hi guys i need your help A.S.A.P!!
I tried to restore my old version in my experia, because i got something very important written there that i need!
so i just entered the xrecovery and tried to restore..(not before i did backup)
the result now is the phone stuck at S.E's logo and keep rebooting till the logo.
when i tried to restore 1st, i waited some time and it didn't work (i dont remember what exactly it showed), then i tried to restore again and its writted:
E:Can't mount /dev/block/block/mmcb1k0)
(Device or resource busy)
Can't mount /sdcard
please guys i need you to help and to fix my phone and get my info from my old version, it is very important to me!
any help will be very appriciated, Thanks!!!!!
Painkille5 said:
hi guys i need your help A.S.A.P!!
I tried to restore my old version in my experia, because i got something very important written there that i need!
so i just entered the xrecovery and tried to restore..(not before i did backup)
the result now is the phone stuck at S.E's logo and keep rebooting till the logo.
when i tried to restore 1st, i waited some time and it didn't work (i dont remember what exactly it showed), then i tried to restore again and its writted:
E:Can't mount /dev/block/block/mmcb1k0)
(Device or resource busy)
Can't mount /sdcard
please guys i need you to help and to fix my phone and get my info from my old version, it is very important to me!
any help will be very appriciated, Thanks!!!!!
Click to expand...
Click to collapse
You have a faulty xrecovery installed mate!
Use SEUS to repair. Flashtool to root.
Once done, let me know. I have a safe, simple way of installing xrecovery (that works).
Also check http://forum.xda-developers.com/showthread.php?t=1054818
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Hi mate thanks alot for helping me!
Just to let you know..I used the Flashtool couple of times before and it always worked. (even it said that it worked when I did backup)
I still got some questions before I do what you told me:
When I will use SEUS to repair - will it install the stock rom on my device?
Do you think that the flashtool did backup my current version and data?
and..after I'll install xrecovery again..will I have my last "restores"? (will I be able to restore?) because the info there might be more expensive to me than the device itself.
Thanks alot again!! I will start working on it as soon as you will answer me please again A.S.A.P.
Hl
Painkille5 said:
Hi mate thanks alot for helping me!
Just to let you know..I used the Flashtool couple of times before and it always worked. (even it said that it worked when I did backup)
I still got some questions before I do what you told me:
When I will use SEUS to repair - will it install the stock rom on my device?
Do you think that the flashtool did backup my current version and data?
and..after I'll install xrecovery again..will I have my last "restores"? (will I be able to restore?) because the info there might be more expensive to me than the device itself.
Thanks alot again!! I will start working on it as soon as you will answer me please again A.S.A.P.
Click to expand...
Click to collapse
Seus will reinstall 2.3.3.
Flashtool doesn't create backup.
Yes, if u made a backup through xrecovery, you can restore it.
But b4 installation of xrecovery let me know
Hit thanks if helpful.
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
I ment that I used xrecovery and it worked to tell you that it was installked right, maybe something went wront but in first place it wasn't installed faulty.
and im looking for the SEUS, but i cant find any download for it, does the pc companion is good enough? (or maybe any 1 can give me a link for the download please?)
Painkille5 said:
I ment that I used xrecovery and it worked to tell you that it was installked right, maybe something went wront but in first place it wasn't installed faulty.
and im looking for the SEUS, but i cant find any download for it, does the pc companion is good enough? (or maybe any 1 can give me a link for the download please?)
Click to expand...
Click to collapse
You can use pc companion too.
Check these :
gadgets.apnafundaz.com/2010/07/downgrade-xperia-x10-to-original-generic-firmware-using-seus-new-debranding-method/
ucanphone.com/sony-ericsson/sony-ericsson-xperia-x10-update-service-165.html
www.livesony.com/forum/search.php?searchid=139999
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
i tried to conect the phone and do something with pc companion.
since its stuck boot loop (phone rebooting till SE's logo and again..)i couldnt do anything but "repair/ fix problems" option in pc companion when i conect my phone, press on back button and enter buttery..
it still didnt work because it says the there is still no avialable program to use in my phone..and to try later..
any help please???
im already getting alot of dmg since im without my phone please help
Painkille5 said:
i tried to conect the phone and do something with pc companion.
since its stuck boot loop (phone rebooting till SE's logo and again..)i couldnt do anything but "repair/ fix problems" option in pc companion when i conect my phone, press on back button and enter buttery..
it still didnt work because it says the there is still no avialable program to use in my phone..and to try later..
any help please???
im already getting alot of dmg since im without my phone please help
Click to expand...
Click to collapse
You should contact doomlord
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
who is doomlord?
Painkille5 said:
who is doomlord?
Click to expand...
Click to collapse
Dude!!!!!
He the who made this flashtool!!!
Search for his thread
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
milton.bain said:
Dude!!!!!
He the who made this flashtool!!!
Search for his thread
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Click to expand...
Click to collapse
He didn't make the flashtool but nevertheless he's a great dev.
Sent from my X10i using XDA App
aR_ChRiS said:
He didn't make the flashtool but nevertheless he's a great dev.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
ok guys he told me to flash the stock ftf
i have some questions, and i dont want to get on his nervs cuz he is pretty bussy..
he already told me that ftf is flashtool firmware file,and after some searching i understand that its a file that you put in the /firmware folder in the flashtool.
1.how will i be able to flash any file if my phone- not just stuck on SE's logo ,its keep rebooting!..?
2.what is UPS backup for PC??
3.how can i know how much batterty do i have or charging the phone? when i conect it to the charger the screen is still stuck on that loop so i dont even know if the phone is charning.
any 1?
Thanks!
Painkille5 said:
ok guys he told me to flash the stock ftf
i have some questions, and i dont want to get on his nervs cuz he is pretty bussy..
he already told me that ftf is flashtool firmware file,and after some searching i understand that its a file that you put in the /firmware folder in the flashtool.
1.how will i be able to flash any file if my phone- not just stuck on SE's logo ,its keep rebooting!..?
2.what is UPS backup for PC??
3.how can i know how much batterty do i have or charging the phone? when i conect it to the charger the screen is still stuck on that loop so i dont even know if the phone is charning.
any 1?
Thanks!
Click to expand...
Click to collapse
Ups backup is required for ur pc so that in case ur current goes off in midway you dont endup in bricking ur fone.
Yes ftf needs to be placed inside firmwire folder.
Open flashtool.re.keep it running.
Shut down your phone ,connect the data cable to phone,keep the back button pressed and insert the data cable to usb port. Your led will turn green. Goto flash and browse firmwire folder to select the ftf file.
Enjoy flashing!!!
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
milton.bain said:
Ups backup is required for ur pc so that in case ur current goes off in midway you dont endup in bricking ur fone.
Yes ftf needs to be placed inside firmwire folder.
Open flashtool.re.keep it running.
Shut down your phone ,connect the data cable to phone,keep the back button pressed and insert the data cable to usb port. Your led will turn green. Goto flash and browse firmwire folder to select the ftf file.
Enjoy flashing!!!
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Click to expand...
Click to collapse
"in case my current"=my pc turns off? quit the process in midway? i didnt really understand.
i cannot shut down my phone because its turning on and off automaticly till SE screen..
i figured out how to flash by conecting in without the battery and, press back button while puting on the battery (i hope it will work)
"flashtool.re.keep" -what this means?
but my main problem now is that i cant know what is my battery status (you need at least 50%- so i cant flush untill i find a solution for that..)
any help please??
Tnaks!!
Painkille5 said:
"in case my current"=my pc turns off? quit the process in midway? i didnt really understand.
i cannot shut down my phone because its turning on and off automaticly till SE screen..
i figured out how to flash by conecting in without the battery and, press back button while puting on the battery (i hope it will work)
"flashtool.re.keep" -what this means?
but my main problem now is that i cant know what is my battery status (you need at least 50%- so i cant flush untill i find a solution for that..)
any help please??
Tnaks!!
Click to expand...
Click to collapse
Yes you can enter flash mode by removing the battery and plugging it in, hold back button then insert the battery.
Sent from my X10i using XDA App
aR_ChRiS said:
Yes you can enter flash mode by removing the battery and plugging it in, hold back button then insert the battery.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
thats what i said i already know..
can you answer me to the rest of my questions please?
Painkille5 said:
"in case my current"=my pc turns off? quit the process in midway? i didnt really understand.
i cannot shut down my phone because its turning on and off automaticly till SE screen..
i figured out how to flash by conecting in without the battery and, press back button while puting on the battery (i hope it will work)
"flashtool.re.keep" -what this means?
but my main problem now is that i cant know what is my battery status (you need at least 50%- so i cant flush untill i find a solution for that..)
any help please??
Tnaks!!
Click to expand...
Click to collapse
I mean, ups is required so that evem your power supply/electricity goes off, you can carry on your work.
You can use external battery charger to charge your battery only.
Before flashing,pull out your battery...as you said.
Last resort: if all fails, go to se service center, they will repair it. They use the same pc companion. When i tried to flash my fone earlier,i was a dumb fella. I bricked it. Took it to service center and got it fixed.
Before flashing, watch doomlord's video of flasing at least 4 times. Then read the instructions and flash, keep the video running and pause at required places. This is how i flashed successfully on next instance.
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Hi mate if you think you backed up properly from xrecovery and it still in sd card, use card reader to retrieve it to pc. The file should be under sdcard/xrecovery/backup/xxxxx.zip. then try recover it from working phone with xrecovery. Hope this help n good luck.
Sent from my SO-01C using xda premium
milton.bain said:
I mean, ups is required so that evem your power supply/electricity goes off, you can carry on your work.
You can use external battery charger to charge your battery only.
Before flashing,pull out your battery...as you said.
Last resort: if all fails, go to se service center, they will repair it. They use the same pc companion. When i tried to flash my fone earlier,i was a dumb fella. I bricked it. Took it to service center and got it fixed.
Before flashing, watch doomlord's video of flasing at least 4 times. Then read the instructions and flash, keep the video running and pause at required places. This is how i flashed successfully on next instance.
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Click to expand...
Click to collapse
thank you very much!!!
when i will find a way to churge my battery ill tell you what ended up with this!
Thanks!!
Related
phone info:
model: x10i
firmwae: .435
baseband: .54
my phone kept on restarting even when i flashed it wid flashtool, then i used seus to flash it. n after the process got over, i unplugged my phone n pressed d powe button. it vibrated as it always does when it starts bt screen didnt turn up. so i removed d battery for few seconds n started d phone again. dis tym it vibrated as it always did n after 10 secs it started continuously vibrating continuously until i removed d battery. dis happened again n again. so i flashed it again wid flashtool bt same poblem exists. plzzzzz help :'(
DON'T KEEP FLASHING WITH FLASH TOOL THEN!
PEOPLE KEEP DOING THINGS LIKE THIS WITHOUT KNOWING WHAT THEIR DOING
Now connect the phone to SEUS and reflash stock Rom, I bet phone will be fine.
Edit: also ensure your battery has over 50% charge before connecting to update service. Just leave on charge for a while even if it keeps restarting.
Sent from my X10i using XDA App
jayman1986 said:
DON'T KEEP FLASHING WITH FLASH TOOL THEN!
PEOPLE KEEP DOING THINGS LIKE THIS WITHOUT KNOWING WHAT THEIR DOING
Now connect the phone to SEUS and reflash stock Rom, I bet phone will be fine.
Edit: also ensure your battery has over 50% charge before connecting to update service. Just leave on charge for a while even if it keeps restarting.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
tried it. bt it didnt help... continuously vibrating
thnx neways
nobody's gonna help me?
Tahoor_m said:
nobody's gonna help me?
Click to expand...
Click to collapse
Did your X10 break mechanically?
You should take it to the shop.
Hey I feel for you.
I never had that before but I would download pc suite 6
http://www.softpedia.com/progDownload/Sony-Ericsson-PC-Suite-Download-16854.html
install take battery out of phone.
select repair and choose your x10 model and follow the prompts. do not plug usb cable and battery until it tells you to.
now put in battery and hold down back button and plug usb in and hope it locks into flash mode. If it works the softwaree will repair your loader and install default rom and you'll be good to go.
Did you overdrive the cpu at all?
Let us know how you make it
good luck
Buddy,
if you want to use flashtools do it in the right way. First download the last firmware .67.
http://forum.xda-developers.com/showthread.php?t=936733
Copy .ftf file at firmware folder of flashtools.
flash your xperia
root it and everything should be fine....
don't forget to wipe personal data
thanx buddy, il try n let u knw
atintan said:
Buddy,
if you want to use flashtools do it in the right way. First download the last firmware .67.
http://forum.xda-developers.com/showthread.php?t=936733
Copy .ftf file at firmware folder of flashtools.
flash your xperia
root it and everything should be fine....
don't forget to wipe personal data
Click to expand...
Click to collapse
tried it, didnt help, thnx
phonedammed said:
Hey I feel for you.
I never had that before but I would download pc suite 6
http://www.softpedia.com/progDownload/Sony-Ericsson-PC-Suite-Download-16854.html
install take battery out of phone.
select repair and choose your x10 model and follow the prompts. do not plug usb cable and battery until it tells you to.
now put in battery and hold down back button and plug usb in and hope it locks into flash mode. If it works the softwaree will repair your loader and install default rom and you'll be good to go.
Did you overdrive the cpu at all?
Let us know how you make it
good luck
Click to expand...
Click to collapse
thanx buddy, il try n let u knw, u mean overclock?
tkymgr said:
Did your X10 break mechanically?
You should take it to the shop.
Click to expand...
Click to collapse
no. i described what happened abv
Tahoor_m said:
no. i described what happened abv
Click to expand...
Click to collapse
There's absolutely no reason why SONY ERICSSON UPDATE SERVICE SHOULDN'T WORK!
There must be something your doing wrong.
Or u may have broken your usb connector?
Sent from my X10i using XDA App
Can you boot into xrecovery?
Sent from my X10i using XDA App
Ok..been there.only difference being my x10 continuously vibrated when put it to charge. And never started.
Here is what I suggest.
1. Your x10 battery must be very low by now as u did multiple flashing. Take battery out for few min. Then put it in and keep phone for charging for couple of hours.even if green led doesn't light up.
2. Download SEUS not the pc suit. And install the firmware again.
3. If it doesnt help. Again run seus..and this time KEEP back button pressed for complete process.
Sent from my X10i using XDA App
jayman1986 said:
There's absolutely no reason why SONY ERICSSON UPDATE SERVICE SHOULDN'T WORK!
There must be something your doing wrong.
Or u may have broken your usb connector?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
SEUS bricked my phone.. its nt starting after updating from seus... i cnt boot into xrec mode
I ever got into ur shoe. My phone will just vibrate n green led on let me check my old post. Flashtool n seus wont do any good.
vu2ikl said:
Ok..been there.only difference being my x10 continuously vibrated when put it to charge. And never started.
Here is what I suggest.
1. Your x10 battery must be very low by now as u did multiple flashing. Take battery out for few min. Then put it in and keep phone for charging for couple of hours.even if green led doesn't light up.
2. Download SEUS not the pc suit. And install the firmware again.
3. If it doesnt help. Again run seus..and this time KEEP back button pressed for complete process.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
ok.. will give it a try... thnx
hierarchy666 said:
I ever got into ur shoe. My phone will just vibrate n green led on let me check my old post. Flashtool n seus wont do any good.
Click to expand...
Click to collapse
wot did u do den??
Tahoor_m said:
wot did u do den??
Click to expand...
Click to collapse
I felt what people who bricked their X10i went through. Personally i bricked my X10i just 20minutes out from the box (package) I spent whole night reading to unbrick it. lol. So, here it is. Im just trying to help. So i reupload that important file Download Link -> http://hotfile.com/dl/108230277/6d80..._F3v3.rar.htm Step by Step Guide -> http://forum.xda-developers.com/showthread.php?t=711907 Please follow from Step 0 After that you can run Flashtool and download rom with baseband .67 because u will be running android 1.6 old. Please reply the outcome. Thanks.
So whats the outcome?
folks! I bricked my phone while updating it from seus and reason was dat MY USB CABLE WAS LOOSE AND MY PHONE GOT DISCONNECTED nw on restart it shows sony ericcson logo just for a second and den shows a pic where a triange(and inside it an exclamation mark is shown) is placed over a phone's picture.
I've tried seus and flashtool and both detect my phone as long as that sony ericson logo is shown and dats just for a second.
I was using cwm recovery and had made a backup of the custom rom. And nw i cant acces my cwm coz the se logo flashes so shortly dat i am nt able to open cwm.
NEED HELP GUYS!!!
Also i want to know dat can the sony ericsson service center help me..by software installation or by changing the hardware which stores the flash memory. Plz help me i'm nt ready to throw this phone away.
Thanks.
Use FlashTool to FLASH.
I have made a guide with links included. Just search for :
2.1.1.A.0.6 GREEK .ftf
Sent from my U20i using XDA Premium App
leajian said:
Use FlashTool to FLASH.
I have made a guide with links included. Just search for :
2.1.1.A.0.6 GREEK .ftf
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
Thanks buddy.. But Flash tool does not detect my device. I've installed gordons gate.. But still.. I think Flash tool does not get enough time to detect my phone. I hear a usb connection sound and SE logo flashes for less then a second and i hear a usb disconnection sound den the ! is seen and den phone shuts down.
Dinesh1389 said:
Thanks buddy.. But Flash tool does not detect my device. I've installed gordons gate.. But still.. I think Flash tool does not get enough time to detect my phone. I hear a usb connection sound and SE logo flashes for less then a second and i hear a usb disconnection sound den the ! is seen and den phone shuts down.
Click to expand...
Click to collapse
Don't give up yet. I know this problem. Uninstall Gordon's Gate. Install Sony Ericsson PC Companion (again if installed) and try using FlashTool again. This error on your phone means that the files are corrupted, maybe because a flash you tried was interuppeted unexpectedly. Your phone is not dead yet (probably your USB port has some problems and caused all this), it must be restorable.
Try and tell me if it worked.
Sent from my U20i using XDA Premium App
No dont throw it just yet, I had almost the same. Ut unsure what caused it,it was 1st time flashing it, but spent 24hrs looking though solutions but it worked, similar to what lea sez...a new dl of sony comp and re-updated it using there latest u.d. Then used flashtool and reinstalled xrecovery with it as it stopped letting me open it..took a few trys but ws ok once sony companion recd my phone an reinstalled xrec.the update in sony comp I think wasnt in clear view its in the support stn..went back to stock 2.1.
Sent from my U20i using XDA App
leajian said:
Don't give up yet. I know this problem. Uninstall Gordon's Gate. Install Sony Ericsson PC Companion (again if installed) and try using FlashTool again. This error on your phone means that the files are corrupted, maybe because a flash you tried was interuppeted unexpectedly. Your phone is not dead yet (probably your USB port has some problems and caused all this), it must be restorable.
Try and tell me if it worked.
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
Didnt worked man... So i had to choose the last option left ... the se service guyz... nw it back on the track.
My phone was just rooted and did factory reset yesterday.
After that my phone is crazy as many functions not working anymore,
Abyss ways to save my phone?
WiFi not working
Screen lock not working
Usb to pcbs can be detected but not able to connect
Home button not working
t-up
xksimon said:
t-up
Click to expand...
Click to collapse
device ?
things you did exactly ?
try a seus reset ...
matmutant said:
device ?
things you did exactly ?
try a seus reset ...
Click to expand...
Click to collapse
Eh? It is x10i forum, of coz i am using x10 mini pro
I told what i did in the first post already.... check it out plz
What is seus reset by the way.
If you can goto xrecovery install any custom rom that works with stock kernel...and later after installing custom rom use pc companion and flash the fresh stock rom
xksimon said:
Eh? It is x10i forum, of coz i am using x10 mini pro
I told what i did in the first post already.... check it out plz
What is seus reset by the way.
Click to expand...
Click to collapse
hmmm right, it's in title
you dunno SEUS ?
read miniCM7 miniFAQ, answers to your Q is there (in "usefull links" post)
Yashu1019 said:
If you can goto xrecovery install any custom rom that works with stock kernel...and later after installing custom rom use pc companion and flash the fresh stock rom
Click to expand...
Click to collapse
I didn't install xrecovery before the wiping, so there are nothing that i could do even i had xrecovery
How can i install custom rom? Since it is my first smart phone.
Moreover, right now the phone can't connecting to a computer at all.
I checked a lot of topics that required the phone is able to connect to a pc,
In order to install any custom roms.
matmutant said:
hmmm right, it's in title
you dunno SEUS ?
read miniCM7 miniFAQ, answers to your Q is there (in "usefull links" post)
Click to expand...
Click to collapse
Sorry i am new to this forum, can't found the topic that you are talking about.
Could you mind give me a direct link? Thank you!
the two threads on top of where you posted your thread ...
the ones with written "Read Before Asking Please"...
http://forum.xda-developers.com/showthread.php?t=1266911
the usefull links post : http://forum.xda-developers.com/showpost.php?p=17651751&postcount=3
If ur totally stuck officialy unbrick ur phone (will delete all PHONE memory,not memory card)
1-download and install sony erricson pc companion from official site.
2-click on support zone
3-click on update software
4-click on repair phone
5-accept agreements etc.
6-choose phone type (from what I understand your is x10 mini pro,like me.
7-start installing
8-phone should bee like the day you bought it
P.S:root is removed so if u want u should root again
But boot loader stays unlocked(if u had unlocked it)
If what I said help better click the thanks button
Sent from my U20i using XDA
LukBoy99 said:
If ur totally stuck officialy unbrick ur phone (will delete all PHONE memory,not memory card)
1-download and install sony erricson pc companion from official site.
2-click on support zone
3-click on update software
4-click on repair phone
5-accept agreements etc.
6-choose phone type (from what I understand your is x10 mini pro,like me.
7-start installing
8-phone should bee like the day you bought it
P.S:root is removed so if u want u should root again
But boot loader stays unlocked(if u had unlocked it)
If what I said help better click the thanks button
Sent from my U20i using XDA
Click to expand...
Click to collapse
Eh....
WiFi not working
Screen lock not working
Usb to Computer can be detected but not able to connect
Home button not working
That's mean even my computer has installed pc companion, The computer can't read the phone correctly, so it is impossible to recovery in this way
Yes i don't mind my phone becoming unrooted
LukBoy99 said:
If ur totally stuck officialy unbrick ur phone (will delete all PHONE memory,not memory card)
1-download and install sony erricson pc companion from official site.
2-click on support zone
3-click on update software
4-click on repair phone
5-accept agreements etc.
6-choose phone type (from what I understand your is x10 mini pro,like me.
7-start installing
8-phone should bee like the day you bought it
P.S:root is removed so if u want u should root again
But boot loader stays unlocked(if u had unlocked it)
If what I said help better click the thanks button
Sent from my U20i using XDA
Click to expand...
Click to collapse
If your provider didn't change the software on your phone too much, this will work. It will work best if you leave your phone disconnected from your pc until step 7
SmG67 said:
If your provider didn't change the software on your phone too much, this will work. It will work best if you leave your phone disconnected from your pc until step 7
Click to expand...
Click to collapse
Usb to Computer can be detected but not able to connect
U should try to connect to flash mode what I did when it was rebooting on self
1-removed battery till step 7
2-quickly insert it (dont even use back cover till ur done)then hold back button and plug the cable in ur phone untile led flashes(plug usb in pc b4 starting this)
Wish this helps
Sent from my U20i using XDA
If non of above helps ur last solution would be flashing stock kernel (which can be found on xda) with flashtool with the battery quick in and backbutton method but youll need ur bootloader unlocked
Sent from my U20i using XDA
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
did you try flashing any stock ftf rom file using flashtool?
or repair using PCC or SEUS.
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
Repair with Pc Companion or Update Service
Instructions:
Hold your back button (3button) , then connect with ur USB to x10 untill the LED light appear, after that wAAAit ur cpu install ur driver, then go pcc update ur phone, if it pop out that u have last software just continue it , AAAfter that all, ur bricked x10 hAAAve been repair
Hope helps
Superman™
It wont boot into flash mode or recovery , i know how to flash etc but i cant get it into flashmode (downloading mode) . Pc not picking it up either
Thanks anyways
Any other ideas
gordonx10i said:
It wont boot into flash mode or recovery , i know how to flash etc but i cant get it into flashmode (downloading mode) . Pc not picking it up either
Thanks anyways
Any other ideas
Click to expand...
Click to collapse
Then I guess you cant do anything about it
Also if if it wont boot in recovery or to the rom I dont think SE people can know that its running unofficial roms
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
Hey gordonx10i, did you try with "x10_2.3_aro"?
Try flash by this, then try to start xRecovery into SEXperia
Check the following XDA Post: http://forum.xda-developers.com/showthread.php?p=16118511
Directly link provided by efx_d3
http://mir.cr/0OIDEZNA
Problem is device not even seen by pc anymore it so dunno how to get it into flash mode is there perhaps not a script exploit that can be run from sd card ......
Sent from my GT-P7500 using xda app-developers app
How to get back to stock even with a broken USB
While I think this might help you :
http://forum.xda-developers.com/showthread.php?t=1054818
Take care mate !
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
gordonx10i said:
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
THeLogiC said:
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
Click to expand...
Click to collapse
+1 on that
Always works
If you had ferakernel, you don't even need to hold back lol
Sent from my Xperia X10 using xda premium
gordonx10i said:
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
ARO 2.3.3 kernal saved my life bro, i think you'll have the same luck too go ahead with that :good:
Unbricked from se logo screen
THeLogiC said:
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
Click to expand...
Click to collapse
thanx dude..
I have da same problem as gordonx10i
It worked for me from your firmware collection :good:
raghava_teja said:
thanx dude..
I have da same problem as gordonx10i
It worked for me from your firmware collection :good:
Click to expand...
Click to collapse
Glad it helped
Sent from my X10
does this method can fix my problem also?
also got stuck bootloader,
because of trying to unlock bootloader..
i guess its my fault, tryng to unlock while im in custom rom?
currently im downloading 2.3.3 stock rom,
and will try to flash it later..
ive tried already PCC and SEUS and still no luck.. (no available updates) =(
THeLogiC said:
Glad it helped
Sent from my X10
Click to expand...
Click to collapse
wow it works.. thnx! ive downloaded the rom in your link!! thnx a lot! ive managed to fix my fone.. =)
thanks!!
jrennald said:
wow it works.. thnx! ive downloaded the rom in your link!! thnx a lot! ive managed to fix my fone.. =)
thanks!!
Click to expand...
Click to collapse
No problem again
Sent from my X10
THeLogiC said:
No problem again
Sent from my X10
Click to expand...
Click to collapse
Remember guys X10 can't be bricked... it can always be unbricked and that too very easily all required is bit of patience to go through the forum
Sent from my Transformer TF101 using xda app-developers app
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
6/030/2013 18:30:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
16/030/2013 18:30:20 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Use SEUS to restore Download from:
SEUS
Dont forget to pull of your battery for 4 seconds, for turn off your phone before connect your phone.
gnickz0r said:
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Click to expand...
Click to collapse
Press home and power buttons together, it will restart the phone, then start pressing the back-button repeatedly to get back into recovery and restore your previous rom from there. (Come to think of it, following my last paragraph below, you probably don't have recovery on your phone anymore, so, as Rempty mentioned above, repairing with SEUS or PC Companion would be the start to recover your phone to a usable state,.)
The error flashtool gave you is because you didn't unlock the bootloader and didn't change the kernel on your phone. It can't flash any non-sony kernel on a locked bootloader.
What is this 'update.zip' you're talking about? Most full roms have more informational names to distinguish between different zips. An update.zip is usually only for hotfixes to ROMS already flashed, and not a complete ROM.
Thanks a lot guys. I solve my problem with SEUS.
Phone completely formated.
Love you guys
Hey guys I hve instaled xrecovery and minicm9 too on my x10 mini pro I hve wiped chache,etc nd when I reboot , it hangs on SE logo plz help me
SE logo?? You forgot to install nAa kernel, do you unlock bootloader??, remember that minicm9 is not for stock kernel.
Sorry for my bad english
Sent from my iPhone6 using xda business
W'll when I try to unlock the bootloader it gives error can u plz help me
william chauhan said:
W'll when I try to unlock the bootloader it gives error can u plz help me
Click to expand...
Click to collapse
use flash tool to unlock ur bootloader
make sure ur fone is rooted
Sent from my U20i using xda premium
I'm already using flashtool bt it's nt working
william chauhan said:
I'm already using flashtool bt it's nt working
Click to expand...
Click to collapse
What's your phone's build date? Ex.11w37(written on the stick placed on the back )
Sent From My BEAST , I mean X8
My build no. Is 2.1.1.A.0.6
Plzz help me..
Plz help me.. I try to unlock the boot loader .. and the phone bricked !!!! what am i going to do??
i try the PC COMPANION but my phone did not detect it..
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Hey guys I used the flashtool to unlock the bootloader and I also followed the steps too but problem is when the phone was rebooted it didnt read the sim card now what should I do ? Please help
thas911 said:
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Click to expand...
Click to collapse
my phone is in HARD BRICKED.. my phone is dead the phone didnt charge and totally dead.. what should i do?? help me??
i also have a hard bricked,even when i put it to charge the phone its not blink the led
help