Related
Hi,
I use Sky Station/Update to update my Sky Vega S IM-A730S, but after the download, and rebooted the phone, phone just keeps rebooting and rebooting.
Phone is not recognized by the computer anymore. How can it go to Fastboot as suggested by the other site? How can I use ADB if the phone is not recognized by the computer even drivers are already installed?
How can I revived this phone??
Thanks in Advance.
Note: No Custom Recovery image has been installed but the phone was already rooted before the update.
ill help you
bedodot said:
Hi,
I use Sky Station/Update to update my Sky Vega S IM-A730S, but after the download, and rebooted the phone, phone just keeps rebooting and rebooting.
Phone is not recognized by the computer anymore. How can it go to Fastboot as suggested by the other site? How can I use ADB if the phone is not recognized by the computer even drivers are already installed?
How can I revived this phone??
Thanks in Advance.
Note: No Custom Recovery image has been installed but the phone was already rooted before the update.
Click to expand...
Click to collapse
just do the IE upgrade and install the drivers of your phone thats all haha thank me after this
Help
i have the same problem too on my im a800s(vega sky lte)...somebody help me..
sky730s
Model:
Pantech Sky Vega IM-A730S
Problem:
This phone is rooted...
I used Titanium Backup to delete the bloatwares including the stock keyboard and stock launcher...
My wrong move is I didnt restore the stock launcher and stock keyboard before I wipe this phone...
After I wipe the phone, it booted normally but it has no launcher so i cannot navigate on menu...
When Im trying to use the search button to access settings and activate the USB debugging, the keyboard doest work too...
I cant type anything...
Im screwed...debugging is not active
Please help me...
Note:
This phone doesnt have permanent CWM... It only has 3e recovery...
Sorry for my bad English.
Hi, I'm new to this site..
So when I could not find stock recovery I tried this so called CMW recovery touch version, and as soon as I installed it my device doesn't boot anymore. it stuck at iBall logo and stuck there forever! I tried to connect it to Computer via USB. apparently, WinXP cant not find the device or any USB device for that matter. But somehow when I hold. and press Back key and Power button, the device LED is on(means somehow alive) with a blank screen and WinXP find ?USB Device!(?)
How to I restore my tablet! please help...
This tablet is Rebranded!
Info:
Model:iBall Slide i6012
RAM:1GB
INTERNAL MEMORY:8GB
SCREEN: 800×480 CAPACITIVE TOUCH
CPU:1.2gz Allwinner A10
Android Version :ICS 4.0.4
Please help me......
I've tried "use pin to restore " and "button combination " but not luck!
Before installing this,I install another WORKING(KIND OF) cwm modified. img.
You need a recovery specific to your device, provided you flashed it to the correct, i.e. recovery, partition.
thanks
bodh said:
You need a recovery specific to your device, provided you flashed it to the correct, i.e. recovery, partition.
Click to expand...
Click to collapse
The problem is that Window can not find my device. Sometimes it only appear as USB device and other times it doesn't recozniged at all. I tried updating ADB driver but that dont do any help...
http://forum.xda-developers.com/showpost.php?p=20058157&postcount=1 try these.
also, "A. Install the drivers
1) Do not install the Samsung drivers or the pdanet drivers, or any other driver you come across. If you have, and you are SURE they are working properly, fine, leave them. Otherwise uninstall them if you are unsure;
2) Download the drivers from here;
3) Install the drivers. This step is the only part of the entire process that is not easy to explain, and may cause users some issues, depending on what drivers they had installed previously, what OS they are using, etc. etc. Bourne-nolonger has put together a very detailed step-by-step on how to install them. If you don't know how to install them, have a look at his post here. Note that the driver has to install twice: once when your device is booted normally (not required for this tutorial) with USB Debugging enabled in Settings, and once when your device is booted in fastboot (i.e., bootloader) mode (which is required for this tutorial). If you are using Windows 8, you will need to do this before installing the drivers."
from http://forum.xda-developers.com/showthread.php?t=1626895
I'll try it!
bodh said:
http://forum.xda-developers.com/showpost.php?p=20058157&postcount=1 try these.
also, "A. Install the drivers
1) Do not install the Samsung drivers or the pdanet drivers, or any other driver you come across. If you have, and you are SURE they are working properly, fine, leave them. Otherwise uninstall them if you are unsure;
2) Download the drivers from here;
3) Install the drivers. This step is the only part of the entire process that is not easy to explain, and may cause users some issues, depending on what drivers they had installed previously, what OS they are using, etc. etc. Bourne-nolonger has put together a very detailed step-by-step on how to install them. If you don't know how to install them, have a look at his post here. Note that the driver has to install twice: once when your device is booted normally (not required for this tutorial) with USB Debugging enabled in Settings, and once when your device is booted in fastboot (i.e., bootloader) mode (which is required for this tutorial). If you are using Windows 8, you will need to do this before installing the drivers."
from http://forum.xda-developers.com/showthread.php?t=1626895
Click to expand...
Click to collapse
I'll try it....
USB is death!
hello again!,
I tried that and it does not work!
Computer can not even find my device.
When I plug in charger or USB cable,tab is light up and display iball logo and from there it stuck!
I mean it stuck forever!
What is APX mode?
Somehow when I press Menu and while still holding I pressed the power button simultaneously and my Computer Show "Unrecognized USB Device".
Please anyone help me. I dont even have the stock firmware to flash(if required) with!
Their Customer service is neglecting me and I'm really pisses!
Give me some light anyone
fastboot can not even open in my computer when I download and try to open! it said "can't find Winusbapi.dll"
while "winusbapi.dll" was in the same folder as the "fastboot.exe"!
I'm very new to this and it would be a great help if you can guide me to revive my only tablet!
After a little research, do you mean this recovery? [Not cwm at all] http://www.slatedroid.com/topic/35183-custom-recovery-for-c8a8m7/
Did you choose an option to flash it through partitions and storage menu? Did it allow you to back up your stock setup first (hopefully, if it is cwm-modeled)? If not, then I'm not sure I can help. Looks like your recovery is a recovery AND a kernel, packed into one [just leaned about this from a recent xda story]. I also found this: https://github.com/namko/midRecovery/downloads, with several other BETA versions. Maybe it would help you to google "iball slide". There is a stock 4.1.1 image on xda, which could also help. But overall, it looks like there is not much development for this device, and you should've researched the risks BEFORE tampering with your device!
p.s. I do not know what apx mode is. Also, is winusbapi.dll something that needs to be installed? Click it and see!
completely invisible to Computer.
Hi, can you show me the stock 4.1.1 image. I tried to find it but couldn't get it.
Please post a link here....
No, I did not flash with that modified recovery.
I'm. still amaze how a recovery.img can kill my tablet.
Im stuck in iBall logo. whenever I plug in tablet light up even if I switch it off before charging.
Window can only find my device as "Unknown USB Device ".
I updated ADB and still doesn't work.
I tried google and can not find anything other than piece by piece similarities.
all I want is to flash the stock recovery back!
I can not do it because my ADB is not recognizing my tablet!
I really appreciate your help though!
kcisrael said:
Window can only find my device as "Unknown USB Device ".
Click to expand...
Click to collapse
What ID "Unknown USB Device" in Device Manager?
I was wrong, it's an AOSP based rom; but it's a beta, and i will not recommend it, as it is probably quite far from stock. You didn't answer if that slate droid link is the recovery you took. That says it is not flashed, but rather externally booted.
This kind of recovery.img could kill a tablet in the following way: it looks as though these devices have both the kernel and the recovery together. [there's a recent xda article about a sony bootloader that addresses this.] If the kernel is bad, the device does not boot. Can you try a factory reset from your recovery's menu? So which recovery do you have, i.e. what does it say along the top?
can't see recovery menu
bodh said:
I was wrong, it's an AOSP based rom; but it's a beta, and i will not recommend it, as it is probably quite far from stock. You didn't answer if that slate droid link is the recovery you took. That says it is not flashed, but rather externally booted.
This kind of recovery.img could kill a tablet in the following way: it looks as though these devices have both the kernel and the recovery together. [there's a recent xda article about a sony bootloader that addresses this.] If the kernel is bad, the device does not boot. Can you try a factory reset from your recovery's menu? So which recovery do you have, i.e. what does it say along the top?
Click to expand...
Click to collapse
No, I did not flash with that recovery link you provided.
And I can not go beyond the "iBall" logo in the tab. So,no recovery menu. Also I tried all sort of Factory reset like "key" combination and "pinhole", none of them works!
can you help?
AllexBast said:
What ID "Unknown USB Device" in Device Manager?
Click to expand...
Click to collapse
hi,
ID:USB\VID_1F3A&PID_EFE8\5&1D3934BB&0&3
Need to remove the "Unknown USB Device" and install the driver again
No luck!
AllexBast said:
Need to remove the "Unknown USB Device" and install the driver again
Click to expand...
Click to collapse
Still the same!!!
kcisrael said:
Hi, I'm new to this site..
So when I could not find stock recovery I tried this so called CMW recovery touch version, and as soon as I installed it my device doesn't boot anymore. it stuck at iBall logo and stuck there forever! I tried to connect it to Computer via USB. apparently, WinXP cant not find the device or any USB device for that matter. But somehow when I hold. and press Back key and Power button, the device LED is on(means somehow alive) with a blank screen and WinXP find ?USB Device!(?)
How to I restore my tablet! please help...
This tablet is Rebranded!
Info:
Model:iBall Slide i6012
RAM:1GB
INTERNAL MEMORY:8GB
SCREEN: 800×480 CAPACITIVE TOUCH
CPU:1.2gz Allwinner A10
Android Version :ICS 4.0.4
Please help me......
I've tried "use pin to restore " and "button combination " but not luck!
Before installing this,I install another WORKING(KIND OF) cwm modified. img.
Click to expand...
Click to collapse
Download these USB debugging drivers...
http://www.mediafire.com/download/53vp6c6ka86rk3q/iBall_slide_Debugging_drivers.zip
and install them in your PC...
hope your PC will recognize your slide
bro how to hard reset using keys..??
kcisrael said:
hi, i'm new to this site..
So when i could not find stock recovery i tried this so called cmw recovery touch version, and as soon as i installed it my device doesn't boot anymore. It stuck at iball logo and stuck there forever! I tried to connect it to computer via usb. Apparently, winxp cant not find the device or any usb device for that matter. But somehow when i hold. And press back key and power button, the device led is on(means somehow alive) with a blank screen and winxp find ?usb device!(?)
how to i restore my tablet! Please help...
This tablet is rebranded!
Info:
Model:iball slide i6012
ram:1gb
internal memory:8gb
screen: 800×480 capacitive touch
cpu:1.2gz allwinner a10
android version :ics 4.0.4
please help me......
i've tried "use pin to restore " and "button combination " but not luck!
before installing this,i install another working(kind of) cwm modified. Img.
Click to expand...
Click to collapse
plz help me how to hard reset>>>
[HELP] Bootloop after flashing: recovery-clockwork-6.0.3.1-p4.zip -> NOOB!!!!
I`ve just tried everything related to this issue on this forum!!
Before the bootloop i had access to the adb and fastboot features by usb debbugging (sdk manager) and stock recovery, etc...
With the Bootloop, now i can´t access to the stock recovery with the 1001 combinations of the buttons, removing the battery, pressing the volume button and then connect to the pc via usb, adb reboot, and so on and so on.... nothing works!!
The pc only recognizes via usb the Tab (1 second) asking for MT65xxPreloader, like a bootlooping asking for this controller. I´ve installed this controller and the bootloop remains - 1 second each boot...
Anyone can help me to solve this dead brick? Is is not possible make a startup disk via sd card like exists for windows, for example??
Without PC connection i don't see the solution.....
Thanks in advance!!
You will need to use mtk software to enter meta mode.
Sent from my A1-810 using XDA Premium HD app
KieranFoot said:
You will need to use mtk software to enter meta mode.
Sent from my A1-810 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks for your answer!
My device can´t still enable to enter in meta mode. I tried MT6573, MT6577, MT6589 VCom driver, the SP Flash tool doesn´t locate the DA path for the function download scatter loading file.....
I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=2206421&nocache=1, for windows Vista. It seems the controller is installed, but the SP flash tool or MTK tool doesn´t recognize my iconia A1-810.... I loaded the *.txt file: MT6577_Android_scatter_emmc.txt and marked all options ans appears a error: FLASHTOOL ERROR: S_FTHND_FILE-IS-NOT-LOADED-YET (5007)
I disconected the battery and when i connect usb to pc the driver apppear for 1 second with the Mediatek Preloader vcom controller and enter in loop again... appear and disappear on the PC Device Manager.....
I´m completely lost.. can you suggest something?
Thanks
flashtool error image attached
check it maybe will help, good luck !
I bought my Acer A1-810 it’s 2,5 months (from amazon). And few days ago I decided to root it. 1 hour later i realized that was not a really good idea, because i did not know much things about, and it was not as easy as I thought. and voila as a result : bootloop !
I tried different roms, different update.zips but got allways the same error : ” check.partition.size=[__PROP_UNDEFINED__] ”
I was desperate…I was at the point of resend it to Acer for repair. But last try was successful, I did it, I did !!! And there is how !
1. go to acer web page --->support--->drivers and manuels
2. choose your model acer a1-810
3. As my divece was bought in usa, my FW upgrade is AV052.RV26RC06.PA.CUS1 (in O.S ), download it !
4.when it’s done, you should unzip and should get update.zip separately.
5. Put update.zip on SD card
6.Put SD card in your device.
For next steps see the manuel of update
Hi dude, Just wanna ask how to fix my lenovo a680 boot loop problem. When I enter to the recovery mode there is no "Advance" Option in my stock recovery. Also every time i tried to connect my phone to a laptop/ desktops it disconnects instantly. I tried different usb cables, but the problem still persist. I really don't know what I'm gonna do. I also tried ADB but it wont connect to my phone it says "Error: Devices not found" My only chance on repairing my phone is using a 2gb sd card. Which I also tried. I tried to flash stock rom on it but it says "Installation aborted" There is also a resting robot with a red triangle and an exclamation point on it. Which says " No Command" So if you can help me, that would mean a lot to me. Thanks in advance!
The last way u can do is "Factory Reset" using stock recovery.., hit thanks if I help you..
rpav_27 said:
Hi dude, Just wanna ask how to fix my lenovo a680 boot loop problem. When I enter to the recovery mode there is no "Advance" Option in my stock recovery. Also every time i tried to connect my phone to a laptop/ desktops it disconnects instantly. I tried different usb cables, but the problem still persist. I really don't know what I'm gonna do. I also tried ADB but it wont connect to my phone it says "Error: Devices not found" My only chance on repairing my phone is using a 2gb sd card. Which I also tried. I tried to flash stock rom on it but it says "Installation aborted" There is also a resting robot with a red triangle and an exclamation point on it. Which says " No Command" So if you can help me, that would mean a lot to me. Thanks in advance!
Click to expand...
Click to collapse
bootloop? were you trying to root.flash anything? Never mind. flash a custom recovery cwm, twrp of your choice. then,
full wipe from there. and flash lenovo a680 stock firmware from here. this will delete everything.not sure of internal sd card.there are also flash instuctions too. Hope this fix it. After you flash i think you will get your stock recovery back.
HIT THANKS IF I HELPED. DON'T FORGET TO HIT THANKS.
LINK HERE:
androidxda.com/download-lenovo-stock-rom-models
Edit: you weren't able to flash from phone because stock recovery can't flash roms.. it can't wipe system partition.
Hi thank you for your suggestion but i tried everything but i can't flash any roms because every time i connect my phone through a laptop or a desktop it disconnects automatically within 3-5 seconds. I also tried flashing rom through an sd card but i get a "Installation aborted" I also tried flashing a recovery but my problem is the disconnection between my phone and my laptop, i tried different cables and sockets but it's still the same. When I tried to use the usb cable to another phone it doesn't disconnect. I also tried using adb but when it's starting to install the zip file it disconnects also. I tried everything.
Hi MicroMonster Thank you for your suggestion but I tried that a thousand times, I've tried clearing the partition and the cache and everything but it doesn't do the job.
rpav_27 said:
Hi MicroMonster Thank you for your suggestion but I tried that a thousand times, I've tried clearing the partition and the cache and everything but it doesn't do the job.
Click to expand...
Click to collapse
Hello there..How you'r phone,did u fix or found any solution yet?If not,i'm ready to help.
Need help
Mafi91 said:
Hello there..How you'r phone,did u fix or found any solution yet?If not,i'm ready to help.
Click to expand...
Click to collapse
Hey bro, do u have a link for stock rom for this phone? Im going to load the rom via sideload. Thanks!
hristcroixqwerty said:
Hey bro, do u have a link for stock rom for this phone? Im going to load the rom via sideload. Thanks!
Click to expand...
Click to collapse
http://androidxda.com/download-lenovo-stock-rom-models
here you can find and download any stock rom for lenovo smartphone
i tried to download lenovoA680 stockrom in that link and everytime i reach 50% the download stop progressing do you have other link where i can download the stockrom?
please help..soft brick problem
hi, I got the same problem.
My Lenovo A680_row phone was stuck on its logo upon start up (boot loop, I guess).. I tried the recovery mode but nothings happen. So I decided to use SPFT to flash new rom. I think the driver installed successfully,my phone is being detected showing MTK USB port on device manager of pc but eventually only for a few seconds,then it will disconnect,hence I wont be able to flash new rom using SPFT.. how will i solved this?I tried a lot of drivers from the net and used different usb connector but still goes with the same problem.. hope someone could help me with this..thanks!
---------- Post added at 06:18 AM ---------- Previous post was at 06:08 AM ----------
Mafi91 said:
Hello there..How you'r phone,did u fix or found any solution yet?If not,i'm ready to help.
Click to expand...
Click to collapse
hi Mafi92..I got the same problem..pls help My Lenovo A680_row phone was stuck on its logo upon start up (boot loop, I guess).. I tried the recovery mode but nothings happen. So I decided to use SPFT to flash new rom. I think the driver installed successfully,my phone is being detected showing MTK USB port on device manager of pc but eventually only for a few seconds,then it will disconnect,hence I wont be able to flash new rom using SPFT.. how will i solved this?I tried a lot of drivers from the net and used different usb connector but still goes with the same problem.. hope someone could help me with this..thanks!
Hi dude, Just wanna ask how to fix my lenovo a680 boot loop problem
Hi dude, Just wanna ask how to fix my lenovo a680 deadboot problem how to revive pls hep me
LENOVO A680 Bootloop solution + Update THIS SHOULD HELP
try SEARCHING ON GOOGLE :
lenovoa680transcrypto.blogspot
hi
I'm having a similar problem that when connecting with the USB the device shows very briefly in device manager, less than 1 sec and then it's gone.
Hello guys,
im starting to lose hope that my phone will ever get to work again. I tried flashing a rom via TWRP, which led into a bootloop. After that I tried flashing another version of TWRP, which let to the fact, that everytime I now press Power + Volume down it also gets into a bootloop and does not show up TWRP. After that I tried connecting it to my PC in Fastboot mode, but since no USB-Debugging is enabled and cant be enabled, it is also not working, even with Universal Adb drivers installed, windows does not recognize any device is connected... so my question is, if there is any hope left or my phone is just dead...
I really hope you can help me.
Leon
[email protected] said:
Hello guys,
im starting to lose hope that my phone will ever get to work again. I tried flashing a rom via TWRP, which led into a bootloop. After that I tried flashing another version of TWRP, which let to the fact, that everytime I now press Power + Volume down it also gets into a bootloop and does not show up TWRP. After that I tried connecting it to my PC in Fastboot mode, but since no USB-Debugging is enabled and cant be enabled, it is also not working, even with Universal Adb drivers installed, windows does not recognize any device is connected... so my question is, if there is any hope left or my phone is just dead...
I really hope you can help me.
Leon
Click to expand...
Click to collapse
Did you tried the Mega unbrick Guide?
Never loose hope buddy we have many devs here to help us
Try this it will help you for sure
http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
faap25 said:
Try this it will help you for sure
http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
Click to expand...
Click to collapse
Thank you for your help. I was trying to do it with this mega unbrick guide, but at step 4 I connected it to my pc and the device manager didn't show up anything. Do I need to install any drivers before doing that or uninstall the adb drivers I previously installed?
Thank you
Finally it worked! The problem was the usb cable I was using!