Related
FLASHING CUSTOM RECOVERY (CWM) FROM LGMDP
FOR LG P500 / OPTIMUS ONE ONLY
This method works for all unrooted p500/optimus one and p500/optimus one devices stuck in emergency mode.
DO THIS ON YOUR OWN RISK, I WILL HAVE NO LIABILITY IF YOU BRICK YOUR PHONE !!!
download lgmdp : Download here
download clockwork recovery (5.0.2.0): Download here
1. disable lg modem ( in device manager->modems)
2. now connect your phone to pc. (If phone not booting into rom connect in emergency mode, turn off phone and press (volup+return+power) buttons simultaneously)
3. start lgdmp
4. click "select port"
Phone will be automatically detected press "connect"
(close the pop up window of image select generally you will get it on connect of lgmdp)
5. backup nv for safety (tools->nv backup) {ignore this step when phone connected in emergency mode, i did ignore this and found no risk of loosing nv}
6. extract downloaded recovery into a new folder
7. select the extracted recovery folder as "image folder or select image" in lgmdp
(it gives some errors as other files are not present, donot worry as we are only flashing recovery those 2 files are enough, files "recovery" and "partiton" will be automatically checked and others gray out)
8. Close the selection window and press "download" (in main window of lgmdp)
DONOT DISCONNECT YOUR MOBILE UNTILL IT SHOWS DOWNLOAD COMPLETE AT BOTTOM
it shows in middle trying to connect to phone etc. donot touch the phone it will be automatically connect everytime.
AFTER DOWNLOAD COMPLETE your device should boot into recovery
1. switch off your device
2. pressing (home+vol down+power) buttons simultaneously should boot into recovery.
now install whichever rom you want and enjoy
Tested on O1 having baseband v10 and v20 also, from normal boot and emergency mode as well and it works.
mak.3736 said:
FOR LG P500 / OPTIMUS ONE ONLY
This method should work for all unrooted devices and p500/optimus one devices stuck in emergency mode.
This is tested on O1 having v10 baseband and it works.
SHOULD WORK FOR V20 as well
download lgmdp : http://www.mediafire.com/?ov799yg7vbnce9j
download cwm recovery : http://www.mediafire.com/?1lcjbfa3ypqbqj3
1. disable lg modem ( in device manager->modems)
2. now connect your phone to pc.(if phone not booting into rom connect in emergency mode (home+volup+return) button holding simultaneously)
3. start lgdmp
4. click "select port"
Phone will be automatically detected press "connect"
(close the pop up window of image select generally you will get it on connect of lgmdp)
5. backup nv for safety (tools->nv backup) {ignore this step while connecting phone in emergency mode, i did ignore this and found no risk of loosing nv}
6. extract downloaded recovery into a new folder
7. select the extracted recovery folder as "image folder or image select" in lgmdp
(it gives some errors donot worry, but files "recovery" and "partiton" will be automatically checked and others gray out)
8. press start or download
DONOT DISCONNECT YOUR MOBILE UNTILL IT SHOWS DOWNLOAD COMPLETE AT BOTTOM
AFTER DOWNLOAD COMPLETE your device should boot into recovery
1. switch off your device
2. pressing (home+vol down+power) buttons simultaneously should boot into recovery.
now install whichever rom you want and enjoy
TESTED ON v10 baseband LG O1 and it worked for me.
Click to expand...
Click to collapse
i need to try it once.thanks tho
phone is not detecting
no phone to connect.LGMDP-v1.5 is not detecting the phone.pls help...my full problem http://forum.xda-developers.com/showthread.php?p=19303459#post19303459
ojobinv said:
no phone to connect.LGMDP-v1.5 is not detecting the phone.pls help...my full problem http://forum.xda-developers.com/showthread.php?p=19303459#post19303459
Click to expand...
Click to collapse
reinstall drivers.
let your phone be on (stuck at lg logo), connect to computer, flash custom recovery from lgmdp.
There might errors occur at nv backup or nv restore but it will flash recovery.
my phone doesnt even starting in emergency mode.
1. disable lg modem ( in device manager->modems)
2. now connect your phone to pc. (If phone not booting into rom connect in emergency mode, turn off phone and press (home+volup+return) buttons simultaneously)
3. start lgdmp
4. click "select port"
Phone will be automatically detected press "connect"
(close the pop up window of image select generally you will get it on connect of lgmdp)
5. backup nv for safety (tools->nv backup) {ignore this step when phone connected in emergency mode, i did ignore this and found no risk of loosing nv}
6. extract downloaded recovery into a new folder
7. select the extracted recovery folder as "image folder or select image" in lgmdp
(it gives some errors as other files are not present, donot worry as we are only flashing recovery those 2 files are enough, files "recovery" and "partiton" will be automatically checked and others gray out)
8. press start or download
DONOT DISCONNECT YOUR MOBILE UNTILL IT SHOWS DOWNLOAD COMPLETE AT BOTTOM
AFTER DOWNLOAD COMPLETE your device should boot into recovery
1. switch off your device
2. pressing (home+vol down+power) buttons simultaneously should boot into recovery.
now install whichever rom you want and enjoy
Tested on O1 having baseband v10 and v20 also, from normal boot and emergency mode as well and it works.[/QUOTE]
hi
i tried to update firmware through kdz updater.
it erased the c drive but then due to some error my phone is not starting even in emergency mode.
i tried all possible combinations of hard keys.
luckily its under warranty.
but i dont know any convincing reason that the service center would accept.
plz help.
farzii said:
hi
i tried to update firmware through kdz updater.
it erased the c drive but then due to some error my phone is not starting even in emergency mode.
i tried all possible combinations of hard keys.
luckily its under warranty.
but i dont know any convincing reason that the service center would accept.
plz help.
Click to expand...
Click to collapse
Tell them you were updating phone through official lg tool software updater, the phone went to emergency mode during process, it shutdown and it didnt power on since then.
They wont ask a single question after this. All the best
(I did use the same explanation)
Heyy, so when I do this(note I am stuck in recovery mode on the phone), it says Error can't open serial port, reboot and restart. Every time I click download to put the recovery in it it does this.
MXFrodo195 said:
Heyy, so when I do this(note I am stuck in recovery mode on the phone), it says Error can't open serial port, reboot and restart. Every time I click download to put the recovery in it it does this.
Click to expand...
Click to collapse
i experienced same problem in one of my friends computer, but then it was solved when we tried again after fresh install of windows and drivers, better you try on any other computer, i m sure u will get it work.
mak.3736 said:
i experienced same problem in one of my friends computer, but then it was solved when we tried again after fresh install of windows and drivers, better you try on any other computer, i m sure u will get it work.
Click to expand...
Click to collapse
I tried from another computer, it's doing the same exact thing. Any other ideas?
Thats what happens when I click download, when I click Select Image, nothing is happening at all. In recovery should I be mounting anything?(data, sdcard, cache, system). Or should I be mounting the USB Storage? I am just baffled, I must be doing something simple wrong, as it seems pretty straightforward.
Hi,
Thank you for the informations.
after image file selected and started, error message was occured "Error! Partition table"
Plz help...
solenun said:
Hi,
Thank you for the informations.
after image file selected and started, error message was occured "Error! Partition table"
Plz help...
Click to expand...
Click to collapse
I think you are not selecting partion.mbn, download the recovery zip once again and follow below:
there are 2 files in zip, recovery image and other is partition.mbn.
Make sure both the files are selected and ticked while image select.
partition.mbn will be selected in partition table,
recovery.img will be selected in recovery image,
then close the window of image select and press download.
MXFrodo195 said:
I tried from another computer, it's doing the same exact thing. Any other ideas?
Thats what happens when I click download, when I click Select Image, nothing is happening at all. In recovery should I be mounting anything?(data, sdcard, cache, system). Or should I be mounting the USB Storage? I am just baffled, I must be doing something simple wrong, as it seems pretty straightforward.
Click to expand...
Click to collapse
uninstall other phone drivers (nokia , motorola etc.) from computer, reboot, reinstall lg p500 usb drivers, reboot and follow guide as the same.
mak.3736 said:
uninstall other phone drivers (nokia , motorola etc.) from computer, reboot, reinstall lg p500 usb drivers, reboot and follow guide as the same.
Click to expand...
Click to collapse
Don't forget to disable the LGE virtuial modem with tools in the LGDMP after it "sees" the phone(leaving the other LGE modem active) (that is the LGDMP)Also after the disable cmd do not restart your computer(mine suggestes this after).Select your image zip the p500 partition table is included there.You will get about 4 or 5 error windows just ok click them away (ignore) and run download.It takes a short time and then pauses a min. and continues.DO NOT disconnect or stop/cancell anything untill you get a red DOWNLOAD COMPLETE!..I used this a couple of times and feel it a very safe way to flash
is it possible to flash amon ra recovery via LGMDP.exe?
if so, how?
vivithbharath said:
is it possible to flash amon ra recovery via LGMDP.exe?
if so, how?
Click to expand...
Click to collapse
yes , but i didnt test it.
try it by replacing clockwork's recovery.img with amonra's revovey.img in folder u get after extracting the zip of clockwork provided in thread.
(i mean use partition.mbn from clockwork zip in thread and amonra recovery.img and flash with lgmdp)
mak.3736 said:
yes , but i didnt test it.
try it by replacing clockwork's recovery.img with amonra's revovey.img in folder u get after extracting the zip of clockwork provided in thread.
(i mean use partition.mbn from clockwork zip in thread and amonra recovery.img and flash with lgmdp)
Click to expand...
Click to collapse
thanks! will try and post the results
My start button is greyed out, clicking it is useless.
Edit: after selecting the file, I closed the window and clicked download. After backing up my NV, the flash worked.
jasonwsc said:
My start button is greyed out, clicking it is useless.
Edit: after selecting the file, I closed the window and clicked download. After backing up my NV, the flash worked.
Click to expand...
Click to collapse
yes i mentioned in procedure press "start" or "download", its obvious start button will be grayed out as all files are not selected. so close file select window and press "download" in main window..
............
I have added it in steps as well now
Why is it that after I selected the port, the select image button is not doing anything? it's clickable but it does nothing?
bryanposas said:
Why is it that after I selected the port, the select image button is not doing anything? it's clickable but it does nothing?
Click to expand...
Click to collapse
After selecting port , a window will pop up to browse for "image folder" close this poped up window then all the functions of main window of lgmdp will be accesible
i Was on JB V20A and i installed the root and the CWM and try to put cwm. to check if bootloader was still locked well it does.
and now im stock on L9 Security error.
i can enter on S/W and tryin using the "UpTestEX_mod2_marwin" the Window enabler and the Http.exe to flash it but.
i try phone mode CS_emergency and emergency but when it start to check the phone it stuck on 15% and i can turn on the phone (thats the way i used to bypass the 15% and get with the instalation)
so what now? i can enter on S/W and Recovery Mode LG (This mode is for data backip at service center. after reboting press power key to keep using phone), still can do hard reset pressing volumen less home and power but nothing happen keep with the error.
i know while the phone turn on there's a solution.
my phone is L9 p768g
just don't view the post and ignore. :/
TY for all the view and the 900000 helps. nvm i solved ty to my fb L9 friends so... jodan
Jctatis said:
TY for all the view and the 900000 helps. nvm i solved ty to my fb L9 friends so... jodan
Click to expand...
Click to collapse
I have the same situation, may I know what your solution is?
twinwoods said:
I have the same situation, may I know what your solution is?
Click to expand...
Click to collapse
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers: http://forum.xda-developers.com/showthread.php?t=2119090
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE. Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK, the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
It works!!
shucrut said:
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers:
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK , the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
Click to expand...
Click to collapse
Thank you so much. Yes my P769 BOOTLOADER definitely is locked and I can't even root it with all methods provided in xda, I use exactly your method to get my L9 back to life -- although I have to flash it back to original stock but at least it's BACK! Thank you so much. I saw some other people have the same issue but they can't make it work, hopefully your answer shed the light to ALL!
security error just use the lg pc suite and remove the lines or the host put recover via recovery and put your imei and it will start to download the stock Rom
send from cursed G-P768g 4.1.2. Panamà
grupo Facebook L9 latino América: https://m.facebook.com/groups/54638...ity&actorid=1381295152&__user=100001612362905
Thank you soo much!!! you seriously saved me.
shucrut said:
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers: http://forum.xda-developers.com/showthread.php?t=2119090
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE. Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK, the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
Click to expand...
Click to collapse
I tried this method and the offline kdz method and here is the trouble I am having.
1. With this method I do everything perfect the device shows up for a couple seconds then it disappears so I cannot go any further.
2. With the offline fix I followed the OP to the letter and when I get to the part where I click on "normal web upgrade" I open it and start the upgrade as stated in the OP and nothing. I get the retry or cancel internet warning and ignore or close it and it will not even try pushing the file.
Anyway I have tried 2 different machines to no avail I am wondering if anyone has had a similar problem and fixed it?
Sent from my GT-I9505G using Tapatalk 2
Didn't work for me! But I tried another method and that saved me from a lot of steps.
Just install the driver and the latest LGMobile Support Tool
Start your phone in Software upgrade mode... Power + Vol up
In the LGMobile Support Tool click on Options and then Upgrade Recovery
Put your IMEI in the option that pops up
Wait for the miracle!
It worked for me ... NO MORE LG SECURITY ERROR
MJHawaii said:
I tried this method and the offline kdz method and here is the trouble I am having.
1. With this method I do everything perfect the device shows up for a couple seconds then it disappears so I cannot go any further.
2. With the offline fix I followed the OP to the letter and when I get to the part where I click on "normal web upgrade" I open it and start the upgrade as stated in the OP and nothing. I get the retry or cancel internet warning and ignore or close it and it will not even try pushing the file.
Anyway I have tried 2 different machines to no avail I am wondering if anyone has had a similar problem and fixed it?
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Fixed my phone too. I removed lookout permanently and my phone stopped functioning, so I did the method u said and worked great, I got scared but it worked. Lookout is installed again, I can root again and uproot if I want, it works great again. I recommend this method to all
Sent from my LG-P769 using xda app-developers app
it worked! thanks!
the easiest!!
Owadel said:
Didn't work for me! But I tried another method and that saved me from a lot of steps.
Just install the driver and the latest LGMobile Support Tool
Start your phone in Software upgrade mode... Power + Vol up
In the LGMobile Support Tool click on Options and then Upgrade Recovery
Put your IMEI in the option that pops up
Wait for the miracle!
It worked for me ... NO MORE LG SECURITY ERROR
Click to expand...
Click to collapse
i think this is the easiest method to get back to your "last working condition".. i mean nothng got deleted, nothng chnged.. i'm happy to get rid of the "security error" condition!! thanks a lot
shucrut said:
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers: http://forum.xda-developers.com/showthread.php?t=2119090
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE. Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK, the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
Click to expand...
Click to collapse
cant install fastboot drivers windows 10
Recently while flashing alpha version of MIUI marshmallow on my Mi 4w, my phone got completely bricked. Complete brick in the sense, it won't turn on, neither charge nor show any led indication. This guide should work on other phones also.Let's start:-
1) Although it seems like your phone wont turn on, your phone is actually working, it's just it wont show anything on the screen(no display).
Make sure your phone is charged properly(it will charge even if the led doesn't show any indication).
2) Download and install Mi flash tool and then Fastboot file of your device. http://en.miui.com/a-234.html
3) Unzip the fastboot image, a folder containing flash all.bat should appear if not, extract the extracted file again. Winrar should work fine.
4) Now open Mi flash tool(as administrator) and select the fastboot folder from Mi flash using browse option and also select the proper fastboot script according to need.
Note: Flash_all.bat will completely erase your internal storage.
5) Now press volume down(-) and power key to enter into fastboot. Note: it won't show any visual whatsoever but it'll work.
6) Connect your phone to your pc. It should show various flash devices connected to your computer and those devices may continuosly connect and disconnect. If not it'll show QHUSUB_BULK install the driver using device manager.
7) On Mi flash tool, some device name should show on the devices list if not click refresh and try reconnecting the device. Note: If you dont have proper drivers installed on your pc, this procedure won't work.
8) Finally click on flash and flashing will start. It'll take some time. Once done it'll show operation completed successfully.
9) Finally boot your device using power key.
Brick has received QHSUSB_BULK simple. This is the normal and regular encounter. Hardbrick, you must check point.
2ConHeo said:
Brick has received QHSUSB_BULK simple. This is the normal and regular encounter. Hardbrick, you must check point.
Click to expand...
Click to collapse
who said so?
tested and working
that normal check point is a pain in ass to execute in the first place
Thanks a ton.....It helped a lot
thank u...
thank
How do I put the phone into fastboot mode if it is hard bricked? It won't turn on, I get no responce from phone. When I use method connecting test point to metal cover on mother board of phone usb connects to PC and MiFlash recognizes phone. Try to flash though and I get an error message. No matter what ROM I use, zipped, unzipped or tgz file. Can my phone be unbricked? What am I doing wrong? I have a Mi Max 64GB and am using HELIUM Roms. Please help. Error message is:
The filename, directory name, or volume label is incorrect.(0x8007007b: Open programmer "MPRG*.hex").
I have no clue. Not my first time flashing ROMs or unbricking a phone. It is my first time on a Xiaomi. Only done blackberry and samsung before.
hammer77 said:
How do I put the phone into fastboot mode if it is hard bricked? It won't turn on, I get no responce from phone. When I use method connecting test point to metal cover on mother board of phone usb connects to PC and MiFlash recognizes phone. Try to flash though and I get an error message. No matter what ROM I use, zipped, unzipped or tgz file. Can my phone be unbricked? What am I doing wrong? I have a Mi Max 64GB and am using HELIUM Roms. Please help. Error message is:
The filename, directory name, or volume label is incorrect.(0x8007007b: Open programmer "MPRG*.hex").
I have no clue. Not my first time flashing ROMs or unbricking a phone. It is my first time on a Xiaomi. Only done blackberry and samsung before.
Click to expand...
Click to collapse
did you solve the problem ?
Rajdip said:
Recently while flashing alpha version of MIUI marshmallow on my Mi 4w, my phone got completely bricked. Complete brick in the sense, it won't turn on, neither charge nor show any led indication. This guide should work on other phones also.Let's start:-
1) Although it seems like your phone wont turn on, your phone is actually working, it's just it wont show anything on the screen(no display).
Make sure your phone is charged properly(it will charge even if the led doesn't show any indication).
2) Download and install Mi flash tool and then Fastboot file of your device. http://en.miui.com/a-234.html
3) Unzip the fastboot image, a folder containing flash all.bat should appear if not, extract the extracted file again. Winrar should work fine.
4) Now open Mi flash tool(as administrator) and select the fastboot folder from Mi flash using browse option and also select the proper fastboot script according to need.
Note: Flash_all.bat will completely erase your internal storage.
5) Now press volume down(-) and power key to enter into fastboot. Note: it won't show any visual whatsoever but it'll work.
6) Connect your phone to your pc. It should show various flash devices connected to your computer and those devices may continuosly connect and disconnect. If not it'll show QHUSUB_BULK install the driver using device manager.
7) On Mi flash tool, some device name should show on the devices list if not click refresh and try reconnecting the device. Note: If you dont have proper drivers installed on your pc, this procedure won't work.
8) Finally click on flash and flashing will start. It'll take some time. Once done it'll show operation completed successfully.
9) Finally boot your device using power key.
Click to expand...
Click to collapse
Link not working.
Using another mi flash tool also get nothing. How do I know I get into fastboot?
Already pressed volume down and power button but nothing happened. And checking fastboot devices nothing comes up. Also in mi flash tool nothing.
So i wanted to flash a new firmware on my MTK Device (UleFone Power 2), but i ran into some Errors while doing so, thus , my phone died in the process.
Following Errors occurred, depending on which (SP Flash Tool;SPMultidownloadflashtool;etc) you use:
Errors:
Internal Buffer
STATUS_SEC_IMGHDR_TYPE_MISMATCH
Through digging and asking on the web, two wonderful and very very helpful people: alterogi and finally Sunray888
This solution popped up. Thank you so much to both of them!!
Solution:
But first: You are now warned, try this at your own risk.
Quoted from Sunray888, alterogi. Credits to them.
My German Guide (more detailed with Pictures): Outside of XDA
Side Note: For the UP2 Rom you use SPMultiPortFlashDownloadProject , for the UK6P ROm you use SPFlashTool.
(Links & Attachments below!) (Adb-Fastboot.zip & Checksum.zip)
Part1:
1. Download all the files. (Below are the links and attached files.
2. Extract each zip to its own folder. Then Put the files of the Checksum.zip into the ROM Folder of the Ulefone Power 2.
3. Run the Checksum.exe and wait until it is done. It will show up in the black CMD when it's finished. A new Checksum.ini should be in the folder now.
Part2:
1. Make a backup of your NVRAM and NVDATA, a full ROM backup if you can.
2. Get the Oukitel K6000 Plus ROm Version 2.0 Ready. Extract it to its own folder somewhere on your desktop.
3. Open the SPFlashtool and select the android scatter file of the Oukitel Rom.
4. Connect your phone, hold Volume down and press on "Download" in the SPFlashTool. Now you wait for the process to end, WHILE still holding the button down.
5. After it is done flashing your new Firmware unto your phone, start it like you would normally do. Disconnect your phone now. You can now also skip the Setup Details, since we still have to flash the original Firmware.
6. Go to Device Infos on the bottom of your phone settings, tap a few times on Build Number until the Developer Options activate. Go back and tap on Developer Options.
7. In here you activate OEM Unlock and USB Debugging. Back to the pc: Now you open a CMD Windows and navigate to your extracted ADB-Fastboot Folder. (Some Pictures of this are on my German Tutorial Thread, Link above).
8.Connect your phone, tick the avaible spot of the upcoming new popup notification. Shutdown your phone now. Hold Volume Up and Power Button at the SAME Time until the Fastboot Menu pops up.
Make sure your phone is still connected to the pc.
9. In the cmd window you will now have to type the following thing: fastboot oem unlock
9.5 Another Method to get into fastboot mode: (OR enabled usb debug, accept connection between your PC and Ulephone and send command fastboot reboot bootloader after that "fastboot oem unlock")
10. After the process is done. You are still in fastboot mode.
And let the phone connected to the Pc.
11. Now you have to flash the original ROM/Firmware. In this case only Version 17 will work.
On this step i had a lot issues with "insufficient buffer"-Errors under SP Flash tool, but there is a solution for this.
Be careful :
Try to use #SPMultiPortFlashDownloadProject Version 3.1620 - only this software worked for me,earlier Versions i tried ( v.3.1636 ) always showed an Error.
Current Status: Phone is still connected to pc, fastboot mode, oem has just been unlocked by yourself.
What to do now:
12 Open the SPMultiPortFlashDownloadProject, load scatter file of the Ulefone Power 2 Firmware, then press scan. Nothing will happen now, so be quick: Don't disconnect your phone.
Press Volume Up + Power Button at the same time to simulate a new connection to the pc. While the phone is still connected via cable! We have to do this. You will now hear a sound which you normally would here when connecting a new device to your Pc. Now you just have to keep holding the Volume Up Key.
IMPORTANT:
Don't let go of the button until the Programm shows up a Green Tick which signals the end of the Process. Now you can let go of the button.
13. After the scan has finished, press start and flash firmware. But how? It's easy. Just do the same again. ->>
13.1 Press Start in the Flash Programm.
13.2 We have to simulate a new connection. Hold Vol+ and Power Button. Until you hear the sound again, now only keep holding the Vol+ Button.
14. Wait for the green Tick Notification. Until then: Don't you dare let go of the Vol+ Button. When it shows up, you're pretty much done. Congrats!
15. Restore NVRAM and NVDATA.[/I] through mtk engineering mode: open dialer and call *#*#3646633#*#* , scroll down to GRPS and type in your IMEI (can be found in the box, in which your phone came shipped with). If it says something like that it's successfully written.-> Activate Airplanemode, wait a few seconds, deactivate it, activate Mobile Data Connection and wait. It should show a mobile data active.
Download Links: (I didn't upload those files,i simply shared the links, all credits to their respective owners. Use at your own risk.!)
UP2 Rom: Google Drive
Flashtool for UP2 Rom: One Drive
UK6P 2.0 + Flashtool: Click me
Checksum Gen Zip: --Below--
ADB Components: --Below--
UPDATING:
After flashing V15 Ulefone Firmware, use the SP FLASH TOOL to flash the newest firmware via "Firmware Upgrade" mode. remember to keep pushing vol up before connecting phone!
How to:
Press Download in Tool
Push and hold vol up
Connect cable to pc.
wait until green tick shows up.
Profit.
Same situation here. I've tried flashing with and without battery, no success. I can confirm that I did NOT lock the bootloader. Not that it helps me much.
I've tried using different versions of SPFT in addition to the multiport tool, but they either don't work with Power 2 scatter file, or show the same error.
This can potentially be a driver / USB issue, so I will probably try that next (different computer, fiddle with the drivers). I've also seen claims that SPFT v3 can happily flash over this, and then newer versions start working too, so try that if you can. It did not work for me - the download never starts on my computer with v3.
I can also add that I can flash preloader as well, although I try and leave that off when possible. The modem and lk* partitions show the same error you have, though, and the phone is dead.
I have managed to resolve this with a lot of help from Vivanyok on 4pda.
1. Make a backup of your NVRAM and NVDATA, a full ROM backup if you can.
2. Download Oukitel K6000 Plus ROM v2.0. Only this version will work.
3. Flash it. It will actually work just fine, no errors. I've used the latest SPFT.
4. Boot the phone into Android. In Developer Options, enable OEM Unlock.
5. Reboot into fastboot, do fastboot oem unlock.
6. After this, you can simply flash any Ulefone ROM for Power 2. Win!
7. Restore NVRAM and NVDATA.
Hope this helps somebody.
Thanks for your reply!! I will try that and report back ! I'm so glad there are people out here who help !
EDIT: OMG, You are my hero!!! The Flash Process went just fine, no errors. It boots up. Thank you so much! Now i can flash like a devil again, haha
EDIT2: So i could use the phone with the oukitel rom but i want the original rom, firmware.
So here is the other Problem. I can't flash them. I either get insufficient buffer error or the imghdr error.
Could you link me what you are using? I really need the phone. Thanks for your help in advance.! :S
Hi sm00th4f3
I add some advices to Vivanyok instruction by red letters --->
I have managed to resolve this with a lot of help from Vivanyok on 4pda.
1. Make a backup of your NVRAM and NVDATA, a full ROM backup if you can.
2. Download Oukitel K6000 Plus ROM v2.0. Only this version will work.
3. Flash it. It will actually work just fine, no errors. I've used the latest SPFT.
4. Boot the phone into Android. In Developer Options, enable OEM Unlock.
5. Reboot into fastboot, do fastboot oem unlock.
OR enabled usb debug, accept connection between your PC and Ulephone and send command
fastboot reboot bootloader
after that
fastboot oem unlock
6. After this, you can simply flash any Ulefone ROM for Power 2. Win!
on this step i had a lot issue with insuffitient buffer under SP Flash tool, but yesterday i win too.
be careful :
after oem unlocking you should NOT reboot ulephone to Android,let phone stay connected to PC
try use #SPMultiPortFlashDownloadProject version 3.1620 - only this soft help me,earlier i tried v.3.1636 but always error appear.
and when i started flashing i stayed ulephone connected to usb (i dont disconnect phone after oem unlocking) and i simulated connection by long press volume UP + Power buttons. You can control connection by default PC sound.
due in SPMultiPortFlashDownloadProject other interface i did not change flashing type, it was firware update by default.
After that my ulefone become alive.
7. Restore NVRAM and NVDATA.
good luck, if any questions ask me on 4pda.ru
So, i tried your nice guide, and it finally worked!! Side Note is: After fastboot oem unlock you have to scan with the #SPMultiPortFlashDownloadProject version 3.1620 your phone first, and then like you have already said, use the volume up+power button combo to simulate a connection. and then it will be flashed. Holy crap. Thank you so much!!.
You are welcome, last three day i also tried flash my up2
Still same problem
..
---------- Post added at 01:21 PM ---------- Previous post was at 01:18 PM ----------
Hi there,
Thanks for the instructions. I have succeeded to install the Oukitel V2.0 ROM on my Ulefone Power 2 and change OEM in Android and fastboot but still no success to flash the final Ulefone Power 2 phone ROM from the Ulefone web site. The flash process starts but after two or three download steps the flash tool (3.1620 in administrator mode) stops still with the STATUS_SEC_IMGHDR_TYPE_MISMATCH error.
I have also tried with another ROM coming from another site, but still same error.
Could perhaps provide me a download link to a ROM that you successfully flashed to the Ulefone Power 2?
Thanks for your help
bletru said:
..
---------- Post added at 01:21 PM ---------- Previous post was at 01:18 PM ----------
Hi there,
Thanks for the instructions. I have succeeded to install the Oukitel V2.0 ROM on my Ulefone Power 2 and change OEM in Android and fastboot but still no success to flash the final Ulefone Power 2 phone ROM from the Ulefone web site. The flash process starts but after two or three download steps the flash tool (3.1620 in administrator mode) stops still with the STATUS_SEC_IMGHDR_TYPE_MISMATCH error.
I have also tried with another ROM coming from another site, but still same error.
Could perhaps provide me a download link to a ROM that you successfully flashed to the Ulefone Power 2?
Thanks for your help
Click to expand...
Click to collapse
Look in your inbox, i wrote you a private message.
bletru said:
..
---------- Post added at 01:21 PM ---------- Previous post was at 01:18 PM ----------
Hi there,
Thanks for the instructions. I have succeeded to install the Oukitel V2.0 ROM on my Ulefone Power 2 and change OEM in Android and fastboot but still no success to flash the final Ulefone Power 2 phone ROM from the Ulefone web site. The flash process starts but after two or three download steps the flash tool (3.1620 in administrator mode) stops still with the STATUS_SEC_IMGHDR_TYPE_MISMATCH error.
I have also tried with another ROM coming from another site, but still same error.
Could perhaps provide me a download link to a ROM that you successfully flashed to the Ulefone Power 2?
Thanks for your help
Click to expand...
Click to collapse
That will help many others like me.please post the ule stock rom you flashed and the flash tool.
SUNRAY888 said:
Hi sm00th4f3
I add some advices to Vivanyok instruction by red letters --->
I have managed to resolve this with a lot of help from Vivanyok on 4pda.
1. Make a backup of your NVRAM and NVDATA, a full ROM backup if you can.
2. Download Oukitel K6000 Plus ROM v2.0. Only this version will work.
3. Flash it. It will actually work just fine, no errors. I've used the latest SPFT.
4. Boot the phone into Android. In Developer Options, enable OEM Unlock.
5. Reboot into fastboot, do fastboot oem unlock.
OR enabled usb debug, accept connection between your PC and Ulephone and send command
fastboot reboot bootloader
after that
fastboot oem unlock
6. After this, you can simply flash any Ulefone ROM for Power 2. Win!
on this step i had a lot issue with insuffitient buffer under SP Flash tool, but yesterday i win too.
be careful :
after oem unlocking you should NOT reboot ulephone to Android,let phone stay connected to PC
try use #SPMultiPortFlashDownloadProject version 3.1620 - only this soft help me,earlier i tried v.3.1636 but always error appear.
and when i started flashing i stayed ulephone connected to usb (i dont disconnect phone after oem unlocking) and i simulated connection by long press volume UP + Power buttons. You can control connection by default PC sound.
due in SPMultiPortFlashDownloadProject other interface i did not change flashing type, it was firware update by default.
After that my ulefone become alive.
7. Restore NVRAM and NVDATA.
good luck, if any questions ask me on 4pda.ru
Click to expand...
Click to collapse
cannot find the up2 rom which can be flashed after flashing Oukitel K6000 Plus ROM. Please help...
Download Links added. There shouldn't be any problems using my method as long as you think as well.
Be aware that you have to use the Flashtool i linked, the exact same Flashtool Version as mentioned. Otherwise go to my german thread outside of xda to get more detailed pics.
solved my problem
this was the solution for me, thanks a lot....
recovered!
Hello guys! Thanks for the instructions, it worked great! Only thing, the fastboot you supplied has an password, so I used another I found online.
I finally got time to take care of my bricked Power 2 phone, and I got it back to life using the Oukitel method.
The phone works great, I only had to input IMEI numbers manualy.
Is there a need to lock back the bootloader, because now my device says "orange state", your device cannot be trusted?
hm hm.... fastboot allows me to lock the bootloader, but then the phone would reset itself to factory state for security reasons, so I will leave my bootloader unlocked, as I don't want to go trough the phone app installation and getting the settings to my taste
i just updated the zip..there shouldn't be a password anymore. ^^
For us, there isn't really a need to lock the bootloader. Since we can simply install every ota update by downloading the new rom from external sites. Just a reminder: don't use the ota update app since it will brick or just not work, since your bootloader is unlocked.
Ulefon power 2
ULEPHON POWER 2
Oukitel k6000 Plus Roma- ok
SPMultiPortFlashDownloadProject verziju 3.1620 FL-OK, DL FAIL ???? HELP HELP
[email protected]
brumen1 said:
ULEPHON POWER 2
Oukitel k6000 Plus Roma- ok
SPMultiPortFlashDownloadProject verziju 3.1620 FL-OK, DL FAIL ???? HELP HELP
[email protected]
Click to expand...
Click to collapse
don't forget to enable oem unlock (bootloader isn't unlocked yet after you do this)
then fast boot the phone with oukitel rom, unlock the bootloader with adb fast boot unlock
don't let go of the vol button while flashing the phone with multiport flash tools
don't use ulepfhone original cable, mine was not working ok although there was no visual damage to the cable. I used another one that fit the usb port on the phone more firmly
bad_ri said:
don't forget to enable oem unlock (bootloader isn't unlocked yet after you do this)
then fast boot the phone with oukitel rom, unlock the bootloader with adb fast boot unlock
don't let go of the vol button while flashing the phone with multiport flash tools
don't use ulepfhone original cable, mine was not working ok although there was no visual damage to the cable. I used another one that fit the usb port on the phone more firmly
Click to expand...
Click to collapse
The Original Cable is fine...the problem might only be with yours.
brumen1 said:
ULEPHON POWER 2
Oukitel k6000 Plus Roma- ok
SPMultiPortFlashDownloadProject verziju 3.1620 FL-OK, DL FAIL ???? HELP HELP
[email protected]
Click to expand...
Click to collapse
Read the thread, it's not that difficult.
sm00th4f3 said:
The Original Cable is fine...the problem might only be with yours.
Click to expand...
Click to collapse
maybe, just told what happened in my case, the original cable was bad from the first day
good luck with the flash
This is a last ditch effort to restore your phone to working order. This should only be used if your phone DOES NOT BOOT AT ALL or if you are unable to boot into FASTBOOT.
If you can boot into Fastboot mode then I would encourage you to flash using Mi Flash tool.
Original video credits: Om Bob Ombreker
Tools Needed:
MTK Bypass Tool
SP Flash Tools
Fastboot ROM ( Around 3GB Download)
PC and USB cable
Download files here:
Tested! Howto Unbrick Redmi 9C (angelica) without using auth account
This blog has move and will not be update again.For new update please open ▶▶
langithitam.wordpress.com
First you need to extract the MTK bypass tool which is crucial as it will allow us to flash without requiring Auth file. NOTE: you need to disable antivirus or it will delete file.
Your PHONE NEEDS TO BE OFF! There is no need to unplug battery from the phone, I tested it myself and as long as the phone is OFF it'll still work. If your phone cannot power down due to bootloop, then you must remove backcover and unplug battery or just wait till battery runs out.
Once you have started the MTK bypass tool, choose MTK6765 from option that says auto and this is only for Redmi 9C. Now press on the bypass button a ad it will wait for you to connect your phone via USB. DO NOT CONNECT YOUR PHONE PRIOR TO THIS. Hold only the VOLUME UP button when connecting the USB cable to your phone and ensure the phone is OFF. ONCE you connect the phone, it will immediately respond and show a log saying its completed (SEE SCREENSHOT BELOW).
Once this step is completed leave your phone connected as you will soon start the flashing process. Open up SP FLASH TOOLS and run as admin. You will need to load the scatter file which is included in the Fastboot ROM under images folder. Once you have the scatter file loaded, SP tools will proceed to load all image files which will be used to flash phone so be patient.
Ensure that DOWNLOAD ONLY option is chosen as format and download option will format your IMEI also. Once all files have been loaded then just press the DOOWNLOAD button and wait to complete. Once done you can power ON the phone and it should boot.
Very good guide.
Thank you very much
No problem hope it'll help a few guys out there sure helped me a lot
Thanks 100% it worked for me
Munemugo said:
Thanks 100% it worked for me
Click to expand...
Click to collapse
Cool glad I could help
I'm using a Redmi 9c I tried to unlock it but failed in the process. Later I get absolutely no response from the phone, I cant open fast boot or recovery. I tried connecting it to the pc but it shows the same exact problem you are facing. I tried all USB ports and switched cables back and forth but no success. I tried pressing volume up, down and all sorts of combinations, still no success. Any fix for this?
Cat8191 said:
I'm using a Redmi 9c I tried to unlock it but failed in the process. Later I get absolutely no response from the phone, I cant open fast boot or recovery. I tried connecting it to the pc but it shows the same exact problem you are facing. I tried all USB ports and switched cables back and forth but no success. I tried pressing volume up, down and all sorts of combinations, still no success. Any fix for this?
Click to expand...
Click to collapse
Follow the guide step by step, it should work and if doesn't then you should try disconnecting the battery
great guide on fixing a hard brick.
My compliments and thank you very much indeed to you for writing this very good and detailed guide. My Redmi 9c bootlooped after trying to install Lineage OS, of course no way to go to fastboot mode anymore (I'm a rather experienced custom ROM installer though). Although I asked for help in a separate thread, I got no answer for a couple of months now until I found this thread. I never gave up my Redmi 9C so I now followed you instructions and with success!! I will refer people to your thread of course. There is no doubt many can save their phone by reading you instructions.
JoostA said:
My compliments and thank you very much indeed to you for writing this very good and detailed guide. My Redmi 9c bootlooped after trying to install Lineage OS, of course no way to go to fastboot mode anymore (I'm a rather experienced custom ROM installer though). Although I asked for help in a separate thread, I got no answer for a couple of months now until I found this thread. I never gave up my Redmi 9C so I now followed you instructions and with success!! I will refer people to your thread of course. There is no doubt many can save their phone by reading you instructions.
Click to expand...
Click to collapse
Thanks my guy appreciate the appreciation. Glad I could help
Dawood99 said:
This is a last ditch effort to restore your phone to working order. This should only be used if your phone DOES NOT BOOT AT ALL or if you are unable to boot into FASTBOOT.
If you can boot into Fastboot mode then I would encourage you to flash using Mi Flash tool.
Original video credits: Om Bob Ombreker
Tools Needed:
MTK Bypass Tool
SP Flash Tools
Fastboot ROM ( Around 3GB Download)
PC and USB cable
Download files here:
Tested! Howto Unbrick Redmi 9C (angelica) without using auth account
This blog has move and will not be update again.For new update please open ▶▶
langithitam.wordpress.com
First you need to extract the MTK bypass tool which is crucial as it will allow us to flash without requiring Auth file. NOTE: you need to disable antivirus or it will delete file.
Your PHONE NEEDS TO BE OFF! There is no need to unplug battery from the phone, I tested it myself and as long as the phone is OFF it'll still work. If your phone cannot power down due to bootloop, then you must remove backcover and unplug battery or just wait till battery runs out.
Once you have started the MTK bypass tool, choose MTK6765 from option that says auto and this is only for Redmi 9C. Now press on the bypass button a ad it will wait for you to connect your phone via USB. DO NOT CONNECT YOUR PHONE PRIOR TO THIS. Hold only the VOLUME UP button when connecting the USB cable to your phone and ensure the phone is OFF. ONCE you connect the phone, it will immediately respond and show a log saying its completed (SEE SCREENSHOT BELOW).
Once this step is completed leave your phone connected as you will soon start the flashing process. Open up SP FLASH TOOLS and run as admin. You will need to load the scatter file which is included in the Fastboot ROM under images folder. Once you have the scatter file loaded, SP tools will proceed to load all image files which will be used to flash phone so be patient.
Ensure that DOWNLOAD ONLY option is chosen as format and download option will format your IMEI also. Once all files have been loaded then just press the DOOWNLOAD button and wait to complete. Once done you can power ON the phone and it should boot.
Click to expand...
Click to collapse
I can do this for a Redmi 9a?
Using the same download agent
Hello, i did it but i did the mistake to do a FORMAT AND DOWNLOAD.
No my phone juste diplsay the Redmi logo a few second then power off.
I'm still able to go on the Sp Flash Tools and flash again. Anyone could help me please ?
hello sir so i recently hard bricked my redmi 9c nfc by installing older MIUI version that it came with. It was just black screen all the time and nothing. Tried this guide, mtk bypass tool worked but on sp flash tools i am greeted with this message.
Everything is acting like expected according to the video, but wheb I have used the mediatek bypass tool with green OK and stuff and when i start to press download on the smart phone flash tool, it just stucks at 0. Nothing happens, except that everything is greyed out and is trying to load it. If i boot my phone myself with the brom it says hint:add a authentication file or ask for help. I cant manage to finish it.
The error in Mediatek bypass tool about handshaking error is probably because i did it several times, because i didnt manage to load smartphone flash tool as attached below
This is my last hope to recover my brandew phone. Thanks for the good tutorial, but it didt work out. If someone could save me then I would be grateful
erikmanner said:
Everything is acting like expected according to the video, but wheb I have used the mediatek bypass tool with green OK and stuff and when i start to press download on the smart phone flash tool, it just stucks at 0. Nothing happens, except that everything is greyed out and is trying to load it. If i boot my phone myself with the brom it says hint:add a authentication file or ask for help. I cant manage to finish it.
The error in Mediatek bypass tool about handshaking error is probably because i did it several times, because i didnt manage to load smartphone flash tool as attached below
This is my last hope to recover my brandew phone. Thanks for the good tutorial, but it didt work out. If someone could save me then I would be grateful
Click to expand...
Click to collapse
I had exactly the same issue, go into the me
Go into the options menu and go to connections, then select usb, then do the steps as is
Dawood99 said:
This is a last ditch effort to restore your phone to working order. This should only be used if your phone DOES NOT BOOT AT ALL or if you are unable to boot into FASTBOOT.
If you can boot into Fastboot mode then I would encourage you to flash using Mi Flash tool.
Original video credits: Om Bob Ombreker
Tools Needed:
MTK Bypass Tool
SP Flash Tools
Fastboot ROM ( Around 3GB Download)
PC and USB cable
Download files here:
Tested! Howto Unbrick Redmi 9C (angelica) without using auth account
This blog has move and will not be update again.For new update please open ▶▶
langithitam.wordpress.com
First you need to extract the MTK bypass tool which is crucial as it will allow us to flash without requiring Auth file. NOTE: you need to disable antivirus or it will delete file.
Your PHONE NEEDS TO BE OFF! There is no need to unplug battery from the phone, I tested it myself and as long as the phone is OFF it'll still work. If your phone cannot power down due to bootloop, then you must remove backcover and unplug battery or just wait till battery runs out.
Once you have started the MTK bypass tool, choose MTK6765 from option that says auto and this is only for Redmi 9C. Now press on the bypass button a ad it will wait for you to connect your phone via USB. DO NOT CONNECT YOUR PHONE PRIOR TO THIS. Hold only the VOLUME UP button when connecting the USB cable to your phone and ensure the phone is OFF. ONCE you connect the phone, it will immediately respond and show a log saying its completed (SEE SCREENSHOT BELOW).
Once this step is completed leave your phone connected as you will soon start the flashing process. Open up SP FLASH TOOLS and run as admin. You will need to load the scatter file which is included in the Fastboot ROM under images folder. Once you have the scatter file loaded, SP tools will proceed to load all image files which will be used to flash phone so be patient.
Ensure that DOWNLOAD ONLY option is chosen as format and download option will format your IMEI also. Once all files have been loaded then just press the DOOWNLOAD button and wait to complete. Once done you can power ON the phone and it should boot.
Click to expand...
Click to collapse
I cannot thank you enough, thank you for putting this here
Works with some tweaks but got it running
Thank You soooo much for this tutorial, it worked for me and saved me alot of trouble.
i want to ask one thing: can this method be used on a locked bootloader?
Mr.PotatoChips said:
Thank You soooo much for this tutorial, it worked for me and saved me alot of trouble.
i want to ask one thing: can this method be used on a locked bootloader?
Click to expand...
Click to collapse
yes
I need help, after I used the Bypass MTK, my phone became unrecognizable by windows. It says Unknown USB Device.
bbboy4life said:
I need help, after I used the Bypass MTK, my phone became unrecognizable by windows. It says Unknown USB Device.
Click to expand...
Click to collapse
Install usb dk drivers 32bit or 64bit, install usb win32 tool