jb 4.1.2 not working
any other fix..!!!!
regards
kantry123
itandy said:
Guys, please try out this version if the Play store version is not working for you. I checked some Xperia ICS ROM and found that a different method is called which is different from JB. Anyway, I made this version trying to support both methods. Please report your result. Thanks!
Click to expand...
Click to collapse
Hi, I'll test it and will able to say it it works.
Bye.
kantry123 said:
nope bro... i replied to ur market comment but u did'nt respond
even the above version doesn't work on xperia U stock ics rom
even i tried on jb 4.1.2 not working
any other fix..!!!!
regards
kantry123
Click to expand...
Click to collapse
I downloaded this Xperia U ICS ROM. Is it what you're using? Can you also give me the link to your JB ROM?
itandy said:
I downloaded this Xperia U ICS ROM. Is it what you're using? Can you also give me the link to your JB ROM?
Click to expand...
Click to collapse
Stock rom ICS here is the link
jellybean rom link is here
(THE ABOVE JELLYBEAN ROM WAS MADE BY ME...ACTUALLY CUSTOM JELLYBEAN)
BUT STILL DOESN'T WORK AT ALL..!
REGARDS
kantry123
kantry123 said:
Stock rom ICS here is the link
jellybean rom link is here
(THE ABOVE JELLYBEAN ROM WAS MADE BY ME...ACTUALLY CUSTOM JELLYBEAN)
BUT STILL DOESN'T WORK AT ALL..!
REGARDS
kantry123
Click to expand...
Click to collapse
I've made a test build to write some debug info to the Xposed log. Can you install it, reboot the phone, try a call and wait until it's connected. Then send me the file from /data/xposed/debug.log. Thanks!
itandy said:
I've made a test build to write some debug info to the Xposed log. Can you install it, reboot the phone, try a call and wait until it's connected. Then send me the file from /data/xposed/debug.log. Thanks!
Click to expand...
Click to collapse
Here is the log file
Have a look..I did all ur mentioned steps above
https://app.box.com/s/mnxopqb7f67j2sh3slou
Pls...do have a look & reply
Sent from my ST25i using XDA Premium 4 mobile app
Disable Samsung BlockingMode Notification
*This module is meant for Samsung TouchWiz ROMs
It is an enable/disable module which prohibits the notification that appears when the Blocking Mode option is activated. It should be compatibile with all TouchWiz Roms.
Update v.2.0.0
You can see the new changelog below. It has been tested only on Note 4 therefore I prefer declare this new version as beta until I receive some feedbacks from users with other devices.
Download
Available on Xposed Repository
Source Code
It is open source. Available on GitHub
Changelog
Code:
[U]12/12/2014[/U]
Now you can choose between:
- never display the BlockingMode notification;
- display the notification only if BlockingMode is really active e.g. if you have set the time interval
[U]03/04/2014[/U]
- Added support for API 15 and 16
[U]03/02/2014[/U]
- Initial release
Let me know if you find out any problem.
when i try to run your apk i get an error..ive tried to download through xposed installer on my phone and from my pc and still get an error..i would love to get rid of the annoying blocking mode notification and have been waiting for this remedy .. im running a touchwiz based rom on 4.1.2 on a sprint gs3
sonnysonnyb said:
when i try to run your apk i get an error..ive tried to download through xposed installer on my phone and from my pc and still get an error..i would love to get rid of the annoying blocking mode notification and have been waiting for this remedy .. im running a touchwiz based rom on 4.1.2 on a sprint gs3
Click to expand...
Click to collapse
Could you please tell me the kind of error? Some logs or anything?
Thank you
sonnysonnyb said:
when i try to run your apk i get an error..ive tried to download through xposed installer on my phone and from my pc and still get an error..i would love to get rid of the annoying blocking mode notification and have been waiting for this remedy .. im running a touchwiz based rom on 4.1.2 on a sprint gs3
Click to expand...
Click to collapse
Ok got it. I'm using minSDK with API 17 (4.2).. I'm going to lower the API level and push an update on Xposed repo. Keep an eye on it and let me know if you solve your problem. :good:
im sorry i guess i ddnt explain the error very well...its not an error while running the module, its an error trying to install the apk..when i tried to install it through the exposed installer on the phone it said the apk was not compatible and wouldnt install and when i tried to install the apk i got from the repository here i got a parsing error ..hope this info helps id really like to use it.
sonnysonnyb said:
im sorry i guess i ddnt explain the error very well...its not an error while running the module, its an error trying to install the apk..when i tried to install it through the exposed installer on the phone it said the apk was not compatible and wouldnt install and when i tried to install the apk i got from the repository here i got a parsing error ..hope this info helps id really like to use it.
Click to expand...
Click to collapse
Yeah I understand.
Now there is versione 1.0.1 so try again and let me know
invano said:
Yeah I understand.
Now there is versione 1.0.1 so try again and let me know
Click to expand...
Click to collapse
beautiful..works like a charm..thank you
So freakin awesome! thanks.
Feature Request
invano said:
Disable Samsung BlockingMode Notification
*This module is meant for Samsung TouchWiz ROMs
It is an enable/disable module which prohibits the notification that appear when the Blocking Mode option is activated.
...
Let me know if you find out any problem.
Click to expand...
Click to collapse
Hi there!
Thanks for this useful module, the always-on BlockinMode notification is very annoying. However, it would be nice if the notification do appear when BlockingMode is activated so we could know when calls and messages will be silenced, just as happens in DnD Mode on iOS. Could you include a switch to enable this option and show the notification only when BlockMode is active? I usually turn it on while sleeping.
thank you again,
JF
JFCostta said:
Hi there!
Thanks for this useful module, the always-on BlockinMode notification is very annoying. However, it would be nice if the notification do appear when BlockingMode is activated so we could know when calls and messages will be silenced, just as happens in DnD Mode on iOS. Could you include a switch to enable this option and show the notification only when BlockMode is active? I usually turn it on while sleeping.
thank you again,
JF
Click to expand...
Click to collapse
Thank you for your suggestion.
I have developed the module with this "iOS-like" behavior and it works well.
I just want to implement a switch to preserve the old drastic functionality and I'll upload the new apk.
Disable BlockingMode Notification has been updated to v.2.
Please read the first post and let me know if you have issues!
Hi. Thanks for your work.
The option of completely remove the notification works, but the option of show only when active don't, it always show the notification.
My phone is a S2 international version (I9100).
Anyway to get this update to work on lollipop?
Doesn't work on S6 5.1.1
+1 Would love it if you could update to work with 5.1.1 on my Note 4! Ridiculous programming decision by Samsung to have it always show.....
Add support for marshmallow please!
HAKANN said:
Add support for marshmallow please!
Click to expand...
Click to collapse
+1
Hi, does this work on 5.0.x?
Thanks!
Any solution for 5.0? This or an alternative app? I've always used this one but i just jumped on Lollipop...
What does this app actually do..?
This is a simple mod to fill request by @AquilaChill located here. It's an adaptation of the original mod done by @Mr.Its located here and also by @MassiveEffect located here.
It spoofs the version number that the app sends to Micro$oft's servers. The app has a preference screen, which is located in Xposed Installer->Modules (no launcher icon per request).
Make sure you have your preferred version of Skype installed first, then launch the module preferences at least once.
It should work with older (<= 3.x) and newer versions (>= 4.x) of the Skype app. Once you change the spoofed version, make sure you fully exit Skype (kill app) before restarting it.
Also available in the Xposed Repo
You'll need to have the Xposed Framework installed and working for this module to do anything.
Changelog
v1.0 - Initial release
v1.1 - Reworded preferences to add clarification to module intent
Added support for dual Skype installations in preferences
Added module icon for preference screen
v1.2 - Fixed dual app support
v1.2.1 - Added support for older Skype app (<= 2.x)
It appears that Microsoft has changed how it gets an authenticated session. @PiggyFlooper has figured out how to get older versions of Skype working with the help of Titanium Backup and this module:
PiggyFlooper said:
Got Skype inverted 4.0.0....modded by theo0so to work with module v.1_2_1 on ics 4.0.3!
Used custom version in skypeX as current version 5.0.0.52727
Downloaded Skype from Play Store.
I'm not sure if this had anything to do with it, but, in Xprivacy, blocked /proc, serial, and getString in ID, and getDeviceid in Phone. -- (XPrivacy may not be needed per @nardeeno here)
Opened Skype and signed in. Backed up Skype with Titanium B.
Uninstalled Skype, reinstalled inverted version. Restored Skype data only in T.B.
Opened Skype and puh pow!
Click to expand...
Click to collapse
agentdr8 said:
This is a simple mod to fill request by @AquilaChill located here. It's an adaptation of the original mod done by @theos0o located here.
It spoofs the version number that the app sends to Micro$oft's servers. The app has a preference screen, which is located in Xposed Installer->Modules (no launcher icon per request).
It should work with older (<= 3.x) and newer versions (>= 4.x) of the Skype app. Once you change the spoofed version, make sure you fully exit Skype (kill app) before restarting it.
Also available in the Xposed Repo
Click to expand...
Click to collapse
What advantages if any are there to using an older version of the Skype Android application?
thanhdoku said:
What advantages if any are there to using an older version of the Skype Android application?
Click to expand...
Click to collapse
There are modded dark versions of older Skype versions and they're not as annoying as the newest version.
Also there is still non dark version of the newest Skype version.
I love modules like this but I gotta say that the latest version of Skype works the best. It got best battery, push so messages almost always gets delivered and it syncs messages when logging in fast and seamless. You can even greenify skype while logged in and you will receive messages anyway due to push. Means absolute minimum battery/memory usage
After I installed Skype 3.2 and Skype X module, I try to connect, but " You cannot to sign at this time. Try yor settings connection bla bla bla ..." Why ?
cristicaras said:
After I installed Skype 3.2 and Skype X module, I try to connect, but " You cannot to sign at this time. Try yor settings connection bla bla bla ..." Why ?
Click to expand...
Click to collapse
Are you using a Microsoft login by chance? I ran into this when I was testing on the older versions, and it only let me connect if I used a Skype login.
agentdr8 said:
Are you using a Microsoft login by chance? I ran into this when I was testing on the older versions, and it only let me connect if I used a Skype login.
Click to expand...
Click to collapse
No, I used my Skype acount.
cristicaras said:
No, I used my Skype acount.
Click to expand...
Click to collapse
What version did you spoof? I tested Skype v3.2.x using the 5.0.x spoof and it let me login using the Skype account.
Also, did you run the mod preferences at least once after Skype was installed? It needs to grab the installed version and write it to the preferences file in order for the module to work.
agentdr8 said:
What version did you spoof? I tested Skype v3.2.x using the 5.0.x spoof and it let me login using the Skype account.
Also, did you run the mod preferences at least once after Skype was installed? It needs to grab the installed version and write it to the preferences file in order for the module to work.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=42426671&postcount=2941&nocache=1&z=8957994726952165
I try v.19.1 inverted ,with Microsoft acount, I select 3.2.0.06673 in Skype X module, but I can't sign in.0
cristicaras said:
http://forum.xda-developers.com/showpost.php?p=42426671&postcount=2941&nocache=1&z=8957994726952165
I try v.19.1 inverted ,with Microsoft acount, I select 3.2.0.06673 in Skype X module, but I can't sign in.0
Click to expand...
Click to collapse
Try using 5.0.0.49715 as the spoofed version.
Thank you
Thank you for making this, but seems have some things to debug, I'll send you a link of my whole xposed log
Tested on 4.0.0.17847 v20b inverted & not working, according to logs it seems to think I'm on skype <== 3 & throws some java errors after that, on my stock rooted TW 4.2.2 MF9 SGS4 SPH-L720.
But I'd like to point out that theos0o didn't spoof anything (other people posted spoofed versions of his great mod), theos0o moded skype to do things like video chat on more devices, selectable notification sounds, bluetooth tweaks & other nice things.
In the app its not clear whether to select the version your trying to spoof (installed) or what your trying to spoof it as (newer version that MS allows to connect).
AquilaChill said:
Thank you for making this, but seems have some things to debug, I'll send you a link of my whole xposed log
Tested on 4.0.0.17847 v20b inverted & not working, according to logs it seems to think I'm on skype <== 3 & throws some java errors after that, on my stock rooted TW 4.2.2 MF9 SGS4 SPH-L720.
But I'd like to point out that theos0o didn't spoof anything (other people posted spoofed versions of his great mod), theos0o moded skype to do things like video chat on more devices, selectable notification sounds, bluetooth tweaks & other nice things.
In the app its not clear whether to select the version your trying to spoof (installed) or what your trying to spoof it as (newer version that MS allows to connect).
Click to expand...
Click to collapse
It's possible that particular version of the Skype app uses a different getVersion() method (or d() method in the old <= 3.x).
I can add clarification to the preferences so that it's clearer regarding what exactly the module will do.
I try to keep 2 versions simultaneus. Latest version,for Wifi,and v.19.1,for 3G connection. For that I modified 19.1 package name in Androidmanifest.xml (com.skype_mod.ryder).That is the reason for I can't sign in,but in other device,only Skype 19.1,with your Skype X module,work fine. Thank you sir for your great work. It is possible keep two Skype versions in same device ? Skype 19.1 is more smooth for 3G connection. Thank you again, and sorry for my poor english. I'm romanian. Best regards.
cristicaras said:
I try to keep 2 versions simultaneus. Latest version,for Wifi,and v.19.1,for 3G connection. For that I modified 19.1 package name in Androidmanifest.xml (com.skype_mod.ryder).That is the reason for I can't sign in,but in other device,only Skype 19.1,with your Skype X module,work fine. Thank you sir for your great work. It is possible keep two Skype versions in same device ? Skype 19.1 is more smooth for 3G connection. Thank you again, and sorry for my poor english. I'm romanian. Best regards.
Click to expand...
Click to collapse
I can add a preference to allow you to type in a custom package name that you've altered in the manifest. Then it would apply the spoofed version to both the official com.skype.raider and com.skype_mod.ryder package.
AquilaChill said:
Tested on 4.0.0.17847 v20b inverted & not working, according to logs it seems to think I'm on skype <== 3 & throws some java errors after that, on my stock rooted TW 4.2.2 MF9 SGS4 SPH-L720.
Click to expand...
Click to collapse
I got your logs and downloaded the inverted v20 from theos0o's thread. When I tested it with the module, my log shows:
Code:
[2014-08-29 09:44:40] SkypeX: Installed Skype version is >= 4
[2014-08-29 09:44:40] SkypeX: setting version to 5.0.0.49715
And proceeds to log me in using my Skype login. Did you at some point have a 3.x version installed prior to the 4.x version? Try clearing data for the SkypeX module, which will wipe the preferences file. Open the module prefs and reselect your settings. Then try your Skype 4.0.0.17847 and see if it works.
Your preferences file located at /data/data/com.dr8.xposed.skypex/shared_prefs should resemble the following:
Code:
<?xml version='1.0' encoding='utf-8' standalone='yes' ?>
<map>
<string name="skypever">4.0.0.17847</string>
<string name="manual_version"></string>
<string name="version">5.0.0.49715</string>
<boolean name="debug" value="true" />
</map>
agentdr8 said:
I can add a preference to allow you to type in a custom package name that you've altered in the manifest. Then it would apply the spoofed version to both the official com.skype.raider and com.skype_mod.ryder package.
Click to expand...
Click to collapse
Oooo !!! Thank you in advance. You are the best !
cristicaras said:
Oooo !!! Thank you in advance. You are the best !
Click to expand...
Click to collapse
Give the latest version a try and let me know if it works for you.
agentdr8 said:
Give the latest version a try and let me know if it works for you.
Click to expand...
Click to collapse
Thank you very much sir for your work. I installed SkypeX v1.1, but I can't sign in with Skype 19.1 modified. I don't know why. Other modification in Androidmanifest.xml ? I don't know. That is ! Your module is great. My gratitude for you . Best regards.
cristicaras said:
Thank you very much sir for your work. I installed SkypeX v1.1, but I can't sign in with Skype 19.1 modified. I don't know why. Other modification in Androidmanifest.xml ? I don't know. That is ! Your module is great. My gratitude for you . Best regards.
Click to expand...
Click to collapse
You enable the dual app mode, then type in the package name of your 2nd Skype app into the field below the switchbox. You said it was com.skype_custom.ryder or something of that sort? Can you enable debugging and send the xposed error.log to me?
your right I did have 3.2 & seems it did stick that in the prefs, perhaps have it check the installed version when you open the settings (orig thought it did) or a button to do so?
I need to reboot for v1.1, will test sooner or later