Last night when i slept all was ok with nearly 60 percent but in the morning my phone was dead. It is not booting by any key. The red light is also not blinking.I tried to turn on by pressing both the power and home key,but nothing working.I connected my phone for charging two to three hours but not a single blink... Neither flashtool nor seus are recognising my phone when i connected my phone to pc. I was on minicm 9 and naa ics kernel.Plz help me to sort this out.....
playcool69 said:
Last night when i slept all was ok with nearly 60 percent but in the morning my phone was dead. It is not booting by any key. The red light is also not blinking.I tried to turn on by pressing both the power and home key,but nothing working.I connected my phone for charging two to three hours but not a single blink... Neither flashtool nor seus are recognising my phone when i connected my phone to pc. I was on minicm 9 and naa ics kernel.Plz help me to sort this out.....
Click to expand...
Click to collapse
Try to take off the battery and retry charging
There may be a problem in your charger micro USB jack or the phone port, so try removing and inserting one or two times. This happened to me too many times.
Normally after a complete drain, sometimes the red light starts blinking after few seconds/minutes sometimes & then onwards there is a pattern of blinking red & then it starts showing the battery symbol when the LED starts from red.
The blinking red may be for ever, it may indicate a cable/micro USB pin/port problem. But as a coincidence I found it on miniCM10+nAa jb2 & I have never seen such on miniCM 7x. No known such problem due to kernel/ROM is yet proved!
If nothing works, charge the battery with an external charger available in the market and solve the problem & charge again!
:good:If it works press thanks!!!
Photoneutron said:
Try to take off the battery and retry charging
There may be a problem in your charger micro USB jack or the phone port, so try removing and inserting one or two times. This happened to me too many times.
Normally after a complete drain, sometimes the red light starts blinking after few seconds/minutes sometimes & then onwards there is a pattern of blinking red & then it starts showing the battery symbol when the LED starts from red.
The blinking red may be for ever, it may indicate a cable/micro USB pin/port problem. But as a coincidence I found it on miniCM10+nAa jb2 & I have never seen such on miniCM 7x. No known such problem due to kernel/ROM is yet proved!
If nothing works, charge the battery with an external charger available in the market and solve the problem & charge again!
:good:If it works press thanks!!!
Click to expand...
Click to collapse
I cant pull out the battery in my 2010 mini. I removed the white battery wire near camera and
tried to charge it but its very difficult.. After 10 mins of charging in my hand. There wasnt a single red blink.I touched the terminal on my tounge and the current sense was pretty good.. Do i need to replace the battery.
Related
Hi,
pls. i have one problem.
Sometimes my device dont charge on usb cable. Sometimes yes and sometimes no. Sometimes it start OK (orange led is on) but after time (e.g. - 25% battery) it stops and led diode start blink (green, orange, green, orange...)
Sometimes it charge ok till battery is full.
Pls. i tried it search here and with google, but i was not succsesfull.
what i tried:
- hard reset
- many of roms
and of course I have set, charging when is usb plugged.
Any suggestions?
thx for help
that happened to me when i was using a fake replacement battery. if you have one too, it's most certainly the issue. if not, try using a friend's HD2 to charge it and see if the same thing happens.
also, try upgrading your radio
yes i have replacement battery - not original. Yesterday i had this fake and the problems appears and now i have original and the problem has gone.
It seems, thats this is the problem.
I will test it again.
thx m8
Hi all.
My phone seems to be broken. It's almost completely dead. When I press the power button the led blinks red three times. When I connect it to power it blinks red once every other second. Anyone knows what this red blinking means? I'm sure it's a code for something...
I've tried removing sd and sim and also disconnecting and connecting the battery cable with no result. Anything else I could try or is it just a matter of sending it away and being without phone for some weeks?
/Daniel
Battery is completly drained. Charge it about half an hour and should work.
Yeah, I've been pretty scared too when this happened for first time to me. It is really weird behavior. Atleast it is working again.
wiilweer said:
Battery is completly drained. Charge it about half an hour and should work.
Click to expand...
Click to collapse
Yep, you're right. 20 minutes and the phone came alive.
Is it just me or did they completely miss this out in the manual? Could have been worth mentioning if you ask me...
/Daniel
i've had this too... is it ok to charge via a PC or does it have to be directly from the charger?
x10bravia said:
i've had this too... is it ok to charge via a PC or does it have to be directly from the charger?
Click to expand...
Click to collapse
I guess its the same but charging it via the usb will take more time to get it alive again
HELP
my phone can´t charge anyway.... i let it charging in the wall during all the morning and "nothing"... even a minimum led light...
so i connected to the usb in my pc and the led started blinking once in each three seconds...
blink + 1 + 2 + 3sec AND REPEAT
so... i let it in usb for maybe 40 minuts... and.... nothing again... nothing changed and the led continuous to blink at the same way.
so, i tried to plug again in the wall, and no led light, but suddently led blinked this way:
blink / blink / blink + 1 + 2sec and repeat three times so stops, no more lights, and it happend again if i tryied to power on the phone...
and now, nothing happens.... no lights... even i fi try to power on, even if i plug in the wall...
mini pro is dead.
i don´t know what to do
tried pressing home + power buttons for minuts and nothing
tried pressing back button for minuts and nothing
tried to connect to PC companium and nothing, no phone connected
tried using SEUS but it can´t connect to the phone as it has no battery charge
any ideas.... please?
and let me know... is this any issue from the ROM? i just installed CM7Mini V7... it´s the first time i had the battery drained... so i ask... if there is a way to awake my mini, will the same issue happen again ????? I can´t forget the battery draining?????
HEEEEEEEEEELLLLLPPPPP
3 blinks mean not enough battery energy to boot. Maybe your USB port is just brocken...
Try using FlashTool to flash a stock ROM to see if it works, because with SEUS first you have to connect your phone to be recognised and afteerwards updated or repaired. Maybe FlashTool is the solution...
I have made a post with instructions and links to flash with FlashTool. Just search for
2.1.1.A.0.6 GREEK .ftf
Another possible solution is what guys have mentioned above... To let it charge while it seem dead and it'll be alive in some minutes.
Sent from my U20i using XDA Premium App
Some custom rom wont charge while the X10 mini pro is turned off. So it needs to be on for charging. This is challange is its totaly dryed out
So never let it dry totaly out.
Emperor.dk said:
Some custom rom wont charge while the X10 mini pro is turned off. So it needs to be on for charging. This is challange is its totaly dryed out
So never let it dry totaly out.
Click to expand...
Click to collapse
(you probably meant no offline charging)
It really doesn't matter... I have tried almost every single ROM. And dryed the battery completelly, but I was always able to charge it.
Sent from my U20i using XDA Premium App
leajian said:
(you probably meant no offline charging)
It really doesn't matter... I have tried almost every single ROM. And dryed the battery completelly, but I was always able to charge it.
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
Yes...
Thanks
Thanks for the info. Pluggin the phone did the trick.
Help
azhhael said:
my phone can´t charge anyway.... i let it charging in the wall during all the morning and "nothing"... even a minimum led light...
so i connected to the usb in my pc and the led started blinking once in each three seconds...
blink + 1 + 2 + 3sec AND REPEAT
so... i let it in usb for maybe 40 minuts... and.... nothing again... nothing changed and the led continuous to blink at the same way.
so, i tried to plug again in the wall, and no led light, but suddently led blinked this way:
blink / blink / blink + 1 + 2sec and repeat three times so stops, no more lights, and it happend again if i tryied to power on the phone...
and now, nothing happens.... no lights... even i fi try to power on, even if i plug in the wall...
mini pro is dead.
i don´t know what to do
tried pressing home + power buttons for minuts and nothing
tried pressing back button for minuts and nothing
tried to connect to PC companium and nothing, no phone connected
tried using SEUS but it can´t connect to the phone as it has no battery charge
any ideas.... please?
and let me know... is this any issue from the ROM? i just installed CM7Mini V7... it´s the first time i had the battery drained... so i ask... if there is a way to awake my mini, will the same issue happen again ????? I can´t forget the battery draining?????
HEEEEEEEEEELLLLLPPPPP
Click to expand...
Click to collapse
is ur prob get solved pls tell me, im suffering from this now........ i charged my mob 15 hrs.... but still red light blinks.....!!! Help pls!!!
Raj Rohit said:
is ur prob get solved pls tell me, im suffering from this now........ i charged my mob 15 hrs.... but still red light blinks.....!!! Help pls!!!
Click to expand...
Click to collapse
I had today same problem. i was on my phone and battery was 100%. i have just disconnected from charging.. and after few minutes phone turns off and when I press power button nothing except 3 x red led flash. if I turn charger red led blinks. I let 1 hour to charge my phone and led was green but if I push power button nothing againg..no vibrate nothing. I pulled out battery few times and put back and finally phone turns on
also before i give my phone on charging I put my battery into sisters phone (i have x8 and she xperia mini st15i) and her phone turns on with that battery, i put back to my phone and it didnt turn on my phone. (I dont understand that) but after all my phone works now and Im happy
so try only charge for few hours and it should start also try put battery into another phone to see what is problem
w3rew0lf said:
I had today same problem. i was on my phone and battery was 100%. i have just disconnected from charging.. and after few minutes phone turns off and when I press power button nothing except 3 x red led flash. if I turn charger red led blinks. I let 1 hour to charge my phone and led was green but if I push power button nothing againg..no vibrate nothing. I pulled out battery few times and put back and finally phone turns on
also before i give my phone on charging I put my battery into sisters phone (i have x8 and she xperia mini st15i) and her phone turns on with that battery, i put back to my phone and it didnt turn on my phone. (I dont understand that) but after all my phone works now and Im happy
so try only charge for few hours and it should start also try put battery into another phone to see what is problem
Click to expand...
Click to collapse
have you found a solution?
rfg13 said:
have you found a solution?
Click to expand...
Click to collapse
I dont know what was wrong but phone now works like a charm. I dont have that phone but my friend does and it didn't happened again
I got same problem and tried charging my phone but it didn't work. Please suggest me what else I can do.
Not sure if this did the trick, but after I had the battery out for about 5 minutes, it started after inserting back.
wiilweer said:
Battery is completly drained. Charge it about half an hour and should work.
Click to expand...
Click to collapse
I have a same problem now. Even when I have my Xperia Z on charge now , the red LED doesn't light up. I hope this works for me.
Hi Guys I have spent past 5 days searching google watching videos on youtube and I still have issue with my Ericson Xperia X10
I have downloaded Flash tool and that stuck on reading device part and does not go any more.
I have downloaded updates service but it cuts of after url downloaded the software need it, and when it tries to update the phone it self.it says fail I tried this few times.still same thing.
I have downloaded Sony PC Companion same thing it will not update.
I tried videos on youtube from plugin phone in to main charger not the PC and sticking down the on button still nothing happens
I also tried pressing Volume and on button same time still nothing happens.
if I plug the phone in main charger it blinks with red light if I try and turn it on it will blink 3 times with red light and nothing happens
on some occasions it will have steady green light for about 5 minutes and then it just goes off and no green light and no blinking.
This is really frustrating for me and any help would be greatly appreciated.
I have Sony Ericsson xperia x10 ( white version ) please advice.
Thanks guys.
The red flashing LED generally indicates the battery is completely depleted.
Plug the phone into a wall charger and leave it for a few hours, after which (hopefully) you should see an solid red/orange light as it charges.
If it does start to charge when the red LED stops flashing and you get a solid red/orange LED I would suggest to charge it for a good 12hrs+
If may take over an hour before the red flashing LED stops and turns a solid red/orange depending on battery state.
For best charging(and if you still have it) use the original Sony EP800 charger with Sony EC600L cable that came with the phone, as this 'pumps' the largest amount of Amps into the battery and charges quicker.
If you don't get a solid red/orange LED on the phone after approx 3-4hrs charging, then you may need to look at purchasing a new battery.
Dr Goodvibes said:
The red flashing LED generally indicates the battery is completely depleted.
Plug the phone into a wall charger and leave it for a few hours, after which (hopefully) you should see an solid red/orange light as it charges.
If it does start to charge when the red LED stops flashing and you get a solid red/orange LED I would suggest to charge it for a good 12hrs+
If may take over an hour before the red flashing LED stops and turns a solid red/orange depending on battery state.
For best charging(and if you still have it) use the original Sony EP800 charger with Sony EC600L cable that came with the phone, as this 'pumps' the largest amount of Amps into the battery and charges quicker.
If you don't get a solid red/orange LED on the phone after approx 3-4hrs charging, then you may need to look at purchasing a new battery.
Click to expand...
Click to collapse
Hi thank you for your reply
My issue is this when I plug it in to main charger and not PC solid green light comes on for about 2 minutes and then nothing no blinking lights or anything any ideas or suggestions on this please?
oOSTAROo said:
Hi thank you for your reply
My issue is this when I plug it in to main charger and not PC solid green light comes on for about 2 minutes and then nothing no blinking lights or anything any ideas or suggestions on this please?
Click to expand...
Click to collapse
Try removing the battery from the phone and leaving it out of the phone for 2-3hrs.
The green LED indicates it's in 'Flash mode' and thinks it's waiting to start/complete a firmware install.
I'm guessing you don't have a Sony EP800 charger and Sony EC600L cable and that you using some other combination of charger/cable.
[Update]
After the battery has been removed from the phone (overnight would be good) then insert the battery back in the phone and see if you get a solid red/orange/green charging light and if so, charge for 12hrs+
The reason I ask about the Sony EP800 charger and cable, is that I know it provides over 900mAh draw which means the phone 'should' know it's a AC wall charger, but many other charger/cable combinations only provide a USB ~500mAh draw which could prompt the phone to think it's still attached to a PC and thus remain in it's last connected state. i.e. Flash mode.
Just an idea.
Dr Goodvibes said:
Try removing the battery from the phone and leaving it out of the phone for 2-3hrs.
The green LED indicates it's in 'Flash mode' and thinks it's waiting to start/complete a firmware install.
I'm guessing you don't have a Sony EP800 charger and Sony EC600L cable and that you using some other combination of charger/cable.
Click to expand...
Click to collapse
Thank you for your reply again this is the charger I have
ebay.co.uk/itm/Genuine-Mains-Home-Micro-USB-Walls-Charger-For-Sony-Ericsson-Xperia-X10i-UK-/140647228895
It is genuine sony ericsson charger usb can plug in to charger it self or in PC as seen on above link. I have removed battery now and will wait for few hours and will try again as you advised above.
Thank you again for your prompt reply will update this thread tomorrow see how it goes. Have a good night.
oOSTAROo said:
Hi Guys I have spent past 5 days searching google watching videos on youtube and I still have issue with my Ericson Xperia X10
I have downloaded Flash tool and that stuck on reading device part and does not go any more.
I have downloaded updates service but it cuts of after url downloaded the software need it, and when it tries to update the phone it self.it says fail I tried this few times.still same thing.
I have downloaded Sony PC Companion same thing it will not update.
I tried videos on youtube from plugin phone in to main charger not the PC and sticking down the on button still nothing happens
I also tried pressing Volume and on button same time still nothing happens.
if I plug the phone in main charger it blinks with red light if I try and turn it on it will blink 3 times with red light and nothing happens
on some occasions it will have steady green light for about 5 minutes and then it just goes off and no green light and no blinking.
This is really frustrating for me and any help would be greatly appreciated.
I have Sony Ericsson xperia x10 ( white version ) please advice.
Thanks guys.
Click to expand...
Click to collapse
Hi did you install the driver's for flashtool from the folder?
If your SEUS file failed during download then re-download it and go back to stock.
It will update itself and restart be patient :good:
After the install is finished Sony Update Service start's up then follow the on screen instruction's. Agree to license - click Start - Choose x10 - press next etc
Just Follow onscreen Instructions
If your phone has trouble with back key and plug in usb,
Then leave the usb plugged into both phone and computer with your battery out!
Then hold back key and put your battery in :good:
doodownunda said:
Hi did you install the driver's for flashtool from the folder?
If your SEUS file failed during download then re-download it and go back to stock.
It will update itself and restart be patient :good:
After the install is finished Sony Update Service start's up then follow the on screen instruction's. Agree to license - click Start - Choose x10 - press next etc
Just Follow onscreen Instructions
If your phone has trouble with back key and plug in usb,
Then leave the usb plugged into both phone and computer with your battery out!
Then hold back key and put your battery in :good:
Click to expand...
Click to collapse
After trying everything as suggested still have issues so I have ordered original battery for my xperia x10 when it arrives I will try again see if I can turn my phone on. Thanks for all the great suggestions
Reflash 2.3.3 firmware using flashtool
im getting solid Red Light when i connected to power. no charging not even recondnice by the computer.. What can i do to power on the phone..
i did hard reset too nothing happend....
i read some article about red light and some says to return to sony store and some says to unplug the battery and reconnect ... i dnt have warrenty to send it to sony.....so " if i change the battery does it works" ?
Sometimes it works with replacing the battery. Sometimes you need a new mainboard ( about 100 $)
I don't know if these "test buttons" works. Then your phone will be recognzied as S1Device and you could use trying S1tool (but i think it does not support Z2 )
Same problem
Hello,
I've got the same problem. No response at all with any button combination or the red reset button.
If I connect the usb cable to charger or PC red LED turns on but nothing else. The PC doesn't recognize it, not even if I connect it with volume down pressed. I opened it and disconnected the battery. With the battery disconnected it has the same behaviour, only red light if connected.
Any ideas of what I could try?
I wouldn't expect a dead battery causing this. I mean, if the phone can get the power from the charger then it should turn on even with the battery disconnected right?
I was thinking to charge it for two days and see if anything happens, just in case. Otherwise I will need to think on how to discharge the battery manually and see what happens.
I don't to buy a new battery unless I am sure that will help...
arretxe said:
Hello,
.. With the battery disconnected it has the same behaviour, only red light if connected.
...
Click to expand...
Click to collapse
What happens if you disconnect the battery, put the charger cable in the phone and then hold the power button and volume up button for like 5 seconds.
Do you get the battery logo on the display then?
No... Nothing at all happens
arretxe said:
No... Nothing at all happens
Click to expand...
Click to collapse
Is it the original loader (Sony, 1500mah) + sony charging Cable?
I have chargers laying around everywhere, and I noticed that sometimes the phone did nothing while using samsung chargers 750mah).
When I put my phone in the charger the light turns red. Nothing on the screen.
When I take out the charger the light stays red for a long time.
But when it is off, and I take the battery out and then put it on the charger (without the battery), then the display shows a battery logo.
My phone discharged completely to 0% and now it won't charge at all. I don't think the battery is working, but I can't ge the phone to respond.
When I connect it to the charger, the low battery screen turns on, then the phone begins booting, but as soon as the SONY logo flashes the phone stops responding. No red light is shown indicating charging.
I've tried holding the yellow off button near the sim card but don't get a response. Just whenever I plug it out and back in the same screens repeat.
I installed Lineage OS a month and a half ago and wonder if that might be the cause - with my last Suzuran I had Lineage OS for 3 months before the battery died (three red lights).
If anyone knows what the problem could be I'd appreciate some advice. Thanks.
Hello,
Try removing the SD card and try charging it again. Also use a new good charging cable (had a lot of problems myself)