hi all
im having a bit of trouble i have an xperia x10 and i recently flashed it wit feralab and now the phone is stuck at the SE log iv tryed reflashing with azuzu downgrade but nothing happens it stays at the SE logo i could do with some lamens terms on this one please as i dont understand how to get my phone working again please help ...
hey buddy, use the search next time...
http://forum.xda-developers.com/showpost.php?p=24770795&postcount=2119
Dont stress mate, its not a problem.
When all else fails you can always go back to the stock rom and start flashing again from there. There are a couple of ways to do this...
SEUS (Sony Ericsson Update Service) find it here...
http://sony-ericsson-update-service.en.uptodown.com/
Or PC Companion, here...
http://www.sonymobile.com/gb/tools/pc-companion/
Hope this helps,
Have fun
You should see doomkernel logo then xperia logo.Looks like you didnt flash anything.....
Sent from my x10i using xda premium
maybe he is on stock kernel
my phone is bricked
can i still flash if i dont have usb debugging enabled?
Damn guys, why don'y you use the SEARCH BUTTON before posting...
Try to flash it with PC Companion to repair to stock rom then you'll be able to flash again another rom...
You can also use Flashtool to make a lot of thing (Unlock, flash, root... etc..)
Hope it helps
just use flashtool to flash the stock firmware and enjoy!
I am having a similar problem. Using this guide to unlock my bootloader, my X10 stucks at the "Sony Ericsson" logo. I managed to do the kernel downgrade and the actual unlocking (using the setools2 batch file). After this I can't shut down my phone, which means I can't get into flash mode.
Any help?
---------- Post added at 05:51 PM ---------- Previous post was at 04:58 PM ----------
jex123 said:
I am having a similar problem. Using this guide to unlock my bootloader, my X10 stucks at the "Sony Ericsson" logo. I managed to do the kernel downgrade and the actual unlocking (using the setools2 batch file). After this I can't shut down my phone, which means I can't get into flash mode.
Any help?
Click to expand...
Click to collapse
I finally made it into flash mode like this:
remove battery
connect X10 to PC
hold the back button and insert battery
After I reinstalled stock rom with SEUS my SIM is not recognised. I tried lots of related topics but nothing worked.
UPDATE:
SEUS does not seems to reset the bootloader or kernel. Use PC Companion like suggested here.
X10i stuck at SE logo after downgraded it by using azuzu flashtool
hi, I am new here. I need a solution of my phone, model x10i. It stuck at SE logo after using Azuzu flashtool. Actually, I want to root my phone but I failed and now, I really want my phone back as usual. any solution? :crying:
Related
I have managed to brick my X10 mini pro by trying to instal CWM Recovery, and now am stuck at SE logo screen.
So far i've tried:
1. Seus - it says my x10 mini pro is up to date and no update available
2. PC Companion - i tried the repair option, but in the end it doesn't let me repair
3. FlashTool - tryed flashing original kernel, new kernel, 1.6android kernel.... and after flashing it keeps getting me to reboot it, and activate debugging mode, which i can't because i'm still stuck at SE logo screen
4. Omnius - payed for a 1 day licence. I can flash it, but still nothing happens. I can't flash read my SE, and can't find any repair option in it...
Is there anything that can whipe it clean, and put the original stuff back again? Or any other solution?
P.S. I can't turn of the screen, not even with home+backbutton+power, only if i get the battery out.
I never thought the repair option in PC Companion wouldn't work if i ever bricked my phone, but ... as I can see for myself it doesn't .
Thank you in advance... hope to get it running, even if it costs me some money
And once again seus ! But remeber seus is not pc companion
Hey there,
If you take out your battery for over a minute and then put it back in, it should stop trying to boot up.
Also, when u connect your phone to the computer while keeping the back button pressed, SEUS should be able to install stock software/firmware regardless of it's opinion that u already have the latest.
This thread is very detailed about unbricking your phone too --> http://forum.xda-developers.com/showthread.php?t=1040149 (helped me lots before as well)
and you might also wanna install the file added to this thread's openingspost --> http://forum.xda-developers.com/showthread.php?t=1030902
Goodluck with your phone
hello, my phone stacked at the Sony Ericsson logo and i cant repair it from PC companion and now i try to fix it with flash tool and i search for any firmware. please give some links or try to help me.
Explain more how did u get bootloop??????
What u were doing??? Which ROM??
---------- Post added at 10:17 PM ---------- Previous post was at 10:12 PM ----------
May be this could help u.........
http://forum.xda-developers.com/showthread.php?t=1125587
i wanted to install my phone from new and i clicked on clean in flash tool and then my phone got stacked. my phone had the newest version. I tried also seue and it said that i have the newest firmware and i cant fix it. Now i try to fix it with flashing new firmware.
opayal said:
i wanted to install my phone from new and i clicked on clean in flash tool and then my phone got stacked. my phone had the newest version. I tried also seue and it said that i have the newest firmware and i cant fix it. Now i try to fix it with flashing new firmware.
Click to expand...
Click to collapse
in SEUS you have to click the "repair" option, that should do it
I have the same problem.
I've rebooted from CWM recovery after a new rom installation, and it told me that the recovery was broken.
So I choose to repair it but it didn't work.
I tried few times (5 or 6) and, at the end, I decided to switch off the phone and reboot.
Since then my phone is stacked on the Sony Ericsson Logo, it'is impossible to connect it using the "back" button and it is impossible to use SUSE properly I guess 'cause I tried but it does not recognize the phone.... I tried with an hard reset (Home+power) but it shuts down and then again it stacks.
Obviously the back button does not allow me to go on recovery mode....
My sister will kill me!
Im on the same boat (looking for fw)
looking for 2.1 for x10a (e10a) ver 2.0.A.0.504
all hosted in m3g4upl04d/m3g4sh4r3 are lost
Regards
download E10a firmware and flash it using flashtools
romolito said:
I have the same problem.
I've rebooted from CWM recovery after a new rom installation, and it told me that the recovery was broken.
So I choose to repair it but it didn't work.
I tried few times (5 or 6) and, at the end, I decided to switch off the phone and reboot.
Since then my phone is stacked on the Sony Ericsson Logo, it'is impossible to connect it using the "back" button and it is impossible to use SUSE properly I guess 'cause I tried but it does not recognize the phone.... I tried with an hard reset (Home+power) but it shuts down and then again it stacks.
Obviously the back button does not allow me to go on recovery mode....
My sister will kill me!
Click to expand...
Click to collapse
1st, have you tried connecting your phone via flash mode to flashtool ? Can flashtool detect it ? Because, if your phone can enter sony logo, I think SEUS /flashtool will be able to detect it as well..
In case SEUS still fails but flashtool is able to connect,, try to install nAa latest kernel (I suggest to redownloading it), since it contains recoovery as well..
Hopefully that helps..
Sent from my U20i using XDA
opayal said:
hello, my phone stacked at the Sony Ericsson logo and i cant repair it from PC companion and now i try to fix it with flash tool and i search for any firmware. please give some links or try to help me.
Click to expand...
Click to collapse
Don't worry my friend. Just give me some time to find an X10 Mini and I'll provide you an .ftf.
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
6/030/2013 18:30:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
16/030/2013 18:30:20 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Use SEUS to restore Download from:
SEUS
Dont forget to pull of your battery for 4 seconds, for turn off your phone before connect your phone.
gnickz0r said:
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Click to expand...
Click to collapse
Press home and power buttons together, it will restart the phone, then start pressing the back-button repeatedly to get back into recovery and restore your previous rom from there. (Come to think of it, following my last paragraph below, you probably don't have recovery on your phone anymore, so, as Rempty mentioned above, repairing with SEUS or PC Companion would be the start to recover your phone to a usable state,.)
The error flashtool gave you is because you didn't unlock the bootloader and didn't change the kernel on your phone. It can't flash any non-sony kernel on a locked bootloader.
What is this 'update.zip' you're talking about? Most full roms have more informational names to distinguish between different zips. An update.zip is usually only for hotfixes to ROMS already flashed, and not a complete ROM.
Thanks a lot guys. I solve my problem with SEUS.
Phone completely formated.
Love you guys
Hey guys I hve instaled xrecovery and minicm9 too on my x10 mini pro I hve wiped chache,etc nd when I reboot , it hangs on SE logo plz help me
SE logo?? You forgot to install nAa kernel, do you unlock bootloader??, remember that minicm9 is not for stock kernel.
Sorry for my bad english
Sent from my iPhone6 using xda business
W'll when I try to unlock the bootloader it gives error can u plz help me
william chauhan said:
W'll when I try to unlock the bootloader it gives error can u plz help me
Click to expand...
Click to collapse
use flash tool to unlock ur bootloader
make sure ur fone is rooted
Sent from my U20i using xda premium
I'm already using flashtool bt it's nt working
william chauhan said:
I'm already using flashtool bt it's nt working
Click to expand...
Click to collapse
What's your phone's build date? Ex.11w37(written on the stick placed on the back )
Sent From My BEAST , I mean X8
My build no. Is 2.1.1.A.0.6
Plzz help me..
Plz help me.. I try to unlock the boot loader .. and the phone bricked !!!! what am i going to do??
i try the PC COMPANION but my phone did not detect it..
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Hey guys I used the flashtool to unlock the bootloader and I also followed the steps too but problem is when the phone was rebooted it didnt read the sim card now what should I do ? Please help
thas911 said:
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Click to expand...
Click to collapse
my phone is in HARD BRICKED.. my phone is dead the phone didnt charge and totally dead.. what should i do?? help me??
i also have a hard bricked,even when i put it to charge the phone its not blink the led
help
Hello guys,
I am on a trip to the UK. During the flight the phone was working fine. Turned it off during the landing and tried to turn it on when the plane landed. But it won't turn on. It's stuck on the Sony logo. The phone was rooted with locked bootloader. I managed to get into the CWM and backup and even made a fresh install of the ROM (zelly cream) I could use the aroma installer, the touchscreen wouldn't work though. PC companion recognises the phone, says there no update. I used flashtool several times. Everything installs correctly but still stuck on sony logo. Please help me. I am stuck with no phone on my trip.
Re: Ray stuck on Sony Logo.. Please help I am in a trip abroad!
was your bootloader Unlocked when you connected to PC Companion?
predatOr said:
was your bootloader Unlocked when you connected to PC Companion?
Click to expand...
Click to collapse
No. It was locked.
Re: Ray stuck on Sony Logo.. Please help I am in a trip abroad!
Use sony update tool not compagnon
sony xperia ray
ics 4.0.4 rooted
stock rom
matgras said:
Use sony update tool not compagnon
sony xperia ray
ics 4.0.4 rooted
stock rom
Click to expand...
Click to collapse
I tried. Says there's no update. I even flashed to the older GB firmwares but still says there's no updates.
Re: Ray stuck on Sony Logo.. Please help I am in a trip abroad!
Looks like a legit hard brick
sony xperia ray
ics 4.0.4 rooted
stock rom
It looks like a hardbrick, but if you're still under warranty then flash a stock firmware and send it to sony service center. Should be fine with locked bootloader
mihahn said:
It looks like a hardbrick, but if you're still under warranty then flash a stock firmware and send it to sony service center. Should be fine with locked bootloader
Click to expand...
Click to collapse
The phone's out of warranty.
I went to a shop that repairs phones, they sent it back in 3 days saying it can't be fixed. Now what? I have an expensive paperweight? It's not heavy enough for that either.
weird,I got stuck in sony logo more than 10 times.and repair it with flashtool did you follow the guide correctly?
Sent from my ST18i using xda premium
Only solution I found
I had almost a similar problem. I had installed the same rom to my xperia ray and tried to update it with different selections in aroma installer. The result was the phone stuck at the sony logo.
I tried PC companion and it recognised a sony phone but not a ray.
I tried seus, this detected correctly xperia ray, but it replied that there is no update for my phone.
I tried flashtool but it could not recognize my phone and any way I didn't have any thing to flash my ray. (I installed the drivers from the subdirectory)
So I tryied something I've used a year ago: Wotan server. I paid about $2 to get a license and after executing the steps of the tool, I finally had my phone back.
I know that I'm not an expert on the field, and maybe there are other free of charge ways to do the work, but this worked for my phone and this was the second time.
PS. After the procedure I updated my phone using SEUS and this time I kept the stock ICS files and converted them to ftf files
I think the internal memory chip is faulty or something. Or it wouldn't even boot in the first place?
Flashing a stock kernel with flashtool usually does the job for men when that happens...
negus40 said:
Flashing a stock kernel with flashtool usually does the job for men when that happens...
Click to expand...
Click to collapse
flash any firmware via Flashtol
firmware here : http://forum.xda-developers.com/showthread.php?t=1627627
Flashtool here : http://androxyde.github.io/index.html?1365876195000
_ziant_ said:
flash any firmware via Flashtol
firmware here : http://forum.xda-developers.com/showthread.php?t=1627627
Flashtool here : http://androxyde.github.io/index.html?1365876195000
Click to expand...
Click to collapse
Thanks. Did this a hundred times. Still not working It may be a hardware problem
Guys please help me
Guys please help me. I rooted, unlocked bootloaders and unbricked android phones many times before but I just don't know what to do now. I tried flashing with flashtool 10000 times, everything goes ok but the phone won't go past the sony logo. I tried removing the battery for days. I tried charging for days. I even tried unlocking the bootloader and installing custom kernels. No luck. SEUS said there's no update even though I flashed an old firmware and after unloacking the BL says the phone has modified firmware that cannot be modified , EMMA says no available services. The only thing I didn't try is the test points method but why would I?
Anyone has any idea what's going on? I don't have the money for another phone right now
Anyone??
neofyt05 said:
Guys please help me. I rooted, unlocked bootloaders and unbricked android phones many times before but I just don't know what to do now. I tried flashing with flashtool 10000 times, everything goes ok but the phone won't go past the sony logo. I tried removing the battery for days. I tried charging for days. I even tried unlocking the bootloader and installing custom kernels. No luck. SEUS said there's no update even though I flashed an old firmware and after unloacking the BL says the phone has modified firmware that cannot be modified , EMMA says no available services. The only thing I didn't try is the test points method but why would I?
Anyone has any idea what's going on? I don't have the money for another phone right now
Click to expand...
Click to collapse
What did you do before? Did you flash anything or what happend?
same with me, stucked. ><
Kiraichi said:
same with me, stucked. ><
Click to expand...
Click to collapse
Then read through the thread or Google. There is enough information on how to restore your Phone in this thread alone, never mind the rest of the forum or numerous threads that have been started in the last few months.
Sent from Myushi
mihahn said:
What did you do before? Did you flash anything or what happend?
Click to expand...
Click to collapse
The phone was rooted with a custom ROM (Zelly Cream 2.0). The rom was flashed weeks before that happened. I was on the plane playing games on the phone. Turned it off for landing. Tried turning it on after the plane landed and it was stuck on the sony logo. I could get into the CWM and used the Aroma installer using the keys as the touchscreen would not work.
Hi all,
sorry for starting new thread. But i have some strange problem on my Xperia x10 mini pro.
I was trying to install a custom rom on my xperia x10 mini pro. i've successively installed ICA kernel on my phone. then i've installed Mini CM7 gingerbread rom on my phone. but after successful completion my phone stuck at ica logo only. so i have flash again the kernal to its original xperia kernal with the help of flash tool.
but as i flash the kenel, my phone become dead. no restart, no light signal, no any sign of working. I have also tried to put the phone in charger about an hour but still i cant able to start the phone. Even my phone is not detected on pc in PC companion or SEUS.
how can i get back my phone? Kindly help me..
Thanks in advance!!!
hrdpgajjar said:
...
but after successful completion my phone stuck at ica logo only. so i have flash again the kernal to its original xperia kernal with the help of flash tool.
but as i flash the kenel, my phone become dead. no restart, no light signal, no any sign of working. I have also tried to put the phone in charger about an hour but still i cant able to start the phone. Even my phone is not detected on pc in PC companion or SEUS.
how can i get back my phone? Kindly help me..
...
Click to expand...
Click to collapse
Flashtool doesn't have the original xperia kernel. What you flashed is the bootloader relock kernel for the X10 (the huge one) not the X10 mini pro.
Only solution for you is a JTAG.
Secondly... What is the ICA kernel? Never heard of it.
What is JTAG and how can i use it to get my phone back...????
hrdpgajjar said:
What is JTAG and how can i use it to get my phone back...????
Click to expand...
Click to collapse
Did you solve the problem? Ihave the same... and no idea about waht to do!