Unlock BL-Root .136-Relock BL - Sony Xperia Z Ultra

Hey, I just followed the following steps and have working Bravia engine (Me thinks ) with root on a .136 C6833.
Backup TA.
unlock bootloader
1) full flash .136 ftf using flashtool. let the phone boot up and do all the initial setup.
2) Flash jackie's kernel.
3) flash update_SU 1.93.zip
4) using flashtool, flash kernel only (.136)
5) restore TA and relock bootloader
voila rooted .136 with a locked BL and working Bravia Engine
Credits to jackie099 for his kernel and DevShaft for BackupTA utility.
I didnt do any research so no credits to me :angel:
i just tried something on my phone and it worked so am posting it!!
Mods if am offending someone or violating any rules, pls notify and delete the thread!

If one hasn't already ready backed up their TA then root is required for the 1st step.

muntaha_v3 said:
phone boot up and do all the initial setup.
2) Flash jackie's kernel.
4) using flashtool, flash kernel only (.136)
Click to expand...
Click to collapse
If you spread any instructions, then I ask to give references to other sources.
For example jackie's kernel. Where I shall look for it?

using flashtool, flash kernel only (.136)
NO !
If you gonna flash just a kernel your Update center will pop up notification about new system .136 system update.
So to remove that you have a choice.
-You need to remove Update center.apk.
or
You need to flash like this (everything besides "system" and "wipe app data")

This is XDA, if you cant search...
NO !
If you gonna flash just a kernel your Update center will pop up notification about new system .136 system update.
Click to expand...
Click to collapse
Where he says to flash just the kernel you already have a full .136 so i doubt updatecentre will care.
To OP congrats on finding this out (although it is semi common knowledge that it will work like that)
Just one thing, if you unlock the BL again it will cause another data format, but you can make a backup of the TA in its unlocked bootloader state and use that to unlock and thus not format data. Just make sure you have them well named.

Quick question..
To get root: I ota to 136, unlock bl, flash Jackie ric kill kernel/recovery, flash su. I wouldn't mind trying this but how is "partial root" problem avoided when using the stock non ric kill kernel that is required to relock bl?
Sent from my C6833 using Tapatalk

@muntaha_v3 or @blueether ~ same question as buzman; don't you need non standard kernel to keep full root (system rw).
Sent from my C6833 using Tapatalk

DorianNakamo said:
@muntaha_v3 or @blueether ~ same question as buzman; don't you need non standard kernel to keep full root (system rw).
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
True, but many people only need read access to /system. May be that is the case here?
And you could always flash a unlocked backup and hot-boot a modded kernel for the odd occasion that you need full root?

Or, as I thought just after posting, a "system r/w access" start up script prior to stock kernel flash and you could also keep full root after stock kernel flash.
Sent from my C6833 using Tapatalk

Sorry guys, was busy with some official Training programs so didnt have time to come online.
1) Yes you have only read access to system.
2) Restoring TA doesn't cause full wipe.
3) this i tried for some of those friends of mine who own Xperia Z1 and Z but dont exploit their full potential because they are scared they'll lose warranty. Convinced one of them, the others are still in line though. Shame on them

Not meaning to get pedantic, maybe the thread should be renamed to "unlock bl, su, relock bl" as root implies rw access to root lol (unless rw script for system is run during boot)
Sent from my C6833 using Tapatalk

Related

[NOOB-GUIDE][ALL IN ONE GUIDE][NEO V]Xperia Neo V PREPARING PHONE AND PC FOR ANY ROM

Since i see many people having problems with installing cm9 on neo v, i've decided to help them
If you're a noob, have a look at this http://forum.xda-developers.com/showthread.php?t=1409269
If you're not a noob, proceed with the steps confirming that you have performed the steps
PLEASE FOLLOW THE STEPS CAREFULLY
THE REFERENCE LINKS GIVEN ARE ONLY MEANT FOR READING AND INFORMATION PLEASE DONT FOLLOW THEIR INSTRUCTIONS TO DO SOMETHING TO YOUR PHONE.
Step 1: PREPARE YOUR COMPUTER
http://www.youtube.com/watch?v=Khrxo0-NieM
it will explain a lot please watch it, download links are below
thanks for the video....
Downloads:
1)Android SDK- http://developer.android.com/sdk/index.html
2)ADB Drivers- http://www.mediafire.com/?6u1zl54w3jnvvax (just open the .cat files(x86/x64) and the drivers will be installed )
3)After watching the video, download (http://www.mediafire.com/?4qoenin9cjn7s7i) fastboot and place(copy paste) the 3 files in your android sdk directory>platform-tools(for me its C:\androidSDK\platform-tools)
if platform tools is not present, please follow the video again you have to instll "tools" package in SDK.
4)Flashtool- http://androxyde.github.com/ -go to the installation tab and download it (130 mb)
Step 2: ROOT THE PHONE
If you have no idea about rooting, have a look at this http://droidlessons.com/what-is-rooting-on-android-the-advantages-and-disadvantages/
How to know that you are rooted-lookout for "superuser" app in app drawer, if found, you have rooted your phone.
if you are on official ICS 4.0.3 ,
1)[ requirements ]
a)stock ICS firmware 4.1.A.0.562 for your device
b)ADB drivers installed (if u are not sure, then install http://icxperia.com/doomlord/Flashtool-drivers.exe)
c)the tool http://bit.ly/ert_xperia_2011_ics_1
2)[ READ THE FOLLOWING CAREFULLY! ]
This script will:
root ur device using "andorid emulator" trick
install Busybox (1.18.4)
install SU files (ICS specific)
do some checks for free space, tmp directory (will remove Google Maps if required)
Before u begin:
make sure u have installed adb drivers for ur device
enable "USB DEBUGGING" - from (Menu\Settings\Developer Options\Development)
enable "UNKNOWN SOURCES" - from (Menu\Settings\Security)
[OPTIONAL] increase screen timeout to 10 minutes
connect USB cable to PHONE and then connect to PC
skip "PC Companion Software" prompt on device
3)[ WARNING ]
make sure that no other adb server is running in background (e.g.: Flashtool, PCC, SEUS) and disable any antivirus
4)[ how to install? ]
Connect your phone in MSC (mass storage mode) mode(SD card can be viewed on PC)
make sure that you are on stock ICS firmware 4.0.3
download the files
extract ALL the files in the zip
now just double click on "runme.bat"
sit back read the on screen instructions
the device will reboot a couple of times
when the script finishes it will say "ALL DONE"
enjoy!
If you're on Official ICS 4.0.4 ,
1)Make sure that you have flashtool installed and that you're on official ICS 4.0.4
2)You'll have to flash baseband of 4.0.3
a)Download the 4.0.3 baseband - http://www.mediafire.com/?gwe739kn5mcx56t and place the .ftf file in C:\Flashtool\firmwares
b)connect phone inMSC (mass storage mode) mode
c)open flashtool and wait for a minute
d)on top left, click the lightning icon
e)flash mode>ok
f)select MT11i(devices), 4.1.A.0.562 (version)
g)make sure that wipe cache and app log is unchecked,dont exclude anything.
h)press ok and follow the steps
i)phone will boot once flashed(may take longer to boot, dont panic)
j)voilla!! now you're on 4.0.3
3)Now scroll up and follow the same steps for 4.0.3
4)runme.bat will root the phone
5)Enjoy the rooted phone!!!!
My thanks to doomlord and madfysh
IMPORTANT !!!!!!
ONCE ROOTED,
Download https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup&hl=en and backup all your apps(on SD card)
Step 3(next step) of this post will reset(factory reset) your phone.
BACKUP ALL YOUR CONTACTS AND CALENDER ON GOOGLE
BACKUP ALL YOUR MESSAGES AND IMPORTANT STUFF !!
MAKE A BACKUP OF YOUR SD CARD ON PC FOR SAFETY (THIS WILL BE DONE AFTER ALL BACKUPS ARE DONE I.E. LAST BACKUP)
Step 3: UNLOCK BOOTLOADER
If you have no idea about this, read this
Why exactly is this a big deal? For the general population, this doesn’t matter. However, for the modding community, locked bootloaders are simply a pain. When the bootloader is locked, certain portions of the device are unable to be customized such as recoveries or kernels. A lot of the time, when rooting a device, the first step requires the bootloader to be unlocked or bypassed. So, depending on the device in question and the will of the developer, creative Android hacking has allowed some devices with locked bootloaders to run custom ROMs. Generally, these devices aren’t as stable as they could be if the device was able to be completely customized from the ground up.
1) http://unlockbootloader.sonymobile.com/ and follow the steps carefully ( skip step 13, we've already done that )
IF YOU GET STUCK ON STEP 14,DO THIS
to navigate to android SDK folder, use this command(without quotes)
"cd location_of_your_android_SDK\platform-tools"
for me, it was - "C:\androidSDK\platform-tools"
2)If you followed the rules, you will have an unlocked bootloader
3)Yipeeee !!!
4)Dont worry about your apps, they're still on your SD card
5)Restore only the apps which are very important and you cant live without them for a day..
Step 4: INSTALLING CWM(CLOCK WORK MOD / RECOVERY)
if you dont know what cwm is, just read but dont follow the steps to install it
http://www.addictivetips.com/mobile...-and-how-to-use-it-on-android-complete-guide/
1) http://www.mediafire.com/?73xv18tht0e8zt4 download cwm
2)Connect your phone in MSC (mass storage mode) mode and wait until SD card available to PC
3)increase your display time out to 2 minutes
4)Enable USB debugging and allow 3rd party/unknown sources
5)open the downloaded folder(extract first)
6)Run install-cwm1.cmd
7)sit back and enjoy!!!
8)once finished, you'll have cwm installed!!!!
9)to check if you have cwm, turn off phone
10)turn on and when sony logo appears, repeatedly press vol down button until you reach a blue colored menu, if successful, cwm is installed properly!! if not, please comment or reinstall it.
11)navigation in cwm-
go up-vol up
go down-vol down
select option-home button
previous menu-back button
thanks siddharthsure93
Step 5: TAKING A NANDROID BACKUP
if you have no idea about this, read this
http://forum.cyanogenmod.com/topic/38468-nandroid-backup-what-is-it-and-did-i-need-it/
make sure that your sd card has at least 1gb free space and you have 50% battery charge
1)Hoping that you have cwm installed, turn off phone
2)Enter cwm by repeatedly press vol down button when sony logo appears
3)go to "backup and restore"
4)select "backup"
5)wait for 10-15 minutes till your phone is backuped
6)now you have a copy of your current phone and rom memory
we do this to restore phone if something goes wrong
NOW YOU HAVE PREPARED YOUR PHONE TO GET CM9 OR ANY FU*KIN ROM !!! :good::good:
IF I GO WRONG SOMEWHERE, PLEASE CORRECT ME WE ALL LEARN FROM OUR MISTAKES.
PLEASE PRESS THE THANKS BUTTON IF I HELPED YOU
http://forum.xda-developers.com/showthread.php?p=29453825#post29453825
continue to this to install cm9 for neo v
the_neo_v_guy said:
Look people what i found !!!!!!
ROOTING is now super easy !!!
http://unlockroot.com/
This software can root any android device!!!
More than 500 devices supported !!!
so no need of flashing kernel !!!!!!
Click to expand...
Click to collapse
..
Support the Android 2.1,2.2 and 2.3
Click to expand...
Click to collapse
Another thread by you..
This makes me more sad...
geekynoob said:
Another thread by you..
This makes me more sad...
Click to expand...
Click to collapse
I'm sorry for that because i had no idea of sections at that time
but now everything's allright.
sorry for the inconvenience :/
the_neo_v_guy said:
I'm sorry for that because i had no idea of sections at that time
but now everything's allright.
sorry for the inconvenience :/
Click to expand...
Click to collapse
No sorry bro.. ur a 14yr old guy..just read the Forums..and the steps uv mentioned..there was no need for these threads..tonnnes of people using cm9 and other roms..But i hope its useful for someone..Pls take notice and b careful from now on..
Sorry if i was a bit rude..this work of mine is getting up into my head...
geekynoob said:
No sorry bro.. ur a 14yr old guy..just read the Forums..and the steps uv mentioned..there was no need for these threads..tonnnes of people using cm9 and other roms..But i hope its useful for someone..Pls take notice and b careful from now on..
Sorry if i was a bit rude..this work of mine is getting up into my head...
Click to expand...
Click to collapse
Yea, I may have helped some noobs, just made the steps clear because 3 months ago when i was a total noob at android and xda, i could only find android terms but not any thread that gave clear instructions, i had to google around for weeks until i could understand what everything was
Anyways, i do understand your mood, but what work are you on?
I just find a way to simple unlock any phone!
just visit http://www.fastgsm.com/en
For neo/v visit
http://www.fastgsm.com/en/page/how-...a-x8-x10-mini-pro-e15-e10-u20-so-01b-aspen-m1
I have a noob question
Im with a neo v with A.0.62 firmware
Which cannot be rooted
But i have already unlocked bootloader
what can I do now?
If i directly flash in JB Kernel and rom, will I be able to have root permissions? Do i even need to care about my .62 firmware if i want to go into CM10?
What should i do? Thanks!
Sent from my SHV-E120L using xda app-developers app
wilfacts said:
I have a noob question
Im with a neo v with A.0.62 firmware
Which cannot be rooted
But i have already unlocked bootloader
what can I do now?
If i directly flash in JB Kernel and rom, will I be able to have root permissions? Do i even need to care about my .62 firmware if i want to go into CM10?
What should i do? Thanks!
Sent from my SHV-E120L using xda app-developers app
Click to expand...
Click to collapse
You will need to root your phone first. Installing a custom ROM won't automatically give you root acces. In fact, I don't think you will be able to install a custom ROM without ClockWork Mod Recovery which needs root access first. Follow Sony's own rooting guide here: http://talk.sonymobile.com/thread/41119?start=0&tstart=0. Then install X-Parts from the Play Store to get CWM.
Once you have CWM you can install any appropriate custom ROM you like.
Oh is that gonna be painful
Iv unlocked bootloaded with .62 firmware
So i cant get to official ics and stucked with the .62, flashing an older firmware for the root is risky? After that i have to go back to .62 again?
so confused
Sent from my SHV-E120L using xda app-developers app
AW: [NOOB-GUIDE][ALL IN ONE GUIDE][NEO V]Xperia Neo V PREPARING PHONE AND PC FOR ANY
wilfacts said:
Oh is that gonna be painful
Iv unlocked bootloaded with .62 firmware
So i cant get to official ics and stucked with the .62, flashing an older firmware for the root is risky? After that i have to go back to .62 again?
so confused
Sent from my SHV-E120L using xda app-developers app
Click to expand...
Click to collapse
Use flash tool and an ftf file to update to ICS. You can go with 0.587 version for example.
After update as you are on unlocked bootloader you should flash a custom ICS kernel like suave, night elf or any other ICS compatible. This will give you root and cwm.
Look at the stickys. You will find all you need.
Gesendet von meinem Xperia Neo V mit Tapatalk 2
wilfacts said:
Oh is that gonna be painful
Iv unlocked bootloaded with .62 firmware
So i cant get to official ics and stucked with the .62, flashing an older firmware for the root is risky? After that i have to go back to .62 again?
so confused
Sent from my SHV-E120L using xda app-developers app
Click to expand...
Click to collapse
You can always relock the bootloader (don't know what method you used to unlock, so can't advise on how to relock - I only know how if unlocking was done through Sony). Update the firnware to stock Sony ICS using Sony's PC Companion. Then root it using Sony's rooting guide. After rooting you can unlock the bootloader again. Install X-Parts and CWM. Then try out the custom ROMs+kernels to your heart's content.
neo668 said:
I only know how if unlocking was done through Sony
Click to expand...
Click to collapse
Could you share how? I've heard if its officially unlocked, you cannot lock it again.
BlitzBerg said:
Could you share how? I've heard if its officially unlocked, you cannot lock it again.
Click to expand...
Click to collapse
On the other hand,unlocking via official method gives you an easy option to Relock bl via flashtool!
There's a thread by Blagus on how to do that!
Btw even Relocking via setool is an option for unofficially unlocked bl users!
So there's always an option!
Sent from my MT11i using xda premium
If this is what you're talking about, I've read it. But will it allow me to use the PC Companion and receive updates(Although I hardly feel there's going to be more than 1 update)/ Go back to official Sony ROM?
BlitzBerg said:
If this is what you're talking about, I've read it. But will it allow me to use the PC Companion and receive updates(Although I hardly feel there's going to be more than 1 update)/ Go back to official Sony ROM?
Click to expand...
Click to collapse
Yes. That's the tutorial I'm talking about. I only mentioned what I did because I've done it before. After relocking use PC Companion to update your phone. Or the Sony phone repair program. I don't remember which. If you try both (like I did) one (or both) of them will work. But still you are out of warranty. You know that, don't you?
---------- Post added at 08:20 AM ---------- Previous post was at 07:54 AM ----------
BlitzBerg said:
Could you share how? I've heard if its officially unlocked, you cannot lock it again.
Click to expand...
Click to collapse
http://unlockbootloader.sonymobile.com/
neo668 said:
Yes. That's the tutorial I'm talking about. I only mentioned what I did because I've done it before. After relocking use PC Companion to update your phone. Or the Sony phone repair program. I don't remember which. If you try both (like I did) one (or both) of them will work. But still you are out of warranty. You know that, don't you?
Click to expand...
Click to collapse
Basically its all about DRM loss. What do I exactly lose? Only trackid? I suppose the newer versions run on unlocked bootloaders as well.
BlitzBerg said:
Basically its all about DRM loss. What do I exactly lose? Only trackid? I suppose the newer versions run on unlocked bootloaders as well.
Click to expand...
Click to collapse
I think you are right. It's basically about losing DRM. I don't know what it is and of what use it is. All I know is I've never missed it. If you are into trying out custom ROMs then unlocking the bootloader is a must because certain custom ROMs need custom kernels. To install custom kernels you must have an unlocked bootloader.

are we safe with rooted roms

I can't recall where I saw on these forums but....
The Xperia Ultra rom exploits all seem to use vroot. However vroot had been found ti be sending IMEI numbers back to China. Nice
But given that hamdogg. Et.Al have used vroot in ROMS they have released, who feels worried?
Is there another root exploit you are using?
vroot is not working any more.
avetny said:
vroot is not working any more.
Click to expand...
Click to collapse
Not quite what I was asking
keratos said:
Not quite what I was asking
Click to expand...
Click to collapse
You are safe with a custom ROM. They don't use any tool... don't need to.
- With a rooted ROM, it flashes the superuser or superSU app, and applies the appropriate binaries and permissions directly to the ROM system.
But... to get a recovery flashed onto your system, you'll need to use vROOT or a similar tool, as it will need root access to apply the recovery script, and flash recovery. So.. you must have already used such a tool to originally root your device...
Two Important Points here:
- The app/s only "MAY" have your IMEI numbers stored. I say may, because all we currently know is that the IMEI numbers were read, we don't know for sure if they have been stored anywhere.
- If the app/s continues to send information [we currently don't know this yet] then it would be better to have a custom ROM. As it will clear your device of all app data and have ROOT access. This is only if you want to have a rooted device.
Hope that clears things.
hamdogg said:
You are safe with a custom ROM. They don't use any tool... don't need to.
- With a rooted ROM, it flashes the superuser or superSU app, and applies the appropriate binaries and permissions directly to the ROM system.
But... to get a recovery flashed onto your system, you'll need to use vROOT or a similar tool, as it will need root access to apply the recovery script, and flash recovery. So.. you must have already used such a tool to originally root your device...
Two Important Points here:
- The app/s only "MAY" have your IMEI numbers stored. I say may, because all we currently know is that the IMEI numbers were read, we don't know for sure if they have been stored anywhere.
- If the app/s continues to send information [we currently don't know this yet] then it would be better to have a custom ROM. As it will clear your device of all app data and have ROOT access. This is only if you want to have a rooted device.
Hope that clears things.
Click to expand...
Click to collapse
You don't need root access to flash a custom recovery. You can just flash from fastboot. You can use the original recovery found here. http://forum.xda-developers.com/showthread.php?t=2426736
You need an unlocked bootloader though. Also you need to remember to flash your normal kernel back afterwards, although that will be done automatically if you flash a custom rom from recovery,
baileyjr said:
You don't need root access to flash a custom recovery. You can just flash from fastboot. You can use the original recovery found here. http://forum.xda-developers.com/showthread.php?t=2426736
You need an unlocked bootloader though. Also you need to remember to flash your normal kernel back afterwards, although that will be done automatically if you flash a custom rom from recovery,
Click to expand...
Click to collapse
Urm... You need to be rooted to unlock boot loader don't you?
Sent from my C6833 using XDA Premium 4 mobile app
SpyderTracks said:
Urm... You need to be rooted to unlock boot loader don't you?
Sent from my C6833 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I want to say no?
LordManhattan said:
I want to say no?
Click to expand...
Click to collapse
****, I'm getting everything wrong at the moment, my brains gone weird.
Sent from my C6833 using XDA Premium 4 mobile app
SpyderTracks said:
Urm... You need to be rooted to unlock boot loader don't you?
Sent from my C6833 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No, but you do need to be rooted to backup your TA Partition.
Thats the trade off. If you unlock without first having root you can't restore TA and the DRM at a later date.
I rooted with Vroot and backed up mine, but I would have unlocked the bootloader regardless if I had too. Not missed any off the DRM tools at all.

[ROOT][Locked BL][STOCK] FULL Root for 4.3 (14.2.A.0.290) C6833 and C6802

Thanks @[NUT] for finding the way of rooting 4.3 with locked BL. Since nobody makes one for Z Ultra, I will do it.
This is a flashable ROM extracted from stock 14.2.A.0.290 without ANY modification.
The only 2 things added are FULL ROOT and XZDualRecovery.
This method is copied and modified from @[NUT] 's Z1 ROM
Requirements:
Flashtool 0.9.13 by @Androxyde
XZDualRecovery 2.7.71 BETA or newer.
Current rooted FW version: 14.1.B.1.532 OR 14.1.B.2.257 (rooted).
note: 257 is not tested on Z Ultra yet.
In the following guide I suggest you use an external SDCard but that's just good practice, you can use your internal storage or even an USB OTG storage device in TWRP if you like to install, that's no problem!... If you are modding and the likes, best is to have an external sdcard, just for safeties sake.
C6802: How to update to 14.2.A.0.290:
This should work for C6833, too. But you will lose 4G.
WARNING:
As the 'update' part of this ROM package does not work yet:
THIS GUIDE WILL DESTROY ALL USERDATA!
For C6802: Download C6802_14.2.A.0.290.jackie099.flashable.zip (C6833_14.2.A.0.290.jackie099.flashable.zip if u have C6803)and C6802_14.2.A.0.290_Stripped.ftf, save them somewhere you remember;
Put 'C6802_14.2.A.0.290.jackie099.flashable.zip' on (the external) SDcard1;
Put 'C6802_14.2.A.0.290_Stripped.ftf' inside the Flashtool/firmwares folder;
Create a backup of your phone in CWM or TWRP and don't forget to backup the contents of 'SDCard0';
To prevent bootloops:
Flash XL39h-C6802_4.2.2-14.1.B.1.532.ftf firmware, please use the newest flashtool, or brick.
root it with Vroot, and install Supersu to replace vroot's permission manager.
Flash XZDualRecovery 2.7.71 (from PC)
In TWRP -> Wipe -> advanced Wipe Tick/Check:
Dalvik-Cache
System
Cache
Data
Internal Storage
Swipe to Right to do the factory reset
After that Click Format Data -> type yes
Flash 'C6802_14.2.A.0.290.jackie099.flashable.zip' or 'C6833_14.2.A.0.290.jackie099.flashable.zip' in TWRP
NOTE: do not reboot but go back to the main menu, then go to reboot->power off;
Flash everything in 'C6802_14.2.A.0.290_Stripped.ftf';
Now reboot to system.
Check Supersu, and u are rooted!
Hit Thanks or donate me if you think my work is useful for you!
Thank you for this! Much appreciated!
Just to let you know - both of your link (C6802_14.2.A.0.290_Stripped.ftf,) points to the wrong file.
I have been using NUT's 4.3 root guide for other Z-devices, but when trying with my Z Ultra it wouldn't work. I tried going from a rooted generic .532 to generic .290 created according to NUT's guide. I had success on Tablet Z and Z1 but not Z Ultra. I have a C6833.
alphaandomega said:
Thank you for this! Much appreciated!
Just to let you know - both of your link (C6802_14.2.A.0.290_Stripped.ftf,) points to the wrong file.
Click to expand...
Click to collapse
Thank You! It's fixed now.
dape16 said:
I have been using NUT's 4.3 root guide for other Z-devices, but when trying with my Z Ultra it wouldn't work. I tried going from a rooted generic .532 to generic .290 created according to NUT's guide. I had success on Tablet Z and Z1 but not Z Ultra. I have a C6833.
Click to expand...
Click to collapse
If u dont mind losing LTE, u can use this one. Maybe I can make one for 6833 later.
jackie099 said:
If u dont mind losing LTE, u can use this one. Maybe I can make one for 6833 later.
Click to expand...
Click to collapse
Thank you, but I unlocked my bootloader so I am okay now.
If I have time this weekend I can try to make the files for C6833 and share them here.
Good work, but can you remove vRoot from the post and use Kingo or Bin4ary's root tools as vRoot may be harvesting imei no's
jackie099 said:
If u dont mind losing LTE, u can use this one. Maybe I can make one for 6833 later.
Click to expand...
Click to collapse
Hi million thanks for your incredible work. I have a C6806 version.... Dyou know if the C6833 version will work for me if it is finally released?
I cannot be leave there is definitely a solution for our locked bootloader telephones
Many thanks nin advance
Thank you for this! Much appreciated!
jackie099 said:
If u dont mind losing LTE, u can use this one.
Maybe I can make one for 6833 later.
Click to expand...
Click to collapse
+1000!!!!
After looking at XZDualRecovery 2.7.71 I think this will work
DONT TRY THIS AT HOME KIDS
1/ flash either my BE Rom or DoggRom
2/ DON'T reboot yet, go to advanced/ power off (CWM) [or back to the main menu, then go to reboot->power off (TWRP)]
3/ start flash tool / select Flash / Flashmode
4/ select .290 ftf
5/ deselect wipes (done on install or Rom), exclude everything but kernel and then flash
6/ Reboot
7/ run XZDualRecovery 2.7.71 from pc
Will this work @hamdogg, @jackie099 ???
blueether said:
After looking at XZDualRecovery 2.7.71 I think this will work
DONT TRY THIS AT HOME KIDS
1/ flash either my BE Rom or DoggRom
2/ DON'T reboot yet, go to advanced/ power off (CWM) [or back to the main menu, then go to reboot->power off (TWRP)]
3/ start flash tool / select Flash / Flashmode
4/ select .290 ftf
5/ deselect wipes (done on install or Rom), exclude everything but kernel and then flash
6/ Reboot
7/ run XZDualRecovery 2.7.71 from pc
Will this work @hamdogg, @jackie099 ???
Click to expand...
Click to collapse
Well... Deselecting kernel will keep recovery, deselecting wipes should keep data..
hamdogg said:
Well... Deselecting kernel will keep recovery, deselecting wipes should keep data..
Click to expand...
Click to collapse
maybe that should have read:
5/ deselect wipes (done on install of Rom) [Top Box]
5a/ exclude everything but kernel [Middle Box]
5c/ and then flash
at that stage it should boot on a locked bootloader with partial root access, then running XZDualRecovery would give full root and recoveries - It's my belief that our roms wont boot on a locked bootloader as is?
blueether said:
maybe that should have read:
5/ deselect wipes (done on install of Rom) [Top Box]
5a/ exclude everything but kernel [Middle Box]
5c/ and then flash
at that stage it should boot on a locked bootloader with partial root access, then running XZDualRecovery would give full root and recoveries - It's my belief that our roms wont boot on a locked bootloader as is?
Click to expand...
Click to collapse
No locked won't boot unless they flash stock kernel. Sounds about right. But I am on 9th Corona... :silly:
hamdogg said:
No locked won't boot unless they flash stock kernel. Sounds about right. But I am on 9th Corona... :silly:
Click to expand...
Click to collapse
Dont want to try as there is a large thunder storm above and I don't want to be in the middle of flashing something if the power goes out, and I'v had about 6h sleep in the last 3 days
:good: for work :good:
blueether said:
Dont want to try as there is a large thunder storm above and I don't want to be in the middle of flashing something if the power goes out, and I'v had about 6h sleep in the last 3 days
:good: for work :good:
Click to expand...
Click to collapse
Man i know how that feels. On holiday and yet people still go missing... Why can't they take a break!
hamdogg said:
Man i know how that feels. On holiday and yet people still go missing... Why can't they take a break!
Click to expand...
Click to collapse
Very OT, you lost another? - /me always has a PLB now when in the backcountry, work and play.
blueether said:
Very OT, you lost another? - /me always has a PLB now when in the backcountry, work and play.
Click to expand...
Click to collapse
Well yeah.... There's always someone missing.. Hard stastics: a little over 1500 each year, missing people never get found in New Zealand.
Messed up eh!!
Imagine the rest of the world...
What you doing now?
lemmon said:
Hi million thanks for your incredible work. I have a C6806 version.... Dyou know if the C6833 version will work for me if it is finally released?
I cannot be leave there is definitely a solution for our locked bootloader telephones
Many thanks nin advance
Click to expand...
Click to collapse
Sry, I rly dont know. I konw C6833 can flash C6802's ROM, and C6802 can flash C6833's ROM.
hamdogg said:
What you doing now?
Click to expand...
Click to collapse
testing the above... not working, no recoveries
re-locked BL
flashed kernel.sin etc
boots fine
run locked recovery, gets root, copies files etc - reboots but no recovery.
blueether said:
testing the above... not working, no recoveries
re-locked BL
flashed kernel.sin etc
boots fine
run locked recovery, gets root, copies files etc - reboots but no recovery.
Click to expand...
Click to collapse
flash this after flashing the rom to recovery
http://nut.xperia-files.com/downloa...kZHVhbHJlY292ZXJ5Mi43LjcxLUJFVEEuZmxhc2hhYmxl

[Guide]Rooting 14.2.A.1.136

This is still a WIP as Devs do their good work
[EDIT]
Although a few people seem to have had issues, I'm removing this big RED warning as these instructions work well where it says tested, but still: Use this guide at your own risk!!!
[/EDIT]
Rooting guide for the new 14.2.A.1.136 firmware:
This will void your warranty, don't flash without a full battery or if there is a black cat near by. If this bricks your Z-Ultra I blame the Waikato Draught
Upgrading from .290 already rooted Unlocked BL Working
Flash ftf and follow Coming from stock 14.2.A.1.136 with unlocked BL
Path 1. Coming from stock 14.2.A.1.136 with unlocked BL Tested as working
This will give you Dual Recovery (CWM+TWRP)
Download @Chainfire's SuperSU http://download.chainfire.eu/supersu
Download @jackie099's kernel and recovery: http://forum.xda-developers.com/showthread.php?t=2631866
Copy SuperSU to SD card of phone
Flash @jackie099's recovery kernel from flashtool (boot into fastboot mode)
Boot into recovery
Flash SuperSU update from recovery
Re-boot
Path 2. Coming from stock 14.2.A.1.136 with unlocked BL Tested as working
This will give you these Recoveries (CWM & PhilZ Touch & TWRP)
Download @ChillyChan's dual recovery kernel https://db.tt/MSIQ5ZNW (read about it here http://forum.xda-developers.com/showthread.php?t=2575909)
Download XZDualRecovery kernel with recovery http://nut.xperia-files.com/downloa...kZHVhbHJlY292ZXJ5Mi43LjgwLUJFVEEuZmxhc2hhYmxl
Download @Chainfire's SuperSU http://download.chainfire.eu/supersu
Copy SuperSU and XZDualRecovery to SD card of phone
fastboot boot (hotboot from flashtool) @ChillyChan's dual recovery kernel (we only want to boot this kernel/recovery, not flash it)
Flash XZDualRecovery from recovery
Flash SuperSU update from recovery
Re-boot
If you only have partial root then change /sys/kernel/security/sony_ric/enable (from '1' to '0')
Coming from stock 14.2.A.1.136 or 14.2.A.0.290 with locked BL
Get a rooted .290 install then continue from below "Upgrading from .290 already rooted Locked BL"
To get root on .290 follow below or [NUT]'s/jackie's stock .290 for locked BL
Flash [NUT]'s .532 http://forum.xda-developers.com/devdb/project/dl/?id=3442 (read guide here http://forum.xda-developers.com/showthread.php?t=2593918)
skip setup
settings
- enable dev settings
- enable usb debuging
Root with this tool: http://forum.xda-developers.com/showthread.php?t=1886460
- Option 0
Run http://forum.xda-developers.com/showthread.php?t=2426739 to get recovery
Download DoggRom for C6833
Download latest ZU-lockeddualrecovery2.7.xx-BETA.flashable.zip
Save both to SD card
Download .136 ftf for your Ultra - Save in flashtool firmware folder
Now comes the tricky bit
Charge phone - I used 40% of the battery while doing this
Reboot to recovery
Wipe Data
Flash a stock based rom (DoggRom for c6833 or [NUT]'s etc) from recovery - DON'T REBOOT
Flash ZU-lockeddualrecovery2.7.xx-BETA.flashable.zip from recovery
POWER OFF the phone - don't reboot
Start flashtool
Select flash
Select Flashmode
Select the .290 ftf or .136 ftf
[Top Box] Uncheck everything
To make sure that there are no mismatch issues like on the Z1 that has lead to DEAD devices
[Middle Box] Check excludes for system only. We may need at least all of these: KERNEL, ELABEL, BOOTBUNDLE, AND BASEBAND
Flash
Reboot phone when done
Run XZDualRecovery 2.7.xx from the pc to get recovery if needed
Upgrading from .290 already rooted Locked BL Should be working
The easiest way ATM is to use [NUT]'s 136 ROM ( testing stages):
http://forum.xda-developers.com/showthread.php?t=2631768
Thankyou to these good folk.
With out your work all of this would be most difficult.
@jackie099 and @[NUT] for the base of the rooting guide for .290 on locked BL
@chemcup for the FTF
@ChillyChan & @[NUT] & @jackie099 for the recoveries and kernels
@abuihsan for the ric tip
many more as well...
Please feel free to add tips to this guide, and I'll keep it updated.
where can i download 136 ftf?
Edit: never mind.. I found it.
jackie099 said:
where can i download 136 ftf?
Edit: never mind.. I found it.
Click to expand...
Click to collapse
Updated OP with a link
I guess I should put a thanks section in as well
Thanx for your instructions, but maybe I will stick to z1 post for flashing 136 instruction ..way more simple
Sent from my C6833 using XDA Premium HD app
skylinestan said:
Thanx for your instructions, but maybe I will stick to z1 post for flashing 136 instruction ..way more simple
Sent from my C6833 using XDA Premium HD app
Click to expand...
Click to collapse
Ihaven't read that thread, got a link?
The locked BL instructions are more or less the same as [NUT]'s for the .290 except for the extra steps as we don't have a rooted rom yet, or were you talking about the first instructions?
The instructions are very detailed to help reduce questions...
On unlocked bootloader Dual-Kernel not working properly. This kernel is for 290 firmware only.
To have ROOT need to flash back kernel only from 136 firmware by FlashTool
y0ung said:
On unlocked bootloader Dual-Kernel not working properly. This kernel is for 290 firmware only.
After flashing back kernel only from 136 firmware ROOT is uncompleted, I can't mount system partition in RW mode...
Click to expand...
Click to collapse
We don't want to flash the dual recovery kernel for .290, we just need to hotboot a recovery to flash the second kernel, the XZDualRecovery one
blueether said:
We don't want to flash the dual recovery kernel for .290, we just need to hotboot a recovery to flash the second kernel, the XZDualRecovery one
Click to expand...
Click to collapse
What do you think of the new FW @blueether?
Worth the upgrade from .290?
hassanmahmood said:
What do you think of the new FW @blueether?
Worth the upgrade from .290?
Click to expand...
Click to collapse
First impressions, they have turned up the touch-screen again as i had a few phantom clicks. Not used it in anger yet, just one phone call.
If @hamdogg dosn't cook up a stock rom over the weekend I might do one with root and XZDualRecovery
http://forum.xda-developers.com/showthread.php?t=2628185
This thread is from NUT
Sent from my C6833 using XDA Premium HD app
skylinestan said:
http://forum.xda-developers.com/showthread.php?t=2628185
This thread is from NUT
Sent from my C6833 using XDA Premium HD app
Click to expand...
Click to collapse
Of cause that is easer, [NUT] has built a flushable zip :silly:
If I, [NUT], hamdogg, etc do the same for the ZU then it will be that easy here as well
ps and I had seen that thread
blueether said:
First impressions, they have turned up the touch-screen again as i had a few phantom clicks. Not used it in anger yet, just one phone call.
If @hamdogg dosn't cook up a stock rom over the weekend I might do one with root and XZDualRecovery
Click to expand...
Click to collapse
working on it. Thought I had it, but it boots in like 4 seconds. then goes black, flashes my bootlogo, then takes about 10 seconds to boot, and displays a black screen. When i sleep it, and then unlock it it works fine. google services reports an error, but clearing app data fixed that. But then also getting reboots... I think there is a subtle kernel difference as when i flashed the FTF it works fine. flashing .290 kernel does the same thing. random reboots...
I think I need a break. 3 days without sleep and the pills are wearing off i think.
---------- Post added at 10:32 AM ---------- Previous post was at 10:27 AM ----------
I have noticed that the touch vibrations are less intensive. That the screen is snappier.. I don't think its a sensitivity issue as changing the sensitivity in the ROM still make it snappier, but lessens the sensitivity. So not sure what Sony did there. But I like it.
(not that this is me currently not using a screen protector on my brand new unit)
There are a few more apps included but thats probably an FTF issue. i.e. European apps.
hamdogg said:
I think I need a break. 3 days without sleep and the pills are wearing off i think.
Click to expand...
Click to collapse
Yeah I haven't attempted as I've been up early all week and long hours...
something is not right here after following steps for the unlocked instruction the wifi stopped working
I think my device is screwed up again for something that might have been tested properly i should have waited before following this thread instructions, now I can not enter into flash mode using flash tool and the whole phone is a mess
I try to enter flash mode but its not allowing me to do that
I
wifi does not work
when posting something critical as rooting guide at least make 100% sure things work, it was a headache to re flash tft
hykhleif said:
when posting something critical as rooting guide at least make 100% sure things work, it was a headache to re flash tft
Click to expand...
Click to collapse
Which model phone do you have and did you do ub or lb steps?
Sent from my C6806 using XDA Premium HD app
C6833, UB, wifi dose not work after flashing
blueether said:
Updated OP with a link
I guess I should put a thanks section in as well
Click to expand...
Click to collapse
I can't updating for C6802 via Sony PC Companion, had error ( may be my ZU UBL).
Please show me where I can down C6802 the ROM FTF !
Worked for me
Thanks for the guide!.
After following the instructions my phone is now working fine, including wifi, but system read/write only works one minute after it boots so xposed doesnt work either. im an idiot that forgot to install the apk for xperia devices using 4.3 (http://forum.xda-developers.com/showpost.php?p=48484642&postcount=6846). I read the XZDualRecovery thread and aparently this was fixed in beta 2.7.80, the same one posted here, but for me it didnt do the trick.Im just posting this here so other people are aware that there might be problems with it, after all its a wip.. Now everything its working fine, Thanks again
(Using a c6802 with an unlocked bootloader, came from a c6802 stock .290, flashed .136 c6833 ftf from germany)

[Q] Newest firmware 23.0.1.A.4.30, never had root on device

Hi,
My device the SGP511 has never been rooted and I updated already to the newest firmware which may be a bad thing cause I hear I have to unlock bootloader but I cant backup TA without root, so I am stuck in a catch 22. Am I able to go back to an older firmware, do I have to unlock bootloader and lose Sony warranty? What options do I have?
Edit: I wasnt clear, I want to get root access, which was the reason for this post
chrisdab said:
Hi,
My device the SGP511 has never been rooted and I updated already to the newest firmware which may be a bad thing cause I hear I have to unlock bootloader but I cant backup TA without root, so I am stuck in a catch 22. Am I able to go back to an older firmware, do I have to unlock bootloader and lose Sony warranty? What options do I have?
Edit: I wasnt clear, I want to get root access, which was the reason for this post
Click to expand...
Click to collapse
- Download .314 ftf file of your choice and flash it via Flashtool. (Downgrade)
- Root your device method you chooce. (EasyRootTool, Newroot, Flashtool, XZDualrecovery)
- Backup your TA
- Install XZDualrecovery
- Flash latest prerooted firmware for your device via custom recovery
- Do what ever you want with your device
Basicly no need to unlock your bootloader just to achieve root. You just need to downgrade to rootable firmware and then update it to the latest by flashing prerooted firmware via custom recovery. Or after you achieve root and backed up TA you could unlock your bootloader and etc...
kulvertti said:
- Root your device method you chooce. (EasyRootTool, Newroot, Flashtool, XZDualrecovery)
Click to expand...
Click to collapse
Which method do you recommend?
I downloaded and flashed D6503_1281-9709_17.1.2.A.0.314_R4A_Customized US.ftf using Flashtool. I thought I did everything right, but my tablet wont start up. I get the vibration when I press the power button, but nothing else.
How do I fix this?
chrisdab said:
Which method do you recommend?
Click to expand...
Click to collapse
EasyRootTool
chrisdab said:
I downloaded and flashed D6503_1281-9709_17.1.2.A.0.314_R4A_Customized US.ftf using Flashtool. I thought I did everything right, but my tablet wont start up. I get the vibration when I press the power button, but nothing else.
How do I fix this?
Click to expand...
Click to collapse
You use wrong ftf file that is meant for Z2 phone. Download SGP511 .314 ftf file for example this one:https://mega.co.nz/#!kcxxjaLA!itErjRi2fYPPswal-c7XasF_lAvPKyY4GwEzY3xgHZ0 and flash it via Flashtool.
kulvertti said:
EasyRootTool
You use wrong ftf file that is meant for Z2 phone. Download SGP511 .314 ftf file for example this one:{im not allowed to post urls yet} and flash it via Flashtool.
Click to expand...
Click to collapse
I keep getting a Decryption error when trying to download that file from mega.co.nz. I tried downloading their chrome app and it still doesnt decrypt the file.
Cool, I got it rooted, now to the TA backup step
To get download to work on mega.co.nz, I used a download manager JDownloader.

Categories

Resources