Is there a 4.4.2 room that supports audio over USB and comes with the s-pen apps?
Anyone have any recommendations? Hoping gchilds slimrom handles this.
So far, none of the non TW 4.3 & 4.4 ROMs I have tried have working USB audio. I finally broke down and bought a Bluetooth enabled radio for my truck and have never looked back.
Sent from my BN NookHD+ using Tapatalk
mising said:
So far, none of the non TW 4.3 & 4.4 ROMs I have tried have working USB audio. I finally broke down and bought a Bluetooth enabled radio for my truck and have never looked back.
Sent from my BN NookHD+ using Tapatalk
Click to expand...
Click to collapse
Thanks. So if I want to continue using a dock with USB audio . Have to stick with an older rom?
What is the most stable rom that does support USB audio?
I'm still running jellybeans. Stable and really have no reason to upgrade. Just want to play.
Anything newer than that?
jamesavery22 said:
Thanks. So if I want to continue using a dock with USB audio . Have to stick with an older rom?
What is the most stable rom that does support USB audio?
I'm still running jellybeans. Stable and really have no reason to upgrade. Just want to play.
Anything newer than that?
Click to expand...
Click to collapse
If you are already on Jellybeans, I would stick with that. You could also create a backup of your current ROM and just restore once you are finished checking out the new ROMs. (That is what I did when I was still tied to USB audio)
mising said:
If you are already on Jellybeans, I would stick with that. You could also create a backup of your current ROM and just restore once you are finished checking out the new ROMs. (That is what I did when I was still tied to USB audio)
Click to expand...
Click to collapse
Thanks. That's what I did to try pacman.
I'll check jellybeans and see if I have the latest version.
Thanks again.
Related
Hi guys,
Is anyone having trouble with the GS2 HDMI cable? I just bought one and when I connect it to the TV it says "connecting" and then "no signal". I know one end is the HDMI out, the other is the USB in and the side one is the usb power feed. I´ve tried the power feed by connecting it to the tv and also tried connecting it to the GS2´s usb power charger....both times no luck. If you click on "sources" the HDMI port shows up as active but there is no signal. I´ve tried in 2 different TVs and the same happens on both.
Is there something I have to activate on the phone?
I´m on 4.0.3 - baseband I9100XXIk4 - build Illusion-ICS v1.01 XXI.PB-I9100
I´ve tested with a stock GS2 and it worked...got some static and "no signal" at some point, but overall it worked. Too bad it won´t work on my ICS
rawfa said:
I´m on 4.0.3 - baseband I9100XXIk4 - build Illusion-ICS v1.01 XXI.PB-I9100
Click to expand...
Click to collapse
Are you sure HDMI-out works on this ROM? Check the ROM thread.
ctomgee said:
Are you sure HDMI-out works on this ROM? Check the ROM thread.
Click to expand...
Click to collapse
I don´t think it does. I´ll wait for the official Samsung ICS release.
Same problem with HDMI out
I have the same problem after upgrading to the official 4.0.3. Did you get it to work?
Sadly not. I guess when the official ICS comes out this will be fixed.
I have the LP7 ICS ROM and HDMI works fine. I have the Internation version of the SGSII and using Samsung's HDMI Adapter and it is powered from the mains power supply.
SO there is not a problem with ICS compared to GB.
I'm using this ROM GT-I9100_WanamLite.DXLP7.Deodexed.Stock.NO-WIPE & HDMI works perfect. It is a Samsung based ICS ROM.
Powereh said:
I'm using this ROM GT-I9100_WanamLite.DXLP7.Deodexed.Stock.NO-WIPE & HDMI works perfect. It is a Samsung based ICS ROM.
Click to expand...
Click to collapse
Is this the official ICS?
rawfa said:
Is this the official ICS?
Click to expand...
Click to collapse
erm yes?
It is just this one http://forum.xda-developers.com/showthread.php?t=1544487 but Deodexed so I can have themes & stuff.
yeah, I have the same issue
I'm trying to find ICS or JB Roms that have A2DP support. Until today I've been running Unnamed 2.2.1 which works great with my car's stereo and I'm able to stream pretty much whatever I want.
But wanting to update my phone to the latest android versions I started flashing some Roms and I haven't found one that would stream music via Bluetooth to my car's stereo.
Roms I've tried so far with no luck are:
CM9 Stable
AOKP JB (10.5.2012)
Slim Bean
SuperNexus Build 2 & 3
Aberration 1.3
Any help will be appreciated. Thank you.
I've been able to use A2DP to my car stereo on both cm9 and cm10. Make sure you delete the pairing on your stereo before connecting again after you flash a new ROM. That may be your problem.
Sent from my SGH-I777 using xda app-developers app
Lekerstein said:
I've been able to use A2DP to my car stereo on both cm9 and cm10. Make sure you delete the pairing on your stereo before connecting again after you flash a new ROM. That may be your problem.
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the response. I deleted all the saved paired devices from my car and I tried again with both CM9 stable and CM10 latest nightly and the stereo receives the song's info but it when I press play it the phone gets stuck playing on 0:01 of the song and nothing happens after that.
A2DP seems to be broken in a lot of kernels from reading around the dev forum. Try a different one.
Edit: Kernel, not rom.
raduque said:
A2DP seems to be broken in a lot of kernels from reading around the dev forum. Try a different one.
Edit: Kernel, not rom.
Click to expand...
Click to collapse
Thanks for the response. I installed CM9 stable with the next kernels:
Siyah-v4.1.6-mswap
N.E.A.K-2.0.6x-AOSP
fluxi-xx-I777-7-29-2012
And still no luck getting a2dp working. I'm starting to think that it might be my car's stereo, I have clarion head units on all 3 of my vehicles and they all use "Parrot bluetooth module" whatever that means.
What I still find weird is that the Rom I'm running right now works great, so I guess I'll be running GB while I figure out how to get this working with a ICS or JB Rom.
I too am having the same problem with the A2DP support. I just flashed my 1st ROM on my GS3 and I'm not getting any audio through my car stereo speakers. Are most of the JB ROMS lacking this support? By looking at most of the posts, A2DP support seems to be broken. Almost makes we want to revert back to stock ICS :crying:
ROM currently running: Codename Android 3.6.6
neuroaxon said:
I too am having the same problem with the A2DP support. I just flashed my 1st ROM on my GS3 and I'm not getting any audio through my car stereo speakers. Are most of the JB ROMS lacking this support? By looking at most of the posts, A2DP support seems to be broken. Almost makes we want to revert back to stock ICS :crying:
Click to expand...
Click to collapse
GS3?
wanna go to the wall?
neuroaxon said:
I too am having the same problem with the A2DP support. I just flashed my 1st ROM on my GS3 and I'm not getting any audio through my car stereo speakers. Are most of the JB ROMS lacking this support? By looking at most of the posts, A2DP support seems to be broken. Almost makes we want to revert back to stock ICS :crying:
Click to expand...
Click to collapse
To the wall!
Sent from wherever I'm at
neuroaxon said:
I too am having the same problem with the A2DP support. I just flashed my 1st ROM on my GS3 and I'm not getting any audio through my car stereo speakers. Are most of the JB ROMS lacking this support? By looking at most of the posts, A2DP support seems to be broken. Almost makes we want to revert back to stock ICS :crying:
ROM currently running: Codename Android 3.6.6
Click to expand...
Click to collapse
Aaaaaand fail. People just love our forum don't they.
Phalanx7621 said:
Aaaaaand fail. People just love our forum don't they.
Click to expand...
Click to collapse
Or you could look at it this way: He's providing another data point that says that a different JB rom on a different device has the same problem. That more than likely points to a problem in JB with A2DP that is not just on the i777...
mvi57 said:
Or you could look at it this way: He's providing another data point that says that a different JB rom on a different device has the same problem. That more than likely points to a problem in JB with A2DP that is not just on the i777...
Click to expand...
Click to collapse
No, I look at it like it's about a different phone that has nothing to do with ours. And needs to be posted in the proper section.
Very bored with the OS on my View 4G..
Any options for ICS? I need STABLE.. this is in my car as nav and multimedia, so it needs to be extremely stable.
There's no Stable ROM For Ics.
GB or HC
R0flC0pt3r said:
There's no Stable ROM For Ics.
Click to expand...
Click to collapse
I got tired of using gingerbread and wanted the USB Device Host feature so i can use my ps3 controller.
Installed Dexters Jellybean 1.7 , works great except, you cant make phone calls anymore.
3G works for web/ remote desktop, but once u call someone, theres no audio back and forth.
Gonna try a work around so i can use voip / call forwarding.
Middl3man said:
I got tired of using gingerbread and wanted the USB Device Host feature so i can use my ps3 controller.
Installed Dexters Jellybean 1.7 , works great except, you cant make phone calls anymore.
3G works for web/ remote desktop, but once u call someone, theres no audio back and forth.
Gonna try a work around so i can use voip / call forwarding.
Click to expand...
Click to collapse
I believe the wired mic option works with Dex' build.
Hmm. Might have to check it out. Did you install on a View or Flyer?
R0flC0pt3r said:
There's no Stable ROM For Ics.
Click to expand...
Click to collapse
and jellybean too
No stable ics or jb rom? Not sure I agree with that statement. I recently installed YNC's CG rom, and it's been at least as stable as HTC's honeycomb build. Granted I haven't yet put the GPS or bluetooth through a good workout (both crucial to a setup in a car), but for everyday use around the house it has been rock solid.
rickwood said:
No stable ics or jb rom? Not sure I agree with that statement. I recently installed YNC's CG rom, and it's been at least as stable as HTC's honeycomb build. Granted I haven't yet put the GPS or bluetooth through a good workout (both crucial to a setup in a car), but for everyday use around the house it has been rock solid.
Click to expand...
Click to collapse
can you give me the link? i wanna try it
There are still a few features yet to be implemented: front facing camera, usb otg, and a couple of others. So read the first post to see the full list of things that aren't yet functional. But if (like me) you don't ever use one of those features, this build is very good (and has been extremely stable for me). Here's the link:
http://forum.xda-developers.com/showthread.php?t=1673430
So after many people telling me that the only way to accomplish what I want is to root...I did. For the first time ever, in over 5 years of Android ownership. So will itemize the issues at at hand and ask relevant questions and state what I have done within each one. But first, you should know I rooted using this method http://forum.xda-developers.com/showthread.php?t=2026938 and I have SuperSU version 1.25, and still running stock ROM and I am S-On.
Issue 1: Wifi tether.
I have downloaded Wifi Tether version 3.2 Beta 2 and I got it to work. The issue is, is there a better performing app or a way to get this one to perform faster? I get about 2mbps on speedtest.net on my phone while the tethered devices get 0.72mbps..I want to get the same on both. Anybody know how?
Issue 2: LTE connectivity.
Many know the LTE connectivity on LTE Evo sucks the big one. So now that I am rooted, what can I do to improve it? Specific ROM? Specific App? custom radio drivers?
Issue 3: Bluetooth
Within my 3 questions here, I am obviously also asking for ROM recommendations, but I have heard certain ROMs break bluetooth and I wanna avoid that at all costs. But the real issue is not the latter. My concern is AVRCP bluetooth profile. I need it to be version 1.3 or higher in order for my phone to send track/album art info to my car's Display Audio/Navigation screen. This is something I have been trying to figure out for years, I posted many threads on this here http://forum.xda-developers.com/showthread.php?t=1728786 and here http://forum.xda-developers.com/showthread.php?t=1702047 and also here http://forum.xda-developers.com/showthread.php?t=1553950
The difference is that back then, I was not willing to root, but now, I'm already rooted.
So shoot me some solutions, and forever change my life! O well respected community of android tinkerers!
Now for issue 3 (bluetooth), if you guys know a way to get this issue http://forum.xda-developers.com/showthread.php?t=1702047 to work, that would also help me. Here is the OP post quoted
darkleafar said:
So I just recently upgraded from an Evo 3D to the Evo 4g LTE, and the phone is gorgeous and all, but I've lost a major feature and it is scaring the hell out of me, I hope you guys can help:
Intro to my problem:
I have a 2012 Prius V, which has built in Bluetooth and an USB port. My Evo 3D lacked the right level of bluetooth AVRCP profile needed in order to display track names, artwork, etc, on my Prius Nav screen through bluetooth. So to work around that, I would plug in my Evo 3D into the Prius's USB port, then I would select "Disk drive/USB mass storage mode" on the phone and voila! My car saw all my music, complete with track names, album artwork, etc.
My main problem:
All of my music is in my 16GB MicroSD card, so I figured just putting it into my new LTE Evo would suffice...but it didnt. When I plug in my LTE Evo, the "Disk drive/USB mass storage mode" NO LONGER triggers my car detecting it. I noticed a new option, called "Media Sync." Selecting that WILL trigger my car dectecting the phone storage, but it ONLY detects the BUILT IN phone storage, not what's on my MicroSD card.
What's even worse...
Also, if you are wondering, the LTE Evo, despite having Bluetooth 4.0, STILL DOES NOT have the right level of AVRCP needed to display album artwork and track names over bluetooth. I was very, extremely disappointed when I realized this. I ve always been a loyal Anti-Apple/Pro-Windows/pro-Android kinda tech guy, but how come Iphones have been able to do this (track names and album artwork over bluetooth) for several years and this new super phone of ours cannot?
Where I need your help:
How can I make it so that my car can recognize my MicroSD card, not just my phone's storage?
I'm not gonna be forced to stick my music into my phone's built in storage instead of my MicroSD card, am I?
Isnt there any software/firmware or mods/rooting stuff I can do to enable tracknames and album artwork over bluetooth on this phone, since it already has bluetooth 4.0 after all?
Well, thank you very much for your time and I hope y'all have some awesome answers, more than greatly appreciated.
Click to expand...
Click to collapse
1.MeanBean Rom I get awesome tether speeds
2. Known issue there is no fix
3. MeanBean Rom
Sent from my EVO using xda premium
scoot0073 said:
1.MeanBean Rom I get awesome tether speeds
2. Known issue there is no fix
3. MeanBean Rom
Sent from my EVO using xda premium
Click to expand...
Click to collapse
So you know for a fact MeanBean ROM will fix both bluetooth AVRCP profile issue and Wifi tether speeds? Cuz if so, sir, you just made my day!
darkleafar said:
So you know for a fact MeanBean ROM will fix both bluetooth AVRCP profile issue and Wifi tether speeds? Cuz if so, sir, you just made my day!
Click to expand...
Click to collapse
Mean bean fixes only your #1 issue...
1.3 AVCRP Bluetooth profile is not available even on a custom kernel, since meanbean uses stock kernel with elemental X over clock modules, it doesn't have the fix for your issue #3, I've read somewhere else about this feature that even the iphone has but not this phone... Good Luck!
Sent from my EVO using xda app-developers app
jocarog said:
Mean bean fixes only your #1 issue...
1.3 AVCRP Bluetooth profile is not available even on a custom kernel, since meanbean uses stock kernel with elemental X over clock modules, it doesn't have the fix for your issue #3, I've read somewhere else about this feature that even the iphone has but not this phone... Good Luck!
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
I was told CyanogenMod fixed this. Any truth to this claims?
Yea I miss read about the Bluetooth part, my bad Homie
Sent from my EVO using xda premium
Im running cyanogen mod but my car stereo doesn't have that profile so I can't test for you, plus I haven't been able to drive in a month after a surgery... I remember somebody asking thicklizard about this feature in his arc reactor thread and also in the meanbean thread... Maybe you can pm a kernel developer and see what's involved into getting this feature to work on our phones...
Sent from my EVO using xda app-developers app
jocarog said:
Im running cyanogen mod but my car stereo doesn't have that profile so I can't test for you, plus I haven't been able to drive in a month after a surgery... I remember somebody asking thicklizard about this feature in his arc reactor thread and also in the meanbean thread... Maybe you can pm a kernel developer and see what's involved into getting this feature to work on our phones...
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Dude I just rooted for the first time ever. I could not begin to tell you who develops kernels to save my life. But I would have to be S-Off for a custom kernel, right? Anybody with Cyanogen Mod wants to chime in on whether AVRCP 1.3 or higher is present?
Holy crap! A google search answered my own question, they claim AVRCP 1.3 was working on Cyanogen Mod 10.0 but that it broke on 10.1. Link here https://jira.cyanogenmod.org/browse/CYAN-20
So, can I just flash 10.0 to my phone? what is the difference between 10.0 and 10.1? are they both jellybean builds?
And another thing, the wife was testing the wifi tether on my phone with her I PAD and connection breaks after about 15 minutes. So it looks like it isnt working after all. I just like turns off by itself. Anybody know why this could be?
darkleafar said:
And another thing, the wife was testing the wifi tether on my phone with her I PAD and connection breaks after about 15 minutes. So it looks like it isnt working after all. I just like turns off by itself. Anybody know why this could be?
Click to expand...
Click to collapse
There is a setting that can be turning it off in the app by itself or it could be the jellybean task killer what rom is she using? And yea you can flash cm 10.0, is jellybean 4.1; cm 10.1 is jellybean 4.2... If you are s-on just remember to extract the boot.img and flash it on fastboot with this command: fastboot flash boot boot.img.
Good Luck!
jocarog said:
There is a setting that can be turning it off in the app by itself or it could be the jellybean task killer what rom is she using? And yea you can flash cm 10.0, is jellybean 4.1; cm 10.1 is jellybean 4.2... If you are s-on just remember to extract the boot.img and flash it on fastboot with this command: fastboot flash boot boot.img.
Good Luck!
Click to expand...
Click to collapse
BUt i was just told if I have RUU 3.16 then i have to downgrade to 3.15 because the 3.16 touchscreen drivers are too new and have not been implemented into the kernel in any AOSP ROMs. correct?
darkleafar said:
BUt i was just told if I have RUU 3.16 then i have to downgrade to 3.15 because the 3.16 touchscreen drivers are too new and have not been implemented into the kernel in any AOSP ROMs. correct?
Click to expand...
Click to collapse
Correct, for that you need to be s-off... Backup all of your stuff and head over to the dirty Racun thread or Facepalm...in the original android development section...
Will Snow Leopards stock AT&T rom located in developers forum restore/provide MHL connection ability?
Edit: Sorry for mispelling your name Snow. It won't happen again.
alliance1975 said:
Will Snow Leopords stock AT&T rom located in developers forum restore/provide MHL connection ability?
Click to expand...
Click to collapse
which ROM does it not work for you with? Also the adaptor needs to be powered by micro usb , and the order that the cables get connected seems to matter. Connect to phone last, trial and error for other two.
adfurgerson said:
which ROM does it not work for you with? Also the adaptor needs to be powered by micro usb , and the order that the cables get connected seems to matter. Connect to phone last, trial and error for other two.
Click to expand...
Click to collapse
I'm on CM 11-20140104-NIGHTLY-e970
Monitor: ACER AL1917W (DVI connection)
Micro USB-DVI adapter: iKross MHL
Connecting LGOG last indicates no connection. I am certain LGOG is powering since screen remains on.
It is why I ask if returning to SnowLeopords stock rom will restore MHL.
alliance1975 said:
I'm on CM 11-20140104-NIGHTLY-e970
Monitor: ACER AL1917W (DVI connection)
Micro USB-DVI adapter: iKross MHL
Connecting LGOG last indicates no connection. I am certain LGOG is powering since screen remains on.
It is why I ask if returning to SnowLeopords stock rom will restore MHL.
Click to expand...
Click to collapse
You could likely even just use a different AOSP-base rom, no need to go all the way back to 4.1.
I know for a fact that Houstonn's 4.3 PA builds work with MHL, and I believe the official CM10.2 build also work.
alliance1975 said:
I'm on CM 11-20140104-NIGHTLY-e970
Monitor: ACER AL1917W (DVI connection)
Micro USB-DVI adapter: iKross MHL
Connecting LGOG last indicates no connection. I am certain LGOG is powering since screen remains on.
It is why I ask if returning to SnowLeopords stock rom will restore MHL.
Click to expand...
Click to collapse
I can confirm it is working on Beanstalk 4.4 also , using Samsung MHL that came with Infuse.
Do you know what kernel has MHL support for CyanogenMod?
XDFernando said:
Do you know what kernel has MHL support for CyanogenMod?
Click to expand...
Click to collapse
I installed the Beanstalk 4.4 rom which included the slimkat kernel. The mhl worked. I purchased a rocketfish adapter and plugged it into my hdmi tv and all seemed well. Unfortunately my LGOG started to get very hot. I reverted to my old CM 4.4 with cm kernel and heat problem solved but alas no mhl output.
alliance1975 said:
I installed the Beanstalk 4.4 rom which included the slimkat kernel. The mhl worked. I purchased a rocketfish adapter and plugged it into my hdmi tv and all seemed well. Unfortunately my LGOG started to get very hot. I reverted to my old CM 4.4 with cm kernel and heat problem solved but alas no mhl output.
Click to expand...
Click to collapse
i dont like overclocked kernels another good one with mhL?
XDFernando said:
i dont like overclocked kernels another good one with mhL?
Click to expand...
Click to collapse
I will be trying cm 10.2 shortly and let you know.
alliance1975 said:
I will be trying cm 10.2 shortly and let you know.
Click to expand...
Click to collapse
cm10.2 mhl works. Joy.
Edit: Recent developments suggest I was wrong regarding the 10.2 rom. I reinstalled it and it seems to be working fine. I cannot get my dvi monitor to work but my hdmi tv works great. So I must purchase an hdmi monitor in order to have my LGOG serve as my desktop PC.
My thanks to OMGMatrix for suggesting 10.2 as a solution.
@XDFernando, try the 10.2. I think you will find it easy to get along with.
CM11 now supports mhl
I upgraded from 10.2 to 11 last night and tried connecting to my hdtv and lo-an-behold it mirrored my LGOG, even rotated the view.
I have also not working
CM11 MHL Working
I'm pleased to announce that I have reached my goal of replacing my desktop computer with my LGOG. I use bluetooth mouse and keyboard and connect my LGOG to an $80 LED HDTV via MHL adapter. I was inspired by this blog http://www.livingdigitally.net/2012/02/using-a-mobile-device-as-a-desktop-computer.html. YouTube videos now play through MHL without a problem. My thanks to the CM11 post by shellnut. I'm using the latest CM11 nightlies with the gapps-kk-20140105 and 3.4.0-CM+ kernel. Pretty neat.