[Q] Xperia X10 mini pro dead after kernel flash - Sony Ericsson XPERIA X10 Mini

Hi all,
sorry for starting new thread. But i have some strange problem on my Xperia x10 mini pro.
I was trying to install a custom rom on my xperia x10 mini pro. i've successively installed ICA kernel on my phone. then i've installed Mini CM7 gingerbread rom on my phone. but after successful completion my phone stuck at ica logo only. so i have flash again the kernal to its original xperia kernal with the help of flash tool.
but as i flash the kenel, my phone become dead. no restart, no light signal, no any sign of working. I have also tried to put the phone in charger about an hour but still i cant able to start the phone. Even my phone is not detected on pc in PC companion or SEUS.
how can i get back my phone? Kindly help me..
Thanks in advance!!!

hrdpgajjar said:
...
but after successful completion my phone stuck at ica logo only. so i have flash again the kernal to its original xperia kernal with the help of flash tool.
but as i flash the kenel, my phone become dead. no restart, no light signal, no any sign of working. I have also tried to put the phone in charger about an hour but still i cant able to start the phone. Even my phone is not detected on pc in PC companion or SEUS.
how can i get back my phone? Kindly help me..
...
Click to expand...
Click to collapse
Flashtool doesn't have the original xperia kernel. What you flashed is the bootloader relock kernel for the X10 (the huge one) not the X10 mini pro.
Only solution for you is a JTAG.
Secondly... What is the ICA kernel? Never heard of it.

What is JTAG and how can i use it to get my phone back...????

hrdpgajjar said:
What is JTAG and how can i use it to get my phone back...????
Click to expand...
Click to collapse
Did you solve the problem? Ihave the same... and no idea about waht to do!

Related

X10 Mini Pro bricked

Hello ! I have a Xperia X10 Mini Pro and I have flashed my telephone with a custom rom 2.3. It has freeze in SMS application and I have reboot the smartphone, since it does not restart. I have flash the telephone with Flashtool and SEUS with rom 2.1 but does not work. Help me please,
PS : Sorry for my bad English, I'm French.
EDIT : It reboot in a loop.
I would try removing the battery for a minute or two, remove and format the sd card (backup any data you want to save) get SEUS up and running on the PC and then connect the phone. Select the option to repair and wait.
(Sent from u20i using D4rKnYsSys/Slade87 Cyanocomb + tapatalk)
I have already try this method but this not work
EDIT : It would not be a hardware problem?
I have downloaded the official firmware and flashed it myself using x10FlashTool.
later then I updated the firmware with SEUS.
Hopefully it'll work the same for you.
Best regards,
Ron
I did that but it does not work :'(
did you try PC Companion? it work for me
Not work for me.
Help me please
SEUS will work
Updated firmware with SEUS dont click on repair, Just click on installed.
If it say that your phone has already updated ignore that & click on "install" & follow procedure.
Hope it work It work on mine.....
Does not work for me :'(
ayme.32 said:
Does not work for me :'(
Click to expand...
Click to collapse
check this thread
http://forum.xda-developers.com/showthread.php?t=1187033
wOrHeR SvK had the problem and yesterday he got his phone working
I had this problem a loooong time ago too.
Lucky for me my wife got the same mini pro and had not yet updatet the original stock ROM in any way.
I connected her mini pro to SEUS. Got the update-notification, followed to the part where you remove the USB-cable, turn off and then reattach the USB-cable while holding the back-key (only here i attached my bricked mini pro).
Guess the rest...
Bad news for your phone.
I think your phone is fully bricked and I think there's no chance to recover it.
honam1021 said:
I think your phone is fully bricked and I think there's no chance to recover it.
Click to expand...
Click to collapse
its not fully bricked
its maybe having driver problem on his pc
Look u deffo got the drivers for your phone and are u using seus properly because seus will always fix bricked phone unless manafacuring prob and 12 month warenty because they cant turn it on so they cant no had root
Seus or return
My Mini Pro flash very well without any errors but it does not restart.
This can be boot patrition problem, go to service or try Davinci team's flash tool(10euro ).
Sent from my SE X10 Mini [email protected] v1.4 by D4 using Taptalk Premium
What is service and davinci flash tool ?
Check this:
http://www1.davinciteam.com/
Service is place where your phone get repaired( I don't know any other english word to say this...)
Does it work ?

[Q] Help Pls! I Think I Killed my Phone

Hi guys!
I think I killed my phone. I upgraded to the GingerDx - V13 ROM, the first day it was working fine. Then the next day the screen is getting messed up until it won't start anymore. I tried using PC companion to hopefully factory reset it but (which it manages to finish the restoration) but now it is really not booting. It just lights up and then turns off. No SE logo or anything. Now I'm stuck as I don't know what to do next.
Thanks in advance to anyone that can help.
pabling19 said:
Hi guys!
I think I killed my phone. I upgraded to the GingerDx - V13 ROM, the first day it was working fine. Then the next day the screen is getting messed up until it won't start anymore. I tried using PC companion to hopefully factory reset it but (which it manages to finish the restoration) but now it is really not booting. It just lights up and then turns off. No SE logo or anything. Now I'm stuck as I don't know what to do next.
Thanks in advance to anyone that can help.
Click to expand...
Click to collapse
PC companion is not good.. try flash with SEUS..!! Google it..u may find a download..
In order to restore a bricked mini pro:
-Launch SEUS (NOT PC Companion)
-When asked to plug the phone, press Home+Back (and keep them pressed) and then plug the phone on usb.
-Release Home and only keep the "back" button pressed.
If you followed the sequence properly, you will see the green led on and flashing process will start. If not, try it again.
faiyyaz said:
PC companion is not good.. try flash with SEUS..!! Google it..u may find a download..
In order to restore a bricked mini pro:
-Launch SEUS (NOT PC Companion)
-When asked to plug the phone, press Home+Back (and keep them pressed) and then plug the phone on usb.
-Release Home and only keep the "back" button pressed.
If you followed the sequence properly, you will see the green led on and flashing process will start. If not, try it again.
Click to expand...
Click to collapse
I forgot to say that my LED is not working anymore (dunno why) I am trying to find SEUS installer. It seemed like you can't download it through SE's website.
EDIT:
WTF?! I dunno there's another XPERIA Mini Pro which is NOT X10 Mini Pro. I flashed my X10 Mini Pro with the Xperia Mini Pro ROM Maybe that's why it's not booting anymore.
I tried reflashing it with the correct X10 Mini Pro (via PC Companion) ROM but still no effect. Maybe I messed up the phone big time? I will try SEUS if I can find one. I hope it works.
pabling19 said:
I forgot to say that my LED is not working anymore (dunno why) I am trying to find SEUS installer. It seemed like you can't download it through SE's website.
EDIT:
WTF?! I dunno there's another XPERIA Mini Pro which is NOT X10 Mini Pro. I flashed my X10 Mini Pro with the Xperia Mini Pro ROM Maybe that's why it's not booting anymore.
I tried reflashing it with the correct X10 Mini Pro (via PC Companion) ROM but still no effect. Maybe I messed up the phone big time? I will try SEUS if I can find one. I hope it works.
Click to expand...
Click to collapse
Looks like a hard brick in my opinion if you flashed the wrong phone's firmware I suggest you send the phone back to SE for repair.
pabling19 said:
I forgot to say that my LED is not working anymore (dunno why) I am trying to find SEUS installer. It seemed like you can't download it through SE's website.
EDIT:
WTF?! I dunno there's another XPERIA Mini Pro which is NOT X10 Mini Pro. I flashed my X10 Mini Pro with the Xperia Mini Pro ROM Maybe that's why it's not booting anymore.
I tried reflashing it with the correct X10 Mini Pro (via PC Companion) ROM but still no effect. Maybe I messed up the phone big time? I will try SEUS if I can find one. I hope it works.
Click to expand...
Click to collapse
You can get SEUS here
http://dl-www.sonyericsson.com/cws/download/1/110/61/1309763183/Update_Service_Setup-2.11.7.13.exe just see if it works
faiyyaz;17405774[QUOTE said:
]You can get SEUS here
http://dl-www.sonyericsson.com/cws/download/1/110/61/1309763183/Update_Service_Setup-2.11.7.13.exe just see if it works
Click to expand...
Click to collapse
Hi,
Thanks a lot for the link. I tried using it, still not working. I have a feeling that it really is hard bricked now. My next try will be using flashtool this time.
Edit:
Tried FlashTool, still dead. My phone needs an overhaul Too bad it's not under warranty anymore
try to unplug your batterie, wait ... plug the batterie, start into recovery ( clockmod ) and reflash with a new rom .
If your bootloader is lock, you cant brick your phone
How to rescue our bricked phone for x8 http://forum.xda-developers.com/showthread.php?t=1011071
PS: Are you sure you have the good firmware ?
In the post of doixant ( x8 ), you can see : Latest kernel and latest baseband xxx015
Another exemple : MiniCM7 for X10 mini ( not pro ) : Latest 2.1.1.A.0.6/2.1.1.C.0.0 SE firmware / Baseband: M76XX-TSNCJOLYM-53404015 due to kernel dependencies. This is automatically tested during the installation.
I guess, it's same for all custom rom
Sorry for my bad English
faiyyaz said:
PC companion is not good.. try flash with SEUS..!! Google it..u may find a download..
In order to restore a bricked mini pro:
-Launch SEUS (NOT PC Companion)
-When asked to plug the phone, press Home+Back (and keep them pressed) and then plug the phone on usb.
-Release Home and only keep the "back" button pressed.
If you followed the sequence properly, you will see the green led on and flashing process will start. If not, try it again.
Click to expand...
Click to collapse
I ve never press Home+Back , only back.
Sorry for double post
Edit :
pabling19 said:
Hi,
Thanks a lot for the link. I tried using it, still not working. I have a feeling that it really is hard bricked now. My next try will be using flashtool this time.
Edit:
Tried FlashTool, still dead. My phone needs an overhaul Too bad it's not under warranty anymore
Click to expand...
Click to collapse
Do you have already use Flashtool ?
If your are under Vista or Win 7, you must disable the UAC ( User Account Control ) for flashtool works. Search in google, I m french and i've found lots of pages, but in french.
Sorry if is useless, and for my bad English
pabling19 said:
faiyyaz;17405774
Hi said:
How is that the flash tool isnt workin?? Are u followin the steps properly..??
Well follow the 1st two instruction's here for flashtool of steps for installinng any ROM..
http://forum.xda-developers.com/showthread.php?p=16412835
Download flashtool n stock files.. See if it works.. N if on vista see wat spliff said..
Gintonic.SE by slade..
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I don 't know if you must put your phone into debugg USB for flashtool works. Try
@OP
I'm sorry, but I really think your phone IS a hard brick now . I remember reading about a user that flashed a Galaxy S firmware onto his Galaxy S2, in the end he had to send his phone to the repair shop.
The same is probably true of your phone. I think you had better send it to the repair shop .

x10 stuck at SE logo

hi all
im having a bit of trouble i have an xperia x10 and i recently flashed it wit feralab and now the phone is stuck at the SE log iv tryed reflashing with azuzu downgrade but nothing happens it stays at the SE logo i could do with some lamens terms on this one please as i dont understand how to get my phone working again please help ...
hey buddy, use the search next time...
http://forum.xda-developers.com/showpost.php?p=24770795&postcount=2119
Dont stress mate, its not a problem.
When all else fails you can always go back to the stock rom and start flashing again from there. There are a couple of ways to do this...
SEUS (Sony Ericsson Update Service) find it here...
http://sony-ericsson-update-service.en.uptodown.com/
Or PC Companion, here...
http://www.sonymobile.com/gb/tools/pc-companion/
Hope this helps,
Have fun
You should see doomkernel logo then xperia logo.Looks like you didnt flash anything.....
Sent from my x10i using xda premium
maybe he is on stock kernel
my phone is bricked
can i still flash if i dont have usb debugging enabled?
Damn guys, why don'y you use the SEARCH BUTTON before posting...
Try to flash it with PC Companion to repair to stock rom then you'll be able to flash again another rom...
You can also use Flashtool to make a lot of thing (Unlock, flash, root... etc..)
Hope it helps
just use flashtool to flash the stock firmware and enjoy!
I am having a similar problem. Using this guide to unlock my bootloader, my X10 stucks at the "Sony Ericsson" logo. I managed to do the kernel downgrade and the actual unlocking (using the setools2 batch file). After this I can't shut down my phone, which means I can't get into flash mode.
Any help?
---------- Post added at 05:51 PM ---------- Previous post was at 04:58 PM ----------
jex123 said:
I am having a similar problem. Using this guide to unlock my bootloader, my X10 stucks at the "Sony Ericsson" logo. I managed to do the kernel downgrade and the actual unlocking (using the setools2 batch file). After this I can't shut down my phone, which means I can't get into flash mode.
Any help?
Click to expand...
Click to collapse
I finally made it into flash mode like this:
remove battery
connect X10 to PC
hold the back button and insert battery
After I reinstalled stock rom with SEUS my SIM is not recognised. I tried lots of related topics but nothing worked.
UPDATE:
SEUS does not seems to reset the bootloader or kernel. Use PC Companion like suggested here.
X10i stuck at SE logo after downgraded it by using azuzu flashtool
hi, I am new here. I need a solution of my phone, model x10i. It stuck at SE logo after using Azuzu flashtool. Actually, I want to root my phone but I failed and now, I really want my phone back as usual. any solution? :crying:

THE UNBRICKABLE! Ray stuck on Sony Logo...

Hello guys,
I am on a trip to the UK. During the flight the phone was working fine. Turned it off during the landing and tried to turn it on when the plane landed. But it won't turn on. It's stuck on the Sony logo. The phone was rooted with locked bootloader. I managed to get into the CWM and backup and even made a fresh install of the ROM (zelly cream) I could use the aroma installer, the touchscreen wouldn't work though. PC companion recognises the phone, says there no update. I used flashtool several times. Everything installs correctly but still stuck on sony logo. Please help me. I am stuck with no phone on my trip.
Re: Ray stuck on Sony Logo.. Please help I am in a trip abroad!
was your bootloader Unlocked when you connected to PC Companion?
predatOr said:
was your bootloader Unlocked when you connected to PC Companion?
Click to expand...
Click to collapse
No. It was locked.
Re: Ray stuck on Sony Logo.. Please help I am in a trip abroad!
Use sony update tool not compagnon
sony xperia ray
ics 4.0.4 rooted
stock rom
matgras said:
Use sony update tool not compagnon
sony xperia ray
ics 4.0.4 rooted
stock rom
Click to expand...
Click to collapse
I tried. Says there's no update. I even flashed to the older GB firmwares but still says there's no updates.
Re: Ray stuck on Sony Logo.. Please help I am in a trip abroad!
Looks like a legit hard brick
sony xperia ray
ics 4.0.4 rooted
stock rom
It looks like a hardbrick, but if you're still under warranty then flash a stock firmware and send it to sony service center. Should be fine with locked bootloader
mihahn said:
It looks like a hardbrick, but if you're still under warranty then flash a stock firmware and send it to sony service center. Should be fine with locked bootloader
Click to expand...
Click to collapse
The phone's out of warranty.
I went to a shop that repairs phones, they sent it back in 3 days saying it can't be fixed. Now what? I have an expensive paperweight? It's not heavy enough for that either.
weird,I got stuck in sony logo more than 10 times.and repair it with flashtool did you follow the guide correctly?
Sent from my ST18i using xda premium
Only solution I found
I had almost a similar problem. I had installed the same rom to my xperia ray and tried to update it with different selections in aroma installer. The result was the phone stuck at the sony logo.
I tried PC companion and it recognised a sony phone but not a ray.
I tried seus, this detected correctly xperia ray, but it replied that there is no update for my phone.
I tried flashtool but it could not recognize my phone and any way I didn't have any thing to flash my ray. (I installed the drivers from the subdirectory)
So I tryied something I've used a year ago: Wotan server. I paid about $2 to get a license and after executing the steps of the tool, I finally had my phone back.
I know that I'm not an expert on the field, and maybe there are other free of charge ways to do the work, but this worked for my phone and this was the second time.
PS. After the procedure I updated my phone using SEUS and this time I kept the stock ICS files and converted them to ftf files
I think the internal memory chip is faulty or something. Or it wouldn't even boot in the first place?
Flashing a stock kernel with flashtool usually does the job for men when that happens...
negus40 said:
Flashing a stock kernel with flashtool usually does the job for men when that happens...
Click to expand...
Click to collapse
flash any firmware via Flashtol
firmware here : http://forum.xda-developers.com/showthread.php?t=1627627
Flashtool here : http://androxyde.github.io/index.html?1365876195000
_ziant_ said:
flash any firmware via Flashtol
firmware here : http://forum.xda-developers.com/showthread.php?t=1627627
Flashtool here : http://androxyde.github.io/index.html?1365876195000
Click to expand...
Click to collapse
Thanks. Did this a hundred times. Still not working It may be a hardware problem
Guys please help me
Guys please help me. I rooted, unlocked bootloaders and unbricked android phones many times before but I just don't know what to do now. I tried flashing with flashtool 10000 times, everything goes ok but the phone won't go past the sony logo. I tried removing the battery for days. I tried charging for days. I even tried unlocking the bootloader and installing custom kernels. No luck. SEUS said there's no update even though I flashed an old firmware and after unloacking the BL says the phone has modified firmware that cannot be modified , EMMA says no available services. The only thing I didn't try is the test points method but why would I?
Anyone has any idea what's going on? I don't have the money for another phone right now
Anyone??
neofyt05 said:
Guys please help me. I rooted, unlocked bootloaders and unbricked android phones many times before but I just don't know what to do now. I tried flashing with flashtool 10000 times, everything goes ok but the phone won't go past the sony logo. I tried removing the battery for days. I tried charging for days. I even tried unlocking the bootloader and installing custom kernels. No luck. SEUS said there's no update even though I flashed an old firmware and after unloacking the BL says the phone has modified firmware that cannot be modified , EMMA says no available services. The only thing I didn't try is the test points method but why would I?
Anyone has any idea what's going on? I don't have the money for another phone right now
Click to expand...
Click to collapse
What did you do before? Did you flash anything or what happend?
same with me, stucked. ><
Kiraichi said:
same with me, stucked. ><
Click to expand...
Click to collapse
Then read through the thread or Google. There is enough information on how to restore your Phone in this thread alone, never mind the rest of the forum or numerous threads that have been started in the last few months.
Sent from Myushi
mihahn said:
What did you do before? Did you flash anything or what happend?
Click to expand...
Click to collapse
The phone was rooted with a custom ROM (Zelly Cream 2.0). The rom was flashed weeks before that happened. I was on the plane playing games on the phone. Turned it off for landing. Tried turning it on after the plane landed and it was stuck on the sony logo. I could get into the CWM and used the Aroma installer using the keys as the touchscreen would not work.

x10 mini can't boot after flash...

x10 mini can't boot after flash...i flash the 2.6.32.60-nAa-jb-05 kernel without format the previous kernel which was gb one, i can't even turn on my phone and connect to pc, it is no response at all, how to fix it??
watihell said:
x10 mini can't boot after flash...i flash the 2.6.32.60-nAa-jb-05 kernel without format the previous kernel which was gb one, i can't even turn on my phone and connect to pc, it is no response at all, how to fix it??
Click to expand...
Click to collapse
I don't suppose you've got the flashtool log for your last flash, but I think you've accidentally flashed the x10blrelock.ftf, in which case, the only way to revive your phone is to have it jtagged at a repair-shop.
SmG67 said:
I don't suppose you've got the flashtool log for your last flash, but I think you've accidentally flashed the x10blrelock.ftf, in which case, the only way to revive your phone is to have it jtagged at a repair-shop.
Click to expand...
Click to collapse
i think i wil go for repair for once...ahha
watihell said:
i think i wil go for repair for once...ahha
Click to expand...
Click to collapse
If you had flashing the GB kernel of course you had unlock your bootloader, so try to flash SEMC DEBRAND ENGINE by atchojan,, but make sure the green light is on when you flash this rom, so the phone can be flashing
sent from my Cleo (K510i)
hey bro!!! how u fixed the phone i got the same problem
watihell said:
x10 mini can't boot after flash...i flash the 2.6.32.60-nAa-jb-05 kernel without format the previous kernel which was gb one, i can't even turn on my phone and connect to pc, it is no response at all, how to fix it??
Click to expand...
Click to collapse
Try SEUS or PC Companion repair option. It repaired successfully and update to stock 2.1 ROM for mine.
However, I am now trying to fix the near dead battery issue where it just restarts and refuse to continue loading after initial Sony Ericsson logo (for second or two).

Categories

Resources