So today I dropped my lg g2 while it was in the quick window cover or smartcover or whatever it's called and the screen got shattered literally
So there's this crack that goes just from the top of the screen to the very bottom in the middle of the phone as if the screen has been cut into two halves, and now the side of the glass responds a little bit to touch I can answer calls for example..but the left side is useless or when I press a little hard on the left side the touch responds in a crazy way :s so what does that mean ?
that I need my LCD and digitizer and gorilla glass replaced ? Or just the digitizer and gorilla glass ? Or gorilla glass only ? Since the screen responds somehow to some touches
The display has no problems in black areas or dead pixels or sth
And what is front housing ? I found it on eBay but didn't get it
About Digitizer, where is it located ? Under the LCD ??
Thanks
First of all questions go in the q&a thread and as for your phone digitizer is not working but is a very dangerous and risky job so I recommend you either buy an LCD with digitizer or take it to a repair shop
Sent from my LG-D800 using XDA Premium 4 mobile app
XxZombiePikachu said:
First of all questions go in the q&a thread and as for your phone digitizer is not working but is a very dangerous and risky job so I recommend you either buy an LCD with digitizer or take it to a repair shop
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Why is the digitizer not working r u sure ??
I am telling you I can touch the screen on the left half of the screen I can even open diaper and call someone
I think that the shattered glass somehow Press on the display making it thing that someone is touching it there at the cracks
Just a thought
Correct me if I am wrong
anonymousss said:
Why is the digitizer not working
Click to expand...
Click to collapse
Well, you did drop it...
it's because G2 has two different connectors for digitizer so one side is working and and the other is not (should be upper side and lower side)
anonymousss said:
So today I dropped my lg g2 while it was in the quick window cover or smartcover or whatever it's called and the screen got shattered literally
So there's this crack that goes just from the top of the screen to the very bottom in the middle of the phone as if the screen has been cut into two halves, and now the side of the glass responds a little bit to touch I can answer calls for example..but the left side is useless or when I press a little hard on the left side the touch responds in a crazy way :s so what does that mean ?
that I need my LCD and digitizer and gorilla glass replaced ? Or just the digitizer and gorilla glass ? Or gorilla glass only ? Since the screen responds somehow to some touches
The display has no problems in black areas or dead pixels or sth
And what is front housing ? I found it on eBay but didn't get it
About Digitizer, where is it located ? Under the LCD ??
Thanks
Click to expand...
Click to collapse
the digitizer is in between the screen and the lcd.
I would not try to split the screen/digitizer from the lcd. Even if you accomplish this you are going to have to be extremely careful not to get anything in between the new screen/digitizer and lcd when you repair it. you would also need to make sure that you create a complete seal so that no dust/lint/foriegn bodies get in between them after. It is so much easier to get one already pre-assembled (screen/digitizer/lcd)
you can pick up a new screen/digitizer/lcd off amazon for about 120-180, mine came with an install kit as well ( no adhesive but all the tools necessary to dismantle the phone).
Then youtube "LG G2 screen replacement" Its fairly easy and simple to do.
If you decide to go this route vice sending it in I would watch the video() a couple times and then follow along with it as you perform the repair yourself.
link to my thread when I repaired my phone:
http://forum.xda-developers.com/show....php?t=2660266
link to another screen repair thread:
http://forum.xda-developers.com/showthread.php?t=2671529
Savoca said:
Well, you did drop it...
Click to expand...
Click to collapse
:good: +1
anonymousss said:
So today I dropped my lg g2 while it was in the quick window cover or smartcover or whatever it's called and the screen got shattered literally
So there's this crack that goes just from the top of the screen to the very bottom in the middle of the phone as if the screen has been cut into two halves, and now the side of the glass responds a little bit to touch I can answer calls for example..but the left side is useless or when I press a little hard on the left side the touch responds in a crazy way :s so what does that mean ?
that I need my LCD and digitizer and gorilla glass replaced ? Or just the digitizer and gorilla glass ? Or gorilla glass only ? Since the screen responds somehow to some touches
The display has no problems in black areas or dead pixels or sth
And what is front housing ? I found it on eBay but didn't get it
About Digitizer, where is it located ? Under the LCD ??
Thanks
Click to expand...
Click to collapse
See the post above mine....
Savoca said:
Well, you did drop it...
Click to expand...
Click to collapse
That's not what I meant
I meant why he says digitizer is broken when I can still touch the screen and make it work....
anonymousss said:
That's not what I meant
I meant why he says digitizer is broken when I can still touch the screen and make it work....
Click to expand...
Click to collapse
Just trust you need to buy the lcd digitizer assembled. The fact that your asking if it's broken shows you probably don't have the skills necessary to simply replace one part. Its actually extremely tricky to do. I fix phones for a company but i hate replacing just onr half of the assembly.
Sent from my VS980 4G using Tapatalk
The digitizer is a part of the screen. It's the zero gap technology that LG boasts about and while it's awesome I general, it's a pain if your screen cracks. You won't be able to find a digitizer alone or a lcd alone for the g2 these come together
Sent from my LG-D802 using XDA Premium 4 mobile app
Okay so this is the back of a g2 digitizer and if yours is cracked right throughout the middle that means that somewhere around the silver/black lines it broke and the touch can't fully communicate with the cable that connects to the phone at the top/bottom
Sent from my LG-D800 using XDA Premium 4 mobile app
Related
i accidentally let my HD fell on the ground one day when i get off my car..
when i picked it up i found that there's a crack on the screen, and the phone won't turn on until i pull out the battery and put it back
initially i thought it would be the damage to the LCD screen, but seeing the boot up screen i see no damage to the LCD, instead feels like there's a protection glass between the touch surface and the LCD screen... which is broken by now
is there any way to get it repaired? i'm living in China and i bought the HD from UK...
I think the part that you are looking for is the touch screen part. Try looking at ebay for some spare parts, maybe you can try to fix it yourself at home.
I am so sorry man. I can really feel you pain.
I would advice you to contact HTC directly and explain them the problem. I am sure they would get back to you with a solution.
Good Luck.
doctorcete said:
I think the part that you are looking for is the touch screen part. Try looking at ebay for some spare parts, maybe you can try to fix it yourself at home.
Click to expand...
Click to collapse
Hmm.. I thought the touchscreen shouldn't be usable if that's the touch screen part..? But it's still usable, just the crack is ugly on such an amazing device...
I don't think with my handwork I should try this myself disassembling my HD.. It would be stupid if I break something
VizagDude said:
I am so sorry man. I can really feel you pain.
I would advice you to contact HTC directly and explain them the problem. I am sure they would get back to you with a solution.
Good Luck.
Click to expand...
Click to collapse
Yeah, I'm trying to, but I don't know which HTC Care Center is the nearest from my place.. Maybe I should try to contact HK HTC Care instead..
Million thanks anyway.
pricey but ebay has what you are looking for
http://cgi.ebay.com/HTC-TOUCH-HD-T8...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
jonajuna said:
pricey but ebay has what you are looking for
http://cgi.ebay.com/HTC-TOUCH-HD-T8...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
Hmm, thanks mate.
Anyway, I was just wondering, if that glass is just for protection for such a enormous screen (I noticed Diamond don't have that class, you can see some waves on the LCD if you press hard enough; and at the same time mine broken but touchscreen still as sensitive as ever), maybe we can just customize some tempered glass like the iPhone screen and replace the original one?
It's a shame that it's so fragile, with the phone selling such a price. I could buy an LCD TV with the same price..
Any technicians can confirm what does that glass actually exists for?
You need something like this:
http://cgi.ebay.com/HTC-HD-T8282-BL...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
maddie,
was your device protected by any kind of screen protector when the unfortunate event happened ?
Just curious !
gastko1 said:
You need something like this:
http://cgi.ebay.com/HTC-HD-T8282-BL...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
Well, thanks a lot!
Does that include the glass between the surface and the LCD screen..?
spasovxda said:
maddie,
was your device protected by any kind of screen protector when the unfortunate event happened ?
Just curious !
Click to expand...
Click to collapse
Yeah, it's with screen protector.. But I don't think there's any help with just a slice of plastic sticking on the screen..
Anyway, the problem is I dropped it while it's in the stock pouch, screen parallel with the ground... Kinda lying on the ground
I AM SOORY , i spesk very little english and I am so sorry man. I can really feel you pain.
i have same problem with the glass that between the most surface layer and the LCD screen.
what happen with you ? and where ?
glass also broker
My phone screen also cracked but it works fine (both the touch function and the screen as no LCD spillage), the only thing is the hairline cracks on the screen (it seems that there is a glass between the touch screen and the lcd screen - i sent it to service here in Greece and said they need 320 Euros to replace the screen and casing !!
I'm looking for the best alternative solution on EBAY but i'm confused.
Is this what i need?
http://cgi.ebay.com/ws/eBayISAPI.dl...2BIA%2BMRU-15032&otn=4&ps=10#ebayphotohosting
glass also broken
My phone screen also cracked but it works fine (both the touch function and the screen as no LCD spillage), the only thing is the hairline cracks on the screen (it seems that there is a glass between the touch screen and the lcd screen - i sent it to service here in Greece and said they need 320 Euros to replace the screen and casing !!
I'm looking for the best alternative solution on EBAY but i'm confused.
Is this what i need?
http://cgi.ebay.com/ws/eBayISAPI.dl...2BIA%2BMRU-15032&otn=4&ps=10#ebayphotohosting
hi
I have some scratchs on my screen and I am looking for a replacement digtizer.
I found several on ebay,
http://shop.ebay.com/i.html?_nkw=xp...+screen&_osacat=0&_trksid=p3286.c0.m270.l1313
Have anyone replaced the digitizer or know if this are original?
Thanks!
Did you remove the factory screen protector for some reason and not replace it? Or did your phone not come with a factory screen protector?
ClintonH said:
Did you remove the factory screen protector for some reason and not replace it? Or did your phone not come with a factory screen protector?
Click to expand...
Click to collapse
Hi
I removed the factory screen protector. when I got a couple of scratches I applied a new protector.
But the few scratches I have are ittitating me!!!!
Hi, I recently changed my digitizer. Put on a black one on my white phone. They are all real, I have not seen any fakes around. I also bought mine off of ebay.
--duplicate--
I wish one of these ebay listings gave a part number or model number for the digitizer... for obvious reasons.
trojjanhorse said:
Hi, I recently changed my digitizer. Put on a black one on my white phone. They are all real, I have not seen any fakes around. I also bought mine off of ebay.
Click to expand...
Click to collapse
Is this digitizer is the same part i need to change when my screen gets cracked ?
The story is my phone fell down and the screen got cracked and kinda ink appeared around the line of crack..
I was really wandering which part to change since the touch was working fine..
sent from my x10i that is banging for a 2.1 upgrade. ...
mezo9090 said:
Is this digitizer is the same part i need to change when my screen gets cracked ?
The story is my phone fell down and the screen got cracked and kinda ink appeared around the line of crack..
I was really wandering which part to change since the touch was working fine..
sent from my x10i that is banging for a 2.1 upgrade. ...
Click to expand...
Click to collapse
Hey Mezo,
The digitizer is factory glued with the top glass and is considered one piece since you can't separate the two. The LCD is separate from the digitizer. If your LCD is cracked, then your display will be distorted with lines across the screen. If your top glass is cracked, then your digitizer will still work since the digitizer is not as fragile as the top glass. So the question is, is the top glass cracked? Is the LCD display cracked as well? I know your digitizer will still be functioning but you might want to consider buying a new one as for the cracks may be unappealing and annoying.
I simply broke the top glass and I did not like the crack spanning across my screen so I got myself a new one.
If your LCD is damaged then you need to buy a new LCD which is not cheap... (over $100).
@trojjanhorse
the top layer which i touch is functional, so that means i have broken the LCD ?
i appreciate if you have a look on them i attached some pic, i hope they are clear enough since i took them with 3mp cam
thanks for the help in advance, i don't know much about mobile displays
mezo9090 said:
@trojjanhorse
the top layer which i touch is functional, so that means i have broken the LCD ?
i appreciate if you have a look on them i attached some pic, i hope they are clear enough since i took them with 3mp cam
thanks for the help in advance, i don't know much about mobile displays
Click to expand...
Click to collapse
Most likely you have broken the LCD. When dark pixels appear like that, it usually means that you've directly struck the LCD itself and damaged that area.
It was a thin line at first then some Ink started to flow and became bigger the next day.
So its the LCD?
should I fix it at the service center or i can replace it myself?
sent from my x10i that is banging for a 2.1 upgrade. ...
You can, in theory, fix it yourself but it'll be a biatch of a job. Use the X10 undressing post to find out how to actually take it to bits...
Then put the new LCD in.
only issue is finding somewhere that sells them... I don't know if they're a generic 854x480 lcd or what so...
To change LCD is very simple, but to change the digitizer is suicide. You will need to get a new LCD. I would buy one off of ebay and install it myself. I've been fixing phones for 2 years now so I had my share of experience but it may be difficult for you. The black liquid is due to the fact that LCD stands for "Liquid" Crystal Display
Good luck.
Hi guys!
I bought a Galaxy Mega 6.3 just 2 weeks ago and today I accidentally dropped it on the road.
I now have a shattered glass, the touch doesn't work all over but i can touch the status bar and with more effort touching it in just that upper area, I can make the status bar come down and read all notifications.
Now I wanted to know if the touch is working on the status bar area, is the digitizer broken? Do I need to change the digitizer with glass or changing ONLY the outer glass will work?
Very Sad bro...
I think if any of these broken ,Samsung will change both glass and the Digitizer ...
what was the fallen height and the type of Road? I am very much afraid now...
Most likely a break in the digitiser cable where it joins the screen, I'm guessing you'll need to replace both anyway if the digitiser is stuck to the screen.
Digitalizer is fused to the screen
bilalraybrig said:
Hi guys!
I bought a Galaxy Mega 6.3 just 2 weeks ago and today I accidentally dropped it on the road.
I now have a shattered glass, the touch doesn't work all over but i can touch the status bar and with more effort touching it in just that upper area, I can make the status bar come down and read all notifications.
Now I wanted to know if the touch is working on the status bar area, is the digitizer broken? Do I need to change the digitizer with glass or changing ONLY the outer glass will work?
Click to expand...
Click to collapse
=============
Very sad to hear it bro...
If you are in India and if you brought the phone after July 1st or Aug 1st (Not sure about the exact date) then Samsung is going to replace the screen for free for once only. Please take it to the service center and check about this...Samsung started this recently due to the high cases on screen damages. Hope this helps...
Pariki said:
=============
Very sad to hear it bro...
If you are in India and if you brought the phone after July 1st or Aug 1st (Not sure about the exact date) then Samsung is going to replace the screen for free for once only. Please take it to the service center and check about this...Samsung started this recently due to the high cases on screen damages. Hope this helps...
Click to expand...
Click to collapse
I got it replaced by samsung but not for free. they charged me Rs. 7610/- . the scheme which you are talking about is applicable only on Galaxy S4 not more than a month old.
soraxx said:
Digitalizer is fused to the screen
Click to expand...
Click to collapse
No its not, the digitizer and glass are not fused. I took mine apart, they are glued only around the edges. in between there is some kind of lube like oil.
micxploed said:
No its not, the digitizer and glass are not fused. I took mine apart, they are glued only around the edges. in between there is some kind of lube like oil.
Click to expand...
Click to collapse
Yeah it isn't fused to the screen. On AMOLED panels it is because the screen technology us different. On LCD the LCD and digitizer is seperate. You need to remove the layer of glass with the digitizer which is dangerous if you don't know what you are doing. On Etrade Supply the part is around $70 USD
Sent from my GT-I9200 using Tapatalk
ianneo said:
Yeah it isn't fused to the screen. On AMOLED panels it is because the screen technology us different. On LCD the LCD and digitizer is seperate. You need to remove the layer of glass with the digitizer which is dangerous if you don't know what you are doing. On Etrade Supply the part is around $70 USD
Sent from my GT-I9200 using Tapatalk
Click to expand...
Click to collapse
Ya... Trying to seperate lcd & digitizer is a cumbersome work.....
But samsung ships it as a single unit. U wont get just lcd or digitizer seperately.
Overnight over a charge, my screen went unresponsive, on wake it respond intermittently, can that be digitizer issue?
Glass only, digitizer, lcd panel, can be bought 3rd party, in 1, 1+2, or 3-in-1 combo, ranging from US$6/12/29.now online So can I separate the digitizer+glass safely from the lcd panel? (Latter is still very good, not prepared to change that to 3rd party)
But 3rd party could not work with 4.4. At least mostly... You need to be sure from vendor if purchased parts will work under KK.
trurl3 said:
But 3rd party could not work with 4.4. At least mostly... You need to be sure from vendor if purchased parts will work under KK.
Click to expand...
Click to collapse
What has hardware parts got to do with software?
I'm running. Cm11 on it.
jaiong said:
What has hardware parts got to do with software?
I'm running. Cm11 on it.
Click to expand...
Click to collapse
Probably in CM11 you will have no problems, but yes, unfortunately they are if you have stock rom...
Some people who changed screen in Mega were very surprised after actualization from 4.2 to 4.4 if changed parts were not original Samsung. Of course there are venhdors selling OEM screens working in 4.4 too, but you must be very sure about it before buing parts.
Actually I'm still asking if it's easy to separate.digitizer from lcd panel on Mega (nonAMOLED)? (digitizer replacement)
jaiong said:
Actually I'm still asking if it's easy to separate.digitizer from lcd panel on Mega (nonAMOLED)? (digitizer replacement)
Click to expand...
Click to collapse
Here you can see very detailed how to do it , unfortunately in german. Decide for yourself if it is difficult
https://www.youtube.com/watch?v=edURB0NNdDk
or here
http://youtube-downloader-mp3.com/w...uch-screen-repair-id-wVGY3xpH2qY.html?similar
trurl3 said:
Here you can see very detailed how to do it , unfortunately in german. Decide for yourself if it is difficult
https://www.youtube.com/watch?v=edURB0NNdDk
or here
http://youtube-downloader-mp3.com/w...uch-screen-repair-id-wVGY3xpH2qY.html?similar
Click to expand...
Click to collapse
Thanks my friend, possible but tough and not worth the time, considering scraping /scrubbing away the separated full face glue, and reapplying and tweaking the liquid glue to make it invisible when reassembling.
jaiong said:
Thanks my friend, possible but tough and not worth the time, considering scraping /scrubbing away the separated full face glue, and reapplying and tweaking the liquid glue to make it invisible when reassembling.
Click to expand...
Click to collapse
IMHO you are right. Better to buy complete screen and replace it without so much hassle.
hello, my Samsung A20 glass cracks up. however, i can touch all over the screen just the same and it works well. Do I need to replace the entire screen or just the outer glass?
Well I did one last week that was successful but I was practicing on one with a broken digitizer so it was no good anyway. I broke it. This one seemed more hard to separate from the lcd. I don't know why. The lcd lifted from the housing and I didnt use much heat at all. But I'll post pictures for anyone who would like to attempt this. You can see on the pic with the tool how thin the glass is and where the lcd lifted from the housing.
Sent from my SCH-I545 using xda app-developers app
Oh yea.you have to be extra careful of that flex cable connecting to the lcd which is exposed
Sent from my SCH-I545 using xda app-developers app
warriorpluto said:
Well I did one last week that was successful but I was practicing on one with a broken digitizer so it was no good anyway. I broke it. This one seemed more hard to separate from the lcd. I don't know why. The lcd lifted from the housing and I didnt use much heat at all. But I'll post pictures for anyone who would like to attempt this. You can see on the pic with the tool how thin the glass is and where the lcd lifted from the housing.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
I was looking for a thread to post this in, this may be the right place as you may have an idea, since you just installed a mega screen.
I cracked my mega screen last night, originally the phone was still working. In about half an hour the screen wasn't registering swipes, so I can't even unlock the screen. I dropped the phone in the rain so I'm not sure if it's simply the screen or if water has gotten in to the cracks?
Anyways, I am trying to make a decision on wether to sell my broken phone to Mazuma mobile and get around $120 back, or wether it's worth trying to get fixed. I'm not confident fixing phones, so ordering in the screen and attempting it is not an option. What I want to know, is what are the chances of a local repair shop being able to source a mega screen, and fix it, for a decent cost that would make getting it fixed the better option? Since you have just installed a screen I figure you at least know how much the part is
You can buy the lcd screen + digitizer which comes all pre-assembled and all you have to do it swap the whole screen + digitizer out as one unit..this way no fear of breaking anything..i see one on ebay for $158.00 US for the mega 6.3 i9200..but i think it will also work on the other 6.3 mega models..as they must all be the same that way...but i am not 100% sure on that. :good:
leetrevor81 said:
I was looking for a thread to post this in, this may be the right place as you may have an idea, since you just installed a mega screen.
I cracked my mega screen last night, originally the phone was still working. In about half an hour the screen wasn't registering swipes, so I can't even unlock the screen. I dropped the phone in the rain so I'm not sure if it's simply the screen or if water has gotten in to the cracks?
Anyways, I am trying to make a decision on wether to sell my broken phone to Mazuma mobile and get around $120 back, or wether it's worth trying to get fixed. I'm not confident fixing phones, so ordering in the screen and attempting it is not an option. What I want to know, is what are the chances of a local repair shop being able to source a mega screen, and fix it, for a decent cost that would make getting it fixed the better option? Since you have just installed a screen I figure you at least know how much the part is
Click to expand...
Click to collapse
If you get the lcd and digitizer together, you can fix yourself and it's easy just as star master says. If you have a shop nearby they can replace just the glass
Sent from my SCH-I545 using xda app-developers app
leetrevor81 said:
I was looking for a thread to post this in, this may be the right place as you may have an idea, since you just installed a mega screen.
I cracked my mega screen last night, originally the phone was still working. In about half an hour the screen wasn't registering swipes, so I can't even unlock the screen. I dropped the phone in the rain so I'm not sure if it's simply the screen or if water has gotten in to the cracks?
Anyways, I am trying to make a decision on wether to sell my broken phone to Mazuma mobile and get around $120 back, or wether it's worth trying to get fixed. I'm not confident fixing phones, so ordering in the screen and attempting it is not an option. What I want to know, is what are the chances of a local repair shop being able to source a mega screen, and fix it, for a decent cost that would make getting it fixed the better option? Since you have just installed a screen I figure you at least know how much the part is
Click to expand...
Click to collapse
And don't sell. $120 is a freaking rip off
Sent from my SCH-I545 using xda app-developers app
warriorpluto said:
And don't sell. $120 is a freaking rip off
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
How much do you think it would go for on ebay? (or somewhere else) I didn't think a damaged phone would be worth selling?
That phone is still with over $200 as is.just the good motherboard alone. Especially if it had a clean imei number..then counting other parts of the phone too
Sent from my SCH-I545 using xda app-developers app
Good tutorial how to fix it
There is some kind of double side transparent adhesive between LCD and digitizer. So good luck
Opened front glass
Hi, I opened front glass of Mega 5.8 to clean the dust inside it. When I put it back, the touch is not working. Earlier it was working perfectly, I did not remove any cables. Also that I cleaned it with dry cloth while the phone was on.
What may be the issue?
warriorpluto said:
Oh yea.you have to be extra careful of that flex cable connecting to the lcd which is exposed
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
How does it separate?
warriorpluto said:
Well I did one last week that was successful but I was practicing on one with a broken digitizer so it was no good anyway. I broke it. This one seemed more hard to separate from the lcd. I don't know why. The lcd lifted from the housing and I didnt use much heat at all. But I'll post pictures for anyone who would like to attempt this. You can see on the pic with the tool how thin the glass is and where the lcd lifted from the housing.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Hi,
I've never worked on one of these before but I have repaired many GS3, GS4, Note 2 with no problems. You successfully repaired one so my question is, is the optical adhesive like the GS3 where it rubs off with your finger? I've noticed a difference in GS3 & GS4 adhesive the GS4 is more difficult to clean off digitizer.
That yellow flex cable in your pic looks like a Digitizer flex. The layers are LCD (bottom) / Digitizer (sits on top of LCD so center) / Glass (top which is what our finger touches).
I have a Mega coming in tomorrow and the customer bought just the glass online. I'll see if I can separate. If you have any questions let me know I have repaired many a phones.
Did you get it?
ReyesARG said:
Hi,
I've never worked on one of these before but I have repaired many GS3, GS4, Note 2 with no problems. You successfully repaired one so my question is, is the optical adhesive like the GS3 where it rubs off with your finger? I've noticed a difference in GS3 & GS4 adhesive the GS4 is more difficult to clean off digitizer.
That yellow flex cable in your pic looks like a Digitizer flex. The layers are LCD (bottom) / Digitizer (sits on top of LCD so center) / Glass (top which is what our finger touches).
I have a Mega coming in tomorrow and the customer bought just the glass online. I'll see if I can separate. If you have any questions let me know I have repaired many a phones.
Click to expand...
Click to collapse
I wonder how was it going with your repair?
http://www.witrigs.com/samsung-galaxy-mega-replacement-parts
Adhesive is a problem
letus1 said:
I wonder how was it going with your repair?
Click to expand...
Click to collapse
Hey,
No good. The LCD was lifting off the frame which is a guarantee to break on such a large device. Also the adhesive is not the same as the GS3, it doesn't separate as easy. I stopped after I noticed the optical adhesive was not the same so do not attempt to "Lift Separate"
The best way to remove this digitizer is with a hot plate & (.10mm) molybdenum wire and slowly drag the wire between the LCD & Digi while face down on hotplate.
ReyesARG said:
Hey,
No good. The LCD was lifting off the frame which is a guarantee to break on such a large device. Also the adhesive is not the same as the GS3, it doesn't separate as easy. I stopped after I noticed the optical adhesive was not the same so do not attempt to "Lift Separate"
The best way to remove this digitizer is with a hot plate & (.10mm) molybdenum wire and slowly drag the wire between the LCD & Digi while face down on hotplate.
Click to expand...
Click to collapse
If i separated the digitizer and the glass ftom the lcd, than can i bound the new one with LOCA or will that damage the LCD?
ReyesARG said:
Hey,
No good. The LCD was lifting off the frame which is a guarantee to break on such a large device. Also the adhesive is not the same as the GS3, it doesn't separate as easy. I stopped after I noticed the optical adhesive was not the same so do not attempt to "Lift Separate"
The best way to remove this digitizer is with a hot plate & (.10mm) molybdenum wire and slowly drag the wire between the LCD & Digi while face down on hotplate.
Click to expand...
Click to collapse
I knew that was the only way to do it, with hot plate and fishing pole string. I'm sure it's a slow process. I'll have to invest in a good hot plate.
Sent from my SM-N900V using xda app-developers app
No huge investment needed, I use a standard electric pancake griddle which can be bought for around $20. Good, even heat. I've never tried the fishing line method but a pair of business cards does the job very well. I get it started with a dull razor blade in the corner and as soon as I see the glass separating, I slide a business card in behind it. Do the same for the other side. On these big screens, slide the cards down a bit, lay it down on heat, repeat. The trick to not busting the LCD is to keep the heat on it and take your time.
My temperature is set to 200 farenheit. Not sure off hand what that converts to in celsius. Ideally, you don't want the surface to pass 120 celsius. If in doubt, start low and increase temp slowly until the glue softens enough.
The glue we're taking about is LOCA[liquid optically clear adhesive] and is UV activated. It can be bought online pretty cheap. If you're going to replace the glass, go ahead and use the LOCA when putting the new glass on. I've seen sensitivity issues on glass that doesn't have the glue between it and the LCD. If you use the glue be sure to remove EVERYTHING from the frame including cameras, speakers, buttons and mics as it can get messy and go pretty much everywhere. To activate the glue you can literally take it outside on a sunny day and it will cure fairly quickly, about 5 mins or so. To remove it from unwanted areas just use a toothpick, toothbrush, and some rubbing alcohol. I've done it dozens of times this way and it always comes out looking factory fresh
VirtueToVice said:
No huge investment needed, I use a standard electric pancake griddle which can be bought for around $20. Good, even heat. I've never tried the fishing line method but a pair of business cards does the job very well. I get it started with a dull razor blade in the corner and as soon as I see the glass separating, I slide a business card in behind it. Do the same for the other side. On these big screens, slide the cards down a bit, lay it down on heat, repeat. The trick to not busting the LCD is to keep the heat on it and take your time.
My temperature is set to 200 farenheit. Not sure off hand what that converts to in celsius. Ideally, you don't want the surface to pass 120 celsius. If in doubt, start low and increase temp slowly until the glue softens enough.
The glue we're taking about is LOCA[liquid optically clear adhesive] and is UV activated. It can be bought online pretty cheap. If you're going to replace the glass, go ahead and use the LOCA when putting the new glass on. I've seen sensitivity issues on glass that doesn't have the glue between it and the LCD. If you use the glue be sure to remove EVERYTHING from the frame including cameras, speakers, buttons and mics as it can get messy and go pretty much everywhere. To activate the glue you can literally take it outside on a sunny day and it will cure fairly quickly, about 5 mins or so. To remove it from unwanted areas just use a toothpick, toothbrush, and some rubbing alcohol. I've done it dozens of times this way and it always comes out looking factory fresh
Click to expand...
Click to collapse
What kind of griddle? This is the one without the edges right?
Sent from my SM-N900V using xda app-developers app
starmaster10 said:
You can buy the lcd screen + digitizer which comes all pre-assembled and all you have to do it swap the whole screen + digitizer out as one unit..this way no fear of breaking anything..i see one on ebay for $158.00 US for the mega 6.3 i9200..but i think it will also work on the other 6.3 mega models..as they must all be the same that way...but i am not 100% sure on that. :good:
Click to expand...
Click to collapse
I like this..
fixxforyou said:
May i ask how much for this glass?
Click to expand...
Click to collapse
Who give your answer ? Mention it..
So I dropped my phone and its screen broke
The upper glass is not broken but the glass inside it is.
The phone turns on but nothing is displayed on the screen, it stays black
The soft keys do light up and work
Most probably its the LCD screen but I still want to confirm if I have to change the digitizer too
Thanks a lot
http://rewatech.en.alibaba.com/prod...y_Touchscreen_for_Samsung_Galaxy_S2_i777.html
I'm looking forward to buy this
But want your help
The upper glass is not broken at all
Digitizer ?
http://rewatech.en.alibaba.com/prod...y_Touchscreen_for_Samsung_Galaxy_S2_i777.html
I'm looking forward to buy this
But want your help
The upper glass is not broken at all
Rushaan™ said:
http://rewatech.en.alibaba.com/prod...y_Touchscreen_for_Samsung_Galaxy_S2_i777.html
I'm looking forward to buy this
But want your help
The upper glass is not broken at all
Click to expand...
Click to collapse
read the link you sent. they only sell in bulk and not to end users. thats all.
Rushaan™ said:
So I dropped my phone and its screen broke
The upper glass is not broken but the glass inside it is.
The phone turns on but nothing is displayed on the screen, it stays black
The soft keys do light up and work
Most probably its the LCD screen but I still want to confirm if I have to change the digitizer too
Thanks a lot
Click to expand...
Click to collapse
Contact mobiletechvideos.com (call or email) and they should be able to give the answer. They r experts at cell phone repair, etc. and well respected around here by many.
Sent from my SAMSUNG-SGH-I747 using Tapatalk