Well the title says it all. Its a nice feature for app developers. I know there are apps in market ... But it would be nice to have native support in the ROM .. and also when ADB over network is enabled, there should be quick tile available too .. Its neat, clean and goes with the current philosophy of the PA
A quick tile isn't needed, but adb over network should be included. I thought it was an aosp default feature
It isn't in AOSP
need it
We need this feature, it is very useful. :good:
+1
ciao99 said:
A quick tile isn't needed, but adb over network should be included. I thought it was an aosp default feature
Click to expand...
Click to collapse
A quick tile might not be needed, but I think that would provide the best access to it. Seeing as you'd mostly just be toggling it on and off, even if it's part of the network dual tile, it would be really convenient.
jabza said:
A quick tile might not be needed, but I think that would provide the best access to it. Seeing as you'd mostly just be toggling it on and off, even if it's part of the network dual tile, it would be really convenient.
Click to expand...
Click to collapse
right, i'm using it on cm and it's great! hope to see it on PA also
Related
I really miss the simple pull down from jellybean 4.1.2 where I just had to have on pull down and I could easily enable or disable airplane mode, wifi, gps.
Now I have to pull down and hit settings to have those toggles enabled or disabled. I find that one extra step annoying but can't find an option in most AOKP roms to disable pressing settings to get to my toggles. Is there a way to change this?
zetsui said:
I really miss the simple pull down from jellybean 4.1.2 where I just had to have on pull down and I could easily enable or disable airplane mode, wifi, gps.
Now I have to pull down and hit settings to have those toggles enabled or disabled. I find that one extra step annoying but can't find an option in most AOKP roms to disable pressing settings to get to my toggles. Is there a way to change this?
Click to expand...
Click to collapse
It must be there in display settings. If not just get the "notification toggle" from play store.
Does what ya need and you can chose which toggles ya need.
LIFE! It's what you make out of it!
Swipe down on status bar with two fingers. You'll go directly to quick settings. Also both CM and AOKP have a setting where you can configure swiping down on the left and right sides to take you directly to notifications or quick settings. For example, swipe down on left side brings up notifications and swipe down on right side automatically brings up quick settings. And I think there's a setting to directly display quick settings if there are no notifications wherever you swipe. CM also still includes the old style power widget at the top of the notification bar. If you want it, you just have to enable it in settings. So you see, there are many ways you can make using the quick settings a *really* quick and straightforward process. I find the quick toggles to be better than the old style toggles because I get to it in one step and everything shows on one screen (by increasing the number of toggles per row). No extra scrolling step like with the horizontal toggles. But some toggles such as screen timeout, screen lock etc aren't present in quick settings, so I use a combination of quick settings for all the usual toggles and the horizontal old toggles for the ones which aren't available.
Sent from my Desire HD using xda premium
Oh I missed to note that he was talking about 4.2
LIFE! It's not in your hands. But Living it to the best is
sashank said:
Swipe down on status bar with two fingers. You'll go directly to quick settings. Also both CM and AOKP have a setting where you can configure swiping down on the left and right sides to take you directly to notifications or quick settings. For example, swipe down on left side brings up notifications and swipe down on right side automatically brings up quick settings. And I think there's a setting to directly display quick settings if there are no notifications wherever you swipe. CM also still includes the old style power widget at the top of the notification bar. If you want it, you just have to enable it in settings. So you see, there are many ways you can make using the quick settings a *really* quick and straightforward process. I find the quick toggles to be better than the old style toggles because I get to it in one step and everything shows on one screen (by increasing the number of toggles per row). No extra scrolling step like with the horizontal toggles. But some toggles such as screen timeout, screen lock etc aren't present in quick settings, so I use a combination of quick settings for all the usual toggles and the horizontal old toggles for the ones which aren't available.
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
Thanks. Currently I'm still on my 4.1.2 TWRP backup but am trying to transition to 4.2. A lot of features missing in a lot of custom roms and Gapps. Ie photosphere, poor battery economy due to a host of issues (ie unresolved wakelocks) that kind of doesn't make the switch worth it for me yet.
Photosphere will never be included in AOSP ROMs even for Nexus devices because it's not part of the AOSP camera source code. It requires a proprietary Google version of the camera copied from Nexus devices along with proprietary library files. Reason is it uses street view technology and that's Google's proprietary technology, not open source. The Google camera also includes Picasa album sync, which isn't present in the AOSP camera/gallery code because it is proprietary too.
So if you want photosphere, you'll have to find Gapps that include the proprietary camera and libs or a flashable zip of only those parts and flash them to your phone. The standard Gapps package includes a check to flash these parts to Nexus devices automatically, although you should remember that flashing the closed source GalleryGoogle.apk will remove any customizations made by CM, AOKP etc to the camera.
Also, regarding battery, since codefireX SR5 many people have been reporting great battery life using the recommended settings (interactive gov, SIO scheduler, 149-1024/1200 Mhz). Synergye made some changes to increase battery life, and it's showing in the reports of users. People who are still experiencing average battery life with this ROM most probably have old batteries (like me) or some rogue apps installed. New batteries make a world of difference.
Sent from my Desire HD using xda premium
sashank said:
Photosphere will never be included in AOSP ROMs even for Nexus devices because it's not part of the AOSP camera source code. It requires a proprietary Google version of the camera copied from Nexus devices along with proprietary library files. Reason is it uses street view technology and that's Google's proprietary technology, not open source. The Google camera also includes Picasa album sync, which isn't present in the AOSP camera/gallery code because it is proprietary too.
So if you want photosphere, you'll have to find Gapps that include the proprietary camera and libs or a flashable zip of only those parts and flash them to your phone. The standard Gapps package includes a check to flash these parts to Nexus devices automatically, although you should remember that flashing the closed source GalleryGoogle.apk will remove any customizations made by CM, AOKP etc to the camera.
Also, regarding battery, since codefireX SR5 many people have been reporting great battery life using the recommended settings (interactive gov, SIO scheduler, 149-1024/1200 Mhz). Synergye made some changes to increase battery life, and it's showing in the reports of users. People who are still experiencing average battery life with this ROM most probably have old batteries (like me) or some rogue apps installed. New batteries make a world of difference.
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
Short concise to the point and educational. A lot of it I alreadyd did know except for why the coding wasn't present. I am good on wakelocks etc (see my signature). Thanks so much. Bohoth shukria bhai!
zetsui said:
Bohoth shukria bhai!
Click to expand...
Click to collapse
Haha
So I searched all over the net and I cant find the answers I was looking for.
I have a few questions about the features on the 4.4 rom.
1. Where are the hybrid options?
2. Why are there fewer battery icons?
3. How to add new pannels?
Also deleting the last icon removes that whole pannel instead of leaving it blank.
Other than that rom is smooth as butter!!
1.Not available, since they follow PA(paranoid android) to release hybrid for pa 4.4 so they can test it on pac 4.4 and merge it..
2.I don't know why are there less battery icons but it can be a work-in-progress since the ROM itself is work-in-progress and not complete, you can find new features here: http://review.pac-rom.com/
3. New pannels? I hope you mean new tiles on status bar quick settings, it's easy to add more tiles or change layout go to settings > pac pellets > quick settings panel > tiles and layout > add (you can add and rearrange tiles in here)
incapable86 said:
1.Not available, since they follow PA(paranoid android) to release hybrid for pa 4.4 so they can test it on pac 4.4 and merge it..
2.I don't know why are there less battery icons but it can be a work-in-progress since the ROM itself is work-in-progress and not complete, you can find new features here:
3. New pannels? I hope you mean new tiles on status bar quick settings, it's easy to add more tiles or change layout go to settings > pac pellets > quick settings panel > tiles and layout > add (you can add and rearrange tiles in here)
Click to expand...
Click to collapse
Alright thank you!
Haha yea I guess I should've been more specific about the last one.
On the home page the different screens I referred to as panels. So whenever you delete the last item off that screen it disappears. So my question was if that was supposed to happen and if there was any way to keep them there?
Bloodhawk_77 said:
Alright thank you!
Haha yea I guess I should've been more specific about the last one.
On the home page the different screens I referred to as panels. So whenever you delete the last item off that screen it disappears. So my question was if that was supposed to happen and if there was any way to keep them there?
Click to expand...
Click to collapse
Yes that is supposed to happen in kitkat, no you can't keep them unless you fill the homepage with icons, there isn't much customization options available for the launcher except rows and columns you have to use another launcher for now.
incapable86 said:
Yes that is supposed to happen in kitkat, no you can't keep them unless you fill the homepage with icons, there isn't much customization options available for the launcher except rows and columns you have to use another launcher for now.
Click to expand...
Click to collapse
Ok awesome thanks a lot!
Maybe I'm just guily of believing something I "read somewhere on the internet," but I thought KitKat was supposed to have secure element emulation. This was to get around the need for the chip and allow us to use NFC tap to pay via Google Wallet. I also "read somewhere" that this rom had it (CM11 didn't.) But in wallet, it says tap to pay is unavailable.
Of course, I'm running on the latest nightly, so maybe that has something to do with it?
Not having tap to pay isn't a deal breaker for me...I'm just OCD. If there's a feature on my phone that should work, I'll spend an infinite amount of time trying to get it to work (even if it's something I probably won't use!)
Updated bug list
So after using this rom, I have compiled a list of all the bugs I've encountered so far.
Since there I can’t post in the dev thread yet I'll just post them here.
Since the May 1st build:
1. .gif files don’t load properly and will occasionally freeze and force close app
2. Certain websites take a while to load and occasionally freeze and force close app
3. Widgets don't resize properly. For example if you expand the tiles by on to make it 5x5, a widget that says its 4x1 will turn out to be 5x2
4. NFC still requires a restart to turn off
5. Still no camera but I'm patient :fingers-crossed:
So far these are the major ones I've found but I'll post more if I find them.
Bloodhawk_77 said:
So after using this rom, I have compiled a list of all the bugs I've encountered so far.
Since there I can’t post in the dev thread yet I'll just post them here.
Since the May 1st build:
1. .gif files don’t load properly and will occasionally freeze and force close app
2. Certain websites take a while to load and occasionally freeze and force close app
3. Widgets don't resize properly. For example if you expand the tiles by on to make it 5x5, a widget that says its 4x1 will turn out to be 5x2
4. NFC still requires a restart to turn off
5. Still no camera but I'm patient :fingers-crossed:
So far these are the major ones I've found but I'll post more if I find them.
Click to expand...
Click to collapse
1, 2 points need the latest graphic driver, you can find the flashable zip here: http://forum.xda-developers.com/showthread.php?p=51035856
Driver needs to be flashed on each nightly as it gets replaced each time with old driver..I won't recommend flashing it same time as you flash rom because it will cause more issues..first boot rom and the go to recovery and flash the drivers..
3. Widget issue should be reported on pac-rom forums..I don't know if it happens on cm11.
4, 5. Known cm11 issues, No fix as yet..
Sent from my HTC Amaze 4G using XDA Premium 4 mobile app
This is a project that I have been working on for a little while for Bacon. I also have a FLO, and build this ROM for it also when I am bored/have nothing to do. I figured I may as well open a thread for it and see if other users like it. This ROM is compiled w/ Uber 4.8 on the ROM side and Uber 4.9 on the kernel side. I have added a few little optimizations here and there. I will add a feature list a little later. Sorry for the crappy OP. If you have any questions, feel free to @ me in the thread. I will answer anything that I can.
Features Added:
Delta Updates
Reboot/reboot recovery QS tile
Sync QS tile
Doze/Ambient display tile
Heads Up tile
Option for QS tile haptic feedback
Option to show 4 QS tiles per row
Slim's Lockscreen Shortcuts
Slim Custom Doze settings
Call recording for any country
Call recording encoder/format choice
Show each app name during art optimization
Heads Up options
Ability to hide SU status bar icon
Slim Seek Bar
Slim incall proximity speaker
Volume panel timeout
Force expanded notifications
Flip phone to mute/reject call
Option to disable privacy guard notifications
Built with CM's CameraNext inline instead of Camera2
Updated CameraNext from CM12S
LCD density changer
Option to remove data/wifi activity arrows
Downloads:
ROM:
Uber CM-12.1 Download
GAPPS:
5.1 Gapps Download
Some thanks to a few people:
@dankoman for gapps and help all the time lol.
@cristianomatos
@temasek
Reserved
Thanks looks good
Downloading right now , will report if any issues..
SuperSU built in?
Sent from my Nexus 5 using XDA Free mobile app
smalss said:
SuperSU built in?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Yup.
This is look really good
looks promising
7sen said:
This is look really good
Click to expand...
Click to collapse
arief347 said:
looks promising
Click to expand...
Click to collapse
Then get on it! Lol. Running great on my Hammerhead and Bacon. A few little CM bugs that need to be squashed. Other than that, all good!
Sent from my Oneplus One using Tapatalk
Running great so far. Smooth ans snappy.
Running fast and super feel good with this rom. Last tow days I flash 4 roms maybe [emoji29]. Now I keep this , what's mod for sound you are use[emoji102] sounds speaker really nice
Just setting up but initial impressions are very good... can we expect regular updates on this rom?
TrOjAn
Im just downloading is there dpi option ?
---------- Post added at 04:46 PM ---------- Previous post was at 04:45 PM ----------
TrOjAnUK said:
Just setting up but initial impressions are very good... can we expect regular updates on this rom?
TrOjAn
Click to expand...
Click to collapse
Im going to stick my neck out here and say Yes...Robbie has always been up to date
All set up now and running pretty sweet..
2 things I notice missing, not of ANY importance but used to having them 1) unable to resize navigation bar and 2) unable to reposition the clear all button.
Nothing major, other than that what a brilliant rom, loving it...
TrOjAn
I would like to report one issue with the APN . Upon every reboot my APN changes I.e APN chosen does not stick . Had the similar issue with Euphoria and the Dev switch to stock APN's and all was good then ..
hey guys, how long did the initial boot take? I seem to have been stuck on the cid boot animation for quite some time.
Sc0rp10 said:
hey guys, how long did the initial boot take? I seem to have been stuck on the cid boot animation for quite some time.
Click to expand...
Click to collapse
First boot can take quite a while, around 5 minutes, maybe even more, did you clean flash?
TrOjAn
@RobbieL811 The ROM works fantastic . Snappy & small CM bugs here and there which can be dealt with . Anyway will Color Control be supported for the stock kernel like in Franco ?
does this rom requires 5.1 bootloader and radio... is it mandatory or not to update them?
grgana said:
does this rom requires 5.1 bootloader and radio... is it mandatory or not to update them?
Click to expand...
Click to collapse
I tried to flash ROM with out updating bootloader and it didn't work. So you probably need to update!
Sent from my Nexus 5 using XDA Free mobile app
grgana said:
does this rom requires 5.1 bootloader and radio... is it mandatory or not to update them?
Click to expand...
Click to collapse
If you can't use a PC for any reason.. Here's a link to a flashable zip...I take no credit for this ...
Credits to Asimo ..http://forum.xda-developers.com/goo...date-bootloader-radio-lmy47d-5-t3052571/page3
Introduction
Xettings is a small substratum module for AOSPA. I have tested it on OP3 and 3T but it should work on other devices running PA nougat. Substratum (800+) is must
Features:
- Full control over statusbar clock position (Left/Center/Right)
- Multiple colors and clock options
- Use LTE icon instead of 4g (visual only, doesn't affect speed/network)
- Hide disabled sim icon
- Change QS tiles number (4-8)
- Rounded recents (some substratum themes may override it)
- Hide QS labels (v1.4)
- Added color options for theme engine (v1.4)
Important:
- Installing any substratum theme automatically disables PA color engine. I cannot change this behavior. But you can use Xettings with other themes as long as both themes are not changing the same thing (like Flux changes rounded recents). And K-Klock changes clock.
- This thread is not a place to request features. Substratum cannot add features to a ROM. I have already added whatever is possible.
- This is definitely not a place to rant about AOSPA or PA devs. Take your feelings someplace else.
Source
https://github.com/ungeeked/Xettings
Credits
@Spannaa for his excellent guide on textclock
@KpChuck
Reserved
Does is work on stock based roms?
U4mes said:
Does is work on stock based roms?
Click to expand...
Click to collapse
You have ozone for that
thank you @ungeeked, Xettings works with ExperienceOS R14.0 Lite
Nice @ungeeked your thread is highlighted in the xda news. :good:
You're my hero. Works pretty well on white themes, even with a white qs background. Kudos, I was using Ozone + PA KKlock for all of this, and kklock did not display at times.
I have always been away from PA because couldn't center clock.
you made my day as soon PA will be released for OP2
thanks in advance man!
@ungeeked Thanks!
А little feature request:
Can you add current network speed as in OOS to statusbar?
Thanks again!
L.Opanovych said:
@ungeeked Thanks!
А little feature request:
Can you add current network speed as in OOS to statusbar?
Thanks again!
Click to expand...
Click to collapse
Read the thread!!!
- This thread is not a place to request features. Substratum cannot add features to a ROM. I have already added whatever is possible.
Click to expand...
Click to collapse
@ungeeked thanks a lot for this. Please let us know if you intend to take feature requests.
L.Opanovych said:
@ungeeked Thanks!
А little feature request:
Can you add current network speed as in OOS to statusbar?
Thanks again!
Click to expand...
Click to collapse
certain apps available on play store can do it. Substratum cannot add features. It can enable what's already there in rom. For example 4G to LTE in PA is enabled by changing a single bool value. Similarly the code for text clock is already there in all android ROMs. Just need to enable it. But network meter is not in PA. Which means I'll need to edit smali. Its a lot of work for something that can be done via 3rd party app. Also substratum doesnt let us edit smali.
shrek8421 said:
@ungeeked thanks a lot for this. Please let us know if you intend to take feature requests.
Click to expand...
Click to collapse
I will implement stuff as long as it is possible via substratum
ungeeked said:
I will implement stuff as long as it is possible via substratum
Click to expand...
Click to collapse
Ah ok. For example a caffeine tile, is that possible?
shrek8421 said:
Ah ok. For example a caffeine tile, is that possible?
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=xyz.omnicron.caffeinate
ungeeked said:
https://play.google.com/store/apps/details?id=xyz.omnicron.caffeinate
Click to expand...
Click to collapse
I did try that but I had very flaky results. But thanks for your help.
shrek8421 said:
I did try that but I had very flaky results. But thanks for your help.
Click to expand...
Click to collapse
Multiple quick settings apps are available that have this. But I cannot add it
Hi thanks a lot for this.. Is it possible to have custom data format on this?
arvindgr said:
Hi thanks a lot for this.. Is it possible to have custom data format on this?
Click to expand...
Click to collapse
What format (s) do you want
ungeeked said:
What format (s) do you want
Click to expand...
Click to collapse
Actually than for seeing date, I use that function to set my name, As in pic
It reminds me that I've unleashed the power of my hardware...!
Is it possible to add an option to hide the lock icon from recents? As it seems to be incompatible with apps with long names resulting in an unpleasant look.
Also, since color engine gets disabled when substratum is working (and even when it is enabled it fails to theme every section within the settings app), could you add some action bar and accent color just like in ozone please? That would make this app perfect.
i loved to use Paranoid Android's PIE Control on my old phone for years, now on Poco, no Custom-Rom seems to have this feature. Why?
Aaskereija said:
i loved to use Paranoid Android's PIE Control on my old phone for years, now on Poco, no Custom-Rom seems to have this feature. Why?
Click to expand...
Click to collapse
You can try LMT, very lightweight and customizable (I had it all black with white icons) : https://forum.xda-developers.com/showthread.php?t=1330150
duttyend said:
You can try LMT, very lightweight and customizable (I had it all black with white icons) : https://forum.xda-developers.com/showthread.php?t=1330150
Click to expand...
Click to collapse
Thanks for the tipp. Thats exactly i was looking for, but after some time it stops working in the android settings. Outside everything is fine but it doesn't work inside, so, also a nope...
Aaskereija said:
Thanks for the tipp. Thats exactly i was looking for, but after some time it stops working in the android settings. Outside everything is fine but it doesn't work inside, so, also a nope...
Click to expand...
Click to collapse
Ah sorry to hear that.
Anyhow, Google has removed the mechanism used by these apps (also the XDA gesture one) in Android 11, so pie controls don't have much future unfortunately...
duttyend said:
Ah sorry to hear that.
Anyhow, Google has removed the mechanism used by these apps (also the XDA gesture one) in Android 11, so pie controls don't have much future unfortunately...
Click to expand...
Click to collapse
damnit google ^^ well i found a workaround because i really don't want to use the stock navigation, i now use LMT and fortunally the custom-rom i use offer a navigation switch quick panel, so if i really need to go inside the settings, i can switch it on, navigate with the stock one and can still use LMT again outside. Thats kinda dumb but it works and it's at least something..
Aaskereija said:
damnit google ^^ well i found a workaround because i really don't want to use the stock navigation, i now use LMT and fortunally the custom-rom i use offer a navigation switch quick panel, so if i really need to go inside the settings, i can switch it on, navigate with the stock one and can still use LMT again outside. Thats kinda dumb but it works and it's at least something..
Click to expand...
Click to collapse
Ok, that's an acceptable solution. Are you talking about Omni ROM ?
P.S.: Here is the article explaining in details the removal of the overscan feature used by LMT and others : https://www.xda-developers.com/google-confirms-overscan-gone-android-11-crippling-third-party-gesture-apps/
i dont want to make a new thread why none of the android 10 custom roms doesnt have oreo/pie recents
duttyend said:
Ok, that's an acceptable solution. Are you talking about Omni ROM ?
Click to expand...
Click to collapse
Havoc
Verhuel15 said:
i dont want to make a new thread why none of the android 10 custom roms doesnt have oreo/pie recents
Click to expand...
Click to collapse
well, i guess for the same reasons like the my issue