hello, my phone stacked at the Sony Ericsson logo and i cant repair it from PC companion and now i try to fix it with flash tool and i search for any firmware. please give some links or try to help me.
Explain more how did u get bootloop??????
What u were doing??? Which ROM??
---------- Post added at 10:17 PM ---------- Previous post was at 10:12 PM ----------
May be this could help u.........
http://forum.xda-developers.com/showthread.php?t=1125587
i wanted to install my phone from new and i clicked on clean in flash tool and then my phone got stacked. my phone had the newest version. I tried also seue and it said that i have the newest firmware and i cant fix it. Now i try to fix it with flashing new firmware.
opayal said:
i wanted to install my phone from new and i clicked on clean in flash tool and then my phone got stacked. my phone had the newest version. I tried also seue and it said that i have the newest firmware and i cant fix it. Now i try to fix it with flashing new firmware.
Click to expand...
Click to collapse
in SEUS you have to click the "repair" option, that should do it
I have the same problem.
I've rebooted from CWM recovery after a new rom installation, and it told me that the recovery was broken.
So I choose to repair it but it didn't work.
I tried few times (5 or 6) and, at the end, I decided to switch off the phone and reboot.
Since then my phone is stacked on the Sony Ericsson Logo, it'is impossible to connect it using the "back" button and it is impossible to use SUSE properly I guess 'cause I tried but it does not recognize the phone.... I tried with an hard reset (Home+power) but it shuts down and then again it stacks.
Obviously the back button does not allow me to go on recovery mode....
My sister will kill me!
Im on the same boat (looking for fw)
looking for 2.1 for x10a (e10a) ver 2.0.A.0.504
all hosted in m3g4upl04d/m3g4sh4r3 are lost
Regards
download E10a firmware and flash it using flashtools
romolito said:
I have the same problem.
I've rebooted from CWM recovery after a new rom installation, and it told me that the recovery was broken.
So I choose to repair it but it didn't work.
I tried few times (5 or 6) and, at the end, I decided to switch off the phone and reboot.
Since then my phone is stacked on the Sony Ericsson Logo, it'is impossible to connect it using the "back" button and it is impossible to use SUSE properly I guess 'cause I tried but it does not recognize the phone.... I tried with an hard reset (Home+power) but it shuts down and then again it stacks.
Obviously the back button does not allow me to go on recovery mode....
My sister will kill me!
Click to expand...
Click to collapse
1st, have you tried connecting your phone via flash mode to flashtool ? Can flashtool detect it ? Because, if your phone can enter sony logo, I think SEUS /flashtool will be able to detect it as well..
In case SEUS still fails but flashtool is able to connect,, try to install nAa latest kernel (I suggest to redownloading it), since it contains recoovery as well..
Hopefully that helps..
Sent from my U20i using XDA
opayal said:
hello, my phone stacked at the Sony Ericsson logo and i cant repair it from PC companion and now i try to fix it with flash tool and i search for any firmware. please give some links or try to help me.
Click to expand...
Click to collapse
Don't worry my friend. Just give me some time to find an X10 Mini and I'll provide you an .ftf.
Related
hi guys dis s d tutorial for flashing d stock firmware on a dead or bricked x10 mini.....
NOTE: THIS PROCESS WILL RELOCK UR BOOTLOADER AND ROOT WILL BE GONE
Step 1: Download Sony Ericsson update service software (SEUS) http://www.sonyericsson.com/cws/supp...ro?cc=gb&lc=en
Step 2: Install it and open it
Step 3: Now do a hot reboot on the device by pressing and holding both the menu and power keys at the same time
Step 4: Without wasting even a single second press and hold the back button and connect your USB cable while holding Back
Step 5: Do not release the back key until the SEUS identifies your device. When it identifies your device, the update option will appear on your screen.
(It may say that you have a latest firmware already, but you click repair anyway and after the operation starts, You may release your back key.
Step 6: Wait until the update process gets finished and reboot your device now you will have a stock firmware with locked bootloader
feel free to hit thanks if this helped you..
kudo for posting this, but many spelling mistakes and excessive use of txt speak like "ur, u, diz" you may wanna rewrite the post
---------- Post added at 10:14 AM ---------- Previous post was at 09:17 AM ----------
Step 1: Download Sony Ericsson update service software (SEUS) http://www.sonyericsson.com/cws/sup...ject/pccompanion/xperiax10minipro?cc=gb&lc=en
Step 2: Install it and open it
Step 3: Now do a hot reboot on the device by pressing and holding both the menu and power keys at the same time
Step 4: Without wasting even a single second press and hold the back button and connect your USB cable while holding Back
Step 5: Do not release the back key until the SEUS identifies your device. When it identifies your device, the update option will appear on your screen.
(It may say that you have a latest firmware already, but you click repair anyway and after the operation starts, You may release your back key.
Step 6: Wait until the update process gets finished and reboot your device now you will have a stock firmware with locked bootloader
Hopefully, this will be easier to understand (spelling, grammer & punctuation fixed)
thanx for the opinion will repost it soon
You are wrong, restore a firmware does not restore the lock of the bootloader. Your bootloader keeps unlocked always (you need s1tool to relock)
Sent from e10a using xda premium
if the phone is bricked... will the above steps work..??
i want to flash my stock kernel with nAa kernel and install MiniCM7..
Please someone reply... thanks in advance..
karthiks.840 said:
if the phone is bricked... will the above steps work..??
i want to flash my stock kernel with nAa kernel and install MiniCM7..
Please someone reply... thanks in advance..
Click to expand...
Click to collapse
any one will answer this question ??
matthias1203 said:
any one will answer this question ??
Click to expand...
Click to collapse
The phone at least has to be able to boot in flash mode. If it's "more bricked than that" it shouldn't work...
Missing "REPAIR" option in SE Update Service
SE Update Service ver.: 2.12.5.57 (last)
Kernel: nAa kernel
ROM: MiniCM7
There is no "REPAIR" option (see attachment).
It was in older version only? Who knows?
Or does anyone know another way to get back to stock ROM and kernel from the kernel and naa MiniCM7 ROM?
I claim my phone. So I need the original state.
THNX a LOT!
The repair option in PC Companion is a bit hidden, mine is in dutch but i try to show you the steps you have to take.
See screenshot 1, support zone, click start
See screenshot 2, update phone software, click start
See screenshot 3, phone not found (or you have the latest firmware), click the repair link
The repair link is not there if you choose update from the mainscreen in SEUS.
This desnt work. I have got almost standard conditions
SmG67 said:
The repair option in SEUS is a bit hidden, mine is in dutch but i try to show you the steps you have to take.
See screenshot 1, support zone, click start
See screenshot 2, update phone software, click start
See screenshot 3, phone not found (or you have the latest firmware), click the repair link
.
Click to expand...
Click to collapse
Your screenshots are from Sony PC Companion
But there is talk about Sony Ericsson update service software (SEUS)
showstopper1 said:
Step 1: Download Sony Ericsson update service software (SEUS) http://www.sonyericsson.com/cws/supp...ro?cc=gb&lc=en
Step 2: Install it and open it
Click to expand...
Click to collapse
Nevertheless I try your way. I found "Repair" link. I walk thru all steps, but It shows "No software available" (it was looking more like "update" then "repair") (see attachment). And then redirect me to homepage of PC Companion (with no chance to Repair).
I have got standard conditions:
Sony XPERIA X10 mini (E10i)
with
Kernel: nAa kernel (last version)
ROM: MiniCM7 (last version)
PC Companion Version: 2.10.053 (last)
SE Update Service (SEUS) Version: 2.11.12.5 (last)
THIS SOLUTION STILL DOESNT WORK FOR ME (I THINK FOR ANYBODY WITH SAME CONDITIONS)
Please help. I'm starting to be clueless :/
Thanx a lot.
I have edited my post, it is PC Companion ofcourse...
What steps did the repair option make you take? with me it is:
1. you will lose all your data, agree...
2. computer will be prepared, choose your model - x10 mini
3. it will tell you how to enter flash-mode (unplug, shut down, press back, plug in)
4. it will download the firmware and flash it to the phone
5. disconnect the phone and restart
as far as i know, the repair option doesn't care what phone you have, or what software it runs, it trusts you to select the right model, and itself to find the right firmware for that, no other checks are performed, it just flashes it.
PS: I was on nAa-08 and GingerDX this time, especially for this post i have flashed back to stock. i have bricked my phone a few times when i tried flashing custom roms and it always worked this way for me, even if you are on stock firmware it will still flash it again.
is it possible that my mobile SIM is not recognized after bootloader relock in s1tool?
niksa09 said:
is it possible that my mobile SIM is not recognized after bootloader relock in s1tool?
Click to expand...
Click to collapse
If it was still working after you unlocked the bootloader, then relocking it probably won't break it.
If it stopped working after you unlocked the bootloader, then relocking might restore it.
In any case make sure you're on stock firmware before you relock.
guys i have a bricked mini with stocked firmware i connect it with seus and it says that i have the latest firmware but it doesnt appear the repair button ! Whats can i do /
marios199546 said:
guys i have a bricked mini with stocked firmware i connect it with seus and it says that i have the latest firmware but it doesnt appear the repair button ! Whats can i do /
Click to expand...
Click to collapse
leave your phone unplugged when you choose update, and only plug it in when it asks to connect in flashmode. It can't recognise your phone when it's unplugged and should give you the repair option, if SEUS doesn't do that, download PC Companion, that will do it.
but the pc companion need the phone to be turned on and my phone doesnt turn on
---------- Post added at 10:35 AM ---------- Previous post was at 10:32 AM ----------
i follow your instructions and again nothing
marios199546 said:
but the pc companion need the phone to be turned on and my phone doesnt turn on
---------- Post added at 10:35 AM ---------- Previous post was at 10:32 AM ----------
i follow your instructions and again nothing
Click to expand...
Click to collapse
So, what is wrong with your phone then? is your battery dead?
When you start PC Companion and you don't have your phone plugged in, you do the following:
Choose update
It will say: Phone not recognised (or something like that) and in that dialog there is a little blue link saying Repair. Click on it.
It will tell you you will lose all user data, accept that
It will ask you to select your phone-model from a list
It will download the firmware for that phone.
It will ask you to connect your phone in flash-mode (press the back-button, plug in the usb-cable, the led will turn green, the dialog will disappear and it will start flashing.
No need to turn on your phone at all, but it needs some charge in the battery in order to successfully complete the flash (normally a charge of over 50% is recommended to be safe)
please help me find goog firmware for my xperia mini (e10i)
my xperia mini bricked after i tried to flash firmware but it still boot to flashmode. please help me find a better firmware to restore my phone!
I need to flash my X10 Mini, but I can't find the firmware for It anywhere with a working link. Anyone that still have the file and willing to share?
There are only plenty of links to sites that are down
I tried to install MiniCM7-2.1.9-robyn on the phone and then afterwards it just won't start anymore, so i need to flash it and then use SEUS to restore it.
UPDATE!
I found everything and fixed everything I needed by just flashing It with a stock kernel.
Just use the Repair option in Pc Companion.
Here
leajian said:
Just use the Repair option in Pc Companion.
Click to expand...
Click to collapse
wont work because I can't even get into the menus, I turn it on and It gets stuck on a screen with little backlight, but no SE logo
TrissyGE said:
Here
Click to expand...
Click to collapse
I'm not looking for how to do It..... Read the question before you post. I appreciate you trying to help, but at least understand what the question Is first.
I'm looking for the firmware for the flashtool so I can flash my device (.ftf file)
They guides that teaches you how to fix a bricked phone got links to megaupload (that got shutdown not long ago) and multiupload (also got shutdown) for the firmware I'm looking for.
If you can't turn the phone on, then flashtool won't help you. You have to able to turn the phone on to get to download mode for flashtool, or Pc Companion, or SEUS to do their thing.
If your phone doesn't turn on, you've got a hard brick. Which is bad.
Sent from my U20i using xda premium
Ticklefish said:
If you can't turn the phone on, then flashtool won't help you. You have to able to turn the phone on to get to download mode for flashtool, or Pc Companion, or SEUS to do their thing.
If your phone doesn't turn on, you've got a hard brick. Which is bad.
Sent from my U20i using xda premium
Click to expand...
Click to collapse
No, it can be a hard brick, he didn't do anything to put his device in danger (from what he claims).
He just needs a stock .ftf file for mini, which I was planning to do in the past, but did only for the pro... I am sorry my friend... There is only one solution -to make the ftf file yourself, which is something very confusing and you are going to need another mini to do this. But don't get your hopes down, it is possible, at least...
leajian said:
No, it can be a hard brick, he didn't do anything to put his device in danger (from what he claims).
He just needs a stock .ftf file for mini, which I was planning to do in the past, but did only for the pro... I am sorry my friend... There is only one solution -to make the ftf file yourself, which is something very confusing and you are going to need another mini to do this. But don't get your hopes down, it is possible, at least...
Click to expand...
Click to collapse
The phone it self comes to a point where there is some light on the screen, but i can't see the SE Logo anymore. I can charge the phone without problem from what it looks.
If I can get hold of another mini how can I make the ftf?
What did I do to achive this problem??
I tried to install MiniCM7-2.1.9-robyn and it ended with a phone that got stuck during boot. Then I got to a guide where someone said "Hardreset the device and use SEUS", but SEUS always says that my phone has the latest software.
TazBaz said:
The phone it self comes to a point where there is some light on the screen, but i can't see the SE Logo anymore. I can charge the phone without problem from what it looks.
If I can get hold of another mini how can I make the ftf?
What did I do to achive this problem??
I tried to install MiniCM7-2.1.9-robyn and it ended with a phone that got stuck during boot. Then I got to a guide where someone said "Hardreset the device and use SEUS", but SEUS always says that my phone has the latest software.
Click to expand...
Click to collapse
As far as SEUS is concerned, you DO have the latest software. It just doesn't realise that what you have doesn't work. Select the option to reinstall the software.
Sent from my U20i using xda premium
Ticklefish said:
As far as SEUS is concerned, you DO have the latest software. It just doesn't realise that what you have doesn't work. Select the option to reinstall the software.
Sent from my U20i using xda premium
Click to expand...
Click to collapse
Only one problem here, I don't have the option to reinstall the software at all after it says that I already have the latest software.
Can it be that the option is no longer there depending on SEUS version?
TazBaz said:
Only one problem here, I don't have the option to reinstall the software at all after it says that I already have the latest software.
Can it be that the option is no longer there depending on SEUS version?
Click to expand...
Click to collapse
There is a repair option in PC Companion, see it, please! The repair option on PC Companion is Support Zone --> Update --> Repair.
BTW, to hard reset :
1. Turn the phone off
2. Press the POWER button
3. Press and hold home key aprox 3 seconds
4. The hard reset is starting.
Hello there!!! I had the same problem just yesterday and I was about to get crazy in order to solve it...and then I found this post which was definately useful!!!! Just follow every single step and it will get back to work...btw I still can't flash the nAa-11 kernel with flashtool...it keeps on saying error and the flashing doesn't work
http://forum.xda-developers.com/showpost.php?p=20251565&postcount=8
leajian said:
There is a repair option in PC Companion, see it, please! The repair option on PC Companion is Support Zone --> Update --> Repair.
BTW, to hard reset :
1. Turn the phone off
2. Press the POWER button
3. Press and hold home key aprox 3 seconds
4. The hard reset is starting.
Click to expand...
Click to collapse
I will try that thanks, but you need to hard reset before the repair with PC Companion?
I managed to find the stock kernel so now I'm starting the device, but I get a SE logo and then It shuts off.
One problem when I try to repair on step 2 (prepare step) I get a error unable to start or phone update update components. (the pc companions is installed with the newest version)
hi all
im having a bit of trouble i have an xperia x10 and i recently flashed it wit feralab and now the phone is stuck at the SE log iv tryed reflashing with azuzu downgrade but nothing happens it stays at the SE logo i could do with some lamens terms on this one please as i dont understand how to get my phone working again please help ...
hey buddy, use the search next time...
http://forum.xda-developers.com/showpost.php?p=24770795&postcount=2119
Dont stress mate, its not a problem.
When all else fails you can always go back to the stock rom and start flashing again from there. There are a couple of ways to do this...
SEUS (Sony Ericsson Update Service) find it here...
http://sony-ericsson-update-service.en.uptodown.com/
Or PC Companion, here...
http://www.sonymobile.com/gb/tools/pc-companion/
Hope this helps,
Have fun
You should see doomkernel logo then xperia logo.Looks like you didnt flash anything.....
Sent from my x10i using xda premium
maybe he is on stock kernel
my phone is bricked
can i still flash if i dont have usb debugging enabled?
Damn guys, why don'y you use the SEARCH BUTTON before posting...
Try to flash it with PC Companion to repair to stock rom then you'll be able to flash again another rom...
You can also use Flashtool to make a lot of thing (Unlock, flash, root... etc..)
Hope it helps
just use flashtool to flash the stock firmware and enjoy!
I am having a similar problem. Using this guide to unlock my bootloader, my X10 stucks at the "Sony Ericsson" logo. I managed to do the kernel downgrade and the actual unlocking (using the setools2 batch file). After this I can't shut down my phone, which means I can't get into flash mode.
Any help?
---------- Post added at 05:51 PM ---------- Previous post was at 04:58 PM ----------
jex123 said:
I am having a similar problem. Using this guide to unlock my bootloader, my X10 stucks at the "Sony Ericsson" logo. I managed to do the kernel downgrade and the actual unlocking (using the setools2 batch file). After this I can't shut down my phone, which means I can't get into flash mode.
Any help?
Click to expand...
Click to collapse
I finally made it into flash mode like this:
remove battery
connect X10 to PC
hold the back button and insert battery
After I reinstalled stock rom with SEUS my SIM is not recognised. I tried lots of related topics but nothing worked.
UPDATE:
SEUS does not seems to reset the bootloader or kernel. Use PC Companion like suggested here.
X10i stuck at SE logo after downgraded it by using azuzu flashtool
hi, I am new here. I need a solution of my phone, model x10i. It stuck at SE logo after using Azuzu flashtool. Actually, I want to root my phone but I failed and now, I really want my phone back as usual. any solution? :crying:
Hi,
Here is my problem.
I have Xperia x10 mini/ yesterday , but mistake, I installed the firmware of the X10 mini PRO !!!
Now, once I understood the mistake, I want to flash with x10 mini firmware.
In order to flash I need to have FLASHTOOLS and need to press the BACK button - the problem is that since the phone is using now the wrong firmware, the BACK button (needed for the flushing ) doesn’t do anything and thus, I cannot install the correct firmware. I tried pushing all other buttons without any luck.
Any idea how I can overcome this problem ? I can’t use my phone now.
ramimos said:
Hi,
Here is my problem.
I have Xperia x10 mini/ yesterday , but mistake, I installed the firmware of the X10 mini PRO !!!
Now, once I understood the mistake, I want to flash with x10 mini firmware.
In order to flash I need to have FLASHTOOLS and need to press the BACK button - the problem is that since the phone is using now the wrong firmware, the BACK button (needed for the flushing ) doesn’t do anything and thus, I cannot install the correct firmware. I tried pushing all other buttons without any luck.
Any idea how I can overcome this problem ? I can’t use my phone now.
Click to expand...
Click to collapse
i think if back button dos not do any thing it mean's you cant connect your device into flashmode.
so i guess it's briked and you need (jtag) or (gtag) doing whit riff box.
ramimos said:
Hi,
Here is my problem.
I have Xperia x10 mini/ yesterday , but mistake, I installed the firmware of the X10 mini PRO !!!
Now, once I understood the mistake, I want to flash with x10 mini firmware.
In order to flash I need to have FLASHTOOLS and need to press the BACK button - the problem is that since the phone is using now the wrong firmware, the BACK button (needed for the flushing ) doesn’t do anything and thus, I cannot install the correct firmware. I tried pushing all other buttons without any luck.
Any idea how I can overcome this problem ? I can’t use my phone now.
Click to expand...
Click to collapse
You can see the logo of Sony Ericson?
Set phone to stock with SEUS (Sony Ericsson Update Service)
If so you can try to install PCCOMPANION to repair.
Choose your device and try to repair it.
Use this post.
http://forum.xda-developers.com/showthread.php?t=1504809
Hope that helps you.
patondroid said:
You can see the logo of Sony Ericson?
Set phone to stock with SEUS (Sony Ericsson Update Service)
If so you can try to install PCCOMPANION to repair.
Choose your device and try to repair it.
Use this post.
http://forum.xda-developers.com/showthread.php?t=1504809
Hope that helps you.
Click to expand...
Click to collapse
the back button dose not work!
and to update Set it back to stock with SEUS you need to connect th device in flashmood (if back button dose not work so how he will do it?!)
and when you flash a custom firmware SEUS or PCCOMPANION dose not recognize the device!
saeid.1980 said:
the back button dose not work!
and to update Set it back to stock with SEUS you need to connect th device in flashmood (if back button dose not work so how he will do it?!)
and when you flash a custom firmware SEUS or PCCOMPANION dose not recognize the device!
Click to expand...
Click to collapse
Since you have x10 Mini,I don't know how to help you,but in my x10 Mini Pro,if my phone can't be connected in Flashmode,I usually take out my phone battery,press and hold the back button,plug in the USB,and insert battery and wait until you see green light aka flashmode...
Sent from my SK17i using xda premium
U can update from SEUS. U remove and connect battery connector and connect to pc with SEUS. If its not worked u press(powerbutton+menu+back). I hope its help you
Sent from my X10mini using xda app-developers app
saeid.1980 said:
the back button dose not work!
and to update Set it back to stock with SEUS you need to connect th device in flashmood (if back button dose not work so how he will do it?!)
and when you flash a custom firmware SEUS or PCCOMPANION dose not recognize the device!
Click to expand...
Click to collapse
:silly:WTF back button.
Yea you're right.
What its the custom firmware installed, you can try to push convination of buttons for example:
backbutton and Power On at same time.
Powe On and another key.
Three buttons at same time, and put the battery, and connect the cable.
When i press three button at same time in my miniPro this represent another button.
Try this.
Good Luck.
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
6/030/2013 18:30:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
16/030/2013 18:30:20 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Use SEUS to restore Download from:
SEUS
Dont forget to pull of your battery for 4 seconds, for turn off your phone before connect your phone.
gnickz0r said:
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Click to expand...
Click to collapse
Press home and power buttons together, it will restart the phone, then start pressing the back-button repeatedly to get back into recovery and restore your previous rom from there. (Come to think of it, following my last paragraph below, you probably don't have recovery on your phone anymore, so, as Rempty mentioned above, repairing with SEUS or PC Companion would be the start to recover your phone to a usable state,.)
The error flashtool gave you is because you didn't unlock the bootloader and didn't change the kernel on your phone. It can't flash any non-sony kernel on a locked bootloader.
What is this 'update.zip' you're talking about? Most full roms have more informational names to distinguish between different zips. An update.zip is usually only for hotfixes to ROMS already flashed, and not a complete ROM.
Thanks a lot guys. I solve my problem with SEUS.
Phone completely formated.
Love you guys
Hey guys I hve instaled xrecovery and minicm9 too on my x10 mini pro I hve wiped chache,etc nd when I reboot , it hangs on SE logo plz help me
SE logo?? You forgot to install nAa kernel, do you unlock bootloader??, remember that minicm9 is not for stock kernel.
Sorry for my bad english
Sent from my iPhone6 using xda business
W'll when I try to unlock the bootloader it gives error can u plz help me
william chauhan said:
W'll when I try to unlock the bootloader it gives error can u plz help me
Click to expand...
Click to collapse
use flash tool to unlock ur bootloader
make sure ur fone is rooted
Sent from my U20i using xda premium
I'm already using flashtool bt it's nt working
william chauhan said:
I'm already using flashtool bt it's nt working
Click to expand...
Click to collapse
What's your phone's build date? Ex.11w37(written on the stick placed on the back )
Sent From My BEAST , I mean X8
My build no. Is 2.1.1.A.0.6
Plzz help me..
Plz help me.. I try to unlock the boot loader .. and the phone bricked !!!! what am i going to do??
i try the PC COMPANION but my phone did not detect it..
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Hey guys I used the flashtool to unlock the bootloader and I also followed the steps too but problem is when the phone was rebooted it didnt read the sim card now what should I do ? Please help
thas911 said:
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Click to expand...
Click to collapse
my phone is in HARD BRICKED.. my phone is dead the phone didnt charge and totally dead.. what should i do?? help me??
i also have a hard bricked,even when i put it to charge the phone its not blink the led
help