Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
did you try flashing any stock ftf rom file using flashtool?
or repair using PCC or SEUS.
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
Repair with Pc Companion or Update Service
Instructions:
Hold your back button (3button) , then connect with ur USB to x10 untill the LED light appear, after that wAAAit ur cpu install ur driver, then go pcc update ur phone, if it pop out that u have last software just continue it , AAAfter that all, ur bricked x10 hAAAve been repair
Hope helps
Superman™
It wont boot into flash mode or recovery , i know how to flash etc but i cant get it into flashmode (downloading mode) . Pc not picking it up either
Thanks anyways
Any other ideas
gordonx10i said:
It wont boot into flash mode or recovery , i know how to flash etc but i cant get it into flashmode (downloading mode) . Pc not picking it up either
Thanks anyways
Any other ideas
Click to expand...
Click to collapse
Then I guess you cant do anything about it
Also if if it wont boot in recovery or to the rom I dont think SE people can know that its running unofficial roms
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
Hey gordonx10i, did you try with "x10_2.3_aro"?
Try flash by this, then try to start xRecovery into SEXperia
Check the following XDA Post: http://forum.xda-developers.com/showthread.php?p=16118511
Directly link provided by efx_d3
http://mir.cr/0OIDEZNA
Problem is device not even seen by pc anymore it so dunno how to get it into flash mode is there perhaps not a script exploit that can be run from sd card ......
Sent from my GT-P7500 using xda app-developers app
How to get back to stock even with a broken USB
While I think this might help you :
http://forum.xda-developers.com/showthread.php?t=1054818
Take care mate !
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
gordonx10i said:
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
THeLogiC said:
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
Click to expand...
Click to collapse
+1 on that
Always works
If you had ferakernel, you don't even need to hold back lol
Sent from my Xperia X10 using xda premium
gordonx10i said:
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
ARO 2.3.3 kernal saved my life bro, i think you'll have the same luck too go ahead with that :good:
Unbricked from se logo screen
THeLogiC said:
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
Click to expand...
Click to collapse
thanx dude..
I have da same problem as gordonx10i
It worked for me from your firmware collection :good:
raghava_teja said:
thanx dude..
I have da same problem as gordonx10i
It worked for me from your firmware collection :good:
Click to expand...
Click to collapse
Glad it helped
Sent from my X10
does this method can fix my problem also?
also got stuck bootloader,
because of trying to unlock bootloader..
i guess its my fault, tryng to unlock while im in custom rom?
currently im downloading 2.3.3 stock rom,
and will try to flash it later..
ive tried already PCC and SEUS and still no luck.. (no available updates) =(
THeLogiC said:
Glad it helped
Sent from my X10
Click to expand...
Click to collapse
wow it works.. thnx! ive downloaded the rom in your link!! thnx a lot! ive managed to fix my fone.. =)
thanks!!
jrennald said:
wow it works.. thnx! ive downloaded the rom in your link!! thnx a lot! ive managed to fix my fone.. =)
thanks!!
Click to expand...
Click to collapse
No problem again
Sent from my X10
THeLogiC said:
No problem again
Sent from my X10
Click to expand...
Click to collapse
Remember guys X10 can't be bricked... it can always be unbricked and that too very easily all required is bit of patience to go through the forum
Sent from my Transformer TF101 using xda app-developers app
Related
hi guys i need your help A.S.A.P!!
I tried to restore my old version in my experia, because i got something very important written there that i need!
so i just entered the xrecovery and tried to restore..(not before i did backup)
the result now is the phone stuck at S.E's logo and keep rebooting till the logo.
when i tried to restore 1st, i waited some time and it didn't work (i dont remember what exactly it showed), then i tried to restore again and its writted:
E:Can't mount /dev/block/block/mmcb1k0)
(Device or resource busy)
Can't mount /sdcard
please guys i need you to help and to fix my phone and get my info from my old version, it is very important to me!
any help will be very appriciated, Thanks!!!!!
Painkille5 said:
hi guys i need your help A.S.A.P!!
I tried to restore my old version in my experia, because i got something very important written there that i need!
so i just entered the xrecovery and tried to restore..(not before i did backup)
the result now is the phone stuck at S.E's logo and keep rebooting till the logo.
when i tried to restore 1st, i waited some time and it didn't work (i dont remember what exactly it showed), then i tried to restore again and its writted:
E:Can't mount /dev/block/block/mmcb1k0)
(Device or resource busy)
Can't mount /sdcard
please guys i need you to help and to fix my phone and get my info from my old version, it is very important to me!
any help will be very appriciated, Thanks!!!!!
Click to expand...
Click to collapse
You have a faulty xrecovery installed mate!
Use SEUS to repair. Flashtool to root.
Once done, let me know. I have a safe, simple way of installing xrecovery (that works).
Also check http://forum.xda-developers.com/showthread.php?t=1054818
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Hi mate thanks alot for helping me!
Just to let you know..I used the Flashtool couple of times before and it always worked. (even it said that it worked when I did backup)
I still got some questions before I do what you told me:
When I will use SEUS to repair - will it install the stock rom on my device?
Do you think that the flashtool did backup my current version and data?
and..after I'll install xrecovery again..will I have my last "restores"? (will I be able to restore?) because the info there might be more expensive to me than the device itself.
Thanks alot again!! I will start working on it as soon as you will answer me please again A.S.A.P.
Hl
Painkille5 said:
Hi mate thanks alot for helping me!
Just to let you know..I used the Flashtool couple of times before and it always worked. (even it said that it worked when I did backup)
I still got some questions before I do what you told me:
When I will use SEUS to repair - will it install the stock rom on my device?
Do you think that the flashtool did backup my current version and data?
and..after I'll install xrecovery again..will I have my last "restores"? (will I be able to restore?) because the info there might be more expensive to me than the device itself.
Thanks alot again!! I will start working on it as soon as you will answer me please again A.S.A.P.
Click to expand...
Click to collapse
Seus will reinstall 2.3.3.
Flashtool doesn't create backup.
Yes, if u made a backup through xrecovery, you can restore it.
But b4 installation of xrecovery let me know
Hit thanks if helpful.
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
I ment that I used xrecovery and it worked to tell you that it was installked right, maybe something went wront but in first place it wasn't installed faulty.
and im looking for the SEUS, but i cant find any download for it, does the pc companion is good enough? (or maybe any 1 can give me a link for the download please?)
Painkille5 said:
I ment that I used xrecovery and it worked to tell you that it was installked right, maybe something went wront but in first place it wasn't installed faulty.
and im looking for the SEUS, but i cant find any download for it, does the pc companion is good enough? (or maybe any 1 can give me a link for the download please?)
Click to expand...
Click to collapse
You can use pc companion too.
Check these :
gadgets.apnafundaz.com/2010/07/downgrade-xperia-x10-to-original-generic-firmware-using-seus-new-debranding-method/
ucanphone.com/sony-ericsson/sony-ericsson-xperia-x10-update-service-165.html
www.livesony.com/forum/search.php?searchid=139999
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
i tried to conect the phone and do something with pc companion.
since its stuck boot loop (phone rebooting till SE's logo and again..)i couldnt do anything but "repair/ fix problems" option in pc companion when i conect my phone, press on back button and enter buttery..
it still didnt work because it says the there is still no avialable program to use in my phone..and to try later..
any help please???
im already getting alot of dmg since im without my phone please help
Painkille5 said:
i tried to conect the phone and do something with pc companion.
since its stuck boot loop (phone rebooting till SE's logo and again..)i couldnt do anything but "repair/ fix problems" option in pc companion when i conect my phone, press on back button and enter buttery..
it still didnt work because it says the there is still no avialable program to use in my phone..and to try later..
any help please???
im already getting alot of dmg since im without my phone please help
Click to expand...
Click to collapse
You should contact doomlord
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
who is doomlord?
Painkille5 said:
who is doomlord?
Click to expand...
Click to collapse
Dude!!!!!
He the who made this flashtool!!!
Search for his thread
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
milton.bain said:
Dude!!!!!
He the who made this flashtool!!!
Search for his thread
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Click to expand...
Click to collapse
He didn't make the flashtool but nevertheless he's a great dev.
Sent from my X10i using XDA App
aR_ChRiS said:
He didn't make the flashtool but nevertheless he's a great dev.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
ok guys he told me to flash the stock ftf
i have some questions, and i dont want to get on his nervs cuz he is pretty bussy..
he already told me that ftf is flashtool firmware file,and after some searching i understand that its a file that you put in the /firmware folder in the flashtool.
1.how will i be able to flash any file if my phone- not just stuck on SE's logo ,its keep rebooting!..?
2.what is UPS backup for PC??
3.how can i know how much batterty do i have or charging the phone? when i conect it to the charger the screen is still stuck on that loop so i dont even know if the phone is charning.
any 1?
Thanks!
Painkille5 said:
ok guys he told me to flash the stock ftf
i have some questions, and i dont want to get on his nervs cuz he is pretty bussy..
he already told me that ftf is flashtool firmware file,and after some searching i understand that its a file that you put in the /firmware folder in the flashtool.
1.how will i be able to flash any file if my phone- not just stuck on SE's logo ,its keep rebooting!..?
2.what is UPS backup for PC??
3.how can i know how much batterty do i have or charging the phone? when i conect it to the charger the screen is still stuck on that loop so i dont even know if the phone is charning.
any 1?
Thanks!
Click to expand...
Click to collapse
Ups backup is required for ur pc so that in case ur current goes off in midway you dont endup in bricking ur fone.
Yes ftf needs to be placed inside firmwire folder.
Open flashtool.re.keep it running.
Shut down your phone ,connect the data cable to phone,keep the back button pressed and insert the data cable to usb port. Your led will turn green. Goto flash and browse firmwire folder to select the ftf file.
Enjoy flashing!!!
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
milton.bain said:
Ups backup is required for ur pc so that in case ur current goes off in midway you dont endup in bricking ur fone.
Yes ftf needs to be placed inside firmwire folder.
Open flashtool.re.keep it running.
Shut down your phone ,connect the data cable to phone,keep the back button pressed and insert the data cable to usb port. Your led will turn green. Goto flash and browse firmwire folder to select the ftf file.
Enjoy flashing!!!
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Click to expand...
Click to collapse
"in case my current"=my pc turns off? quit the process in midway? i didnt really understand.
i cannot shut down my phone because its turning on and off automaticly till SE screen..
i figured out how to flash by conecting in without the battery and, press back button while puting on the battery (i hope it will work)
"flashtool.re.keep" -what this means?
but my main problem now is that i cant know what is my battery status (you need at least 50%- so i cant flush untill i find a solution for that..)
any help please??
Tnaks!!
Painkille5 said:
"in case my current"=my pc turns off? quit the process in midway? i didnt really understand.
i cannot shut down my phone because its turning on and off automaticly till SE screen..
i figured out how to flash by conecting in without the battery and, press back button while puting on the battery (i hope it will work)
"flashtool.re.keep" -what this means?
but my main problem now is that i cant know what is my battery status (you need at least 50%- so i cant flush untill i find a solution for that..)
any help please??
Tnaks!!
Click to expand...
Click to collapse
Yes you can enter flash mode by removing the battery and plugging it in, hold back button then insert the battery.
Sent from my X10i using XDA App
aR_ChRiS said:
Yes you can enter flash mode by removing the battery and plugging it in, hold back button then insert the battery.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
thats what i said i already know..
can you answer me to the rest of my questions please?
Painkille5 said:
"in case my current"=my pc turns off? quit the process in midway? i didnt really understand.
i cannot shut down my phone because its turning on and off automaticly till SE screen..
i figured out how to flash by conecting in without the battery and, press back button while puting on the battery (i hope it will work)
"flashtool.re.keep" -what this means?
but my main problem now is that i cant know what is my battery status (you need at least 50%- so i cant flush untill i find a solution for that..)
any help please??
Tnaks!!
Click to expand...
Click to collapse
I mean, ups is required so that evem your power supply/electricity goes off, you can carry on your work.
You can use external battery charger to charge your battery only.
Before flashing,pull out your battery...as you said.
Last resort: if all fails, go to se service center, they will repair it. They use the same pc companion. When i tried to flash my fone earlier,i was a dumb fella. I bricked it. Took it to service center and got it fixed.
Before flashing, watch doomlord's video of flasing at least 4 times. Then read the instructions and flash, keep the video running and pause at required places. This is how i flashed successfully on next instance.
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Hi mate if you think you backed up properly from xrecovery and it still in sd card, use card reader to retrieve it to pc. The file should be under sdcard/xrecovery/backup/xxxxx.zip. then try recover it from working phone with xrecovery. Hope this help n good luck.
Sent from my SO-01C using xda premium
milton.bain said:
I mean, ups is required so that evem your power supply/electricity goes off, you can carry on your work.
You can use external battery charger to charge your battery only.
Before flashing,pull out your battery...as you said.
Last resort: if all fails, go to se service center, they will repair it. They use the same pc companion. When i tried to flash my fone earlier,i was a dumb fella. I bricked it. Took it to service center and got it fixed.
Before flashing, watch doomlord's video of flasing at least 4 times. Then read the instructions and flash, keep the video running and pause at required places. This is how i flashed successfully on next instance.
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Click to expand...
Click to collapse
thank you very much!!!
when i will find a way to churge my battery ill tell you what ended up with this!
Thanks!!
Hi all, I have a problem with ADB, when I start to restore this phone hangs at the green light. When I recall the usb remains suspended with the green light and I have to remove the battery to restart. And the problem persists even restart the phone and remove the battery... ¡AND AGAIN, AGAIN, AGAIN,... :crying:
Xperia X10 details:
- My latest ROM before BRICK: Xperia S ICS ROM.
- My latest KERNEL before BRICK: FXP 137 ICS KERNEL.
PD: I want to go back to the original Xperia X10 ROM (2.3.3). I have used PC COMPANION and SEUS but software gives me a error. The phone does not start in any way. :crying:
Help me developers! :crying:
XperiaX10_User said:
Hi all, I have a problem with ADB, when I start to restore this phone hangs at the green light. When I recall the usb remains suspended with the green light and I have to remove the battery to restart. And the problem persists even restart the phone and remove the battery... ¡AND AGAIN, AGAIN, AGAIN,... :crying:
Xperia X10 details:
- My latest ROM before BRICK: Xperia S ICS ROM.
- My latest KERNEL before BRICK: FXP 137 ICS KERNEL.
PD: I want to go back to the original Xperia X10 ROM (2.3.3). I have used PC COMPANION and SEUS but software gives me a error. The phone does not start in any way. :crying:
Help me developers! :crying:
Click to expand...
Click to collapse
download 2.3.3 firmware from here: http://forum.xda-developers.com/showthread.php?t=1749426
flash the firmware through flashtool.
THeLogiC said:
download 2.3.3 firmware from here: http://forum.xda-developers.com/showthread.php?t=1749426
flash the firmware through flashtool.
Click to expand...
Click to collapse
This solution don't help me. The phone stock on ADB MODE, when I retire the USB, the phone is stock on green light (ADB MODE) and I remove the battery to restart phone. ADB MODE STOCK! ADB MODE DON'T WORK!
Help me, please! :crying: :crying::crying:
Don't use standard method
Use battery removal method
Remove battery
Plug USB cable only
When software says press back key....
Hold back button while reinserting battery
That will work for sure
Unless you have a USB problem
Or an underlying hardware fault
Also make sure to remove sim and memory card
Sent from my Xperia X10 using xda premium
wo88les said:
Don't use standard method
Use battery removal method
Remove battery
Plug USB cable only
When software says press back key....
Hold back button while reinserting battery
That will work for sure
Unless you have a USB problem
Or an underlying hardware fault
Also make sure to remove sim and memory card
Sent from my Xperia X10 using xda premium
Click to expand...
Click to collapse
+1
Sent from my X10
wo88les said:
Don't use standard method
Use battery removal method
Remove battery
Plug USB cable only
When software says press back key....
Hold back button while reinserting battery
That will work for sure
Unless you have a USB problem
Or an underlying hardware fault
Also make sure to remove sim and memory card
Sent from my Xperia X10 using xda premium
Click to expand...
Click to collapse
THeLogiC said:
+1
Sent from my X10
Click to expand...
Click to collapse
Sorry, this solution don't work... :crying:
Help me! :crying:
XperiaX10_User said:
Sorry, this solution don't work... :crying:
Help me! :crying:
Click to expand...
Click to collapse
What error are you getting?
Sent from my X10
THeLogiC said:
What error are you getting?
Sent from my X10
Click to expand...
Click to collapse
Hello Logic:
I don't getting any error, only STOCK: Flashing loader, Flashing data, AND STOCK! NO FLASHING!
Help me! I want my Xperia X10i. :crying:
HELP MEEE!! :crying::crying::crying::crying::crying::crying::crying:
XperiaX10_User said:
HELP MEEE!! :crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Did you try flashing firmware on another pc?
THeLogiC said:
Did you try flashing firmware on another pc?
Click to expand...
Click to collapse
Yes but no solution... :crying:
XperiaX10_User said:
Yes but no solution... :crying:
Click to expand...
Click to collapse
Cant really get what your problem is.
flashing a firmware from flashtool doesn't work? right?
:crying: please help me, I bricked my lww while installing unlimted ROM on it.
Now its stuck on the sony logo. Im not able to boot into recovery, but i can connect my phone in flashmode. HELP!
Ah u're here.
Are u sure ur bootloader unlocked?
Flash stock rom or custom kernel using flashtool. Ur phone not bricked yet.
Sent from my Nokia 3310 using Tapatalk 2
please help me sir
chepoz said:
Ah u're here.
Are u sure ur bootloader unlocked?
Flash stock rom or custom kernel using flashtool. Ur phone not bricked yet.
Sent from my Nokia 3310 using Tapatalk 2
Click to expand...
Click to collapse
Can you please send me the link for the stock rom, please
jiteshpabla97 said:
Can you please send me the link for the stock rom, please
Click to expand...
Click to collapse
Here http://forum.xda-developers.com/showthread.php?p=30322843
Sent from my Nokia 3310 using Tapatalk 2
thank you
chepoz said:
Here http://forum.xda-developers.com/showthread.php?p=30322843
Sent from my Nokia 3310 using Tapatalk 2
Click to expand...
Click to collapse
thankyou for the link, my phone is fine now, but can you tell me what i did wrong in installing the ROM? i cleared the dalvik cache etc. and it loaded 100% on my phone but it got stuck in the boot. can you guide me?
chepoz said:
Here http://forum.xda-developers.com/showthread.php?p=30322843
Sent from my Nokia 3310 using Tapatalk 2
Click to expand...
Click to collapse
chepoz, now my phone is unrooted, is my bootloader also locked, if not, how am i supposed to check it?
jiteshpabla97 said:
chepoz, now my phone is unrooted, is my bootloader also locked, if not, how am i supposed to check it?
Click to expand...
Click to collapse
Of course your phone is unrooted, these ftf files are unrooted
To check dial *#*#7378423#*#* -> Service Info -> Configuration -> Rooting Status. Please tell us what's there :good:
use custom kernel.
Sent from my Nokia 3310 using Tapatalk 2
Please help me
Please help me
I have brick my sony live with walkman, (Actually what happen)
i have a sony live with walkman, with rooted, Unclock bootloader (with test point method), and i install cm7.2 rom in that and the phone works fine, i want to try other roms for doing this i have wrongly deleted the system files using CMW.
After that my phone not start gives a bootloap on FXP logo, after that i flash stock (52) rom using flash tool. and all the things work fine my phone start normal. Then i rooted my live with walkman again and install cmw on that, after doing this i got a message to update stock rom to (62) latest sony software. i update over OTA and the update download sucessfully. then my phone switch off to install the updates. but when i switch on the phone then phone not starts, when i press power button then it show a green blinking lines, even charging is also not there, and when i connect my phone to usb then it shows phone connected in flashmode.
Please help me how i recover my WT19i
sorry for my bad english
Thanks in Advance
azim0106 said:
Please help me
I have brick my sony live with walkman, (Actually what happen)
i have a sony live with walkman, with rooted, Unclock bootloader (with test point method), and i install cm7.2 rom in that and the phone works fine, i want to try other roms for doing this i have wrongly deleted the system files using CMW.
After that my phone not start gives a bootloap on FXP logo, after that i flash stock (52) rom using flash tool. and all the things work fine my phone start normal. Then i rooted my live with walkman again and install cmw on that, after doing this i got a message to update stock rom to (62) latest sony software. i update over OTA and the update download sucessfully. then my phone switch off to install the updates. but when i switch on the phone then phone not starts, when i press power button then it show a green blinking lines, even charging is also not there, and when i connect my phone to usb then it shows phone connected in flashmode.
Please help me how i recover my WT19i
sorry for my bad english
Thanks in Advance
Click to expand...
Click to collapse
if the phone is connected in flashmode then y dont u try flashing the stock (52) again ??
MoonBlade said:
if the phone is connected in flashmode then y dont u try flashing the stock (52) again ??
Click to expand...
Click to collapse
i have flash stock (52) 2 or 3 times and it flash sucessfully but when i tried to on my phone by pressing power button, then green blinking shows and nothing happens, even when i tried to connect my charger to the phone, then also green led blinking again and again and nothing happen
what i do please help me
A FOTA brick maybe? Send it to service center dude
Sent from my Nokia 3310 using Tapatalk 2
azim0106 said:
Please help me
I have brick my sony live with walkman, (Actually what happen)
i have a sony live with walkman, with rooted, Unclock bootloader (with test point method), and i install cm7.2 rom in that and the phone works fine, i want to try other roms for doing this i have wrongly deleted the system files using CMW.
After that my phone not start gives a bootloap on FXP logo, after that i flash stock (52) rom using flash tool. and all the things work fine my phone start normal. Then i rooted my live with walkman again and install cmw on that, after doing this i got a message to update stock rom to (62) latest sony software. i update over OTA and the update download sucessfully. then my phone switch off to install the updates. but when i switch on the phone then phone not starts, when i press power button then it show a green blinking lines, even charging is also not there, and when i connect my phone to usb then it shows phone connected in flashmode.
Please help me how i recover my WT19i
sorry for my bad english
Thanks in Advance
Click to expand...
Click to collapse
Oh man, why did you do an OTA Update? Never ever do an OTA update with unlocked bootloader!
Look in the pinned thread by someguyfromhell, there's an unbricking guide
GokulStrikes said:
installed Serenity v3 Ultimate Edition., installed with 0 errors., now it got stuck with the sony logo., not even connecting with flashmode., don't know what to do., please help me out
Click to expand...
Click to collapse
Try reflashing ftf again. For that do the following steps:
1. Take battery off the phone
2. Wait 10 seconds
3. Open flashtool -> select the firmware -> click ok
4. When the window to put phone in flashmode appears, plug the battery in your phone again
5. Hold volume down and while holding connect phone to pc. Don't press anything else, just hold volume down
6. Wait until the flasing process has ended
And now you should be fine
Oh man each and every guide regarding unlocking bootloader advices u to Not to accept any OTA updates. Why did u do that?
please mark this thread with [SOLVED] tag if your ploblem is solved.
Hi!
I have a Sony Ericsson Xperia X10. I've installed a cm9 on my phone, and i like to know, how can i install cm7, or any other GB based rom on this rom. (i've installed fxp kernel as well)
Thank you for your help!
Just install Your desired ROM and flash proper kernel. That's all
Sent from my GT-I9100 using xda app-developers app
jakuburban said:
Just install Your desired ROM and flash proper kernel. That's all
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I forgot to make a backup from my stock system, and now i can't install any 2.3 based rom, because xrecovery don't allow that because of the ICS.
Is there a possibility to download stock rom and kernel, and flash it to the phone?
Why not. Search for the firmware for your phone and flash through flashtool following the on screen instructions. Cant ttell you exact build number because im an arc user using this now because the USB port is broken.
Sent from my X10i using xda premium
Q
tangosierra_ said:
Why not. Search for the firmware for your phone and flash through flashtool following the on screen instructions. Cant ttell you exact build number because im an arc user using this now because the USB port is broken.
Sent from my X10i using xda premium
Click to expand...
Click to collapse
So when i understand it good, then with flashtool i can flash any GB based rom on the ICS as well. Can i make it from a "zip" rom? When i flash a cm7, i don't need to change the fxp kernel.
Peet137 said:
So when i understand it good, then with flashtool i can flash any GB based rom on the ICS as well. Can i make it from a "zip" rom? When i flash a cm7, i don't need to change the fxp kernel.
Click to expand...
Click to collapse
No what im saying is that you wanna return to stock dont you. So I told you to flash a stock gb ftf using flashtool. But you do NOT flash custom Roms using flashtool, you boot into recovery and flash. And no, you can't turn a ftf into a zip
Edit; if I understood you correctly you wanted to flash cm7 ddont you... its simple... just flash the kernel through flashtool then boot into recovery and wipe everything and flash tthe rom. No need to flash stock first because the recovery is bundled in the kernel!
Sent from my X10i using xda premium
X10
tangosierra_ said:
No what im saying is that you wanna return to stock dont you. So I told you to flash a stock gb ftf using flashtool. But you do NOT flash custom Roms using flashtool, you boot into recovery and flash. And no, you can't turn a ftf into a zip
Edit; if I understood you correctly you wanted to flash cm7 ddont you... its simple... just flash the kernel through flashtool then boot into recovery and wipe everything and flash tthe rom. No need to flash stock first because the recovery is bundled in the kernel!
Sent from my X10i using xda premium
Click to expand...
Click to collapse
I solved the problem, the phone worked properly for months, but now i can't switch on the phone. The green led blinks, the phone vibrate one time and than nothing happens. I tried to flash some firmwares, but i can't made it. Flashtool wrote that flashing and nothing happens. I tried with Omnius as well, but the software can't read flash memory and can't flash anything. I think the phone is "hard bricked". Can anyone help me to save my phone?
It sounds like your battery is dead....
Sent from my MiUI-ed Xperia arc S
\ press thanks if I've helped /
tangosierra_ said:
It sounds like your battery is dead....
Sent from my MiUI-ed Xperia arc S
\ press thanks if I've helped /
Click to expand...
Click to collapse
Thank you for your advice, I will try it this afternoon with another battery.
Peet137 said:
Thank you for your advice, I will try it this afternoon with another battery.
Click to expand...
Click to collapse
I tried it with an LG GT540 battery, but the effect was the same. But with the original battery the phone didn't vibrate yet, just blink the red notification LED 3 times, and that's all. I tried to charge the battery (not with PC, with charger) and the phone did a strange thing. First when the charger attached, the RED LED blinking and after some time it turned to GREEN and stop blinking, just lighted. After some time the green LED turns off and then nothing lights.
In my environment nobody has X10 phone, that's why I can't try another original X10 battery, but I think with the LG battery must have work as well, when the battery is the failure.
Hello I did have had this problem aswell a while ago. I have had the phone in cwm recovery while doing a backup I fell asleep next day won't turn on only vibrate 1 time and 3 red blinks after it..
I really was desperate I tried many methods even flashed a kernel with offline charging which I thought was the trick but not that I realy now off.
I did notice i could get in recovery if I connect phone in flashmode and leave it till it reboots it's own should happen within 40 secs I guess.
After I saw that it could do that why it's not booting... I did some digging but I am not sure but I guess it's a file or binary (batterystats.bin) in data/system directory somewhere which keeps track of your battery and even if you plug new full battery it simply thinks it drained of the previous saved info of your old battery. (hope someone can confirm this because I didn't find any info such about but it should make sense if you ask me)
But in the end I used Sony PC companion to reapair it from there and it worked only one weird thing I needed to do was switching from USB power adapter to PC USB to have it connect in flashmode strangely.
And after that I only needed to root etc. again.
Sent from my GT-N7000
Answer
Danny23 said:
Hello I did have had this problem aswell a while ago. I have had the phone in cwm recovery while doing a backup I fell asleep next day won't turn on only vibrate 1 time and 3 red blinks after it..
I really was desperate I tried many methods even flashed a kernel with offline charging which I thought was the trick but not that I realy now off.
I did notice i could get in recovery if I connect phone in flashmode and leave it till it reboots it's own should happen within 40 secs I guess.
After I saw that it could do that why it's not booting... I did some digging but I am not sure but I guess it's a file or binary (batterystats.bin) in data/system directory somewhere which keeps track of your battery and even if you plug new full battery it simply thinks it drained of the previous saved info of your old battery. (hope someone can confirm this because I didn't find any info such about but it should make sense if you ask me)
But in the end I used Sony PC companion to reapair it from there and it worked only one weird thing I needed to do was switching from USB power adapter to PC USB to have it connect in flashmode strangely.
And after that I only needed to root etc. again.
Sent from my GT-N7000
Click to expand...
Click to collapse
Hi!
I have found the solution last time, and it works for a while, but i don't know how.
But now we were on holiday, and I forgot the charger, and the phone was switched off for 3 days, and the problem came out again.
I have an RC car which have a LiPO charger, I made an own "connector" to that and I charged the battery with that.
Could you please tell me, how you switched from "USB power adapter to PC USB" when the phone don't switch on?
Thanks!
Hi guys, i don't know how to solve a problem with my Sola. I read the recover soft-brick guide for xperia models but i can't solve it. I think i bricked.
When i try to turn on it's on Sony screen and there's nothing to do. I can use on flash mode and flash the kernel but the result is the same when i turn on. The led works like green in flash mode, or red when i finish the flash and the device is still connected. I have a locked bootloader, and all this happened when i wanted to restore a backup, i probably made a mistake: do a full wipe after that. I think that's is still in warranty, isnt' it? What can i do? There are some tips on the tutorial but i'm afraid to kill the battery or make other mistakes. Please help me guys.
And sorry for my bad english =(
brimbi said:
Hi guys, i don't know how to solve a problem with my Sola. I read the recover soft-brick guide for xperia models but i can't solve it. I think i bricked.
When i try to turn on it's on Sony screen and there's nothing to do. I can use on flash mode and flash the kernel but the result is the same when i turn on. The led works like green in flash mode, or red when i finish the flash and the device is still connected. I have a locked bootloader, and all this happened when i wanted to restore a backup, i probably made a mistake: do a full wipe after that. I think that's is still in warranty, isnt' it? What can i do? There are some tips on the tutorial but i'm afraid to kill the battery or make other mistakes. Please help me guys.
And sorry for my bad english =(
Click to expand...
Click to collapse
Have you tried to flash a stock firmware with flashtool?
elia222 said:
Have you tried to flash a stock firmware with flashtool?
Click to expand...
Click to collapse
Yes and flash is ok but when i turn on it's still on sony screen...i waited about 5 minutes. I tried with 6.1.1.B.1.54 and with 6.1.1.B.1.1.0 with same result. I know i have to wait after flash a stock firmware but i see it's too much time. Maybe because when i want to switch off i have to use hard reset (i mean with all 3 button). I don't know..thanks to reply in any case
brimbi said:
Yes and flash is ok but when i turn on it's still on sony screen...i waited about 5 minutes. I tried with 6.1.1.B.1.54 and with 6.1.1.B.1.1.0 with same result. I know i have to wait after flash a stock firmware but i see it's too much time. Maybe because when i want to switch off i have to use hard reset (i mean with all 3 button). I don't know..thanks to reply in any case
Click to expand...
Click to collapse
In any case, if you don't solve the issue by yourself, your phone is still in warranty (just don't say to the reparation service that you played with flashtool )
elia222 said:
In any case, if you don't solve the issue by yourself, your phone is still in warranty (just don't say to the reparation service that you played with flashtool )
Click to expand...
Click to collapse
Yep i hope. What can i do now? When i charge it turn on by itself and always on sony logo (but led is off)
Also when i flash and it's still on usb port the led is red but the device is off, i'm looking for a solution on RECOVER SOFT-brick thread but i don't know in which part am i.
brimbi said:
Yep i hope. What can i do now? When i charge it turn on by itself and always on sony logo (but led is off)
Also when i flash and it's still on usb port the led is red but the device is off, i'm looking for a solution on RECOVER SOFT-brick thread but i don't know in which part am i.
Click to expand...
Click to collapse
You tried with the Sony PC Companion/Update Service? It uses flashmode.. When I bricked my U i had relocked my bootloader and flashed via PC Companion... Worked for me :fingers-crossed:
Press thanks if I helped:good:
Try to start from the beginning, and follow the instructions carefully.
dotafan said:
You tried with the Sony PC Companion/Update Service? It uses flashmode.. When I bricked my U i had relocked my bootloader and flashed via PC Companion... Worked for me :fingers-crossed:
Press thanks if I helped:good:
Click to expand...
Click to collapse
But i have a locked bootloader, will i invalidate warranty? i'm going to try with pc companion =)
No it won't!!
If you were on a custom rom flash kernel/ftf via flashtool nd then use PC Companion:thumbup:
Sent from my ST25i using xda app-developers app
It works!!!!!!!!
dotafan said:
No it won't!!
If you were on a custom rom flash kernel/ftf via flashtool nd then use PC Companion:thumbup:
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
It works! My sola works now! Thank you guys! Thank you very much!
brimbi said:
It works! My sola works now! Thank you guys! Thank you very much!
Click to expand...
Click to collapse
Glad I could help :good: