Hi Guys I have spent past 5 days searching google watching videos on youtube and I still have issue with my Ericson Xperia X10
I have downloaded Flash tool and that stuck on reading device part and does not go any more.
I have downloaded updates service but it cuts of after url downloaded the software need it, and when it tries to update the phone it self.it says fail I tried this few times.still same thing.
I have downloaded Sony PC Companion same thing it will not update.
I tried videos on youtube from plugin phone in to main charger not the PC and sticking down the on button still nothing happens
I also tried pressing Volume and on button same time still nothing happens.
if I plug the phone in main charger it blinks with red light if I try and turn it on it will blink 3 times with red light and nothing happens
on some occasions it will have steady green light for about 5 minutes and then it just goes off and no green light and no blinking.
This is really frustrating for me and any help would be greatly appreciated.
I have Sony Ericsson xperia x10 ( white version ) please advice.
Thanks guys.
The red flashing LED generally indicates the battery is completely depleted.
Plug the phone into a wall charger and leave it for a few hours, after which (hopefully) you should see an solid red/orange light as it charges.
If it does start to charge when the red LED stops flashing and you get a solid red/orange LED I would suggest to charge it for a good 12hrs+
If may take over an hour before the red flashing LED stops and turns a solid red/orange depending on battery state.
For best charging(and if you still have it) use the original Sony EP800 charger with Sony EC600L cable that came with the phone, as this 'pumps' the largest amount of Amps into the battery and charges quicker.
If you don't get a solid red/orange LED on the phone after approx 3-4hrs charging, then you may need to look at purchasing a new battery.
Dr Goodvibes said:
The red flashing LED generally indicates the battery is completely depleted.
Plug the phone into a wall charger and leave it for a few hours, after which (hopefully) you should see an solid red/orange light as it charges.
If it does start to charge when the red LED stops flashing and you get a solid red/orange LED I would suggest to charge it for a good 12hrs+
If may take over an hour before the red flashing LED stops and turns a solid red/orange depending on battery state.
For best charging(and if you still have it) use the original Sony EP800 charger with Sony EC600L cable that came with the phone, as this 'pumps' the largest amount of Amps into the battery and charges quicker.
If you don't get a solid red/orange LED on the phone after approx 3-4hrs charging, then you may need to look at purchasing a new battery.
Click to expand...
Click to collapse
Hi thank you for your reply
My issue is this when I plug it in to main charger and not PC solid green light comes on for about 2 minutes and then nothing no blinking lights or anything any ideas or suggestions on this please?
oOSTAROo said:
Hi thank you for your reply
My issue is this when I plug it in to main charger and not PC solid green light comes on for about 2 minutes and then nothing no blinking lights or anything any ideas or suggestions on this please?
Click to expand...
Click to collapse
Try removing the battery from the phone and leaving it out of the phone for 2-3hrs.
The green LED indicates it's in 'Flash mode' and thinks it's waiting to start/complete a firmware install.
I'm guessing you don't have a Sony EP800 charger and Sony EC600L cable and that you using some other combination of charger/cable.
[Update]
After the battery has been removed from the phone (overnight would be good) then insert the battery back in the phone and see if you get a solid red/orange/green charging light and if so, charge for 12hrs+
The reason I ask about the Sony EP800 charger and cable, is that I know it provides over 900mAh draw which means the phone 'should' know it's a AC wall charger, but many other charger/cable combinations only provide a USB ~500mAh draw which could prompt the phone to think it's still attached to a PC and thus remain in it's last connected state. i.e. Flash mode.
Just an idea.
Dr Goodvibes said:
Try removing the battery from the phone and leaving it out of the phone for 2-3hrs.
The green LED indicates it's in 'Flash mode' and thinks it's waiting to start/complete a firmware install.
I'm guessing you don't have a Sony EP800 charger and Sony EC600L cable and that you using some other combination of charger/cable.
Click to expand...
Click to collapse
Thank you for your reply again this is the charger I have
ebay.co.uk/itm/Genuine-Mains-Home-Micro-USB-Walls-Charger-For-Sony-Ericsson-Xperia-X10i-UK-/140647228895
It is genuine sony ericsson charger usb can plug in to charger it self or in PC as seen on above link. I have removed battery now and will wait for few hours and will try again as you advised above.
Thank you again for your prompt reply will update this thread tomorrow see how it goes. Have a good night.
oOSTAROo said:
Hi Guys I have spent past 5 days searching google watching videos on youtube and I still have issue with my Ericson Xperia X10
I have downloaded Flash tool and that stuck on reading device part and does not go any more.
I have downloaded updates service but it cuts of after url downloaded the software need it, and when it tries to update the phone it self.it says fail I tried this few times.still same thing.
I have downloaded Sony PC Companion same thing it will not update.
I tried videos on youtube from plugin phone in to main charger not the PC and sticking down the on button still nothing happens
I also tried pressing Volume and on button same time still nothing happens.
if I plug the phone in main charger it blinks with red light if I try and turn it on it will blink 3 times with red light and nothing happens
on some occasions it will have steady green light for about 5 minutes and then it just goes off and no green light and no blinking.
This is really frustrating for me and any help would be greatly appreciated.
I have Sony Ericsson xperia x10 ( white version ) please advice.
Thanks guys.
Click to expand...
Click to collapse
Hi did you install the driver's for flashtool from the folder?
If your SEUS file failed during download then re-download it and go back to stock.
It will update itself and restart be patient :good:
After the install is finished Sony Update Service start's up then follow the on screen instruction's. Agree to license - click Start - Choose x10 - press next etc
Just Follow onscreen Instructions
If your phone has trouble with back key and plug in usb,
Then leave the usb plugged into both phone and computer with your battery out!
Then hold back key and put your battery in :good:
doodownunda said:
Hi did you install the driver's for flashtool from the folder?
If your SEUS file failed during download then re-download it and go back to stock.
It will update itself and restart be patient :good:
After the install is finished Sony Update Service start's up then follow the on screen instruction's. Agree to license - click Start - Choose x10 - press next etc
Just Follow onscreen Instructions
If your phone has trouble with back key and plug in usb,
Then leave the usb plugged into both phone and computer with your battery out!
Then hold back key and put your battery in :good:
Click to expand...
Click to collapse
After trying everything as suggested still have issues so I have ordered original battery for my xperia x10 when it arrives I will try again see if I can turn my phone on. Thanks for all the great suggestions
Reflash 2.3.3 firmware using flashtool
Related
Hi all.
My phone seems to be broken. It's almost completely dead. When I press the power button the led blinks red three times. When I connect it to power it blinks red once every other second. Anyone knows what this red blinking means? I'm sure it's a code for something...
I've tried removing sd and sim and also disconnecting and connecting the battery cable with no result. Anything else I could try or is it just a matter of sending it away and being without phone for some weeks?
/Daniel
Battery is completly drained. Charge it about half an hour and should work.
Yeah, I've been pretty scared too when this happened for first time to me. It is really weird behavior. Atleast it is working again.
wiilweer said:
Battery is completly drained. Charge it about half an hour and should work.
Click to expand...
Click to collapse
Yep, you're right. 20 minutes and the phone came alive.
Is it just me or did they completely miss this out in the manual? Could have been worth mentioning if you ask me...
/Daniel
i've had this too... is it ok to charge via a PC or does it have to be directly from the charger?
x10bravia said:
i've had this too... is it ok to charge via a PC or does it have to be directly from the charger?
Click to expand...
Click to collapse
I guess its the same but charging it via the usb will take more time to get it alive again
HELP
my phone can´t charge anyway.... i let it charging in the wall during all the morning and "nothing"... even a minimum led light...
so i connected to the usb in my pc and the led started blinking once in each three seconds...
blink + 1 + 2 + 3sec AND REPEAT
so... i let it in usb for maybe 40 minuts... and.... nothing again... nothing changed and the led continuous to blink at the same way.
so, i tried to plug again in the wall, and no led light, but suddently led blinked this way:
blink / blink / blink + 1 + 2sec and repeat three times so stops, no more lights, and it happend again if i tryied to power on the phone...
and now, nothing happens.... no lights... even i fi try to power on, even if i plug in the wall...
mini pro is dead.
i don´t know what to do
tried pressing home + power buttons for minuts and nothing
tried pressing back button for minuts and nothing
tried to connect to PC companium and nothing, no phone connected
tried using SEUS but it can´t connect to the phone as it has no battery charge
any ideas.... please?
and let me know... is this any issue from the ROM? i just installed CM7Mini V7... it´s the first time i had the battery drained... so i ask... if there is a way to awake my mini, will the same issue happen again ????? I can´t forget the battery draining?????
HEEEEEEEEEELLLLLPPPPP
3 blinks mean not enough battery energy to boot. Maybe your USB port is just brocken...
Try using FlashTool to flash a stock ROM to see if it works, because with SEUS first you have to connect your phone to be recognised and afteerwards updated or repaired. Maybe FlashTool is the solution...
I have made a post with instructions and links to flash with FlashTool. Just search for
2.1.1.A.0.6 GREEK .ftf
Another possible solution is what guys have mentioned above... To let it charge while it seem dead and it'll be alive in some minutes.
Sent from my U20i using XDA Premium App
Some custom rom wont charge while the X10 mini pro is turned off. So it needs to be on for charging. This is challange is its totaly dryed out
So never let it dry totaly out.
Emperor.dk said:
Some custom rom wont charge while the X10 mini pro is turned off. So it needs to be on for charging. This is challange is its totaly dryed out
So never let it dry totaly out.
Click to expand...
Click to collapse
(you probably meant no offline charging)
It really doesn't matter... I have tried almost every single ROM. And dryed the battery completelly, but I was always able to charge it.
Sent from my U20i using XDA Premium App
leajian said:
(you probably meant no offline charging)
It really doesn't matter... I have tried almost every single ROM. And dryed the battery completelly, but I was always able to charge it.
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
Yes...
Thanks
Thanks for the info. Pluggin the phone did the trick.
Help
azhhael said:
my phone can´t charge anyway.... i let it charging in the wall during all the morning and "nothing"... even a minimum led light...
so i connected to the usb in my pc and the led started blinking once in each three seconds...
blink + 1 + 2 + 3sec AND REPEAT
so... i let it in usb for maybe 40 minuts... and.... nothing again... nothing changed and the led continuous to blink at the same way.
so, i tried to plug again in the wall, and no led light, but suddently led blinked this way:
blink / blink / blink + 1 + 2sec and repeat three times so stops, no more lights, and it happend again if i tryied to power on the phone...
and now, nothing happens.... no lights... even i fi try to power on, even if i plug in the wall...
mini pro is dead.
i don´t know what to do
tried pressing home + power buttons for minuts and nothing
tried pressing back button for minuts and nothing
tried to connect to PC companium and nothing, no phone connected
tried using SEUS but it can´t connect to the phone as it has no battery charge
any ideas.... please?
and let me know... is this any issue from the ROM? i just installed CM7Mini V7... it´s the first time i had the battery drained... so i ask... if there is a way to awake my mini, will the same issue happen again ????? I can´t forget the battery draining?????
HEEEEEEEEEELLLLLPPPPP
Click to expand...
Click to collapse
is ur prob get solved pls tell me, im suffering from this now........ i charged my mob 15 hrs.... but still red light blinks.....!!! Help pls!!!
Raj Rohit said:
is ur prob get solved pls tell me, im suffering from this now........ i charged my mob 15 hrs.... but still red light blinks.....!!! Help pls!!!
Click to expand...
Click to collapse
I had today same problem. i was on my phone and battery was 100%. i have just disconnected from charging.. and after few minutes phone turns off and when I press power button nothing except 3 x red led flash. if I turn charger red led blinks. I let 1 hour to charge my phone and led was green but if I push power button nothing againg..no vibrate nothing. I pulled out battery few times and put back and finally phone turns on
also before i give my phone on charging I put my battery into sisters phone (i have x8 and she xperia mini st15i) and her phone turns on with that battery, i put back to my phone and it didnt turn on my phone. (I dont understand that) but after all my phone works now and Im happy
so try only charge for few hours and it should start also try put battery into another phone to see what is problem
w3rew0lf said:
I had today same problem. i was on my phone and battery was 100%. i have just disconnected from charging.. and after few minutes phone turns off and when I press power button nothing except 3 x red led flash. if I turn charger red led blinks. I let 1 hour to charge my phone and led was green but if I push power button nothing againg..no vibrate nothing. I pulled out battery few times and put back and finally phone turns on
also before i give my phone on charging I put my battery into sisters phone (i have x8 and she xperia mini st15i) and her phone turns on with that battery, i put back to my phone and it didnt turn on my phone. (I dont understand that) but after all my phone works now and Im happy
so try only charge for few hours and it should start also try put battery into another phone to see what is problem
Click to expand...
Click to collapse
have you found a solution?
rfg13 said:
have you found a solution?
Click to expand...
Click to collapse
I dont know what was wrong but phone now works like a charm. I dont have that phone but my friend does and it didn't happened again
I got same problem and tried charging my phone but it didn't work. Please suggest me what else I can do.
Not sure if this did the trick, but after I had the battery out for about 5 minutes, it started after inserting back.
wiilweer said:
Battery is completly drained. Charge it about half an hour and should work.
Click to expand...
Click to collapse
I have a same problem now. Even when I have my Xperia Z on charge now , the red LED doesn't light up. I hope this works for me.
Hi,
I have an Xperia X10 and it was working fine until last night. I had put it on charge overnight but when I woke up in the morning, I could see RED LED blinking and the phone will not boot up (re-start).
I have tried many suggestions found on the blog (taking out the batter, putting the phone on charge and then putting back the battery). This has not helped and my phone is till dead.
Any clue/suggestions on how to get this issue resolved?
Thanks!
Would try different charger / charger cable or charging from pc sounds like flat battery more than anything else
Kieron
sent from a x10i multitouch using a different rom every day
Sounds like a flat battery.
Could be faulty battery/charger. Try different ones.
Sure, will try out your suggestions and use a new battery.
Does any one know what it means when the RED LED flashes for continuously three times when the phone is getting charged via the main (and not USB)?
The red flashing led pattern does not indicate more than something is not working accordingly so there's no way to tell from this exactly what has caused this.
I would try a different charger if possible and if this does not help, bring the phone to the store for a warranty repair. Hope it can be sorted easily and quick.
-Markus
Sony Ericsson Answers Team
Markus-SEAnswers said:
The red flashing led pattern does not indicate more than something is not working accordingly so there's no way to tell from this exactly what has caused this.
I would try a different charger if possible and if this does not help, bring the phone to the store for a warranty repair. Hope it can be sorted easily and quick.
-Markus
Sony Ericsson Answers Team
Click to expand...
Click to collapse
If you're from SE why are you on freakin XDA?
i found it was my charger that was the problem. i would leave it for ages and never recieve charge but if i shifted the cable or wiggled it a bit the charge would start
red flashing light means its on power but recieving enough charge to switch on i think. like when you try to turn your phone on when the batteery is completely flat
Or simply a dead, malfunctioning battery.
Had one of those battery, and it did that when charged..
PlayGunsta said:
If you're from SE why are you on freakin XDA?
Click to expand...
Click to collapse
He's scouting to see if the bootloader has been compromised! Lol.
Sent from my Delorean using a flux capacitor!
Red light issue happened to me once.i fixed it by leaving the cable in(while charging) and removing the battery. I then put the battery back in and green light!
Sent from my X10i using XDA App
Could be a broken USB port. It's a fairly common problem.
I just had the same problem with my X10. I left it charging overnight and now the phone won't turn on. All I get are 3 red lights blinking when I try to turn it on. I already tried a different charger and still no luck. Once when I plugged it into my PC I got it somehow to turn on, the deviced booted up but when it got into the initial screen it turned off
Wasn't the phone supposed to turn on even without the battery? I mean, can't I plug the charger and try to turn on my phone or it will only work with a battery?
Last night when i slept all was ok with nearly 60 percent but in the morning my phone was dead. It is not booting by any key. The red light is also not blinking.I tried to turn on by pressing both the power and home key,but nothing working.I connected my phone for charging two to three hours but not a single blink... Neither flashtool nor seus are recognising my phone when i connected my phone to pc. I was on minicm 9 and naa ics kernel.Plz help me to sort this out.....
playcool69 said:
Last night when i slept all was ok with nearly 60 percent but in the morning my phone was dead. It is not booting by any key. The red light is also not blinking.I tried to turn on by pressing both the power and home key,but nothing working.I connected my phone for charging two to three hours but not a single blink... Neither flashtool nor seus are recognising my phone when i connected my phone to pc. I was on minicm 9 and naa ics kernel.Plz help me to sort this out.....
Click to expand...
Click to collapse
Try to take off the battery and retry charging
There may be a problem in your charger micro USB jack or the phone port, so try removing and inserting one or two times. This happened to me too many times.
Normally after a complete drain, sometimes the red light starts blinking after few seconds/minutes sometimes & then onwards there is a pattern of blinking red & then it starts showing the battery symbol when the LED starts from red.
The blinking red may be for ever, it may indicate a cable/micro USB pin/port problem. But as a coincidence I found it on miniCM10+nAa jb2 & I have never seen such on miniCM 7x. No known such problem due to kernel/ROM is yet proved!
If nothing works, charge the battery with an external charger available in the market and solve the problem & charge again!
:good:If it works press thanks!!!
Photoneutron said:
Try to take off the battery and retry charging
There may be a problem in your charger micro USB jack or the phone port, so try removing and inserting one or two times. This happened to me too many times.
Normally after a complete drain, sometimes the red light starts blinking after few seconds/minutes sometimes & then onwards there is a pattern of blinking red & then it starts showing the battery symbol when the LED starts from red.
The blinking red may be for ever, it may indicate a cable/micro USB pin/port problem. But as a coincidence I found it on miniCM10+nAa jb2 & I have never seen such on miniCM 7x. No known such problem due to kernel/ROM is yet proved!
If nothing works, charge the battery with an external charger available in the market and solve the problem & charge again!
:good:If it works press thanks!!!
Click to expand...
Click to collapse
I cant pull out the battery in my 2010 mini. I removed the white battery wire near camera and
tried to charge it but its very difficult.. After 10 mins of charging in my hand. There wasnt a single red blink.I touched the terminal on my tounge and the current sense was pretty good.. Do i need to replace the battery.
a few days ago, I installed the CM9.1 v6 from scritch's thread here:
http://forum.xda-developers.com/showthread.php?t=1987130
at first, i used the kernel v5 and it was working fine. 3 days ago, i downloaded and flashed the v6 kernel. 2 days ago, I left my phone charging at 47% for an hour or so, when i came back, i saw a black screen and the screen as well as battery was extremely hot(around 35-40 degrees). I tried switching it on but it showed only the kernel logo 'X10 never dies' and then again black screen after flashing blue led 3 times. I waited for 5 minutes. again it got extremely hot. I pulled out the battery and kept it aside for 5 minutes to cool down. after that i tried several times to switch it on but every time i got the same problem and i had to remove the battery to cool it down. at night, i kept the battery out from the phone only. I thought it would work in the morning. But yesterday morning I couldn't even switch it on. I connected it to the charger(an original SE charger with original USB cable). After connecting to the charger also, it heated up instantly but there was no display on the screen and it wasn't charging. I have been trying to charge it since yesterday(using charger and connecting with pc also) but it gets EXTREMELY HOT every time without charging or switching on. Please help me!
What should I do???
coolguy420 said:
a few days ago, I installed the CM9.1 v6 from scritch's thread here:
http://forum.xda-developers.com/showthread.php?t=1987130
at first, i used the kernel v5 and it was working fine. 3 days ago, i downloaded and flashed the v6 kernel. 2 days ago, I left my phone charging at 47% for an hour or so, when i came back, i saw a black screen and the screen as well as battery was extremely hot(around 35-40 degrees). I tried switching it on but it showed only the kernel logo 'X10 never dies' and then again black screen after flashing blue led 3 times. I waited for 5 minutes. again it got extremely hot. I pulled out the battery and kept it aside for 5 minutes to cool down. after that i tried several times to switch it on but every time i got the same problem and i had to remove the battery to cool it down. at night, i kept the battery out from the phone only. I thought it would work in the morning. But yesterday morning I couldn't even switch it on. I connected it to the charger(an original SE charger with original USB cable). After connecting to the charger also, it heated up instantly but there was no display on the screen and it wasn't charging. I have been trying to charge it since yesterday(using charger and connecting with pc also) but it gets EXTREMELY HOT every time without charging or switching on. Please help me!
What should I do???
Click to expand...
Click to collapse
May your device got defect with current rom. Load different rom. Or back to official firmware
Sent from my SO-01C using xda app-developers app
bergkaiser said:
May your device got defect with current rom. Load different rom. Or back to official firmware
Sent from my SO-01C using xda app-developers app
Click to expand...
Click to collapse
the phone is neither switching on nor charging.....I cannot connect it to computer also.....I cant put it in flash mode for connecting to flashtool....nothing is happening except it starts heating gradually after connecting to charger.....((
Tips to connect your phone in flashmode if there is no green light when you are trying to connect it to flashtool:
1. Press back button while plugging it into your computer USB port.
2. Do not release back button and press power button once while you are pressing back button.
3. Green LED light should appear.
4. Release back button when your phone is detected in flashtool.
(MAKE SURE THAT YOUR BATTERY IS FULLY CHARGED)
jai554 said:
Tips to connect your phone in flashmode if there is no green light when you are trying to connect it to flashtool:
1. Press back button while plugging it into your computer USB port.
2. Do not release back button and press power button once while you are pressing back button.
3. Green LED light should appear.
4. Release back button when your phone is detected in flashtool.
(MAKE SURE THAT YOUR BATTERY IS FULLY CHARGED)
Click to expand...
Click to collapse
I charged the battery fully using an external battery charger. When i connect it to flashtool, the green led glows but as soon as i select the file to flash, the led comes off and it starts heating again. I tried using Sony Update Service also to repair it, but as I click on next after connecting it, the same happens, green led goes off and it starts heating up.
Please SOMEBODY help me!!!!
I downloaded the Stock firmware from the following thread:
http://forum.xda-developers.com/showthread.php?t=1749426
I downloaded the India Generic Kit 1237-0692. I tried flashing it through flashtool but between 14-15%, the flash mode just goes off and the phone gets disconnected. Now, the condition is worse than before. Earlier, I was able to switch the phone on and see the 'Xperia Never Dies' screen from scritch's kernel. But now, nothing is there. Everytime I try to flash generic firmware either thru flashtool or SEUS, the green led goes off and it gets disconnected.
PLEASE SOMEONE HELP ME FIX MY PHONE. I HAVE NO OTHER PHONE TO USE.
I dont really understand what your problem is
---------- Post added at 11:22 PM ---------- Previous post was at 11:18 PM ----------
coolguy420 said:
I charged the battery fully using an external battery charger. When i connect it to flashtool, the green led glows but as soon as i select the file to flash, the led comes off and it starts heating again. I tried using Sony Update Service also to repair it, but as I click on next after connecting it, the same happens, green led goes off and it starts heating up.
Click to expand...
Click to collapse
You should select the FTF file first then you can connect your phone when the flashtool ask you to connect your phone...
your steps are wrong... the same thing goes to me too when i connect the phone before i select my desired firmware file...
please attach your flashtool log
Here are some suggestions my friends note had a similar problem:
1.Try using a new battery maybe the battery fails as it spoilt and can't handle strain(my friend had this problem)
2.Since your phone won't do anything u can try go to a store and say I don't know what happened and ask for help
3.Did you try entering recovery and flashing a Rom or nandroid backup. Your question is not very clear.
Please let us all know what u did to solve the issue.
Sent using xda premium.
Hi everyone,
Some time ago my Xperia X10 suddenly got some error messages and i decided to just remove the battery and repalce it.
After i did this the phone wouldnt go further than the Sony Ericsson logo, so i pulled out the battery again.
After some time it wouldnt start up at all anymore.
I actually gave up hope untill a few days pack i decided to try connecting it to the pc once more.
when i tried to start in in boot mode (back button + connecting the usb) a red led started blinking with a 1 second interval.
So i tought if the led blinks there is life in it and i can fix it.
I fooled around with it a bit (note that my pc never really found the phone) and tried charging it in the wall socket.
When i try to start boot mode while connecting it to a wall socket a green led starts burning.
So i tought it might have been the battery, i ordered a new one wich came in today.
Sadly no help since the green light imediatly shuts down if i put in the battery wich has been charging for about 5 hours now.
Can anyone please tell me whats going on and if its fixable?
If you need anyomore info please ask because im sure i forgot some important stuff.
Thanks in advance.
are tisawla
I'm just trying out some more and found that:
-its not boot mode but just the green charging light comming up when i connect the phone to a wall socket without a battery
-there is no green light (so no charging?) when there is a battery in the phone
-with or without battery there is no green light when i connect it to my pc's usb (not enough power supplied?)