Any help would be appreciated. I just purchased my Note 3 today and wanted to root it. After unboxing I was notified that there was an update available and I did not install it. I then came here to get files needed to root my phone. I have the stock MJ4 and just wanted to get root access so I chose the CF autoroot method. I downloaded this file, CF-Auto-Root-hltespr-hltespr-smn900p. I then unzipped and place into a folder I created on my desktop labeled Note 3 root and then had 3 files in the folder:
1. Odin3
2. Odin3-v3.07
3. CF-Auto-Root-hltespr-hltespr-smn900p.tar.md5
I then ran Odin as administrator and placed the above tar file in the PDA slot and checked it. i then put phone into download mode and then connected to my computer and Com:08 showed in blue in upper left box. I clicked start and it said passed and the phone rebooted and will not stop rebooting. I pulled the battery and tried to boot up, but nothing boots. I then changed usb ports and attempted to root again with same result. I downloaded a Stock MJ4 tar file and attempted to load using Odin, but it will not boot up. Odin says pass every time.
Go into stock recovery And factory reset
The cf root was probably the one for kit kat. .. This will be your lesson learned now be careful
Sent from my SM-N900P using Xparent BlueTapatalk 2
Try flashing a recovery see if you can get into recovery mode.
Fixed
Thanks for the suggestion Epix4G, but I was not able to get into android system recovery. I went over and used my desktop computer instead of my laptop and was able to load the.tar file and it booted up just fine. I guess there is some setting on my computer that Odin or my phone did not like. Either way, I am back up and running.
Make sure on the computer you were having problems with you have Kies installed and the right drivers.
Related
hi im having trouble getting CWM to work on my Rogers (GT-P7500R) WIFI+4G to accept CWM, I have trying to flash it and it sends my galaxy tab into a boot crash...I had to to restore it to stock kernel with ODIN 1.85 which worked fine, but still on the stupid default recovery (I HATE IT). as soon as I try and flash it with the CWM it simply turns off the tablet and then when I power on again, it shows the samsung galaxy tab logo for a second and then turns off again, then i use odin to flash stock and it works normal again, no data lost at all...any help plz, cause without CWM im pretty sure i cannot do other stuff like custom rom, kernels, overclocking...HELP!!!!!!!!!! im pretty sure this has a signed only bootloader right?? thats why i need something other then 3e recovery to be able to flash stuff
FIXED!!!!
so see below
Good work
Keep us posted! I pick mine up tonight and will be following your foot steps haha thanks for the info so far.
Hi,
so here is how to get clockworkmod on the samsung galaxy tab 10.1 (GT-P7500R)...I looked around XDA for hours before finding some useful info...here it is:
Step 1
download these files:
http://www.4shared.com/file/KbSJhFtI/recovery-cwm_4004-sam-tab-101t.html
and
http://www.4shared.com/rar/74D8ERjO/Odin_v185.html
Step 2
extract the odin zip file and run odin, by right clicking first and say run as administrator...reboot the phone into download mode (ask me if u do not know how , there will be a warning and then a screen with some text in the upper left, connect you device to the usb, and back in odin select the bootloader check box and click browse to the right and select the other recovery-cwm file u downloaded and click start, it should take a short time and you will see a progress bar on the screen...viola, you will have clockworkmod
OPTIONAL: if you want to root it at this time, just follow below:
Download this file:
http://www.4shared.com/zip/cVgtnw_t/Galaxy_root.html
Step 3
put the file in root of the device and reboot into recovery mode (ask me if u do not know how and select update from zip and select the file, then its done and done.
OPTIONAL: if you want to put a custom kernal on, so that you can overclock it to 1.4 ghz, like I have then follow below...it worked and works fine for me
Download this file:
http://www.4shared.com/zip/vWdGcQcr/boot-cm_26364_p4_ux_hc32-oc-xt.html
and follow from step 3 again.
PS: I also have a stock kernal for the rogers edition of the galaxy tab if needed, if u mess it up in the future
Overcome has a good working version of cwm and custom rom that install easily on the Rogers Tab -- the OC kernel by Pershoot works fine. The custom rom by Genbarou also installs well.
Im also on XDA on my tab too...
Sent from my GT-P7500R using xda premium
Help.. XDA'er In Need...
theandroidnerd said:
Hi,
so here is how to get clockworkmod on the samsung galaxy tab 10.1 (GT-P7500R)...I looked around XDA for hours before finding some useful info...here it is:
Step 1
download these files:
http://www.4shared.com/file/KbSJhFtI/recovery-cwm_4004-sam-tab-101t.html
and
http://www.4shared.com/rar/74D8ERjO/Odin_v185.html
Step 2
extract the odin zip file and run odin, by right clicking first and say run as administrator...reboot the phone into download mode (ask me if u do not know how , there will be a warning and then a screen with some text in the upper left, connect you device to the usb, and back in odin select the bootloader check box and click browse to the right and select the other recovery-cwm file u downloaded and click start, it should take a short time and you will see a progress bar on the screen...viola, you will have clockworkmod
OPTIONAL: if you want to root it at this time, just follow below:
Download this file:
http://www.4shared.com/zip/cVgtnw_t/Galaxy_root.html
Step 3
put the file in root of the device and reboot into recovery mode (ask me if u do not know how and select update from zip and select the file, then its done and done.
OPTIONAL: if you want to put a custom kernal on, so that you can overclock it to 1.4 ghz, like I have then follow below...it worked and works fine for me
Download this file:
http://www.4shared.com/zip/vWdGcQcr/boot-cm_26364_p4_ux_hc32-oc-xt.html
and follow from step 3 again.
PS: I also have a stock kernal for the rogers edition of the galaxy tab if needed, if u mess it up in the future
Click to expand...
Click to collapse
I was able to load the CWM Recovery onto my Rogers 4G Tab, however I flashed with the files from here initially:
http://forum.xda-developers.com/showthread.php?t=1171089
using the 4G Recovery and Kernel files. This created nothing but boot loop. I was then able to use the CWM file from this post and get CWM to boot however that is all I can do at this time.
I cannot get the device to connect to PC for usb storage (to potentially load a bootable rom) while in CWM as it says "unable to open ums lunefile (no such file or directory).
I believe the kernel.zip file from the other post has messed up my device. Does anyone have a Stock Rogers Kernel, or custom that is flashable via ODIN so I can at least get back to Android OS and load a Rom via USB?
Also can someone repost the Galaxy_root.zip file. I cant download from 4shared. Keeps timing out to file not found. THANKs
macknup said:
I was able to load the CWM Recovery onto my Rogers 4G Tab, however I flashed with the files from here initially:
http://forum.xda-developers.com/showthread.php?t=1171089
using the 4G Recovery and Kernel files. This created nothing but boot loop. I was then able to use the CWM file from this post and get CWM to boot however that is all I can do at this time.
I cannot get the device to connect to PC for usb storage (to potentially load a bootable rom) while in CWM as it says "unable to open ums lunefile (no such file or directory).
I believe the kernel.zip file from the other post has messed up my device. Does anyone have a Stock Rogers Kernel, or custom that is flashable via ODIN so I can at least get back to Android OS and load a Rom via USB?
Also can someone repost the Galaxy_root.zip file. I cant download from 4shared. Keeps timing out to file not found. THANKs
Click to expand...
Click to collapse
I dont know if this will help but you need to know that its not a 4G, its actually 3G+ so if you want to root, dont use the 4G method
I installed the cwm without any problem by following this thread:
http://forum.xda-developers.com/showthread.php?t=1171089
and by following this :
RETAIL 3G
[GTP7500]
1. Download this Root.zip file to your tablet and move it to root directory of tablet storage. (you can also download on comp. then transfer to tablet)
2. Reboot tab and go into recovery mode and apply the root.zip you just downloaded.
3. Then reboot
rooted already
For CWM
1. After rooting download and install Rom Manager from market.
2. open Rom Manager app and have it install clockwork Mod to your device, you should see your device listed within Rom manager.
3. Done.
I was unable to even get the device to recognize by PC. I could not load any zip files. Luckily I found a P7105 fille ODIN file that I was able to load. however it is a WIFI ONLY version I have. However it has enabled me to boot back to android and load files via usb. I am going to try OVERCOME 10.1 and hope that applies the necessary root as well as 3G access.
will report back
macknup said:
I was unable to even get the device to recognize by PC. I could not load any zip files. Luckily I found a P7105 fille ODIN file that I was able to load. however it is a WIFI ONLY version I have. However it has enabled me to boot back to android and load files via usb. I am going to try OVERCOME 10.1 and hope that applies the necessary root as well as 3G access.
will report back
Click to expand...
Click to collapse
Can confirm. Installing CWM then flashing Overcome FULL did wonders. Back up and running. 3.2 android and 3G+ service active.
WAAAHHOOOO! XDA to the rescue!
Some rom?
Hello, thanks for the tutorial, I'm from Venezuela and I have a 7500R if anyone needs Spanish translation let me know. Will you have some rom recommended for a 7500R
Sorry for my English.
I want to confirm that rooting method post here work great.
(This is the only part you need)
RETAIL 3G
[GTP7500]
1. Download this Root.zip file to your tablet and move it to root directory of tablet storage. (you can also download on comp. then transfer to tablet)
2. Reboot tab and go into recovery mode and apply the root.zip you just downloaded.
3. Then reboot
Note 1: The downloaded file is not named Root.zip. You can of course rename it yourself.
Note 2: To enter recovery mode, after you use vol- to highlight the recovery icon, power button didn't seem to work in selecting it. But you just wait for a min, it'll work.
Note 3: It only takes seconds to load and run the Root.zip. Then you are good to reboot, and it's done.
------
My GT10.1 -
Rogers GT-P7500R
Android 3.2 P7500RUXKK2 (stock; now rooted)
GT-P7500R
i need to go back to stock os i find some that say stock but when i go into my STATUS my IMEI is UNKNOW IMEI SV is UNKNOW the sim card not reading please help
I am trying to install a stock or custom recovery mode for the time being. I have lost the recovery mode trying to install a custom ROM. Now no matter what I do, I just can't install a recovery mode.
CWM - odin's progress bar is stuck on 0%
TWRP - odin crashes after you click start on the program
Installing from SD Card - soft bricks the phone since it will force into recovery mode.
I truly need a lot of help and would appreciate any assistance or someone to message to guide me step by step. Thanks.
birkinx said:
I am trying to install a stock or custom recovery mode for the time being. I have lost the recovery mode trying to install a custom ROM. Now no matter what I do, I just can't install a recovery mode.
CWM - odin's progress bar is stuck on 0%
TWRP - odin crashes after you click start on the program
Installing from SD Card - soft bricks the phone since it will force into recovery mode.
I truly need a lot of help and would appreciate any assistance or someone to message to guide me step by step. Thanks.
Click to expand...
Click to collapse
Have you tried starting over from scratch? In other words reinstall factory software, root, etc.......
birkinx said:
I am trying to install a stock or custom recovery mode for the time being. I have lost the recovery mode trying to install a custom ROM. Now no matter what I do, I just can't install a recovery mode.
CWM - odin's progress bar is stuck on 0%
TWRP - odin crashes after you click start on the program
Installing from SD Card - soft bricks the phone since it will force into recovery mode.
I truly need a lot of help and would appreciate any assistance or someone to message to guide me step by step. Thanks.
Click to expand...
Click to collapse
Just in case -- flashing with Odin may require that you are using the stock Samsung USB cable. Are you?
Everything on it is still factory stock, except it is rooted which has been working properly for some time. Worst case scenario I might have to redo this. This is my first custom rom installation basically.
It's the stock USB cable that came with the Note. And I also tried different USB ports.
birkinx said:
Everything on it is still factory stock, except it is rooted which has been working properly for some time. Worst case scenario I might have to redo this. This is my first custom rom installation basically.
It's the stock USB cable that came with the Note. And I also tried different USB ports.
Click to expand...
Click to collapse
What's the exact filename you are trying to flash? I remember when flashing recovery to my Note (AT&T-branded Note), I loaded cwm-touch-i717-120414.tar.md5 into the "PDA" field of Odin version 1.85 and left the check-boxes as-is.
Have you used Odin ever before to flash this phone? I'm wondering if the driver has been installed so your PC can recognize the Odin mode that the phone is in. I recall the driver I used was USB_Driver_for_ATT_I717_Galaxy_Note_v1_3_2200_0.exe
LaZiODROID said:
What's the exact filename you are trying to flash? I remember when flashing recovery to my Note (AT&T-branded Note), I loaded cwm-touch-i717-120414.tar.md5 into the "PDA" field of Odin version 1.85 and left the check-boxes as-is.
Have you used Odin ever before to flash this phone? I'm wondering if the driver has been installed so your PC can recognize the Odin mode that the phone is in. I recall the driver I used was USB_Driver_for_ATT_I717_Galaxy_Note_v1_3_2200_0.exe
Click to expand...
Click to collapse
I've used Odin before to root my phone and had no problems with it. The file names are:
openrecovery-twrp-2.3.1.1-sgh-879.img.tar.md5 (Crashed Odin)
clockworkmod_touch_recovery_5.8.4.3_i717.tar (Odin had no progress)
openrecovery-twrp-2.3.1.1-i717.img.tar.md5 (Crashed Odin)
I can't find any of the latest version of CMW or TWRP for a CM10 installation that works.
Someone correct me if I'm wrong but since you're rooted, can't you install goo manager and have it install the recovery?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Ye you could install it from there or from ROM manager either way though quick ? Is Ur USB cable a good working one? Have you tried attempting the odinizing through another pc? That's for the fella havn issues.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
additionally have a look at this link:
http://rootgalaxynote.com/galaxy-no...y-note-sgh-i717-icsgingerbreadeasiest-method/
I've used it twice and it's very easy to follow. download the zip they have under "sponsored link" and use the Tar in the zip. Also verify that your phone is being seen by your computer, it should display in your device manager as well as show a COM in odin.
USB is fine, no bends, kinks, or frays. The computer recognizes the cord for charging and accessing the phone and the Yellow or Blue COM shows up properly in Odin. I tried the GooManager to install TWRP and it downloads the recovery, says it is installing it and after about 10 minutes goes back to the home screen. No successful installation notification or anything. ROMmanger just fails for me. It shows my recovery as 5.X.X.X and when trying to flash it just hangs on the Flashing popup forever until the screen turns off or a button is press or the screen is touched.
The phone is rooted fine, I just need to put the samsung recovery, twrp, or cwm on it to update it to the latest version to install CM10. Right now there is no recovery mode, just download mode for Odin.
birkinx said:
USB is fine, no bends, kinks, or frays. The computer recognizes the cord for charging and accessing the phone and the Yellow or Blue COM shows up properly in Odin. I tried the GooManager to install TWRP and it downloads the recovery, says it is installing it and after about 10 minutes goes back to the home screen. No successful installation notification or anything. ROMmanger just fails for me. It shows my recovery as 5.X.X.X and when trying to flash it just hangs on the Flashing popup forever until the screen turns off or a button is press or the screen is touched.
The phone is rooted fine, I just need to put the samsung recovery, twrp, or cwm on it to update it to the latest version to install CM10. Right now there is no recovery mode, just download mode for Odin.
Click to expand...
Click to collapse
If you tried installing all those recoveries in odin and failed, I would try starting over from scratch. When people soft brick their phones they go here and follow instructions. That link has an odin .tar prepared with the stock AT&T Kernel, System, and Recovery. Notice it says RECOVERY! After flashing that in odin you should be able to boot into recovery and take over from there.
Try that and report back!
I have an idea...do away with Odin altogether
but it's advanced and could potentially brick you.
Take a tar with the recovery you wanna use and extract that file. Take recovery.img and put it on your sd-card (put it on the internal and external sd-card just to be sure).then connect to pc.
Now Issue the following adb command. I SUGGEST YOU COPY AND PASTE IT, IF YOU TYPE IT WRONG YOU WILL HARD BRICK YOUR PHONE
adb shell dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p22
I AM NOT RESPONSIBLE IF YOU BRICK
Hello I bought my P7500 in Malaysia from an independent computer store (not tied to a carrier) about 2 years ago and I recently decided that I'd like to check out CM before I buy my next android device to see if it's important to me to be able to have CM on my next tablet. I took the files from the CM's wiki on how to install CM on the P4. I'm able to get into download mode on the tablet and successfully install the CWM according to Odin 1.85. After I reboot though I still have the standard Samsung recovery binary and when I attempt to repeat the steps it says;
Reason: Force Key,
Secure Mode: Secure,
Check Signature: Check,
Custom Binary download: No (0 count),
Current binary: Samsung Official.
I'm using the official cable that came with the device (sometimes it's finicky about connecting) and Windows downloaded the drivers for it when I first connected the device to my PC. The only other thing I can think of is it has an official version on ICS 4.0.4.
Any help on why I'm having these issues.
Once you've installed cwm, then boot into recovery. Its the other icon when you boot into download mode. It should show a customized recovery rather than the stock one. I believe the infos you gave was from download mode right?
Sent from my GT-P7500 using Tapatalk HD
Fixed
Ok I figured it out. The problem seems to be that Odin needed to be restarted for each of the 3 different files that the CM instructions are telling you to install with it. I decided to try it in reverse recovery.tar.md5 -> modem.tar.md5 -> bootloader.tar.md5 and noticed only the 1st file is loaded properly. So if your following the instructions at wikic[dot]cyanogenmod.org/w/Install_CM_for_p4 then you need to know to restart Odin between each file.
Actually I think you should read this thread http://forum.xda-developers.com/showthread.php?t=2074202. It has all the information you need and contains the right gapps for our device if you want to flash cm10.1.
Sent from my GT-P7500 using Tapatalk HD
xtertristl said:
Ok I figured it out. The problem seems to be that Odin needed to be restarted for each of the 3 different files that the CM instructions are telling you to install with it. I decided to try it in reverse recovery.tar.md5 -> modem.tar.md5 -> bootloader.tar.md5 and noticed only the 1st file is loaded properly. So if your following the instructions at wikic[dot]cyanogenmod.org/w/Install_CM_for_p4 then you need to know to restart Odin between each file.
Click to expand...
Click to collapse
I can tell you this... on the epic 4g touch... Odin doesn't like to try and flash more than one thing at a time...
I'm not sure how you went about using Odin, but if you need any help... I'm always around..
So I'm selling my Note 2 and yesterday I did a reset but the device went to a bootloop, doesn't pass the flashing Samsung Logo.
My Device was using L900SPTBMK4 and I want to do a restore. Kies doesn't recognize it when in Download mode, does it when is on the loopboot but never finished the connection, stuck a connecting.
In odin the device isn't recognized when in download mode either, as Kies, it recognize the device when stuck a the bootloop. I don't to if is safe to try a flashing in this mode.
Using ODIN v3.09
Autoreboot checked
F. reset Time checked
I don't remember what download mode I suppose to choose from BL/AP/CP
I also have this file L900VPUBMK4_L900SPTBMK4_HOME.tar.md5 to try the flashing if recommended.
Thank you for the support
Forgot to tell, I don't have any recovery option installed.
I just can go to the Download Mode
Guys, the device has been recognized by Odin on my work PC.
Just need to know what file is the correct to be flash by Odin and what option do I need to check,
Regards
:laugh:
Downloaded SPH-L900_MK4_Full Restore_UNROOTED (Compressed Archive) and after that I ran it, was uncompressed and the I ran the uncompressed file called SPH-L900_MK4_Full Restore_UNROOTED.exe with the device in download mode and everything worked like a charm.
From the beginning I understood that this was what has to be done but of course 'my awareness' was about the correct file need it.
Thank you
HELP!! Sinple issue ?? Custom Rom Question.
Ok, First I want to Say Thanks for all you do.
Now, My Question is :
I am successfully Flashing any and every rom I try using cwm.
My Problem occurs after flashing and successfully rebooting into new custom Rom, I am running the new Roms. Tweaking and Tinkering with ROM just fine.
but if I run out of battery or somply reboot or turn off my Sprint Note 2 L900, It DOES not boot back into the rom?? What am I Missing or Not doing ? How Can I get it to stick thru turning off and on ??
Any Help is appreciated, Just cant get it to boot everytime like Stock Rom does out of the box.
Thanks !!
Hi! So friend 1 had asked me to help him root and flash CM on his S3 and I gladly helped. We were having a tough time doing it although I did it quite easily on friend 2's s3. Friend 3 chipped in to help us out by asking us to use Kingroot and let it root the S3. I thought it was ok and we let it do its thing. After it was "rooted" we tried flashing CM. There was an error during the process and it said it couldn't read the binary or something like that. I then wiped /system through TWRP thinking that it would revert everything back to stock. Well, obviously it wiped Android. I am so bad with Samsung phones xD Unfortunately, I did get ahead of myself and did not backup the phone when it still had Touchwiz. Good thing is, I can still access TWRP and download mode. I've already downloaded a stock rom for the s3. Now, how do I flash it? Are there any other solutions?
Thanks
EDIT: I, of course, have Odin and through download mode, would happily flash the stock rom mentioned above. However, Odin only accepts certain types of files such as .tar and .md5 files. Are there any websites that host stock roms ending in .tar or .md5?
Download stock rom from sammobile.com. The downloaded stock rom was compressed with winrar. Extract the downloaded file, you will get .md5 file. Put your phone into download mode connect your mobile to pc. open odin click pda select extracted .md5 file click start wait for 5 min after flashing complete odin will show pass. Unplug your mobile from pc. Goto recovery mode wipe data then reboot system. first boot will take 10 min.