I have put this rom on my Tab P7510 Wifi and I have some problems. Interruption Hangoot, Web sometime not see the pasge, I am connected and I see just 1 min and stop. I have install gapps http://forum.xda-developers.com/showthread.php?t=2397942 that I take here.
I have made instal again
Wipe data factory reset
Wipe cache partition
Wipe dalvik cache dans Advanced
and the problem is always the same.
Thank you for your help
Related
Im using a galaxy s2 with Lite'ning rom (android 4). But i couldnt resist the MIUI UI (android 2) so decided to change to it. I placed my zip files in the internal storage and reboot CWM to install the zip. But to no avail, my phone gets stuck in boot loop twice. so im wondering is it because of the different android version that my phone refuse to boot? How can I overcome it to install MIUI?
Thanks in advanced
Did you do a full wipe?
- Reboot in CWM
- Wipe data/factory reset
- Wipe Cache
- Wipe Dalvik Cache
- Flash MIUI.zip
Draak22 said:
Did you do a full wipe?
- Reboot in CWM
- Wipe data/factory reset
- Wipe Cache
- Wipe Dalvik Cache
- Flash MIUI.zip
Click to expand...
Click to collapse
I missed the Wipe Dalvik Cache. Will try again later. Thanks for your help ^^
Draak22 said:
Did you do a full wipe?
- Reboot in CWM
- Wipe data/factory reset
- Wipe Cache
- Wipe Dalvik Cache
- Flash MIUI.zip
Click to expand...
Click to collapse
I did all of this and it still loops at welcome screen T_T
- Reboot in CWM
- Wipe data/factory reset
- Wipe Cache
- Wipe Dalvik Cache
- /format system
- Flash MIUI.zip
I would throw /format system at the end.
Its under mounts and storage in your CWM menu
Chakker3D said:
- Reboot in CWM
- Wipe data/factory reset
- Wipe Cache
- Wipe Dalvik Cache
- /format system
- Flash MIUI.zip
I would throw /format system at the end.
Its under mounts and storage in your CWM menu
Click to expand...
Click to collapse
still fails. everytime it bootloop, i need to use odin to install lite'ning to enter CWM again
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware or even your original firmware .
Still fails install old bootloader .
jje
hi
hi there
here is the best way solve ur problem as this has happened to me as-well,
first thing is download the stock rom form sammobile.com, then flash it using odin and then re-root and install CWM then install Miui Rom, if ur still stuck in the boot-loop then do a full wipe, if still stock, then try a deferent miui rom customized here is whet i have in my phone and its amazing and fast and batter saver for me,
MIUISP V.12 by Dragon
i hope this was helpful for you
Regards
iMatrix
Hi,
I'm currently using the RR ICS v2.6 on my phone with a Iron Man lockscreen MOD.
After I flashed the new RR ICS v2.7 ROM, my phone can't boot up. It just stays at the screen with the Sieya kernal logo.
I flashed the ROM two time. First time I didn't wipe data/ factory reset. Second time I followed exactly what the instruction said. But both of them failed.
I had to flash back to a Stock ROM in order for my phone to boot up.
Anyone can help? I can't reply directly to the thread in the android development because I'm a new user.
Think this should be in Q&A section, however did your do full wipe. also try formatting system ect from mounts and storages in recovery. I'm no expert just helping
Sent from my GT-I9100 using Tapatalk 2
desiresiscool said:
Think this should be in Q&A section, however did your do full wipe. also try formatting system ect from mounts and storages in recovery. I'm no expert just helping
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
hi, thanks for your reply, but i want to make sure what the exact issue it is before i flash it again. I was so scared when my phone cant boot up as i thought that i bricked my phone.
If you don't mind, can you help me link this thread to the RR thread in the Galaxy s II android development?
Still no one can help?
It seems to me that most of the people that successfully flashed v2.7 are from v2.6.1. So, I'm thinking of updating my v2.6 to v2.6.1 then flash the v2.7. However, I can't find any download link for v2.6.1.
NVM, I found the download link for 2.6.1
It is actually in the RR thread but I just didn't recognize the links under "google drive" or "dropbox" or others are download links before.
yah I updated my sgs2 to rr 2.7 rom now.
Here's what I did:
-I first have v2.6 installed on my phone
-go into recovery mode
-Wipe Dalvik Cache
-Fix Permissions
-Wipe Cache Partition
-NOTE: I didn't Wipe data / factory reset
-flash v2.6.1 from SD card
-go back to recovery mode after aroma installation
-Wipe Dalvik Cache
-Fix Permissions
-Wipe Cache Partition
-reboot and I now have v2.6.1 installed
-go into recovery mode
-Wipe Dalvik Cache
-Fix Permissions
-Wipe Cache Partition
-NOTE: I didn't Wipe data / factory reset
-flash v2.7 from SD card
-go back to recovery mode after aroma installation
-Wipe Dalvik Cache
-Fix Permissions
-Wipe Cache Partition
-reboot and I now have v2.7 installed
I'm now thinking about changing my kernel from siyah to dorimanx. Can anyone give me some pros and cons about these two kernels?
Hello!
I've been having really really weird problems with my phone and CWM.
Right now I have latest stable CM installed.
Today I decided to switch to ParanoidAndroid.
I got the right ROM, but I installed the wrong google apps the 4.2.2 one.
Now I get a crash when I try to use the keyboard so I decided to flash it again.
I went back into CWM.
Factory reset, deleted cache, wiped dalvik cache.
Installed the same .zip file I did the first time for Paranoid Android except I didn't install Google Apps.
I restart the phone and it doesn't seem to have flashed, it's the one with 4.2.2 GAPPS.
I've tried wiping it 3 times.
I decided to check internal storage on my phone and this is what I see.
I don't think it's supposed to look like this after I just did a factory reset. Right?
http :// puu.sh/5gzsb.png
http :// puu.sh/5gzsR.png
(I can't post links yet)
Right now I just want to hard reset my phone and install PA.
EDIT: I just Factory Reset, Wiped Cache and dalvik restarted my phone and I'm back to the PA ROM with GAPPS 4.2.2
via CWM
go to mounts & storage >> Format system
then
wipe data/factory reset
wipe dalvik cache
flash ROM
Flash Gapps
Flash Desired kernel (if any)
Reboot
everything should be Fine
And for next time I suggest you use philz recovery, it has a clean install options in wipe data/factory reset, it should help you
Hello,
I updated my CM 10 to CM 11 and forget to flash the new Gapps for CM 11.
Now my phone everytime say's: "Einrichtungsassistent" wurde beendet.
thats german for Setup wizard was closed
I tried to install the new Gapps -> the same error.
After that i tried to flash the ROM again and install the right gapps -> the same error.
After that i tried to wipe cache, wipe dalvik cache and install gapps, wipe cache, wipe dalvik cache -> the same error.
What can i do?
I don't want to wipe everything on my phone.
mfg
wassilij
same issue here. i can confirm that factory reset/wipe does not help
I also have the same issue, i managed to access all applications and desktop by adding "Apps/Startprogram" as a shortcut in at my lockscreen. However when pressing homebutton i still have the issue where Setup Wizard crashes.
Rawa said:
I also have the same issue, i managed to access all applications and desktop by adding "Apps/Startprogram" as a shortcut in at my lockscreen. However when pressing homebutton i still have the issue where Setup Wizard crashes.
Click to expand...
Click to collapse
Same issue with new nightly 09.
It is not possible to change laucnher away from setup wizard until it is completed it seems.
---------- Post added at 11:34 PM ---------- Previous post was at 10:37 PM ----------
Managed to solve it!
First off make sure you have the newest version of ClockworkMod Recovery (6.0.4.4) :
The problem for me was using the wrong gapps i believe! It was ROM Manager who provided me with a bad version. I manually downloaded Gapps 4.4.0:
http://wiki.cyanogenmod.org/w/Gapps
There are also versions of 4.4.1 that should work aswell, I hav'nt tried though:
http://forum.xda-developers.com/showthread.php?t=2012857
Then i simply restarted my phone entering recovery mode (volume up, power, home) and reseted all phone data, reset dalvik etc. Then i first installed gapps from sdcard and then nightly from sdcard.
For those facing Setup Wizard has Stopped FC
I was facing this problem for a long time today. My device is a Galaxy Fit and I was playing with the latest cm11 kitkat update. However it does not work without a complete data wipe and after the data wipe and flashing the latest nightly it gave me the Setup Wizard Stopped FC.
All I did was -
1) Go to recovery mode
2) wipe data/factory reset (this option wipes data , cache and sd-ext)[using CWM 6.0.4.6]{use the Recovery version that allows you to install Kitkat if you faced this problem while flashing cm11 kitkat}
3)wipe cache
4) wipe system {from the mount unmount menu option}
5) wipe dalvik cache {from the advanced menu option}
6) flash the proper gapps file from the sd card
7) flash the proper rom from the sd card
[here I wanted to make sure if everything was working again so i rebooted and well the Setup Wizard DID NOT pop up]
8) rebooted into recovery and flashed the CWM 6.0.2.7 [which you will probably need for Mounts2Sd to work]
This is my first post ever.. Hope I helped. Ty:fingers-crossed:
I just wiped /system and it got fixed
himan20 said:
For those facing Setup Wizard has Stopped FC
I was facing this problem for a long time today. My device is a Galaxy Fit and I was playing with the latest cm11 kitkat update. However it does not work without a complete data wipe and after the data wipe and flashing the latest nightly it gave me the Setup Wizard Stopped FC.
All I did was -
1) Go to recovery mode
2) wipe data/factory reset (this option wipes data , cache and sd-ext)[using CWM 6.0.4.6]{use the Recovery version that allows you to install Kitkat if you faced this problem while flashing cm11 kitkat}
3)wipe cache
4) wipe system {from the mount unmount menu option}
5) wipe dalvik cache {from the advanced menu option}
6) flash the proper gapps file from the sd card
7) flash the proper rom from the sd card
[here I wanted to make sure if everything was working again so i rebooted and well the Setup Wizard DID NOT pop up]
8) rebooted into recovery and flashed the CWM 6.0.2.7 [which you will probably need for Mounts2Sd to work]
This is my first post ever.. Hope I helped. Ty:fingers-crossed:
Click to expand...
Click to collapse
Thank you so much. It worked on my gt-s5570 running CM11
Hi!
SGS2 / CM11 Nightly 20140701
If I turn Wifi ON once I can't turn it OFF and only reboot switch it off.
Could u help me pls?
Thx!
try to reboot into recovery and do wipe cache and dalvik cache
If not working try to reflash rom without wipe.
If still not working reflash full wipe and format system.