Related
He factory resetted it while I was on a custom ROM (IHO). Here is a video of how it boots..
but now after each reboot
it says delete calvik etc and all
then gets to IHO logo
and freezes
reflash your rom from clockwork?
Jameslepable said:
reflash your rom from clockwork?
Click to expand...
Click to collapse
Thank you for replying, I forgot to mention my phone will not boot into custom recovery.
Ziion said:
Thank you for replying, I forgot to mention my phone will not boot into custom recovery.
Click to expand...
Click to collapse
Use kdz
and flash firmware again
Ziion said:
He factory resetted it while I was on a custom ROM (IHO). Here is a video of how it boots..
but now after each reboot
it says delete calvik etc and all
then gets to IHO logo
and freezes
Click to expand...
Click to collapse
Try this, its the ONLY thing that worked(for me) & was simple
http://forum.xda-developers.com/showthread.php?t=1324105
ur6beersaway said:
Try this, its the ONLY thing that worked(for me) & was simple
http://forum.xda-developers.com/showthread.php?t=1324105
Click to expand...
Click to collapse
viv_jen said:
Use kdz
and flash firmware again
Click to expand...
Click to collapse
I constantly see people advising the tools to flash firmware on the optimus V.
None of those people have an optimus V, or they'd probably know that LG never released flashable firmware for the optimus V.
I wish that LG weren't such F***S and had released working firmware for the optimus V!
They did not, at Virgin Mobile's request, I assume, because the VM510 firmware is broken just like the VM670 firmware; however the LN510 firmware is valid, and the LS670 firmware works too. (LN510=sprint rumor touch, VM510=virgin mobile rumor touch; LS670=sprint optimus, VM670=virgin mobile optimus)
you cannot install the stock LG virgin firmware, the .cab files are missing a .dll inside that decodes the contents of the .cab to the files needed by the flashing software.
If you install the Sprint optimus firmware on the Virgin optimus, it will flash because the phone board model number is the same, but the network data and MMS will be broken. Permanently. There is no way to revert to Virgin firmware without sending the phone to LG.
If you can't get the phone to respond to ADB, you're toast at this point and have to send the phone for service or replace it or give up your data service and flash sprint firmware.
You may be able to get adb to respond briefly during the 'formatting' loop in recovery. If so, it is probably fixable, post again to let me know and I'll try to walk you through what you have to do in that case.
I borked my first OV with a bad AOSP build without working ADB, it installed the built recovery which wouldn't respond to any keypresses or ADB. I flashed the sprint firmware rather than toss out all hope for the phone, and fought with it for a month trying to get data working again. If you find another way to fix it, please post it up for others! Won't help me, my first OV was flashed to death trying to hack a working version of the sprint firmware dll to unpack the virgin firmware.
Hey All...need your expertise a particular issue that I'm facing. I flashed my P765 offline with the P760 JB kdz. flashed cm10.1. faced some issues so I returned to ICS with my cwm backup. Now when I try to flash either ICS or JB kdz with LG Update tool, it wont do it and I get stuck at 4% and it tells me to connect my phone with my computer - which I have already done (all drivers installed).
Attached is a screenshot and a log from the update tool. Hoping someone can guide me here. BTW - I have uninstalled and re-installed all drivers.
I have the same problem...
Did u try using cwm backups in the forum? If that works, try flashing kdz again n see :good:
Gh0sT.RPG said:
Did u try using cwm backups in the forum? If that works, try flashing kdz again n see :good:
Click to expand...
Click to collapse
Yup....i am on my cwm backup(ics)..tried flashing jb kdz again, but it keeps doing the same thing.
fab0004 said:
Yup....i am on my cwm backup(ics)..tried flashing jb kdz again, but it keeps doing the same thing.
Click to expand...
Click to collapse
Then this s a serious problem, i cant help u further sorry requesting other members to look into this
Is there any way to lock the bootloader? Оr someone upload backup оf JB?
arman4o said:
Is there any way to lock the bootloader? Оr someone upload backup оf JB?
Click to expand...
Click to collapse
hey all...i think I solved it...don't manually put your phone in software mode. Keep it powered on and in LG software mode. flash kdz using update tool and the tool will automatically put the phone in software mode.
arman4o, let me know if this works for ya !!!:good:
Yes It works! Thank you very much! Work on p760
[Solved][P765] LG Update Tool Error After Flashing JB
Glad it helped!!!
fab0004 said:
hey all...i think I solved it...don't manually put your phone in software mode. Keep it powered on and in LG software mode. flash kdz using update tool and the tool will automatically put the phone in software mode.
arman4o, let me know if this works for ya !!!:good:
Click to expand...
Click to collapse
to me does not help. maybe because I unlocked botlooader.
I think that's the problem.
Currently i have :crying:the V10H but I'd be happy to come back again to JB
I think I have Beckup.
i Was trying to wipe the card and i found CWM backup I hope that this is a version of JB
great
fab0004 said:
hey all...i think I solved it...don't manually put your phone in software mode. Keep it powered on and in LG software mode. flash kdz using update tool and the tool will automatically put the phone in software mode.
arman4o, let me know if this works for ya !!!:good:
Click to expand...
Click to collapse
Thats good workaround which solves this new problem. :good:+1
aleksa2210 said:
to me does not help. maybe because I unlocked botlooader.
I think that's the problem.
Currently i have :crying:the V10H but I'd be happy to come back again to JB
I think I have Beckup.
i Was trying to wipe the card and i found CWM backup I hope that this is a version of JB
Click to expand...
Click to collapse
Hey i have an unlocked bootloader too....i actually tried this a second time and it worked...ensure that you have all drivers installed.
Help
I back to v10a, but my MicroSD Card does not work, any idea? My phone is P768g
Thanks!
cmahendra said:
Thats good workaround which solves this new problem. :good:+1
Click to expand...
Click to collapse
LuigiGDL said:
I back to v10a, but my MicroSD Card does not work, any idea? My phone is P768g
Thanks!
Click to expand...
Click to collapse
Format your Sd card with mini partition,with primary not logical option n fat 32 file system. ..
Sent from my LG-P760 using xda premium
solved
I found out what is the problem. My computer has too many USB devices while the power supply is not the brightest. probably due to variations in voltage of 5V I had a problem updating. I disconnected bluetooth and external HDD after which everything is done regularly.
fab0004 said:
hey all...i think I solved it...don't manually put your phone in software mode. Keep it powered on and in LG software mode. flash kdz using update tool and the tool will automatically put the phone in software mode.
arman4o, let me know if this works for ya !!!:good:
Click to expand...
Click to collapse
your are a champion,i was a bit to eager and flashed my wifes p768 with the jelly bean rom for the p760,bad idea,camera did not work anymore and apps like talk came back with error messages.tried to flash it back to ics but that was a no go with the manual option of sw mode,stopped constantly at 15% saying phone or device not connected.tried your option as last resort et voila' it worked like a charm.ics back on the phone
camera working again and no error msg's.
have to say but that the upgrade in general to jb on a lg phone does not seem to be a huge step,when i flashed my galaxy s2 to jelly bean that phone had like a whole new feel about it,feature and smoothness wise.
either way u made my day m8:laugh::good:
sgrurru said:
your are a champion,i was a bit to eager and flashed my wifes p768 with the jelly bean rom for the p760,bad idea,camera did not work anymore and apps like talk came back with error messages.tried to flash it back to ics but that was a no go with the manual option of sw mode,stopped constantly at 15% saying phone or device not connected.tried your option as last resort et voila' it worked like a charm.ics back on the phone
camera working again and no error msg's.
have to say but that the upgrade in general to jb on a lg phone does not seem to be a huge step,when i flashed my galaxy s2 to jelly bean that phone had like a whole new feel about it,feature and smoothness wise.
either way u made my day m8:laugh::good:
Click to expand...
Click to collapse
Happy it worked my friend !!!:good:
Hey, i was attempting to unlock my boot loader which i didn't complete. How can i fix the inverted screen? Please
Also, my menu and left keys aren't working.
mr.noob said:
Hey, i was attempting to unlock my boot loader which i didn't complete. How can i fix the inverted screen? Please
Also, my menu and left keys aren't working.
Click to expand...
Click to collapse
Its simple, what are you running ? (Ex 20b 10g... Etc)
-Sent From My Unlocked Optimus L9
carloswii5 said:
Its simple, what are you running ? (Ex 20b 10g... Etc)
-Sent From My Unlocked Optimus L9
Click to expand...
Click to collapse
20F Tmobile
Thank the posters of these links please, if you run into a similar problem. I did reflash tmobile kdz and re-rooted my phone then i installed cwm from this link:http://forum.xda-developers.com/showthread.php?t=2095825
and flash the stuff from this: http://forum.xda-developers.com/showpost.php?p=45398238&postcount=11
mr.noob said:
Thank the posters of these links please, if you run into a similar problem. I did reflash tmobile kdz and re-rooted my phone then i installed cwm from this link:http://forum.xda-developers.com/showthread.php?t=2095825
and flash the stuff from this: http://forum.xda-developers.com/showpost.php?p=45398238&postcount=11
Click to expand...
Click to collapse
Did this work for anyone? I couldnt get cwm to install via Artas on v20f. thus couldnt flash the touchscreen fix.
HDStatus said:
Did this work for anyone? I couldnt get cwm to install via Artas on v20f. thus couldnt flash the touchscreen fix.
Click to expand...
Click to collapse
Flash tmboile kdz, root, install busybox, and super su, then install recovery. Exactly what i did.
Hallo guys,
I´m sorry for new thread but can somebody create tutotial, how to root this device? A lot of tuts do not work, because 4.4.2 (KitKat) blocks the rooting. (I tried for example Vroot, Towelroot, etc. but nothing is working )
Cralost said:
Hallo guys,
I´m sorry for new thread but can somebody create tutotial, how to root this device? A lot of tuts do not work, because 4.4.2 (KitKat) blocks the rooting. (I tried for example Vroot, Towelroot, etc. but nothing is working )
Click to expand...
Click to collapse
4.4.2 can not be rooted (proper permanent root) !
You will have to install stock JB (4.1.2) via .kdz , then root, install CWM recovery, update or flash to stock KK (4.4.2), and then from recovery to root agin.
All you need is in this threads first page:
http://forum.xda-developers.com/show....php?t=2730501
http://forum.xda-developers.com/show....php?t=2652201
Cisf said:
4.4.2 can not be rooted (proper permanent root) !
You will have to install stock JB (4.1.2) via .kdz , then root, install CWM recovery, update or flash to stock KK (4.4.2), and then from recovery to root agin.
All you need is in this threads first page:
http://forum.xda-developers.com/show....php?t=2730501
http://forum.xda-developers.com/show....php?t=2652201
Click to expand...
Click to collapse
So, I will flash old ROM (unofficial) by kdz flasher, than I will root (for example towelroot), how to install CWM? Also by flasher? And update, will it be also offical update to choose (by LG) and than root it?
And, if something will be wrong, for example softbrick, what can I do?
wrong answer
Wrong answer to wrong answer
Cralost said:
So, I will flash old ROM (unofficial) by kdz flasher, than I will root (for example towelroot), how to install CWM? Also by flasher? And update, will it be also offical update to choose (by LG) and than root it?
And, if something will be wrong, for example softbrick, what can I do?
Click to expand...
Click to collapse
1 - flash old rom (OFFICIAL) via kdz flasher
2 - root - Cydia impactor http://forum.xda-developers.com/showthread.php?t=2448085
3 - install recovery - CWM Recovery for example http://forum.xda-developers.com/showthread.php?t=2652201
//the hole point so far is so u have a custom recovery so that u can "force install/patch" the root
4 - flash 4.4.2 kdz / or update via normal ways (LG update from phone, or from LG PC Suite )
5 - enter CWM Recovery, and apply the root for 4.4.2 http://forum.xda-developers.com/showthread.php?t=2754633
And u are done !
The phone cant be hardbriked (from what i know, and most moder phones cant be hardbiricked). If u softbreak it, try the steps where it crashed, untill will work. (i had to try to install the kdz 20 times - i belive i had some cable/power issues with the pc). Also, do all this with the phone battery fully charged !!! (in case it does go wrong, u have enough hours of battery left to make it work)
Please, can you post me which specifically ROMs I should download? I'm a bit lost in ROMs.
Cralost said:
Please, can you post me which specifically ROMs I should download? I'm a bit lost in ROMs.
Click to expand...
Click to collapse
from http://lg-phone-firmware.com/index.php?id_mod=37 :
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW629486573210987654321/D60510A_00.kdz or http://www.filedropper.com/d60510a00 (same file) - EU OPEN - this is the first .kdz u need
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW102695432109876543213/D60520A_00.kdz - this is the second .kdz (4.4.2) - u dont need it if u upgrade via normal phone upgrade
Have you any more v10 EU? One is broken (logo LG is still refreshing and second one is 404) when I flashed on 20A EU again, it is working as before with all apps and settings.
May I download for example czech or italian version, or where is problem?? What I do wrong?
Cralost said:
Have you any more v10 EU? One is broken (logo LG is still refreshing and second one is 404) when I flashed on 20A EU again, it is working as before with all apps and settings.
May I download for example czech or italian version, or where is problem?? What I do wrong?
Click to expand...
Click to collapse
Download links work fine for me !
U can download czech or any country, doesn't matter.
After u install the .kdz, u must reset the phone (it formats the cache , davlik, data, etc....) (when u put 20A again, all the original user data was intact, because the phone was not reseted).
http://www.hard-reset.com/lg-optimus-l9-ii-d605-hard-reset.html ( http://www.youtube.com/watch?v=YkzJlLY3T1k )
After u install the CWM you will be able to clear cashe, data, etc .. from the CWM Recovery menu.
A bit of reading the forums, wouldn't hurt either .....
edit: also note that the first boot takes a lot of time .... if it is more than 20 minutes than something went wrong. Try a few times to be sure, and then reinstall.
Sure, I have read it, but now I have problem with booting. I reinstall it several times, but the logo of LG is there for a long time ( sound and animation are repeated) - I left it maybe 5 min (could not be turned off - only remove battery), when it didn´t work, aj flashed again v20. So I am going to try it once again with czech kdz and leave it more time. I will prey
Cralost said:
Sure, I have read it, but now I have problem with booting. I reinstall it several times, but the logo of LG is there for a long time ( sound and animation are repeated) - I left it maybe 5 min (could not be turned off - only remove battery), when it didn´t work, aj flashed again v20. So I am going to try it once again with czech kdz and leave it more time. I will prey
Click to expand...
Click to collapse
Again, you dont need the cz .kdz ! Use the one u got. After the kdz flasher finishes, RESET the phone! That is the "magic" step!
Cisf said:
Again, you dont need the cz .kdz ! Use the one u got. After the kdz flasher finishes, RESET the phone! That is the "magic" step!
Click to expand...
Click to collapse
I know, I dont need, but I had already downloaded it. Now, it is working, Thanks a lot!
Sorry for that, but how to get into recovery? I did all, but when I update on 4.4.2, I cannot get to recovery. I tried from terminal (nothing) and app called reboot recovery (it reported, I need root) and manualy (vol+ and power) also didnt work. Before update everything worked (on old kdz).
Cralost said:
Sorry for that, but how to get into recovery? I did all, but when I update on 4.4.2, I cannot get to recovery. I tried from terminal (nothing) and app called reboot recovery (it reported, I need root) and manualy (vol+ and power) also didnt work. Before update everything worked (on old kdz).
Click to expand...
Click to collapse
from: http://forum.xda-developers.com/showthread.php?t=2730501
[Q] How to boot to CWM without root?
[A]
1. Reinsert battery
2. Hold Power+Vol Up+Home for about ten seconds a white text appears, that says "Release all buttons" you have 500ms time if it reboots start from step 1 again.
YOU HAVE TO BE VERY EXACT! (If you once installed CWM you have it even when you flashed KK .zip)
or activate in settings, developer options, and then usb debugging. Connect with the pc and issue the command from there. I dont know the exact command, u shuld read the forum thread above... i belive is there (not sure). Anyway on this, google is a good friend.
Cisf said:
from: http://forum.xda-developers.com/showthread.php?t=2730501
[Q] How to boot to CWM without root?
[A]
1. Reinsert battery
2. Hold Power+Vol Up+Home for about ten seconds a white text appears, that says "Release all buttons" you have 500ms time if it reboots start from step 1 again.
YOU HAVE TO BE VERY EXACT! (If you once installed CWM you have it even when you flashed KK .zip)
or activate in settings, developer options, and then usb debugging. Connect with the pc and issue the command from there. I dont know the exact command, u shuld read the forum thread above... i belive is there (not sure). Anyway on this, google is a good friend.
Click to expand...
Click to collapse
Command for that is:
Code:
adb reboot recovery
Cisf said:
1 - flash old rom (OFFICIAL) via kdz flasher
2 - root - Cydia impactor http://forum.xda-developers.com/showthread.php?t=2448085
3 - install recovery - CWM Recovery for example http://forum.xda-developers.com/showthread.php?t=2652201
//the hole point so far is so u have a custom recovery so that u can "force install/patch" the root
4 - flash 4.4.2 kdz / or update via normal ways (LG update from phone, or from LG PC Suite )
5 - enter CWM Recovery, and apply the root for 4.4.2 http://forum.xda-developers.com/showthread.php?t=2754633
And u are done !
The phone cant be hardbriked (from what i know, and most moder phones cant be hardbiricked). If u softbreak it, try the steps where it crashed, untill will work. (i had to try to install the kdz 20 times - i belive i had some cable/power issues with the pc). Also, do all this with the phone battery fully charged !!! (in case it does go wrong, u have enough hours of battery left to make it work)
Click to expand...
Click to collapse
Everything is very nicely explained only one thing I don't understand. In order to install cm11, do I need to have root on 4.4.2 or can I flash the rom from rooted JB with CMW(to skip step 4 and 5 or is it necessary)? I hope you understand what I wanna ask. Thanks!
Sent from my LG-D605 using XDA Free mobile app
thecoldone123 said:
Everything is very nicely explained only one thing I don't understand. In order to install cm11, do I need to have root on 4.4.2 or can I flash the rom from rooted JB with CMW(to skip step 4 and 5 or is it necessary)? I hope you understand what I wanna ask. Thanks!
Click to expand...
Click to collapse
Once u got CWM installed, u dont care about anything else. So yes, after root on JB, and then CWM, you can install cm11 or what ever u want.
Cisf said:
Once u got CWM installed, u dont care about anything else. So yes, after root on JB, and then CWM, you can install cm11 or what ever u want.
Click to expand...
Click to collapse
Thank you so much!!
Sent from my LG-D605 using XDA Free mobile app
hello,
to thank colleagues for advice and links to topics
I am surprised that no one gave link on the forum:
http://forum.android.com.pl/f1211/root-stock-recovery-4-4-2-a-439890/
where there is already some time given way to root the firmware that runs on v20a and v20d to him to write it on v20d at the moment there is only one method specified on the Polish forum, greet and welcome to
http://forum.android.com.pl/f1211/
Delete this thread please
Thank U Bro.....
darkdipu said:
Thank U Bro.....
Click to expand...
Click to collapse
You're welcome
iam.mash said:
This is for those people who face brick after boot logo change fail
How to use
1.Open odin
2.place this on BL tab
And flash
Hope that it will work for J700H USER
thank you.
https://drive.google.com/file/d/0B-U6ByQzc2qKTVo5UFNCejZnY28/view?usp=drivesdk
Click to expand...
Click to collapse
Will ti make me get back to lollipop ?
Don Shehab said:
Will ti make me get back to lollipop ?
Click to expand...
Click to collapse
Nope it will make you boot up.
If you want to get back to lolipop after you able to bootup you need to follow the step which you will find in youtube or xda forms how to go back to lolipop.
iam.mash said:
Nope it will make you boot up.
If you want to get back to lolipop after you able to bootup you need to follow the step which you will find in youtube or xda forms how to go back to lolipop.
Click to expand...
Click to collapse
My bootloader is locked i can't getback to lollipop unless unlocked the bootloader but idon't know how
Don Shehab said:
My bootloader is locked i can't getback to lollipop unless unlocked the bootloader but idon't know how
Click to expand...
Click to collapse
Which variant you have??
iam.mash said:
Which variant you have??
Click to expand...
Click to collapse
J700h
Don Shehab said:
J700h
Click to expand...
Click to collapse
Than use this bootloader inshallah your hand set will be alright and also hope that you can go back to lolipop.
am currently using lolipop version.Because its smother and give me batter battery backup.
iam.mash said:
Than use this bootloader inshallah your hand set will be alright and also hope that you can go back to lolipop.
Click to expand...
Click to collapse
My phone is working perfectly fine but the only problem that i can't get back to lollipop
Don Shehab said:
My phone is working perfectly fine but the only problem that i can't get back to lollipop
Click to expand...
Click to collapse
First flash lolipop firmware
With odin untick autorebot
When its flashed directly open youre battery
And turn on but dont let your device boot up then again turn on with vol up + power + home which take you to recovery then wipe data and reset factory
Then rebot and you will get successfully lolipop version.
Hope it will work its worked for me and am using it.
iam.mash said:
First flash lolipop firmware
With odin untick autorebot
When its flashed directly open youre battery
And turn on but dont let your device boot up then again turn on with vol up + power + home which take you to recovery then wipe data and reset factory
Then rebot and you will get successfully lolipop version.
Hope it will work its worked for me and am using it.
Click to expand...
Click to collapse
Hey bud, Ive got a J700T, am in serious need of the most recent BL for TMobile (AQF1). Any ideas where to get it? Dealing with what I suspect is a minor mismatch issue that is failing Googles SafetyNet API despite being totally stock now.
If you're wondering - I reflashed the existing AQF1 HOME file from sammobile to unroot, buuut then discovered the HOME file had everything but the BL. So I figure theres a remnant change left in mine thats flagging Googles API.( Lucky I didnt attempt changing versions or i'd be bricked and ticked.)