The Mega 6.3: There and Back Again! - Samsung Galaxy Mega

I hope you LOTR fans enjoyed that title.
So my little adventure has come to an end after stupidly and regrettably selling my previous i9200 Mega and for the last 3 months I was using a N1
But now I'm back on the Mega i9200 again! Oh boy. After using the N1 for so long, this thing again feels as ginormous as it did the first time I got it.
Once again this device feels like home to me again. Will all its good and bad points. :good:
And it seems the community/developing still is in the low side, but hey, I knew it was going to be like this anyway. Niche device.
Anyway to get on point, as I said I got another Mega i9200 and it seems its a French version.
Rom/build: JDQ39.I9200UBUCNA2 BB: I9200UBUCNA2 and my main concern its that it has the new fricking KNOX bootloader.
So I have been reading about how to root it without tripping KNOX and the only thing I find is the below thread from ValenteL.
ROM I9205XXUCML1 (Whit KNOX) <> [16/01] New ROM I9205XXUCNA2 (How to Root)
Here whats been bothering me:
1: So, is there any way to root the Mega without tripping the KNOX counter?
2: And why the HELL does this french version Mega i9200 scores 9300 in Quadrant while my previous Saudi Arabia version Mega i9200 score barely 7300?!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

When i got my mega i had also around 7300 points, when i updated to the new firmware i have now 9300+ points. And yea developing for our lovley mega is very bad :/ i had before galaxy note 1 n7000 omg so many roms and mods...

This is how I did my AT&T version,and I have it rooted with Kingo Android root...I did a clean install of the rom with Odin..I then applied to the Kingo root then went to super user,and it will ask if you want to disable knox and chose yes..After I disabled Knox..I rebooted and used Titanium Back and made back ups of the knox applications and cleared data on all..Then I uninstalled all signs of knox with Titanium and rebooted once more...Then I powered completely down..and went in to the bootloader...Still says official..and no custom lock icon shows up at boot...

D4dan said:
When i got my mega i had also around 7300 points, when i updated to the new firmware i have now 9300+ points. And yea developing for our lovley mega is very bad :/ i had before galaxy note 1 n7000 omg so many roms and mods...
Click to expand...
Click to collapse
So its running as it should. Good.
Surgeman said:
This is how I did my AT&T version,and I have it rooted with Kingo Android root...I did a clean install of the rom with Odin..I then applied to the Kingo root then went to super user,and it will ask if you want to disable knox and chose yes..After I disabled Knox..I rebooted and used Titanium Back and made back ups of the knox applications and cleared data on all..Then I uninstalled all signs of knox with Titanium and rebooted once more...Then I powered completely down..and went in to the bootloader...Still says official..and no custom lock icon shows up at boot...
Click to expand...
Click to collapse
Thanks Surgeman. I will give Kingo a look. :good:

Surgeman said:
This is how I did my AT&T version,and I have it rooted with Kingo Android root...I did a clean install of the rom with Odin..I then applied to the Kingo root then went to super user,and it will ask if you want to disable knox and chose yes..After I disabled Knox..I rebooted and used Titanium Back and made back ups of the knox applications and cleared data on all..Then I uninstalled all signs of knox with Titanium and rebooted once more...Then I powered completely down..and went in to the bootloader...Still says official..and no custom lock icon shows up at boot...
Click to expand...
Click to collapse
Hmm. I'm sure you pressed yes. But that "definitely void warranty" is worrying.
Is your KNOX flag in download mode at 0x0 or 0x1?

I have 0x30 but that was before I stumbled across how to keep it from counting higher...Before it was showing system status custom in the bootloader I reflashed fresh with Odin to stock and then re-rooted and did the procedure I explained..Still shows official and no custom lock icon pops up when turned on...Oh...remember I have the AT&T version also and there's not in CWM's or safe straps for the SGH-I527..

I like black color mega 6.3

Related

[Q] Root a possible rooted phone?

Hi all!
I am exceptionally new here, especially with Android. I've been a long time Blackberry user and the difference between both OS are really different. Felt like a grandma using this phone.
But anyway, I've done a lot of research and reading on this forum about upgrading firmware, rooting and etc. but still have questions that need to be clarified.
I have purchased a GS2 from a store that gets their phones from overseas. Thus my phone is not from a carrier and is from a different country.
I tried upgrading my firmware using Kies but it's not allowing me:
"This version of the device cannot be updated"
I know for sure there's new firmwares to be updated as I have owned another GS2 before this one and it was fine at updating through Kies. I had to return it for a burnt image (that can be for another thread).
Here's my phone's info:
PDA: I9100ZSKF1
PHONE: I9100XXKE4
CSC: I9100OZSKE7
kernel: 2.6.35.7-i9100ZSKF1-CL225635 [email protected] #6
Not sure if this is related or not but when I first turned on the phone, everything was in Spanish and had no choice in the Language option to change to Chinese (just in case but I use English normally). So I asked the boss of the store how can I get Chinese on this thing? So he just took the phone and did his magic. I was waiting for about half an hour, he gave it back to me and everything was in Chinese. Changed it back to English, went home and played around with it. Realized I have a Super User app in my app drawer. I was suspecting that the boss rooted my phone just to get the Chinese language on. Because for sure it would not come stock.
So my big question is, if this phone is/was indeed rooted, how do I check? If I root not knowing that this is rooted already, would there be any problems that may arise?
Kernel wise, since this phone was originally in Spanish, it wouldn't make sense to have a China/Hong Kong kernel. Does it? I'm so new at this that I don't know if kernel's country make any difference. Oh yeah, I don't even have a freaking warranty card for this phone, I guess I wouldn't even have Samsung's warranty.
Thanks in advance. And sorry for the long post...
shirbo.g said:
So my big question is, if this phone is/was indeed rooted, how do I check?
Click to expand...
Click to collapse
Do you have a superuser icon in your app drawer? If yes then you're rooted.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If I root not knowing that this is rooted already, would there be any problems that may arise?
Click to expand...
Click to collapse
You root by flashing a cf-root kernel, flashing it again wont cause any issues at all.
I wouldn't worry about origin of kernel's.
App from market called root checker.
Helps diagnose any problems too.
Sent from my GT-I9100 using XDA App
shirbo.g said:
Hi all!
I have purchased a GS2 from a store that gets their phones from overseas. Thus my phone is not from a carrier and is from a different country.
I tried upgrading my firmware using Kies but it's not allowing me:
Either phone provider has no update or the model code has no update .
Updates are vendor and country specific release not worldwide .
Not sure if this is related or not but when I first turned on the phone, everything was in Spanish and had no choice in the Language option to change to Chinese (just in case but I use English normally). So I asked the boss of the store how can I get Chinese on this thing? So he just took the phone and did his magic. I was waiting for about half an hour, he gave it back to me and everything was in Chinese. Changed it back to English, went home and played around with it. Realized I have a Super User app in my app drawer. I was suspecting that the boss rooted my phone just to get the Chinese language on. Because for sure it would not come stock.
Root does not install language .
So my big question is, if this phone is/was indeed rooted, how do I check? If I root not knowing that this is rooted already, would there be any problems that may arise?
Not normally you require KF1 root
. Oh yeah, I don't even have a freaking warranty card for this phone, I guess I wouldn't even have Samsung's warranty.
Root = no warranty .
Looks to me like you have had China/Hong Kong firmware flashed = ZS code in the store . Kies update route probably now blocked as phone codes dont match .
Guide
http://forum.xda-developers.com/showthread.php?t=1125282
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
Click to expand...
Click to collapse
Thanks for the prompt reply guys. I downloaded Titanium backup to check (as out needed root access in order to work) and it said I did! Lol the boss saved me from rooting myself.
Thanks again for all the helpful resources.
Sent from my GT-I9100 using XDA App

[Q] Can't OTA tripped knox

So I got a little carried away and went with the root method here on XDA using Odin, effectively tripping knox.
I've had the phone for about an hour. Well I didn't do an OTA update before rooting. I am currently on MI3. I would like to update to at least MI5 or whatever version gives the better call quality and can apply the free tether patch.
Does anyone have any suggestions?
I've scoured the web for the past 30 minutes and yet to find any working updates...they are all broken links. Please someone give me some guidance.
Thanks,
Jason
deepend said:
So I got a little carried away and went with the root method here on XDA using Odin, effectively tripping knox.
I've had the phone for about an hour. Well I didn't do an OTA update before rooting. I am currently on MI3. I would like to update to at least MI5 or whatever version gives the better call quality and can apply the free tether patch.
Does anyone have any suggestions?
I've scoured the web for the past 30 minutes and yet to find any working updates...they are all broken links. Please someone give me some guidance.
Thanks,
Jason
Click to expand...
Click to collapse
Did you try MJ4 latest http://forum.xda-developers.com/showthread.php?t=2549035
Or wait until 4.4.2 is released to the public, which is been dissected by @freeza look here http://forum.xda-developers.com/showthread.php?t=2630514
Thanks man!
You are a life saver.
This won't untrip knox will it?
deepend said:
You are a life saver.
This won't untrip knox will it?
Click to expand...
Click to collapse
The Odin TAR will get you back to Stock MJ4,MJ4 is the latest OTA update.
NO they is no Knox resetter available , YET!!! There is a ongoing Bounty for Knox 0x0 Restet see here http://forum.xda-developers.com/showthread.php?t=2486346
Also there are some claims that their Knox counter has been reseted in or under 10 mins after a trip to Sprint/Samsung Repair Shop. The Service Person DID notice the 0x1 warranty bit but offer to "fix it" ( maybe they knew each other, customer and Service person?)
See here http://forum.xda-developers.com/showthread.php?t=2504258
You do have to check because I do not know if with a tripped Knox 0x1 you are able to upgrade to new boot loader without problems, I believe i have read somewhere about that been a "Feature" of Knox, just make sure maybe someone with more knowledge on the matter can pitch in on this. or maybe it only apply to updates over Kies and does not matter on Odin.
slow_one said:
The Odin TAR will get you back to Stock MJ4,MJ4 is the latest OTA update.
NO they is no Knox resetter available , YET!!! There is a ongoing Bounty for Knox 0x0 Restet see here http://forum.xda-developers.com/showthread.php?t=2486346
Also there are some claims that their Knox counter has been reseted in or under 10 mins after a trip to Sprint/Samsung Repair Shop. The Service Person DID notice the 0x1 warranty bit but offer to "fix it" ( maybe they knew each other, customer and Service person?)
See here http://forum.xda-developers.com/showthread.php?t=2504258
You do have to check because I do not know if with a tripped Knox 0x1 you are able to upgrade to new boot loader without problems, I believe i have read somewhere about that been a "Feature" of Knox, just make sure maybe someone with more knowledge on the matter can pitch in on this. or maybe it only apply to updates over Kies and does not matter on Odin.
Click to expand...
Click to collapse
So I was able to get Stock MJ4, then I went back in with the same Odin3 CF-Auto Root I used before and it doesn't seem to be rooting now. Everything is working fine except for things that require root of course. It completely hung up the first time, then it went through the second time but didn't install supersu properly. Need to do some reading.
deepend said:
So I was able to get Stock MJ4, then I went back in with the same Odin3 CF-Auto Root I used before and it doesn't seem to be rooting now. Everything is working fine except for things that require root of course. It completely hung up the first time, then it went through the second time but didn't install supersu properly. Need to do some reading.
Click to expand...
Click to collapse
Have you tried installing SuperSU from Play Store?
Sent from my SM-N900P using Tapatalk
This is from chainfire's OP about 4th paragraph..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N900P using Tapatalk

Help ROOT new firmware

Hi I want to install a custom rom on my mega since Touchwiz isn't that great. The last time I tried to root, I hard bricked. I'm too scared to try again so can any one tell me if I'm OK to root or shall I wait for new root kernel or something like that. I've done this kind of stuff on my old S2 and my Nexus 7 but I'm new to the way to Mega works, so can anyone tell me a link or tell me it's OK to root with my recently updated firmware. Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-I9200 using Tapatalk
ianneo said:
Hi I want to install a custom rom on my mega since Touchwiz isn't that great. The last time I tried to root, I hard bricked. I'm too scared to try again so can any one tell me if I'm OK to root or shall I wait for new root kernel or something like that. I've done this kind of stuff on my old S2 and my Nexus 7 but I'm new to the way to Mega works, so can anyone tell me a link or tell me it's OK to root with my recently updated firmware. Thanks
Sent from my GT-I9200 using Tapatalk
Click to expand...
Click to collapse
Did you ever try Kingo Android Root as you install it on your pc and just follow the info in the program, it is easy to use and works very well on rooting many different models of Samsung phones.
You can't. You are running knox enabled firmware. You try to flash custom recovery, you'll brick again afaik.
Try this if you are bold.
http://forum.xda-developers.com/showthread.php?t=2574953
Oh okay do not root then as i didn't notice that the knox security is present, but i see now it is..sorry about that and thanks @Silesh.Nair for noticing that. :good:
@Silesh.Nair
I hate this new firmware GT I9200 XXUCNA5 XSE ( Indonesian ), any idea how to downgrade??? I still could use CWM to format/system and when finished flash XXUBMJ4 XSE and Secure FAIL : Kernel show up, then I flash again XXUCNA5 and back to normal again, and I flash CWM 6.0.3.2 and super su 1.93 and not busybox included, my factory app MAPS and YOUTUBE stop working and everytime I restart my I9200 at first on must wait until MAPS and YOUTUBE pop up UNFORTUNATELY ... HAS STOP WORKING, then I could use my device. This Real annoying, even I have disabled those things at application manager, my mind always being a terror that there were 2 app couldn't be used, just affraid I need them in the future.
Any Idea Silesh.Nair???
What's your reccomendation for CWM and Super SU???
I don't want to use CWM 6.0.4.7 coz a terrible interface and function, Now I still use CWM 6.0.3.2
I Really Regret for upgrading to XXUCNA5, if there's a way to rollback to XXUBMJ4, I will do it.
Thank You So Much Silesh.Nair
I don't think you can go back to any older firmware, not even a nandroid backup. Sorry man, I think you are stuck with it.
I am not an expert on knox, so I'll keep looking if there is a way out. I used the stock firmware only for 5 minutes after I got my phone. Its been custom roms all along.
---------- Post added at 10:25 PM ---------- Previous post was at 10:03 PM ----------
For your maps and YouTube issue, Valentel asks you to remove them from the system folder and then download from playstore.
Sent from my GT-I9205 using Tapatalk
Silesh.Nair said:
I don't think you can go back to any older firmware, not even a nandroid backup. Sorry man, I think you are stuck with it.
I am not an expert on knox, so I'll keep looking if there is a way out. I used the stock firmware only for 5 minutes after I got my phone. Its been custom roms all along.
Click to expand...
Click to collapse
As for now there is NO WAY to go back when one upgrade to KNOX-ed firmware. This is hardware driven thing, so forget... and enjoy your new shiny firmware with KNOX on behind... It's really pitty so that many people do not read nothing about theirs expensive phones before trying something unrecoverable, sometimes the very second day after purchasing... I will always try to help, but in this case there is nothing to do.
trurl3 said:
As for now there is NO WAY to go back when one upgrade to KNOX-ed firmware. This is hardware driven thing, so forget... and enjoy your new shiny firmware with KNOX on behind... It's really pitty so that many people do not read nothing about theirs expensive phones before trying something unrecoverable, sometimes the very second day after purchasing... I will always try to help, but in this case there is nothing to do.
Click to expand...
Click to collapse
Well, we're just going to have to wait for Kit Kat. Hurry up Samsung!
Sent from my GT-I9200 using Tapatalk

knox notification manager in grand 2 after kitkat update!

Samsung has bundled its software update with knox security system so now we all r set to have our root counter start if root gets available.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yup it get count how to reset
rishabh_0895 said:
Samsung has bundled its software update with knox security system so now we all r set to have our root counter start if root gets available.
Click to expand...
Click to collapse
how to reset it?
use knox remover tool!
knox removeable tool
rishabh_0895 said:
use knox remover tool!
Click to expand...
Click to collapse
what it do?? do it reset that counting how many times get flashed by cwm?
rishabh_0895 said:
Samsung has bundled its software update with knox security system so now we all r set to have our root counter start if root gets available.
Click to expand...
Click to collapse
I updated my grand 2 to 4.4.2. But I found slow net issues.
Then I try to back to 4.3 jellybean. But I flash again by odin.
But suddenly hang in updating. I remove battery. But I put battery now my phone not charge not going to on .
I use many methods to make again download mode. But fail.
I make jtag but fail no boot.
Please give me any way to put back my grand 2 in normal position.
Please help please
hi
is your phone display samsung logo? i just downgrade G8 to G4 yesterday and facing the big problem like you, I remove battery for some hours and after that.......... "I open odin + add stock Rom G8" while "I plug my phone with battery to my PC + hold home button + volume down button"... so my phone display Download Mode.. It's relly amazing...I can flash G8 rom and using normally :cyclops:
drrami75 said:
I updated my grand 2 to 4.4.2. But I found slow net issues.
Then I try to back to 4.3 jellybean. But I flash again by odin.
But suddenly hang in updating. I remove battery. But I put battery now my phone not charge not going to on .
I use many methods to make again download mode. But fail.
I make jtag but fail no boot.
Please give me any way to put back my grand 2 in normal position.
Please help please
Click to expand...
Click to collapse
if it does not go to download mode or recovery, the only option is to take it to Samsung Service, tell them that you were trying to upgrade with Samsung kies, PC conked off and you are stuck.
If it is under warranty they will replace the motherboard for you.
Please click on the thanks button if you think I helped
schubeir
Hi yesterday i have updated grand galaxy 2 and i am facing problem in knox when i open knok its showing a message on screen "please wait" and after that it shutted down automatically . I tried too open it many times, but i think i have do big mistake to get it flashed. please help me .

[root] T-Mobile Galaxy Tab 4 8.0 T337

Confirmed working root method made by chainfire.
OS Version: 4.4.2
Build:KOT49H.T337TUVU1ANF4
Model: SM-T337T
Kernel:3.4.0 date-jun 18
Download: http://download.chainfire.eu/462/CF-...mo-smt337t.zip
Instructions: http://autoroot.chainfire.eu/
This did trigger KNOX however SuperSU disabled it.
Towelroot does the same for the 337a without tripping knox bit. Did it not work for the 337t?
Unless its been updated, i tried about a week ago and and it wouldmt work on the 337t
Sent from my Nexus 5 using XDA Free mobile app
would reflashing stock bootloader and recovery reset the KNOX?
Sent from my Nexus 5 using XDA Free mobile app
HighRidas said:
would reflashing stock bootloader and recovery reset the KNOX?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
No, unfortunately once knox is tripped, it can't be reset. I'm pretty sure the 337 a and t are identical except for bloat and frequencies and I just used towelroot on mine today. Mines the a
I get "your device is not supported" what mod strings did you use Ive tried a few with no success. also, what kernel are you on ive read the some kernels (may 2014) worked but the one I have (jun 2014) did not
My kernel is here. Didn't use any special strings, just downloaded, installed and pushed the make it rain button.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I went into SuperSU after I rooted my SM-T330NU with CF-Auto-Root and it asked me if I wanted to disable knox - I said yes and it disabled it. I also installed Wanam Xposed and used the Security Hacks feature and Faked the system status to be set to "Official". I also deleted several of the knox system apps with Rom Toolbox Pro and it works great. I can still get OTA update from Samsung and no knox messages and knox is not tripped.
when t-mobile tab 4 was released it had a newer baseband n kernel than the other tab 4 devices, thats why towelroot doesn't work on it.
this was discuss in this thread, http://forum.xda-developers.com/tab-4/help/sm-t337t-looking-root-method-t2853724
Does this method alow install custom recovery on t330nu?
I used towelroot and got root access but no luck with a custom recovery such as cwm or twrp would this help or is there any way for custom recovery on t330nu?
Leonidas87 said:
Does this method alow install custom recovery on t330nu?
I used towelroot and got root access but no luck with a custom recovery such as cwm or twrp would this help or is there any way for custom recovery on t330nu?
Click to expand...
Click to collapse
I'm not aware of any recovery for any of the 8" Tab 4 models.
If you root and an recovery becomes available (someone needs to make it) you should be able to install it.
raitchison said:
I'm not aware of any recovery for any of the 8" Tab 4 models.
If you root and an recovery becomes available (someone needs to make it) you should be able to install it.
Click to expand...
Click to collapse
This method only works for the t337t. Chainfire makes all of his root methods by Model and uses stock recovery
8" recoveries should be on their way soon.
Source files have been found and recoveries are in the making.
Leonidas87 said:
Source files have been found and recoveries are in the making.
Click to expand...
Click to collapse
any updates for the recovery yet? Thank you inn advance
thealbundy said:
any updates for the recovery yet? Thank you inn advance
Click to expand...
Click to collapse
We have a few developers looking into it. We have distributed some necessary files for the device. Just need to be patient and work together. All is in motion as for a few days ago nothing was really in motion.
Everyone should stay positive, patient and in due time we should all be happy. All thanks and recognition will be made known upon completion. Thanks to everyone helping out great work so far.
Leonidas87 said:
We have a few developers looking into it. We have distributed some necessary files for the device. Just need to be patient and work together. All is in motion as for a few days ago nothing was really in motion.
Everyone should stay positive, patient and in due time we should all be happy. All thanks and recognition will be made known upon completion. Thanks to everyone helping out great work so far.
Click to expand...
Click to collapse
Thank you very much for this update. I can't wait till the custom recovery gets here for the t337t model
thealbundy said:
Thank you very much for this update. I can't wait till the custom recovery gets here for the t337t model
Click to expand...
Click to collapse
Any news for the custom recovery for the 8.0 yet?
pre4speed said:
Towelroot does the same for the 337a without tripping knox bit. Did it not work for the 337t?
Click to expand...
Click to collapse
Towelroot doesn't work on mine.
Sent from my SAMSUNG-SM-T337A using XDA Free mobile app

Categories

Resources