x10 mini can't boot after flash...i flash the 2.6.32.60-nAa-jb-05 kernel without format the previous kernel which was gb one, i can't even turn on my phone and connect to pc, it is no response at all, how to fix it??
watihell said:
x10 mini can't boot after flash...i flash the 2.6.32.60-nAa-jb-05 kernel without format the previous kernel which was gb one, i can't even turn on my phone and connect to pc, it is no response at all, how to fix it??
Click to expand...
Click to collapse
I don't suppose you've got the flashtool log for your last flash, but I think you've accidentally flashed the x10blrelock.ftf, in which case, the only way to revive your phone is to have it jtagged at a repair-shop.
SmG67 said:
I don't suppose you've got the flashtool log for your last flash, but I think you've accidentally flashed the x10blrelock.ftf, in which case, the only way to revive your phone is to have it jtagged at a repair-shop.
Click to expand...
Click to collapse
i think i wil go for repair for once...ahha
watihell said:
i think i wil go for repair for once...ahha
Click to expand...
Click to collapse
If you had flashing the GB kernel of course you had unlock your bootloader, so try to flash SEMC DEBRAND ENGINE by atchojan,, but make sure the green light is on when you flash this rom, so the phone can be flashing
sent from my Cleo (K510i)
hey bro!!! how u fixed the phone i got the same problem
watihell said:
x10 mini can't boot after flash...i flash the 2.6.32.60-nAa-jb-05 kernel without format the previous kernel which was gb one, i can't even turn on my phone and connect to pc, it is no response at all, how to fix it??
Click to expand...
Click to collapse
Try SEUS or PC Companion repair option. It repaired successfully and update to stock 2.1 ROM for mine.
However, I am now trying to fix the near dead battery issue where it just restarts and refuse to continue loading after initial Sony Ericsson logo (for second or two).
Related
hello, my phone stacked at the Sony Ericsson logo and i cant repair it from PC companion and now i try to fix it with flash tool and i search for any firmware. please give some links or try to help me.
Explain more how did u get bootloop??????
What u were doing??? Which ROM??
---------- Post added at 10:17 PM ---------- Previous post was at 10:12 PM ----------
May be this could help u.........
http://forum.xda-developers.com/showthread.php?t=1125587
i wanted to install my phone from new and i clicked on clean in flash tool and then my phone got stacked. my phone had the newest version. I tried also seue and it said that i have the newest firmware and i cant fix it. Now i try to fix it with flashing new firmware.
opayal said:
i wanted to install my phone from new and i clicked on clean in flash tool and then my phone got stacked. my phone had the newest version. I tried also seue and it said that i have the newest firmware and i cant fix it. Now i try to fix it with flashing new firmware.
Click to expand...
Click to collapse
in SEUS you have to click the "repair" option, that should do it
I have the same problem.
I've rebooted from CWM recovery after a new rom installation, and it told me that the recovery was broken.
So I choose to repair it but it didn't work.
I tried few times (5 or 6) and, at the end, I decided to switch off the phone and reboot.
Since then my phone is stacked on the Sony Ericsson Logo, it'is impossible to connect it using the "back" button and it is impossible to use SUSE properly I guess 'cause I tried but it does not recognize the phone.... I tried with an hard reset (Home+power) but it shuts down and then again it stacks.
Obviously the back button does not allow me to go on recovery mode....
My sister will kill me!
Im on the same boat (looking for fw)
looking for 2.1 for x10a (e10a) ver 2.0.A.0.504
all hosted in m3g4upl04d/m3g4sh4r3 are lost
Regards
download E10a firmware and flash it using flashtools
romolito said:
I have the same problem.
I've rebooted from CWM recovery after a new rom installation, and it told me that the recovery was broken.
So I choose to repair it but it didn't work.
I tried few times (5 or 6) and, at the end, I decided to switch off the phone and reboot.
Since then my phone is stacked on the Sony Ericsson Logo, it'is impossible to connect it using the "back" button and it is impossible to use SUSE properly I guess 'cause I tried but it does not recognize the phone.... I tried with an hard reset (Home+power) but it shuts down and then again it stacks.
Obviously the back button does not allow me to go on recovery mode....
My sister will kill me!
Click to expand...
Click to collapse
1st, have you tried connecting your phone via flash mode to flashtool ? Can flashtool detect it ? Because, if your phone can enter sony logo, I think SEUS /flashtool will be able to detect it as well..
In case SEUS still fails but flashtool is able to connect,, try to install nAa latest kernel (I suggest to redownloading it), since it contains recoovery as well..
Hopefully that helps..
Sent from my U20i using XDA
opayal said:
hello, my phone stacked at the Sony Ericsson logo and i cant repair it from PC companion and now i try to fix it with flash tool and i search for any firmware. please give some links or try to help me.
Click to expand...
Click to collapse
Don't worry my friend. Just give me some time to find an X10 Mini and I'll provide you an .ftf.
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
did you try flashing any stock ftf rom file using flashtool?
or repair using PCC or SEUS.
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
Repair with Pc Companion or Update Service
Instructions:
Hold your back button (3button) , then connect with ur USB to x10 untill the LED light appear, after that wAAAit ur cpu install ur driver, then go pcc update ur phone, if it pop out that u have last software just continue it , AAAfter that all, ur bricked x10 hAAAve been repair
Hope helps
Superman™
It wont boot into flash mode or recovery , i know how to flash etc but i cant get it into flashmode (downloading mode) . Pc not picking it up either
Thanks anyways
Any other ideas
gordonx10i said:
It wont boot into flash mode or recovery , i know how to flash etc but i cant get it into flashmode (downloading mode) . Pc not picking it up either
Thanks anyways
Any other ideas
Click to expand...
Click to collapse
Then I guess you cant do anything about it
Also if if it wont boot in recovery or to the rom I dont think SE people can know that its running unofficial roms
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
Hey gordonx10i, did you try with "x10_2.3_aro"?
Try flash by this, then try to start xRecovery into SEXperia
Check the following XDA Post: http://forum.xda-developers.com/showthread.php?p=16118511
Directly link provided by efx_d3
http://mir.cr/0OIDEZNA
Problem is device not even seen by pc anymore it so dunno how to get it into flash mode is there perhaps not a script exploit that can be run from sd card ......
Sent from my GT-P7500 using xda app-developers app
How to get back to stock even with a broken USB
While I think this might help you :
http://forum.xda-developers.com/showthread.php?t=1054818
Take care mate !
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
gordonx10i said:
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
THeLogiC said:
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
Click to expand...
Click to collapse
+1 on that
Always works
If you had ferakernel, you don't even need to hold back lol
Sent from my Xperia X10 using xda premium
gordonx10i said:
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
ARO 2.3.3 kernal saved my life bro, i think you'll have the same luck too go ahead with that :good:
Unbricked from se logo screen
THeLogiC said:
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
Click to expand...
Click to collapse
thanx dude..
I have da same problem as gordonx10i
It worked for me from your firmware collection :good:
raghava_teja said:
thanx dude..
I have da same problem as gordonx10i
It worked for me from your firmware collection :good:
Click to expand...
Click to collapse
Glad it helped
Sent from my X10
does this method can fix my problem also?
also got stuck bootloader,
because of trying to unlock bootloader..
i guess its my fault, tryng to unlock while im in custom rom?
currently im downloading 2.3.3 stock rom,
and will try to flash it later..
ive tried already PCC and SEUS and still no luck.. (no available updates) =(
THeLogiC said:
Glad it helped
Sent from my X10
Click to expand...
Click to collapse
wow it works.. thnx! ive downloaded the rom in your link!! thnx a lot! ive managed to fix my fone.. =)
thanks!!
jrennald said:
wow it works.. thnx! ive downloaded the rom in your link!! thnx a lot! ive managed to fix my fone.. =)
thanks!!
Click to expand...
Click to collapse
No problem again
Sent from my X10
THeLogiC said:
No problem again
Sent from my X10
Click to expand...
Click to collapse
Remember guys X10 can't be bricked... it can always be unbricked and that too very easily all required is bit of patience to go through the forum
Sent from my Transformer TF101 using xda app-developers app
Hello guys,
I am on a trip to the UK. During the flight the phone was working fine. Turned it off during the landing and tried to turn it on when the plane landed. But it won't turn on. It's stuck on the Sony logo. The phone was rooted with locked bootloader. I managed to get into the CWM and backup and even made a fresh install of the ROM (zelly cream) I could use the aroma installer, the touchscreen wouldn't work though. PC companion recognises the phone, says there no update. I used flashtool several times. Everything installs correctly but still stuck on sony logo. Please help me. I am stuck with no phone on my trip.
Re: Ray stuck on Sony Logo.. Please help I am in a trip abroad!
was your bootloader Unlocked when you connected to PC Companion?
predatOr said:
was your bootloader Unlocked when you connected to PC Companion?
Click to expand...
Click to collapse
No. It was locked.
Re: Ray stuck on Sony Logo.. Please help I am in a trip abroad!
Use sony update tool not compagnon
sony xperia ray
ics 4.0.4 rooted
stock rom
matgras said:
Use sony update tool not compagnon
sony xperia ray
ics 4.0.4 rooted
stock rom
Click to expand...
Click to collapse
I tried. Says there's no update. I even flashed to the older GB firmwares but still says there's no updates.
Re: Ray stuck on Sony Logo.. Please help I am in a trip abroad!
Looks like a legit hard brick
sony xperia ray
ics 4.0.4 rooted
stock rom
It looks like a hardbrick, but if you're still under warranty then flash a stock firmware and send it to sony service center. Should be fine with locked bootloader
mihahn said:
It looks like a hardbrick, but if you're still under warranty then flash a stock firmware and send it to sony service center. Should be fine with locked bootloader
Click to expand...
Click to collapse
The phone's out of warranty.
I went to a shop that repairs phones, they sent it back in 3 days saying it can't be fixed. Now what? I have an expensive paperweight? It's not heavy enough for that either.
weird,I got stuck in sony logo more than 10 times.and repair it with flashtool did you follow the guide correctly?
Sent from my ST18i using xda premium
Only solution I found
I had almost a similar problem. I had installed the same rom to my xperia ray and tried to update it with different selections in aroma installer. The result was the phone stuck at the sony logo.
I tried PC companion and it recognised a sony phone but not a ray.
I tried seus, this detected correctly xperia ray, but it replied that there is no update for my phone.
I tried flashtool but it could not recognize my phone and any way I didn't have any thing to flash my ray. (I installed the drivers from the subdirectory)
So I tryied something I've used a year ago: Wotan server. I paid about $2 to get a license and after executing the steps of the tool, I finally had my phone back.
I know that I'm not an expert on the field, and maybe there are other free of charge ways to do the work, but this worked for my phone and this was the second time.
PS. After the procedure I updated my phone using SEUS and this time I kept the stock ICS files and converted them to ftf files
I think the internal memory chip is faulty or something. Or it wouldn't even boot in the first place?
Flashing a stock kernel with flashtool usually does the job for men when that happens...
negus40 said:
Flashing a stock kernel with flashtool usually does the job for men when that happens...
Click to expand...
Click to collapse
flash any firmware via Flashtol
firmware here : http://forum.xda-developers.com/showthread.php?t=1627627
Flashtool here : http://androxyde.github.io/index.html?1365876195000
_ziant_ said:
flash any firmware via Flashtol
firmware here : http://forum.xda-developers.com/showthread.php?t=1627627
Flashtool here : http://androxyde.github.io/index.html?1365876195000
Click to expand...
Click to collapse
Thanks. Did this a hundred times. Still not working It may be a hardware problem
Guys please help me
Guys please help me. I rooted, unlocked bootloaders and unbricked android phones many times before but I just don't know what to do now. I tried flashing with flashtool 10000 times, everything goes ok but the phone won't go past the sony logo. I tried removing the battery for days. I tried charging for days. I even tried unlocking the bootloader and installing custom kernels. No luck. SEUS said there's no update even though I flashed an old firmware and after unloacking the BL says the phone has modified firmware that cannot be modified , EMMA says no available services. The only thing I didn't try is the test points method but why would I?
Anyone has any idea what's going on? I don't have the money for another phone right now
Anyone??
neofyt05 said:
Guys please help me. I rooted, unlocked bootloaders and unbricked android phones many times before but I just don't know what to do now. I tried flashing with flashtool 10000 times, everything goes ok but the phone won't go past the sony logo. I tried removing the battery for days. I tried charging for days. I even tried unlocking the bootloader and installing custom kernels. No luck. SEUS said there's no update even though I flashed an old firmware and after unloacking the BL says the phone has modified firmware that cannot be modified , EMMA says no available services. The only thing I didn't try is the test points method but why would I?
Anyone has any idea what's going on? I don't have the money for another phone right now
Click to expand...
Click to collapse
What did you do before? Did you flash anything or what happend?
same with me, stucked. ><
Kiraichi said:
same with me, stucked. ><
Click to expand...
Click to collapse
Then read through the thread or Google. There is enough information on how to restore your Phone in this thread alone, never mind the rest of the forum or numerous threads that have been started in the last few months.
Sent from Myushi
mihahn said:
What did you do before? Did you flash anything or what happend?
Click to expand...
Click to collapse
The phone was rooted with a custom ROM (Zelly Cream 2.0). The rom was flashed weeks before that happened. I was on the plane playing games on the phone. Turned it off for landing. Tried turning it on after the plane landed and it was stuck on the sony logo. I could get into the CWM and used the Aroma installer using the keys as the touchscreen would not work.
Hi guys, i don't know how to solve a problem with my Sola. I read the recover soft-brick guide for xperia models but i can't solve it. I think i bricked.
When i try to turn on it's on Sony screen and there's nothing to do. I can use on flash mode and flash the kernel but the result is the same when i turn on. The led works like green in flash mode, or red when i finish the flash and the device is still connected. I have a locked bootloader, and all this happened when i wanted to restore a backup, i probably made a mistake: do a full wipe after that. I think that's is still in warranty, isnt' it? What can i do? There are some tips on the tutorial but i'm afraid to kill the battery or make other mistakes. Please help me guys.
And sorry for my bad english =(
brimbi said:
Hi guys, i don't know how to solve a problem with my Sola. I read the recover soft-brick guide for xperia models but i can't solve it. I think i bricked.
When i try to turn on it's on Sony screen and there's nothing to do. I can use on flash mode and flash the kernel but the result is the same when i turn on. The led works like green in flash mode, or red when i finish the flash and the device is still connected. I have a locked bootloader, and all this happened when i wanted to restore a backup, i probably made a mistake: do a full wipe after that. I think that's is still in warranty, isnt' it? What can i do? There are some tips on the tutorial but i'm afraid to kill the battery or make other mistakes. Please help me guys.
And sorry for my bad english =(
Click to expand...
Click to collapse
Have you tried to flash a stock firmware with flashtool?
elia222 said:
Have you tried to flash a stock firmware with flashtool?
Click to expand...
Click to collapse
Yes and flash is ok but when i turn on it's still on sony screen...i waited about 5 minutes. I tried with 6.1.1.B.1.54 and with 6.1.1.B.1.1.0 with same result. I know i have to wait after flash a stock firmware but i see it's too much time. Maybe because when i want to switch off i have to use hard reset (i mean with all 3 button). I don't know..thanks to reply in any case
brimbi said:
Yes and flash is ok but when i turn on it's still on sony screen...i waited about 5 minutes. I tried with 6.1.1.B.1.54 and with 6.1.1.B.1.1.0 with same result. I know i have to wait after flash a stock firmware but i see it's too much time. Maybe because when i want to switch off i have to use hard reset (i mean with all 3 button). I don't know..thanks to reply in any case
Click to expand...
Click to collapse
In any case, if you don't solve the issue by yourself, your phone is still in warranty (just don't say to the reparation service that you played with flashtool )
elia222 said:
In any case, if you don't solve the issue by yourself, your phone is still in warranty (just don't say to the reparation service that you played with flashtool )
Click to expand...
Click to collapse
Yep i hope. What can i do now? When i charge it turn on by itself and always on sony logo (but led is off)
Also when i flash and it's still on usb port the led is red but the device is off, i'm looking for a solution on RECOVER SOFT-brick thread but i don't know in which part am i.
brimbi said:
Yep i hope. What can i do now? When i charge it turn on by itself and always on sony logo (but led is off)
Also when i flash and it's still on usb port the led is red but the device is off, i'm looking for a solution on RECOVER SOFT-brick thread but i don't know in which part am i.
Click to expand...
Click to collapse
You tried with the Sony PC Companion/Update Service? It uses flashmode.. When I bricked my U i had relocked my bootloader and flashed via PC Companion... Worked for me :fingers-crossed:
Press thanks if I helped:good:
Try to start from the beginning, and follow the instructions carefully.
dotafan said:
You tried with the Sony PC Companion/Update Service? It uses flashmode.. When I bricked my U i had relocked my bootloader and flashed via PC Companion... Worked for me :fingers-crossed:
Press thanks if I helped:good:
Click to expand...
Click to collapse
But i have a locked bootloader, will i invalidate warranty? i'm going to try with pc companion =)
No it won't!!
If you were on a custom rom flash kernel/ftf via flashtool nd then use PC Companion:thumbup:
Sent from my ST25i using xda app-developers app
It works!!!!!!!!
dotafan said:
No it won't!!
If you were on a custom rom flash kernel/ftf via flashtool nd then use PC Companion:thumbup:
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
It works! My sola works now! Thank you guys! Thank you very much!
brimbi said:
It works! My sola works now! Thank you guys! Thank you very much!
Click to expand...
Click to collapse
Glad I could help :good:
Hi all,
sorry for starting new thread. But i have some strange problem on my Xperia x10 mini pro.
I was trying to install a custom rom on my xperia x10 mini pro. i've successively installed ICA kernel on my phone. then i've installed Mini CM7 gingerbread rom on my phone. but after successful completion my phone stuck at ica logo only. so i have flash again the kernal to its original xperia kernal with the help of flash tool.
but as i flash the kenel, my phone become dead. no restart, no light signal, no any sign of working. I have also tried to put the phone in charger about an hour but still i cant able to start the phone. Even my phone is not detected on pc in PC companion or SEUS.
how can i get back my phone? Kindly help me..
Thanks in advance!!!
hrdpgajjar said:
...
but after successful completion my phone stuck at ica logo only. so i have flash again the kernal to its original xperia kernal with the help of flash tool.
but as i flash the kenel, my phone become dead. no restart, no light signal, no any sign of working. I have also tried to put the phone in charger about an hour but still i cant able to start the phone. Even my phone is not detected on pc in PC companion or SEUS.
how can i get back my phone? Kindly help me..
...
Click to expand...
Click to collapse
Flashtool doesn't have the original xperia kernel. What you flashed is the bootloader relock kernel for the X10 (the huge one) not the X10 mini pro.
Only solution for you is a JTAG.
Secondly... What is the ICA kernel? Never heard of it.
What is JTAG and how can i use it to get my phone back...????
hrdpgajjar said:
What is JTAG and how can i use it to get my phone back...????
Click to expand...
Click to collapse
Did you solve the problem? Ihave the same... and no idea about waht to do!