Hi. First time here and first post.
I have a Cloudfone 430X_FS201302 with Android version 4.0.4.
I cannot detect any USB device other than my PC connection.
I ran a USB Host Diagnostics v1.32 and it says:
Android API Device detected No
Kernel Device detected No
I guess this is why a OTC or any other USB thing will not work. I was considering ROOTING it. But i do not know if doing that would actually fix this or allow it to be fixed. Also this is my first fone of this kind and i have never rooted a fone before.
Is rooting the way to go here or is there another way to fix this.
Thanks
W
Related
Hello all, ive got a new Tablet the GoClever TAB I71 works good but i wanted to root the device. There the problem started i didnot get a USB cable to connect it to my PC co im stuck whit the rooting APK programs but any of them are working. Currentli im running Android 2.3.3. Tryed GingerBreak 1.30, zRoot, nothing i wanted to try the SuperOnClick method but i dont hawe a cable the tablet doesent have a standart mini/micro USB but a wired connector for the USB/ETH Hub. Can anyone help me root this device ? Thx
Some weeks ago, my Xperia U stopped detecting my USB cable as a USB cable.
It all happened one day, when the battery became weak (<15%) and I plugged the USB cable. The XU started to blink the charging light non stop, with the warning popup having the same behaviour in the OS (appearing, disappearing, appearing, disappearing...). So I unplugged it, thinking that it should be a problem with my computer USB port and plugged it to electricity. Only some days later, when I plugged it again to the computer, I came to realize that the problem was in the XU because it wasn't detecting that a USB cable was connected but it was charging normally like it should and it still does until this day (it still changes plugged to electricity too, no problem there).
Things I've tried so far:
- Enable/disable debug mode does nothing;
- Tested with friends' USB cables without any success;
- When I tried to boot into flashmode, Windows tried to install some driver and stopped with no warning;
- On a Linux machine, I checked the connected by USB devices and there was an error concerning the device but I couldn't figure it out what was it.
So, it seems like the USB cable detection is dead and I want to send it to warranty to have them checking the problem, but I have my XU rooted and it's with a stock ROM but not the one it should be (it's with that French one when ICS firstly came out).
That said, my question here is if there's anyway I can unroot and install my provider stock ROM (the ROM file is not a problem) without using the USB cable, so I don't have any problem with the warranty. I've used WiFi ADB app with success since I can connect to my device and perform adb commands, but I don't know what I can do with it to help me solve my problem...
Thanks in advance for your answers.
you can via Wi-FI channel's built to give ROM memory? If so, tell and through Wi-Fi ADB flash tis ROM, unless of course will
Yes, I can send the stock ROM file with ADB WiFi to my XU, but I don't know if flashing with 'just' ADB works, because I've always used Flashtool for flashing... Could you explain with more details, please?
I've been occupied and in need of my XU, and so I still haven't send it to the warranty, but I wanted to do it this week... So, is there anyone that can help me?
I'd be really greatful if you could tell me how you got flash tool to detect the XU. After installing a custom rom my device won't stay in flashmode. I have ALL the drivers.
TomHempt said:
I'd be really greatful if you could tell me how you got flash tool to detect the XU. After installing a custom rom my device won't stay in flashmode. I have ALL the drivers.
Click to expand...
Click to collapse
Man, that doesn't even make sense on this thread. Please, start a new thread or reply on one that fits your problem.
Hello. I have this problem when i start my phone it's stuck on the QMobile Logo. I left it charging for many days still not working. Because of a font i installed using font installer *root*. The first time i used it it didn't ask me for rebooting. But it changed the font. So i rebooted automatically (i rooted it b4 + Jelly bean 4.1.1). I didn't like the font so i changed it. This time it asked me and i pressed yes. And then the problem appeared. Someone told me to unroot it. The problem is that my phone is not recognizable. I used PDANet to solve this problem but some error comes saying that my phone is not connected or not found. . Idk what to do. Help plz? I can unroot it with the program i used for rooting it. But i only want to know how do i let my PC recognize the phone? I used PDANet + There was this installation file called "Micromax A110_Drivers_x86". I used it too but no use.. My phone won't be recognized. Help plz
You could try to factory reset your phone from the recovery if all else fails.
Qmobile A10 Charging but not detecting in pc via USB
Hi. Its my first post
I have two questions
1. When I connect my qmobile A10 to pc, it starts charging but does not connect to pc. My pc does not detect it
2. I want to install firmware on my a10. As pc is not detecting mobile, so I cannot root it. Is there any way to root the mobile without pc. And if not, can I install firmware without rooting my qmobile A10.
Please help.
Hi everyone, I've been having some serious problems with the usb connection of my samsung galaxy fame (GT-S6810L)
1) I intended to root the phone, but the adb console wouldnt recognise the phone
2) I intended to flash a new rom from odin and maybe root later ... but odin didnt recognise it neither
3) Finallly, I gave up and said to myself "**** it, im sticking with this rom, with my tablet i dont need gaming, so i dont need rooting ...". But when I went to load some music into the phone .... oh yes, the computer didnt recognise the mass usb storage system !
I tried with 3 different cables, all usb ports and A LOT of drivers (official and unnoficial) i found out there ... i also tried the generic ones i used to root my chinese tablet thorugh ADB, but no luck. I havent tried Kies because my pc is a piece of s$%& and it could possibly explode
I think the problem would be in the drivers, because i tried plugin in another phone (samsung galaxy Y pro, GT-B5510L) and the pc didnt recognise it as well
The worst of all is that when I plug the phone into my pc, it recognises that im pluging in something, but I cant work on it
This is what I get:
(i cant post the links of the pictures, but the hardware manager shows a new menu that goes "Android Phone" with a submenu that goes "Samsung Android Interface")
I NEED help, please ............. I might throw this piece of crap in any moment
Thanks in advance
PD: i have winXP 32bit
Answer
Lucho505 said:
Hi everyone, I've been having some serious problems with the usb connection of my samsung galaxy fame (GT-S6810L)
1) I intended to root the phone, but the adb console wouldnt recognise the phone
2) I intended to flash a new rom from odin and maybe root later ... but odin didnt recognise it neither
3) Finallly, I gave up and said to myself "**** it, im sticking with this rom, with my tablet i dont need gaming, so i dont need rooting ...". But when I went to load some music into the phone .... oh yes, the computer didnt recognise the mass usb storage system !
I tried with 3 different cables, all usb ports and A LOT of drivers (official and unnoficial) i found out there ... i also tried the generic ones i used to root my chinese tablet thorugh ADB, but no luck. I havent tried Kies because my pc is a piece of s$%& and it could possibly explode
I think the problem would be in the drivers, because i tried plugin in another phone (samsung galaxy Y pro, GT-B5510L) and the pc didnt recognise it as well
The worst of all is that when I plug the phone into my pc, it recognises that im pluging in something, but I cant work on it
This is what I get:
(i cant post the links of the pictures, but the hardware manager shows a new menu that goes "Android Phone" with a submenu that goes "Samsung Android Interface")
I NEED help, please ............. I might throw this piece of crap in any moment
Thanks in advance
PD: i have winXP 32bit
Click to expand...
Click to collapse
Did you select the option of USB Debugging mode enabled when connecting to ADB??
If you didn't, then try connecting by enabling that.
As you said no other samsung devices are connecting, then you surely install driver softwares.
Here's the link to the Samsung USB Driver: http://forum.xda-developers.com/showthread.php?t=961956
If you have installed Samsung Kies, disable it first and then try to connect it in Odin or ADB!!
Press thanks if I have helped you.
Yes, i turned on USB debbuging (i rooted my tablet through ADB). I turned it back off when i tried to use mass storage, as well as double checked if the usb thetering was oof (it was)
Ive never installed kies because my pc is pretty crappy (not even 1gb ram)
Ill give that driver a try and let you know, thank you !
EDIT -------------
Those were the drivers !! I love you man !
hallo guys, i really need your help on this:
my sgs3 stopped working after running the official update (4.3)
its starts off well with the initial logo but doesnt start up beyond that.
Now my main problem is that the usb hub is broken so i have no other
means to connect the phone to the pc and sort it out through kies
or ordin.
im able to dismantle the phone completely so my question would be
are there places in the phone that i can connect the usb wires (naked wires) after
opening up the phone so that i can bypass the hub issue and have it connected to the pc?
im aware there are four important wires in the usb plug
another thing, i've tried installing firmwares from the sd card but they all
got rejected by the phone for signature reasons.
kindly help, thank you
Factory reset in recovery first, without a usb connection you can't do much.
Sent from my GT-I9300 using Tapatalk