I'm running CM 11 nightlies, usually the latest.. I've been running CWM 6.0.4.4 for as long as I can remember after initially rooting/loki patching my phone.
Last week, Rom manager notified me that there was an update to CWM, 6.0.4.7. I thought "cool" - and I flashed it via Rom manager, which reported this was a success.
However, whenever I rebooted into recovery, I still had CWM 6.0.4.4. I tried again, fail. Decided to clean flash my next nightly and try again. Same thing. Could not get Rom manager to update.
I flashed over to Twrp using goo manager which worked fine. I used Twrp to flash over to Philz touch which worked fine.. anytime I use Rom manager now though, it seemingly does nothing even though it reports a success. For example, if I am on TWRP and use rom manager to flash the latest CWM, I'll be met with a success but a reboot into recovery leaves me still with TWRP and no CWM.
I guess I'm just wondering if anyone can help me figure out what's going on -- I know I've seen others at least in the CM forum post about Rom manager acting similarly, but I also hear reports that it works fine for others. Ultimately I just ended up making a 6.0.4.7 flashable zip of my own to upgrade but I'd rather get things figured out vs make a new flashable zip anytime an updated version of CWM comes out.
vanberge said:
I'm running CM 11 nightlies, usually the latest.. I've been running CWM 6.0.4.4 for as long as I can remember after initially rooting/loki patching my phone.
Last week, Rom manager notified me that there was an update to CWM, 6.0.4.7. I thought "cool" - and I flashed it via Rom manager, which reported this was a success.
However, whenever I rebooted into recovery, I still had CWM 6.0.4.4. I tried again, fail. Decided to clean flash my next nightly and try again. Same thing. Could not get Rom manager to update.
I flashed over to Twrp using goo manager which worked fine. I used Twrp to flash over to Philz touch which worked fine.. anytime I use Rom manager now though, it seemingly does nothing even though it reports a success. For example, if I am on TWRP and use rom manager to flash the latest CWM, I'll be met with a success but a reboot into recovery leaves me still with TWRP and no CWM.
I guess I'm just wondering if anyone can help me figure out what's going on -- I know I've seen others at least in the CM forum post about Rom manager acting similarly, but I also hear reports that it works fine for others. Ultimately I just ended up making a 6.0.4.7 flashable zip of my own to upgrade but I'd rather get things figured out vs make a new flashable zip anytime an updated version of CWM comes out.
Click to expand...
Click to collapse
get the latest cwm 6.4.7 zip and flash through philz recovery make sure to apply auto loki patching (i think thats already checked never hurts to make sure though) hit power options and reboot recovery. thats my thought and u should have on screen cwm 6.4.7
FordNate said:
get the latest cwm 6.4.7 zip and flash through philz recovery make sure to apply auto loki patching (i think thats already checked never hurts to make sure though) hit power options and reboot recovery. thats my thought and u should have on screen cwm 6.4.7
Click to expand...
Click to collapse
Where do you get the 6.0.4.7 zip? I've only been able to find the .img file on the rom manager/cwm website...
Going back to my htc days n adb using it was fastboot flash flash {recovery name}.img. maybe using something like flashimgui or flashify.. just thoughts of course other than that u would need to convert to a zip file
FordNate said:
Going back to my htc days n adb using it was fastboot flash flash {recovery name}.img. maybe using something like flashimgui or flashify.. just thoughts of course other than that u would need to convert to a zip file
Click to expand...
Click to collapse
Nice! Flashify does it beautifully. CWM touch even. I cannot believe I'm just now trying this app!
What's been improved between 6.0.4.4 & 6.04.7?
Sent from my HTC6600LVW using XDA Premium 4 mobile app
joshm.1219 said:
What's been improved between 6.0.4.4 & 6.04.7?
Sent from my HTC6600LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nothing immediately apparent, I'm just OCD about running the latest/greatest.
Related
I've been using AmonRA recovery since I got the Optimus in December and I am comfortable with it. I've tried out Miks port of CM7 and while it's great, i sorely miss the battery performance I was getting on Froyo with Void and running 824mhz stable without any problems. That and bluetooth is sorely missed. I want to give OpenOptimus a shot, but I am extremely weary of trying to install Clockwork Mod again, because the one time I attempted it I ended up bricking my phone. Thankfully, the guy at the Tmo kiosk in the mall just gave me a new one no questions asked. I wouldn't be so hesitant to install CWM on my phone if I could install the img just like I did with AmonRA instead of trusting Rom manager to do it for me.
I don't suggest you to flash recovery via ROM manager. IMHO ClockworkMod is better,has much more options. If you'll flash the 3.1.0.0 version using my flashable zips you won't brick anything. And remember to give openOptimus a shot,you won't regret it
Sent from my LG-P500 using XDA Premium App
I'm not sure I understand correctly. I thought that clockworkmod was the recovery that is installed by Rom Manager. All of the instructions for installing CWM simply say to install Rom Manager. Ultimately, I do aim to install OpenOptimus but I need to switch from running AmonRA recovery to CWM recovery. And what exactly do you mean by flashable zip? I installed AmonRA using the ADB and an .img file. it there is a thread anywhere here that clearly details the process to install CWM recovery, please point me to it.
N00b-un-2 said:
I'm not sure I understand correctly. I thought that clockworkmod was the recovery that is installed by Rom Manager. All of the instructions for installing CWM simply say to install Rom Manager. Ultimately, I do aim to install OpenOptimus but I need to switch from running AmonRA recovery to CWM recovery. And what exactly do you mean by flashable zip? I installed AmonRA using the ADB and an .img file. it there is a thread anywhere here that clearly details the process to install CWM recovery, please point me to it.
Click to expand...
Click to collapse
Do you people ever use search?
http://forum.xda-developers.com/showthread.php?t=1065197 - download and flash ZIP from recovery. Done.
Sorry about that. I didn't realize that you could actually flash a recovery from within the recovery. I just switched to CWM and flashed OpenOptimus. Waiting for first boot as I'm typing this.
N00b-un-2 said:
I'm not sure I understand correctly. I thought that clockworkmod was the recovery that is installed by Rom Manager. All of the instructions for installing CWM simply say to install Rom Manager. Ultimately, I do aim to install OpenOptimus but I need to switch from running AmonRA recovery to CWM recovery. And what exactly do you mean by flashable zip? I installed AmonRA using the ADB and an .img file. it there is a thread anywhere here that clearly details the process to install CWM recovery, please point me to it.
Click to expand...
Click to collapse
yes a stated above u can just enter into recovery and flash any recovery u want from the link pointed out above and its safe ,since u already have recovery installed u dont need to flash recovery via rom manager and just remember that any backup taken from any recovery would be restored using the same recovery. To clear all doubts the problem has been solved and installing recovery from rom manger works flawlessly now. Note:Its advisable to use rommanager for ppl not having recovery installed just download the latest rom mager and flash choosig ur phone type.
slightly off topic, but does anyone know where I can get the T-Mobile branded P509 kdz stock firmware just in case I end up needing to roll back to stock? I can't seem to find it anywhere, the_ERROR's thread on howto is closed and the links don't work anymore.
N00b-un-2 said:
slightly off topic, but does anyone know where I can get the T-Mobile branded P509 kdz stock firmware just in case I end up needing to roll back to stock? I can't seem to find it anywhere, the_ERROR's thread on howto is closed and the links don't work anymore.
Click to expand...
Click to collapse
This does not work, or... ?
http://forum.xda-developers.com/showthread.php?t=1073827
nope its not safe at all using rom manager ~
I flashed CWM and my friend died a few days later.
So no it's not safe.
For me there are no problems with clockworkmod and RomManager. Flashed cwm via RomManager and everything is fine here.
Sent from my LG-P500 using XDA Premium App
XeactorZ said:
nope its not safe at all using rom manager ~
Click to expand...
Click to collapse
it not about using rom manger for flashing rom ,it just to get the cwm recovery and then going into recovery and using it from there.
Many had problems flashing rom from clockwork so that not advisable but installing cwm is fine 100% sure
M happy with CWM
Don't use tricks like ROM Manager... It's just matter of learning to use a recovery, not that difficult.. just IMHO
You just need to use ROM manager Once to get recovery. After that you can delete the program and enjoy the CWM recovery.
I have been there, I have done it, You do want it
CWM works beautifully without problems..
I use rom manager just to reboot to recovery, as i am too lazy to use the 3 button combo to goto recovery.
Flashed ROMs and zips with CWM. 100 % safe untill now..
The new updared Rom Manager has solved that issue.
Sent from my LG-P500 using XDA Premium App
How much I've learned in just a month!
I can't believe I had to ask that question. I know now that there are numerous ways to flash recoveries. My personal preference is to do it manually using the adb.
shhbz said:
Many had problems flashing rom from clockwork so that not advisable but installing cwm is fine 100% sure
Click to expand...
Click to collapse
See this: http://forum.xda-developers.com/showpost.php?p=15186637&postcount=337
No, it is not 100% fine, in fact it lacks any sanity checks whatsoever.
Just flash CWM through your current recovery and you'll be fine. It's by far the safest method. If you flash through ROM Manager and after reboot you get stuck in fastboot: http://forum.xda-developers.com/showthread.php?t=1015332 ... happened to me, unbricked it with some slight changes to the tutorial. Nothing important.
PS: If you don't use Rom Manager you can always do a $su then #reboot recovery in a terminal (Downloadable from market) to reboot directly to recovery.
CWM installed fine when I rooted but since it seems most of the Dev's are preferring TWRP to CWM I was thinking about getting rid of the CWM and installing TWRP.
I looked around but didn't see just how to do this. Anybody got a link to instructions or know what I need to do?
OR.... Am I worrying about something stupid and shouldn't worry about it?
AdRock02gt said:
CWM installed fine when I rooted but since it seems most of the Dev's are preferring TWRP to CWM I was thinking about getting rid of the CWM and installing TWRP.
I looked around but didn't see just how to do this. Anybody got a link to instructions or know what I need to do?
OR.... Am I worrying about something stupid and shouldn't worry about it?
Click to expand...
Click to collapse
I would switch to TWRP. All you need to do is flash TWRP right over CWM. You don't need to erase CWM first. Just follow the instructions for installing TWRP, and you'll be good.
http://forum.xda-developers.com/showthread.php?t=1192077
Is it possible to just install it through terminal emulator now that we have root?
oohaylima said:
Is it possible to just install it through terminal emulator now that we have root?
Click to expand...
Click to collapse
Not to my knowledge. Teamwin recommended installing it as a PG86IMG.zip for now, as that's the most reliable way to install it. You could also use fastboot to flash it if you'd want. Those are the only two ways I know to install it.
Actually, it looks like you can use Joeykrim's flash GUI app would do that...maybe research how to use it for that.
http://forum.xda-developers.com/showthread.php?t=1192527&highlight=flash+GUI+app
my opinion is Teamwins recovery wil become the standard , nothing against clockwork . Amon Ra was the king of recoveries in the EVO4G days or atleast in my mind it was . I flashed the Teamwin recovery using the PG86IMG.zip . Went very smoothly without a hitch . My only advice is when you flash to Teamwin make a backup of your stock set up then let the flashing addiction kick in .
k2buckley said:
I would switch to TWRP. All you need to do is flash TWRP right over CWM. You don't need to erase CWM first. Just follow the instructions for installing TWRP, and you'll be good.
http://forum.xda-developers.com/showthread.php?t=1192077
Click to expand...
Click to collapse
Is the same true if I want to go back to CWM? Can I use ROM Manager to install CWM over TWRP?
StEVO_M said:
Is the same true if I want to go back to CWM? Can I use ROM Manager to install CWM over TWRP?
Click to expand...
Click to collapse
Yes. There's a new touch recovery available. Search the play store for 4ext. Its a touch recovery.
Sent from my PG86100 using XDA
Latest Twrp works well. Only issues I seen in the latest was the time is off by 3 hours in the recovery and it doesn't seem to charge no red light.. But flashes everything right..
Hopefully this fixes a issue where the phone wasn't charging to green while off...
I've just started to use 4ext and so far I have no issues. TWRP works well also. I did get some restarts while in TWRP.
4eXT is going to become the standard you just don't know it yet...
(used Amon Ra, Clockwork Mod,TWRP and now 4eXT.)
I was only wondering if this was available since we can't flash recovery images on the opposite recovery. I have made a recovery image in TWRP but have not gone so far to not just flash CWM and make a recovery image that will serve as my new point zero. Just curious since I only saw flashable CWM.
MunkinDrunky said:
I was only wondering if this was available since we can't flash recovery images on the opposite recovery. I have made a recovery image in TWRP but have not gone so far to not just flash CWM and make a recovery image that will serve as my new point zero. Just curious since I only saw flashable CWM.
Click to expand...
Click to collapse
Use the Toolkit http://forum.xda-developers.com/showthread.php?t=2052788
or heres the TWRP thread but no CWM flashable http://forum.xda-developers.com/showthread.php?t=2045829
Balsta said:
Use the Toolkit http://forum.xda-developers.com/showthread.php?t=2052788
or heres the TWRP thread but no CWM flashable http://forum.xda-developers.com/showthread.php?t=2045829
Click to expand...
Click to collapse
the link you gave to TWRP recovery was exactly what i was looking for. In the TWRP website they have a flashable option for TWRP to use in whatever existing recovery you have, that is CWM for us. Under droidstyle's guide (there's the thread also in dev section too for CWM) there is also a link for flashable CWM so now im set.
Although you already found what you were looking for, you can also download/run the goo manager app, press menu->install open recovery script. That will install TWRP.
Sent from my SCH-I605
Thrillhouse847 said:
Although you already found what you were looking for, you can also download/run the goo manager app, press menu->install open recovery script. That will install TWRP.
Sent from my SCH-I605
Click to expand...
Click to collapse
I was hoping this way would let me get out but Ive now lost any custom recovery while in paranoid android. So what i did was while in Jelly Beans rom is flash CWM recovery to then flash Paranoid. I then decided to go back to beans, and i tried to flash TWRP zip that i has to restore my recovery. That failed an i have no recovery. I only have android system recovery <3e>. I am currently trying the goo manager to get me back, but so far i dont think im doing it right ill keep trying.
...So with goo manager i cant flash back to beans, i cant flash CWM back on, and ive: installed open recovery script to to install the TWRP img file but it must not have worked, but i cant see anything to indicate not.
Ok so im am stuck with just the stock recovery. In goo manager it says the recovery was installed but if is reboot to recovery its just crappy old boring stock and if i try to flash anything from goo manager it just reboots to that same stock recovery. Anyone know how to get a custom recovery back?
MunkinDrunky said:
Ok so im am stuck with just the stock recovery. In goo manager it says the recovery was installed but if is reboot to recovery its just crappy old boring stock and if i try to flash anything from goo manager it just reboots to that same stock recovery. Anyone know how to get a custom recovery back?
Click to expand...
Click to collapse
The TWRP in goo manager is not the correct one for our phone. I did the same thing and ended up in the same position as you. I used the suckitverizon file from Adams thread and odined it back on to the phone. If was in that position now I would use the newly released tool kit.
Good luck.
Geezer Squid said:
The TWRP in goo manager is not the correct one for our phone. I did the same thing and ended up in the same position as you. I used the suckitverizon file from Adams thread and odined it back on to the phone. If was in that position now I would use the newly released tool kit.
Good luck.
Click to expand...
Click to collapse
Im downloading the toolkit now but in the meantime did you have to restart the whole process in the 3 step bootloader unlock or did you just start at flashing suckitverizon version 2 in odin? Im just wondering how safe that is.
MunkinDrunky said:
Im downloading the toolkit now but in the meantime did you have to restart the whole process in the 3 step bootloader unlock or did you just start at flashing suckitverizon version 2 in odin? Im just wondering how safe that is.
Click to expand...
Click to collapse
No I did not have to start over. If I recall correctly, I put the suckit file in the pda box and hit start. You can read up on it in Adams main thread and I know there were a few other people in the same fix.
Good luck
Toolkit saved my bacon. Many lessons learned. so if i want to restore an image in twrp say from paranoid then i use cwn to flash to a rom that plays nice with twrp then flash twrp back then recover in twrp. Now if i get stuck the toolkit has the correct twrp and cwm for the verizon note ii.
spoke too soon i though at least getting cwm was all good. However the toolkit wont install TWRP which is what i have my backups made on. i followed all the step on screen and selected sch-i605 to be flashed in odin. I can only reboot into stock recovery afterwards. :crying:
http://forum.xda-developers.com/showthread.php?t=2051992 This has been asked (by me) and answered (by awesome folks with more sense than me).
ok it all over. CWM can be had by flashing zip in twrp or through tool kit. twrp i only regained by odining again the suckitverizon from Adam's unlockbootloader thread.
I flashed a half-assed version of twrp from goo manager and it doesn't work right. It's not seeing the right partitions or something. But anyways I need to re flash the correct one anyone know how? Also I'm running Linux not windows.
I did the same thing the other day on my S3. I went and downloaded CWM and then used the messed up TWRP to flash CWM. Everything turned out fine with my S3 so you might try that. Something is really screwed up with Goo cause after I installed TWRP with it it was showing folders I had deleted before I even downloaded TWRP.
Also something else that may be safer, couldn't you just use Casual to re flash TWRP and then download the latest flashable TWRP version and flash it?
Sent from my SCH-I605 using XDA Premium HD app
I have been running TWRP 2 since I got my S4. I decided to check out CWM the other day since I haven't used it in a while. Its really nice but I decided to go back to TWRP. The problem is that it doesn't seem to want to flash with goo manager and I cant seem to find any other method.
I understand that goo manager is the easiest, but is there a reason there is no odin file or other alternatives for the Verizon model S4? Its a little annoying, I loved just using fastboot with my GNex. I don't really like relying on software, I like doing it myself. The .img files are provided but I'm not sure if there is a way to manually flash them. Can I do it with ADB? I think I could package the .img up for odin but I feel like there is a reason not to do this, or the file would be available.
When I go to install recovery script, it downloads fine and says it installed. Then when I reboot its still CWM. I am able to switch between CWM and CWM touch as well, just no TWRP. I am running a Carbon ROM nightly build at the moment.
Any suggestions on how to get back to TWRP? I assume I can use odin to start over from the beginning but it seems like overkill.
thecaptain0220 said:
I have been running TWRP 2 since I got my S4. I decided to check out CWM the other day since I haven't used it in a while. Its really nice but I decided to go back to TWRP. The problem is that it doesn't seem to want to flash with goo manager and I cant seem to find any other method.
I understand that goo manager is the easiest, but is there a reason there is no odin file or other alternatives for the Verizon model S4? Its a little annoying, I loved just using fastboot with my GNex. I don't really like relying on software, I like doing it myself. The .img files are provided but I'm not sure if there is a way to manually flash them. Can I do it with ADB? I think I could package the .img up for odin but I feel like there is a reason not to do this, or the file would be available.
When I go to install recovery script, it downloads fine and says it installed. Then when I reboot its still CWM. I am able to switch between CWM and CWM touch as well, just no TWRP. I am running a Carbon ROM nightly build at the moment.
Any suggestions on how to get back to TWRP? I assume I can use odin to start over from the beginning but it seems like overkill.
Click to expand...
Click to collapse
The bootloader isnt unlocked so you cant flash via odin. Does goo manager have root privileges. I would try removing the root privilege in your app of choice, re add it then try flashing again. Theres also zips you can flash via recovery of choice. Trying to locate one now.
Edit:
Heres some lokid recoveries that are flashable via recovery.
http://forum.xda-developers.com/showthread.php?p=45452309
thecaptain0220 said:
Any suggestions on how to get back to TWRP? I assume I can use odin to start over from the beginning but it seems like overkill.
Click to expand...
Click to collapse
Post the results of running the following commands in terminal
Code:
su
cd /
ls -l /dev/block/platform/msm_sdcc.1/by-name
Then we should be able to figure out the issue
Sent from my SCH-I545 using xda app-developers app