Ok so i followed Lokifish Marz's SPflash tools and return to stock flashing tutorial.
The problem is when i shut the device off for SPtools to start flashing it gets stuck at Downloading DA 100% and then i get an error saying that SPtools cannot reach the device. But even after that my omate soft bricks and i have to wait for the battery to die and recharge before i can use it again.
Do i need to update SPtools or something? Any help is appreciated!
Thanks ~ Bladeofdarkness
bladeofdarkness said:
Ok so i followed Lokifish Marz's SPflash tools and return to stock flashing tutorial.
The problem is when i shut the device off for SPtools to start flashing it gets stuck at Downloading DA 100% and then i get an error saying that SPtools cannot reach the device. But even after that my omate soft bricks and i have to wait for the battery to die and recharge before i can use it again.
Do i need to update SPtools or something? Any help is appreciated!
Thanks ~ Bladeofdarkness
Click to expand...
Click to collapse
"cannot reach the device" is a disconnect issue. Try gently lifting the pins on the dock to get better contact with the TS.
Turn on again?
Lokifish Marz said:
"cannot reach the device" is a disconnect issue. Try gently lifting the pins on the dock to get better contact with the TS.
Click to expand...
Click to collapse
Yes ive tried but would this cause me to not be able to turn on the true smart afterwards?
The exact error was:
error: brom error : s_ft_da_no_response(4001) da didn't send response data to flash tool! [hint]:
bladeofdarkness said:
Yes ive tried but would this cause me to not be able to turn on the true smart afterwards?
The exact error was:
error: brom error : s_ft_da_no_response(4001) da didn't send response data to flash tool! [hint]:
Click to expand...
Click to collapse
That error is the TS disconnecting from the PC during the flash process. What OD are you using? What model are you trying to flash? What firmware are you using?
Lokifish Marz said:
That error is the TS disconnecting from the PC during the flash process. What OD are you using? What model are you trying to flash? What firmware are you using?
Click to expand...
Click to collapse
Noob question whats a OD?
Model just says Truesmart, dev 512 + 4
Firmware is omate_1900_truesmart_20140120.zip - 688.00 MB
bladeofdarkness said:
Noob question whats a OD?
Model just says Truesmart, dev 512 + 4
Firmware is omate_1900_truesmart_20140120.zip - 688.00 MB
Click to expand...
Click to collapse
OS (Sorry)
That firmware has no working sensors. you want the working sensors release.
Lokifish Marz said:
OS (Sorry)
That firmware has no working sensors. you want the working sensors release.
Click to expand...
Click to collapse
But only the EU version says working sensors...
bladeofdarkness said:
But only the EU version says working sensors...
Click to expand...
Click to collapse
Sorry, I'm all over the place right now and folks not listing much needed info from the start makes it really hard
The sensors work on the 1900 firmware. So the if you have a 1900 then the 1900 firmware is what you want. Sorry.
Lokifish Marz said:
Sorry, I'm all over the place right now and folks not listing much needed info from the start makes it really hard
The sensors work on the 1900 firmware. So the if you have a 1900 then the 1900 firmware is what you want. Sorry.
Click to expand...
Click to collapse
Thats what i have now how do i get SPtools to stop soft bricking the device?
bladeofdarkness said:
Thats what i have now how do i get SPtools to stop soft bricking the device?
Click to expand...
Click to collapse
What OS is on your computer?
Where did you get the SPTools and drivers from?
(if this issue had been posted in the thread where you got SPTools from and the guide you followed this would be much easier)
Lokifish Marz said:
What OS is on your computer?
Where did you get the SPTools and drivers from?
(if this issue had been posted in the thread where you got SPTools from and the guide you followed this would be much easier)
Click to expand...
Click to collapse
My os is Win 8 and i got it from your download you had in your INDEX thread.
bladeofdarkness said:
My os is Win 8 and i got it from your download you had in your INDEX thread.
Click to expand...
Click to collapse
Try this method instead. I still have yet to get mine to consistently work correctly on Win8 and is the reason why I suggest folks use Win7.
Lokifish Marz said:
Try this method instead. I still have yet to get mine to consistently work correctly on Win8 and is the reason why I suggest folks use Win7.
Click to expand...
Click to collapse
Now for some reason this one worked... thanks for recommending it!
Does the other thread have a update version of SP flash tools?
bladeofdarkness said:
Now for some reason this one worked... thanks for recommending it!
Does the other thread have a update version of SP flash tools?
Click to expand...
Click to collapse
All the files from my thread are the latest from MediaTek. Actually I think that both his and mine are the exact same files.
Lokifish Marz said:
All the files from my thread are the latest from MediaTek. Actually I think that both his and mine are the exact same files.
Click to expand...
Click to collapse
Thats weird.
Returning to stockrom
Guys anyone help me im newbie
unable to flash stock to my lenovo a2010-a which is mtk6735
when im trying to flash it shows Downloading DA 100% and throws an error that "DA Didn't send response data to flash tool"
im using spflashtool v5.15 in my linux operating system
Related
OK, I wanted to format the internal storage so I Task 29 it.
It told me to hold the volume down button when it reach 99%
Well it stopped at 96% for a while, so I held the volume button down
Now when I turn on the screen, it just shows the loading screen towards that CleanEx rom and nothing else!!!
Bootloader mode only supports disk drive connection to pc so I don't think that's appropriate.
I need help because I am about to give this phone as a gift
THANK YOU IN ADVANCE
Its um SPL 2.08
HSPLd
CotullaHSPL
for more info
A new hacker said:
Its um SPL 2.08
HSPLd
CotullaHSPL
for more info
Click to expand...
Click to collapse
have you flash a correct radio FIRST??
geppo1975 said:
have you flash a correct radio FIRST??
Click to expand...
Click to collapse
It was flashed before, the correct one IDk.
A new hacker said:
It was flashed before, the correct one IDk.
Click to expand...
Click to collapse
if you're sure to have flashed all properly,than i suggest a new dwld:maybe your file is bad or corrupt?!
geppo1975 said:
if you're sure to have flashed all properly,than i suggest a new dwld:maybe your file is bad or corrupt?!
Click to expand...
Click to collapse
Can you provide assistance with that? That is a new term to me
A new hacker said:
Can you provide assistance with that? That is a new term to me
Click to expand...
Click to collapse
that's mean your file(rom or radio)in download or upload has lost some parts or file!!You can try to dwld from other server or try again from same...sometimes happens
you task29d, do you even know what that means? it means you formatted your phone there is no rom on it, how can it boot with no rom?
enter bootloader, connect usb, (yes bootloader is fine),, flash a rom.
OK, sorry for the fuss. Now it seems that usb is working but when I try to upgrade the Rom (official) the percentage just stays at 0% and gives some error messages. Please help
A new hacker said:
and gives some error messages.
Click to expand...
Click to collapse
aww c'mon, at LEAST tell us the error
It says [connection] cannot establish (I've done all the things listed)
Error [262] thanks for the assistance
A new hacker said:
Error [262] thanks for the assistance
Click to expand...
Click to collapse
- Are you well connected over Active Sync?
- Did you test it on a other USB port?
- Did you temporary deactivated your AntiVirus?
- Try to reset device and pc
- On Windows vista and window 7 don't forget to run RUU_Leo_S_HTC_... as administrator
This are some suggestions that can solved connection problems.
A new hacker said:
Error [262] thanks for the assistance
Click to expand...
Click to collapse
Why not extract the nbh file from the downloaded rom, rename it as required (leoimg.nbh but please check on the site, I'm on my phone so you'll have to do that ) place it on the root of ur SD card, go into bootloader and if you take your fingers off the keys at the right time, the rom will flash directly from there.
I have a MAC and flash via SD card all the time
Sent from my HTC HD2 using XDA App
timmymarsh said:
Why not extract the nbh file from the downloaded rom, rename it as required (leoimg.nbh but please check on the site, I'm on my phone so you'll have to do that ) place it on the root of ur SD card, go into bootloader and if you take your fingers off the keys at the right time, the rom will flash directly from there.
I have a MAC and flash via SD card all the time
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Sorry for the bad news but can you visit this forum? It has more details and updated news. and i like to emphasize that the usb doesn't work, disk drive or activesync
http://forum.xda-developers.com/showthread.php?t=891115
thread closed now redundant, linked thread continues.
Problem was solved by taking it to samsung service!
They changed a main piece. The motherboard!
DO NOT USE GALAXY_UNLOCKER.APK if you dont want your phone tottaly bricked!
There are other ways to unlock it!
raul2100 said:
Hello,
I dont know IF posting in the right place, but I searched the whole forum for a proper answer how to "unbrick" my boot loop-ed Samsung Galaxy Ace S5830..
Now I've tried installing several firmwares using Odin multi downloader v4.83 but none of them helped me, after all I cant access Recovery Mode!
I can acess Download mode, Emergency Dmod (arm9) and RAMDUMP (arm9)
I have: Android 2.3.3 GingerBread on T-Mobile Carrier (Hungary)!
How did I get here: rooted with SuperOneClick 2.3.2 and used an app for unlock (Galaxy Ace Unlock.apk) witch was probably the main source of the problem... Had no problems until I decided to reboot, rebooted successfully, the problem I had then was No carrier, then tried a second reboot and ever since then I'm stuck into a boot loop with no access whatsoever to RECOVERY MODE.
After installing firmware and waiting the 5 minutes in Odin, my device reboots intro a boot loop after about 2:32 min and nothing can be done furthermore...
I've serched the forum and found that data.rfs is missing in the firmwares... maybe that the source of the problem to... I dont know...
Please help me fix this problem!! Thank you!
p.s: noob alert
Click to expand...
Click to collapse
You'll just have to keep flashing roms via Download Mode until one works (try flashing the stock rom).
P.S.: Your device has it's own forum: http://forum.xda-developers.com/forumdisplay.php?f=1164.
Theonew said:
You'll just have to keep flashing roms via Download Mode until one works (try flashing the stock rom).
P.S.: Your device has it's own forum: http://forum.xda-developers.com/forumdisplay.php?f=1164.
Click to expand...
Click to collapse
Which ones should I try? Any Advice is helpfull!
raul2100 said:
Which ones should I try? Any Advice is helpfull!
Click to expand...
Click to collapse
As I said - the stock rom.
Theonew said:
As I said - the stock rom.
Click to expand...
Click to collapse
just tried, not working: S5830SERKPH 2.3.4 stock rom
raul2100 said:
just tried, not working: S5830SERKPH 2.3.4 stock rom
Click to expand...
Click to collapse
Are you flashing it correctly? Make sure you do everything in step C here: http://forum.xda-developers.com/showthread.php?t=1034145.
Theonew said:
Are you flashing it correctly? Make sure you do everything in step C here: http://forum.xda-developers.com/showthread.php?t=1034145.
Click to expand...
Click to collapse
every single step, when it should reboot it goes straight to boot loop, and still no recovery menu...
raul2100 said:
every single step, when it should reboot it goes straight to boot loop, and still no recovery menu...
Click to expand...
Click to collapse
Try flashing this one: http://www.hotfile.com/dl/137316855/e3bb576/S5830BUKS2_S5830VDHKS1_VDH.zip.html.
I've tried that today, didn't work either.
raul2100 said:
I've tried that today, didn't work either.
Click to expand...
Click to collapse
Try flashing a Froyo rom then: http://droidangel.blogspot.com/2011/05/samsung-galaxy-ace-s5830-original-stock.html.
Theonew said:
Try flashing a Froyo rom then: http://droidangel.blogspot.com/2011/05/samsung-galaxy-ace-s5830-original-stock.html.
Click to expand...
Click to collapse
well, now it wont even start! I think I've bricked it,
cant even boot it, nor download mode nor nothing...
raul2100 said:
well, now it wont even start! I think I've bricked it,
cant even boot it, nor download mode nor nothing...
Click to expand...
Click to collapse
Did you choose the one for your device (country+carrier)? Anyways, see here on how to unbrick it: http://forum.xda-developers.com/showthread.php?t=1071970.
Theonew said:
Did you choose the one for your device (country+carrier)? Anyways, see here on how to unbrick it: http://forum.xda-developers.com/showthread.php?t=1071970.
Click to expand...
Click to collapse
dident picked the one for my carrier or country, cause there no description on them... so I picked the 1st one, I did the unbricking btw.. but still got boot loop
raul2100 said:
dident picked the one for my carrier or country, cause there no description on them... so I picked the 1st one, I did the unbricking btw.. but still got boot loop
Click to expand...
Click to collapse
Did you use the cooper.ops?
Theonew said:
Did you use the cooper.ops?
Click to expand...
Click to collapse
yes, I did!
Tried a second froyo firmware that was for my region, still not working..
raul2100 said:
yes, I did!
Tried a second froyo firmware that was for my region, still not working..
Click to expand...
Click to collapse
It seems like your motherboard is damaged so you'll have to take it in under warranty.
Theonew said:
It seems like your motherboard is damaged so you'll have to take it in under warranty.
Click to expand...
Click to collapse
Thank you for your help until now & Happy New Year! I'd still like to solve this problem somehow before I take it under warranty! Witch I was planning to do tomorrow!
I dont understand how can my motherboard be damaged? If it would be damaged then probably I't would not even start in the 1st place.
I forgot to mention that I had a Movetosd app installed also, but I dont remember the full name of the app...
Any other Ideas?
raul2100 said:
Any other Ideas?
Click to expand...
Click to collapse
You have done everything you could and it's still not fixed (even the things other people did when they had the same problem - it worked for them, but not for you), so warranty is the only other way to get it fixed (or at least replaced).
Theonew said:
You have done everything you could and it's still not fixed (even the things other people did when they had the same problem - it worked for them, but not for you), so warranty is the only other way to get it fixed (or at least replaced).
Click to expand...
Click to collapse
Thank you for the help Theonew! Appreciate! I've taken it into warranty service, hopefully they wont find my device inappropriate for free service, and so I dont have to pay for it...
The only problem is that I have to wait at least 8 days untill I get it back..
Anyway, I've researched this Galaxy Unlock apk. and it seems thats the main source of the problem.
Thanks again!
Hi,
I have been updated my G9 device firmware to 4.05. During update everything was ok. After update, a message appears that say "Starting applications". After 15 minutes nothing happened and mistakenly I have restarted my device. After restarting, archos welcome screen appear but nothing occur!
Also I try to fix it by recovery options like:
1- Repair System>Check Disk : No problem found!
2- Upgrade firmware: Downgrade firmware show me error 221 and trying to install 4.05 is successful but after installation my problem exist yet!
3- Format Disk> Reformat Device...: Even I try to reformat it but after reformat and updating firmware, my problem exist.
I'm so upset! Please help me to fix this problem...
is your device fully charged
Shano56 said:
is your device fully charged
Click to expand...
Click to collapse
Before update, it was 88% charged!
Did you try to flash the new official non-rootet rom?
SE-X1 said:
Did you try to flash the new official non-rootet rom?
Click to expand...
Click to collapse
Yes! I try to flash new official by recovery options, "Upgrade firmware" but it show me error 221 and don't flash!
do a re-format device, not an upgrade...it should solve the problem
Masih60 said:
Yes! I try to flash new official by recovery options, "Upgrade firmware" but it show me error 221 and don't flash!
Click to expand...
Click to collapse
That means that the fw is corrup or that tne filename is wrong, all you have to do is re-download the firmware and make shure that the filename is correct (without a "2" or any other number at the end that indicates it was the second firmware file in the donload folder)... so reformat your device and retry.
Hope I helped,
Tom
mmmm... I'm noob at handhelds but it seems that a part of my device that boot it has been damaged and I don't know how to fix it...
Masih60 said:
mmmm... I'm noob at handhelds but it seems that a part of my device that boot it has been damaged and I don't know how to fix it...
Click to expand...
Click to collapse
what is the name of the file you are using?
pbarbosa said:
do a re-format device, not an upgrade...it should solve the problem
Click to expand...
Click to collapse
Dear friend, I told that...
3- Format Disk> Reformat Device...: Even I try to reformat it but after reformat and updating firmware, my problem exist.
Anyway... Thanks for trying to help!
pbarbosa said:
what is the name of the file you are using?
Click to expand...
Click to collapse
It's: "firmware_archos_it4.aos"
TjaXanK said:
That means that the fw is corrup or that tne filename is wrong, all you have to do is re-download the firmware and make shure that the filename is correct (without a "2" or any other number at the end that indicates it was the second firmware file in the donload folder)... so reformat your device and retry.
Hope I helped,
Tom
Click to expand...
Click to collapse
I hope so man! Now I'm going to download new firmware from: update.archos.com/9/gen9/gen9_3.2.80-2/firmware_archos_it4.aos
But I have still have a question: Why this happened?
Masih60 said:
mmmm... I'm noob at handhelds but it seems that a part of my device that boot it has been damaged and I don't know how to fix it...
Click to expand...
Click to collapse
Try what i told you to do... that error means there is a prblem with the update file, so either it's corrupt or the file name is wrong
HI !
Please ..can you try also ? - press 10 sec. on power ( until the green light closed).... now .. while pres volume down ...press power ( and don't release ) until you will entry in recovery (SDE) ! Now try to do Format System-> Reformat Device-> I Understand -> OK! and wait a while until a new driver appear - > now copy Stock Archos ICS 4.0.5 .aos file into it and flash ! I hope will work this method ! Good luck.
Now I'm going to download new firmware from: update.archos.com/9/gen9/gen9_3.2.80-2/firmware_archos_it4.aos
But I have still have a question: Why this happened?
Whats that for a link?
Seems for me that MIGHT be a firmware NOT for our devices ????
svennimann said:
Now I'm going to download new firmware from: update.archos.com/9/gen9/gen9_3.2.80-2/firmware_archos_it4.aos
But I have still have a question: Why this happened?
Whats that for a link?
Seems for me that MIGHT be a firmware NOT for our devices ????
Click to expand...
Click to collapse
use this instead
http://update.archos.com/9/gen9/gen9_4.0.5/firmware_archos_it4.aos
Masih60 said:
I hope so man! Now I'm going to download new firmware from: update.archos.com/9/gen9/gen9_3.2.80-2/firmware_archos_it4.aos
Click to expand...
Click to collapse
Which tools do you use for download? I had the same error 221 and then I read somewhere (maybe in this forum) that Mozilla actually recognizes the archive format, unpacks the file for virus check (or whatever else), and then re-packs it. But the original file is digitally sighed by Archos, and the repacked one is not. That is why the updater rejects it. Since that, I did a couple of successful upgrades using the most basic tool, wget, to download the file to my PC first. Try this.
The following seems to be the result of the bad update script. Which version did you start from? Not too old? It looks like the script deleted the existing software first, then checked the new file, and rejected it - and what to do next?
ps. If someone definitely knows that the above reasoning about download is wrong, please let us know this - not to spread this rumour any longer.
use
RECOVEY (ON OFF/ VOL -),
RESET ANDROID via REPAIR SYSTEM and FORMAT SYSTEM.
Install the firmware
Thanks everyone! Thanks so much. I solved my problem and my device go on! And now we can go to second step...
Please check this topic and help me again:
http://forum.xda-developers.com/showthread.php?p=24035091#post24035091
Thanks so much again!
Masih60 said:
Thanks everyone! Thanks so much. I solved my problem and my device go on! And now we can go to second step...
Please check this topic and help me again:
http://forum.xda-developers.com/showthread.php?p=24035091#post24035091
Thanks so much again!
Click to expand...
Click to collapse
Glad to have helped
iourine said:
ps. If someone definitely knows that the above reasoning about download is wrong, please let us know this - not to spread this rumour any longer.
Click to expand...
Click to collapse
Ok, I had time to experiment todaya nd now I do know definitely that I was wrong - at least, for the current version. Downloaded the file a few times by both Mozilla and wget, calculated the checksums - it is identical and successfully recognized by the updater. So the above error is nothing but a spontaneous download error, once it occures - just reload the file. On the other hand, wget is very resilent to transmission errors, so file corruption is less likely while using it.
Hey there all fellow XDA members, i have encountered a problem with my p780 8gb, i bought it from Malaysia in the beginning of the year,
this morning i woke up wondering why the alarm didnt go off and saw my phone stuck at the boot screen.
I didnt do anything but update the phone a week ago via the lenovo updater to kit kat, i rooted it in Jelly Bean but didnt do it yet when i updated to Kit Kat, ive tried resetting, clearing cache & it doesnt work, im not too sure what to do but i was thinking of going back to Jelly Bean, if anybody has links to a good rom that will work for me that will be really awesome.
Thank You ! :good:
AndroidLion said:
Hey there all fellow XDA members, i have encountered a problem with my p780 8gb, i bought it from Malaysia in the beginning of the year,
this morning i woke up wondering why the alarm didnt go off and saw my phone stuck at the boot screen.
I didnt do anything but update the phone a week ago via the lenovo updater to kit kat, i rooted it in Jelly Bean but didnt do it yet when i updated to Kit Kat, ive tried resetting, clearing cache & it doesnt work, im not too sure what to do but i was thinking of going back to Jelly Bean, if anybody has links to a good rom that will work for me that will be really awesome.
Thank You ! :good:
Click to expand...
Click to collapse
Here you are. Try this from here: http://forum.xda-developers.com/len...p780-row-s222-140817-flash-flashtool-t2861983
stympy said:
Here you are. Try this from here: http://forum.xda-developers.com/len...p780-row-s222-140817-flash-flashtool-t2861983
Click to expand...
Click to collapse
Thank you Stympy ! is there possibly a guide to do all of this ? So basically you saying i must just reflash it with that rom ? Is that a customised rom with all the unused apps possibly ? Thank You !
AndroidLion said:
Thank you Stympy ! is there possibly a guide to do all of this ? So basically you saying i must just reflash it with that rom ? Is that a customised rom with all the unused apps possibly ? Thank You !
Click to expand...
Click to collapse
Hi there. Flash the ROM for 8 GB. Do not flash that for 4 GB. Usit first. I have 4 GB ROM. Look in Development section.
stympy said:
Hi there. Flash the ROM for 8 GB. Do not flash that for 4 GB. Usit first. I have 4 GB ROM. Look in Development section.
Click to expand...
Click to collapse
Thank you man, im looking at this guide here http://forum.xda-developers.com/lenovo-p780/help/aosp-based-kitkat-rom-lenovo-row-p780-t2850715 , do you think that should do the trick well and proper ? Regards : )
Just a little concerned cause im newb at flashing roms and all on Android, last thing i want to do is brick the phone.
Factory reset and no luck still doing the same thing..... : /
AndroidLion said:
Factory reset and no luck still doing the same thing..... : /
Click to expand...
Click to collapse
there is no way to hard brick this kind of phone.
just try what i show you.
this is trusty.
Here is one example about how to..
http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
stympy said:
there is no way to hard brick this kind of phone.
just try what i show you.
this is trusty.
Here is one example about how to..
http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
Click to expand...
Click to collapse
Thanx Stympy,
So should i flash with the recovery menu or use the sp tool flash ? cause when i plug the phone in it detects but doesnt find the MT driver on windows, appreciate your help man, Regards.
AndroidLion said:
Thanx Stympy,
So should i flash with the recovery menu or use the sp tool flash ? cause when i plug the phone in it detects but doesnt find the MT driver on windows, appreciate your help man, Regards.
Click to expand...
Click to collapse
Use SpflashTool.
Here are the drivers.
stympy said:
Use SpflashTool.
Here are the drivers.
Click to expand...
Click to collapse
Much appreciated once again ! I was looking for a guide to flash and i was wondering if this is a good guideline ? Anything im missing ? Thank you so much man !!!
Step by step guide to Flash stock rom:
1.If your phone is not already soft bricked, back up whatever you want. External SD card is fine. If your phone is soft-brick then say goodbye to your data and skip this step.
2. Uncompress all the files you downloaded from this thread into a directory where you can remember. Including the ROMs.
3.Shutdown your phone if its not in a bootloop. If it is skip this step.
4.Open "Device Manager" on your Windows PC.
5.Plug in your phone through the micro USB cable. A device will show up for a few seconds in "Device Manager". After that, it will disappear again!
6.Recognize the device tree where it appeared, and wait for it as you unplug and plug in your phone again (if bootloop, its automatic!)
7.Catch it with a right click as it appears! Then choose "Update Drivers" and pick the directory where you uncompressed the drivers you downloaded above. Its ok if after catching it the device disconnects. You only need to install the drivers now.
8.Assuming the drivers are correctly installed, run the Smart Phone Flash Tool.
9.Click on scatter-loading and choose the scatter file "MT6589_Android_scatter_emmc.txt" of the ROM you want to flash.
10.Make sure the checkbox "DL DA All With Check Sum" is CHECKED
11.Click on "Firmware->Upgrade" button.
12.Plug in your powered down phone via the USB cable again. See it flash.
13.When a big green circle appears on the screen, your are done!
AndroidLion said:
Much appreciated once again ! I was looking for a guide to flash and i was wondering if this is a good guideline ? Anything im missing ? Thank you so much man !!!
Step by step guide to Flash stock rom:
1.If your phone is not already soft bricked, back up whatever you want. External SD card is fine. If your phone is soft-brick then say goodbye to your data and skip this step.
2. Uncompress all the files you downloaded from this thread into a directory where you can remember. Including the ROMs.
3.Shutdown your phone if its not in a bootloop. If it is skip this step.
4.Open "Device Manager" on your Windows PC.
5.Plug in your phone through the micro USB cable. A device will show up for a few seconds in "Device Manager". After that, it will disappear again!
6.Recognize the device tree where it appeared, and wait for it as you unplug and plug in your phone again (if bootloop, its automatic!)
7.Catch it with a right click as it appears! Then choose "Update Drivers" and pick the directory where you uncompressed the drivers you downloaded above. Its ok if after catching it the device disconnects. You only need to install the drivers now.
8.Assuming the drivers are correctly installed, run the Smart Phone Flash Tool.
9.Click on scatter-loading and choose the scatter file "MT6589_Android_scatter_emmc.txt" of the ROM you want to flash.
10.Make sure the checkbox "DL DA All With Check Sum" is CHECKED
11.Click on "Firmware->Upgrade" button.
12.Plug in your powered down phone via the USB cable again. See it flash.
13.When a big green circle appears on the screen, your are done!
Click to expand...
Click to collapse
The tutorial is good.
Good Luck.
stympy said:
The tutorial is good.
Good Luck.
Click to expand...
Click to collapse
Downloading going a little slow but should be done in an hour or so, thanx again stympy, will let you know what happens. Regards
stympy said:
The tutorial is good.
Good Luck.
Click to expand...
Click to collapse
Sorry about the excess of messages stympy, ive downloaded the files but when i enter flash tools it says i must download ? It has also said PMT changed for the rom ?
It works !!! Thank you man !!!
Hey there Stympy, could you possibly tell me, are there different modem drivers for the phone in the file i downloaded ? Cause my 1st sim that works on 3g at 900 mhz doesnt want to work no more. Was thinking of just flashing with the original s124 that you posted a while back http://forum.xda-developers.com/lenovo-p780/general/lenovo-p780-8-gb-stock-rom-s124-140403-t2742170 . Was working more than perfect for me. Regards
AndroidLion said:
Hey there Stympy, could you possibly tell me, are there different modem drivers for the phone in the file i downloaded ? Cause my 1st sim that works on 3g at 900 mhz doesnt want to work no more. Was thinking of just flashing with the original s124 that you posted a while back http://forum.xda-developers.com/lenovo-p780/general/lenovo-p780-8-gb-stock-rom-s124-140403-t2742170 . Was working more than perfect for me. Regards
Click to expand...
Click to collapse
Did you tried all my posted modems in How about some modems post?
Be carrefoul use those modems from folder: Modems for S221 LATEST UPDATE.
Be carrefoul all modems who worked in S123, S124 ar no more working in S214,S221,S222.
You are going to flash them for nothing.
stympy said:
Did you tried all my posted modems in How about some modems post?
Be carrefoul use those modems from folder: Modems for S221 LATEST UPDATE.
Be carrefoul all modems who worked in S123, S124 ar no more working in S214,S221,S222.
You are going to flash them for nothing.
Click to expand...
Click to collapse
Thanx for the reply, i havent seen your post stympy, do you mean if i flash the modems in the folders i downloaded it wont work ?
Is it easy to flash to stock rom ?
Thank You
AndroidLion said:
Thanx for the reply, i havent seen your post stympy, do you mean if i flash the modems in the folders i downloaded it wont work ?
Is it easy to flash to stock rom ?
Thank You
Click to expand...
Click to collapse
This modems are to be flashed from TWRP or CWM.
You cannot flash from stock recovery.
Iff you want to change your stock recovery to custom here are the stock images.
stympy said:
This modems are to be flashed from TWRP or CWM.
You cannot flash from stock recovery.
Iff you want to change your stock recovery to custom here are the stock images.
Click to expand...
Click to collapse
Thanx bud, unfortunately i dont have TWRP or CWM installed or know how to install it.
I see you said if i want to change from stock to custom but you gave me stock images ? Confused
I take it S124 is the ROM before the kit kat update, think i would prefer a stock phone for now, do i just download the stock rom with SP Flash tool, has anything else changed ?
Thank you. Regards
My Device was on firmware version RMX2202_11.C.15 GDPR, it wasnt the latest one and software update wasn't pushing the latest ota package for my device which is RMX2202_11.C.25 GDPR.
So, i decided to rollback to RUI2.0 and update again and that might solve the problem. i unlocked my bootloader, booted on twrp, flashed rollback "RMX2202_11.A.17 GDPR" package, wipe data, boot into system.
All good till now, software update pushed me 700MB ota package, i download and installed it. Device asks for reboot i rebooted my device , device went off. DEAD no sign of life. only EDL MODE.
no recovery, no bootloader, no vibrate , no bootloop , completely DEAD. Then i took it to realme service center, they tried to flash my device , they got some error they returned my phone and said we cant repair because your device is rejecting firmware.
i attached the msm tool error. (WCSM communication failed (WCSM code: 4009 SW version of this package is not found in WCSM.)
PLEASE HELP ME!
Try to Change A computer?
DestoryG said:
Try to Change A computer?
Click to expand...
Click to collapse
i tried from different computers. 4 5 may be
Can i try with your phone ?
xuanhoang1811 said:
Can i try with your phone ?
Click to expand...
Click to collapse
Thanks for your reply.
I fixed my phone with the help of some technician online, he successfully flashed c.15 firmware using oplus flash tool v4.1.0.
Thank god and thanks to technician, my phone came back to life again.
But still my phone's software update is not pushing ota package. If you have solution please suggest me.
XxMinixX said:
View attachment 5766719
Click to expand...
Click to collapse
Mine still stuck at 11.c.05 i use this phone for about 3 months but still no updates
XxMinixX said:
Mine still stuck at 11.c.05 i use this phone for about 3 months but still no updates
Click to expand...
Click to collapse
i am able to update my phone to the latest ota. i can help you if you want
Ashim Adhikari said:
Thanks for your reply.
I fixed my phone with the help of some technician online, he successfully flashed c.15 firmware using oplus flash tool v4.1.0.
Thank god and thanks to technician, my phone came back to life again.
But still my phone's software update is not pushing ota package. If you have solution please suggest me.
Click to expand...
Click to collapse
Can you recommend me your technician? My GT is stuck in boot loop. Technician here says it has no recovery or something similar, and is still waiting for a recovery file for GT for it to be fixed. Thanks!
vlmapalo said:
Can you recommend me your technician? My GT is stuck in boot loop. Technician here says it has no recovery or something similar, and is still waiting for a recovery file for GT for it to be fixed. Thanks!
Click to expand...
Click to collapse
his website is MOD EDIT: URL REMOVED | READ AND FOLLOW XDA FORUM RULES
Ashim Adhikari said:
his website is https://www.kreatifintech.com/
Click to expand...
Click to collapse
paid service advertising, you have been reported
Ashim Adhikari said:
his website is MOD EDIT: URL REMOVED | READ AND FOLLOW XDA FORUM RULES
Click to expand...
Click to collapse
All this thread maked for advertise some indian guys)))