Hello everyone I am new to the forum, I would like to help I have a x10 mini that does not turn on and does not load after flashing the kernel smartphone with battery percentage to 1%, but the flash went wrong and why the smartphone is turned off during the flash , I tried to replace the battery with a new one but nnt, I also tried with seus, pc companion and reflash the kernel, but the smartphone is not detected.
Helpp!!:crying:
Related
Hello, i need help because my X10 mini and not light or the sony logo, wanting to increase the baseband but I put a want of x8, now I've done everything but does not work, sony companion and seus says I have the latest software, and install a version 1.6 flashx10 e10i (when mine was E10A) accept the installation but still does not turn, I'm really desperate, I can only enter the flash mode, but I can not do anything else, and angry While Sony does not want to update the phone (which is why I wanted to minicm) and those who create custom rom both have to be well received thanks but when help ignore a problem, please help nesecito now.
Use Flash tools.
first download Flash tools
http://forum.xda-developers.com/showthread.php?t=920746
after download firmware
http://forum.xda-developers.com/showthread.php?t=825664
Ok im downloading the flashtool and e10a firm, but in the last time i got a UPDATE OF 15 hours, its normal to flash the phone got that time?
I succesful flash the phone, but now, i cant go to the flash mode, and the phone now completely dont turn on, only the red led flash 3 times, WTF? help
I also had the same problem . The red led flash three times because your phones battery is dead. So you plug in your phone with usb cable to the computer and let it remain for two or more hour . During this time the phone would not turn on and you can do nothing with your phone during this time. You will only see the red led . After two hours of charging disconnect and run seus and Follow the onscreen instruction. I followed the above mentioned procedure and I got my mini back .
Sent from my X10mini using XDA Premium App
I have managed to brick my X10 mini pro by trying to instal CWM Recovery, and now am stuck at SE logo screen.
So far i've tried:
1. Seus - it says my x10 mini pro is up to date and no update available
2. PC Companion - i tried the repair option, but in the end it doesn't let me repair
3. FlashTool - tryed flashing original kernel, new kernel, 1.6android kernel.... and after flashing it keeps getting me to reboot it, and activate debugging mode, which i can't because i'm still stuck at SE logo screen
4. Omnius - payed for a 1 day licence. I can flash it, but still nothing happens. I can't flash read my SE, and can't find any repair option in it...
Is there anything that can whipe it clean, and put the original stuff back again? Or any other solution?
P.S. I can't turn of the screen, not even with home+backbutton+power, only if i get the battery out.
I never thought the repair option in PC Companion wouldn't work if i ever bricked my phone, but ... as I can see for myself it doesn't .
Thank you in advance... hope to get it running, even if it costs me some money
And once again seus ! But remeber seus is not pc companion
Hey there,
If you take out your battery for over a minute and then put it back in, it should stop trying to boot up.
Also, when u connect your phone to the computer while keeping the back button pressed, SEUS should be able to install stock software/firmware regardless of it's opinion that u already have the latest.
This thread is very detailed about unbricking your phone too --> http://forum.xda-developers.com/showthread.php?t=1040149 (helped me lots before as well)
and you might also wanna install the file added to this thread's openingspost --> http://forum.xda-developers.com/showthread.php?t=1030902
Goodluck with your phone
hi guys. i'm from malaysia. i have problems after flashing my x10 mini from 006 baseband to 015 baseband. i also flash the kernel to naA-08 kernel and install cyanogen mod mini. after installation succeed using the cmw and update.zip method i cant charge the battery anymore via usb and it can be charge using wall plug but my x10 mini can only hold 5minutes after that battery will empty. "please insert sim card" also appear. i used many kinds of sim card but nothing change. after that i use flashtools and seus to get back my stock firmware. after succeed flash with seus and flashtools the many times. the problems is still same. battery and sim card. really mess. please help....
sorry for my bad english
Hi all,
sorry for starting new thread. But i have some strange problem on my Xperia x10 mini pro.
I was trying to install a custom rom on my xperia x10 mini pro. i've successively installed ICA kernel on my phone. then i've installed Mini CM7 gingerbread rom on my phone. but after successful completion my phone stuck at ica logo only. so i have flash again the kernal to its original xperia kernal with the help of flash tool.
but as i flash the kenel, my phone become dead. no restart, no light signal, no any sign of working. I have also tried to put the phone in charger about an hour but still i cant able to start the phone. Even my phone is not detected on pc in PC companion or SEUS.
how can i get back my phone? Kindly help me..
Thanks in advance!!!
hrdpgajjar said:
...
but after successful completion my phone stuck at ica logo only. so i have flash again the kernal to its original xperia kernal with the help of flash tool.
but as i flash the kenel, my phone become dead. no restart, no light signal, no any sign of working. I have also tried to put the phone in charger about an hour but still i cant able to start the phone. Even my phone is not detected on pc in PC companion or SEUS.
how can i get back my phone? Kindly help me..
...
Click to expand...
Click to collapse
Flashtool doesn't have the original xperia kernel. What you flashed is the bootloader relock kernel for the X10 (the huge one) not the X10 mini pro.
Only solution for you is a JTAG.
Secondly... What is the ICA kernel? Never heard of it.
What is JTAG and how can i use it to get my phone back...????
hrdpgajjar said:
What is JTAG and how can i use it to get my phone back...????
Click to expand...
Click to collapse
Did you solve the problem? Ihave the same... and no idea about waht to do!
I flashed wrong kernel(x10 v1 brelock.) with flashtool and now my phone not turns on or even not recognised by flashtool and sony ericson pc companion.i flashed with kernel that is already present in firmware folder.now my phone led are also not flashing or even it doent vibrate. I searched google also but it says that it can be is done by jtag. is there any other way? please find solution fast.please help
thanks.........