Hi, I bought a chinese tablet, but i had a problem... it was stuck on Android LOGO....
So i flashed FaastJB on the tablet and it worked...
Well it almost worket...
The tablet now loads into android, but now i dont have touch screen, wireless etc..
I have a photos of the tablet so maybe you guys can help me out.
I have this at home and can't use it for nothing...
PLEASE HELP!!!
Thanks in adavance....
heres the photo... http : //postimg.org/image/l54leghrl/[/url]
loadedlouie27 said:
Hi, I bought a chinese tablet, but i had a problem... it was stuck on Android LOGO....
So i flashed FaastJB on the tablet and it worked...
Well it almost worket...
The tablet now loads into android, but now i dont have touch screen, wireless etc..
I have a photos of the tablet so maybe you guys can help me out.
I have this at home and can't use it for nothing...
PLEASE HELP!!!
Thanks in adavance....
heres the photo... http : //postimg.org/image/l54leghrl/[/url]
Click to expand...
Click to collapse
If you have the model i have.. you"re in trouble ) I have a70h chinesse tablet same and is kiling me .
Maybe i can help with good advice. First try to identify your model device,in settings /about tablet ..and there you can see the model.
seccond move ,search on google for model recovery or... you can go simple in recovery mode by pressing power +vol up button in the same time. in this point you are in recovery mode .From here, you can select clear all user data/cache etc... and after you select: restore factory default ,depaindes what option you have there. After you select factory bla bla, the tablet will boot again and you will have a new instaled rom.
- Attention : you will lose all data you have now in your tablet. 2- this is the standar procedure for most android devices,not sure what model you have. 3- it work on my tablet with android jb.4.2.2 (not sure what you have again)
Hope it help you .
chinnese tablet help
jean_pulbere said:
If you have the model i have.. you"re in trouble ) I have a70h chinesse tablet same and is kiling me .
Maybe i can help with good advice. First try to identify your model device,in settings /about tablet ..and there you can see the model.
seccond move ,search on google for model recovery or... you can go simple in recovery mode by pressing power +vol up button in the same time. in this point you are in recovery mode .From here, you can select clear all user data/cache etc... and after you select: restore factory default ,depaindes what option you have there. After you select factory bla bla, the tablet will boot again and you will have a new instaled rom.
1- Attention : you will lose all data you have now in your tablet.
2- this is the standar procedure for most android devices,not sure what model you have.
3- it work on my tablet with android jb.4.2.2 (not sure what you have again)
Hope it help you .
Click to expand...
Click to collapse
----------------------------
hi FIRST THANKS for you reply...
i have tooked some more photos to the tablet, maybe someone can help me identify the tablet....
help me out pleasseeeee.... ..
AND YES IM REALLY FKED UP..
----------------------------
Related
Hello thanks for dropping by on my thread.
Please do help me to unbrick my tablet it's Kata T2 (Fish Tablet).
I've been reading through google for 5hours unfortunately didn't had any best results.
So maybe someone here or if there are any alternative steps to unbrick my tablet that you would recommend. Please do give advice or suggestion.
The problem is I have a "lying android with red triangle logo".
Tried to wipe data & wipe cache and everytime I do a reboot the fish logo appear (default logo) and proceed again to the lying android logo. Could you help me what to do?
If you're asking for a "backup" thing. the answer is NO.I don't have those.. And you might ask for the stock ROM too .. the answer is NO..
So please help me with this.. Thanks!..
same here
i also have a problem with kata t2. i rooted it with vroot then after it rebooted. the logo comes out but after that the screen goes to black. i know its turned on because i can see the light in the lcd but the problem is it wont reboot normally. i have tried to go to recovery mode data erased it to factory setting even deleted the cache but the problem still remains it wont boot normally and stays in black screen. if somebody would help us it will greatly appreciated. :good:
PS: i ask them if they can provide a stock firmware and the answer is they cant. any tips on how can i get it to boot back to normal? the stock firmware by the way is 4.1.1 jellybean... Happy new year
just return go to the nearest service center... i have also bricked mine and said to the technician some lies (virus) . trust me they dont know that you bricked it becauese of rooting it... maybe they just dont care..
Join the Kata T2 group in facebook.. they might help you there..
hey i found a new way to unbrick your kata t2. havnt tried it yet but try it!
1. turn off your kata t2
2. press power button and volume down until kata logo (fish) comes out
3. press again power button and volume down you will see the android logo with exclamation point
4. press power button and volume UP and you will go to recovery.... there you would find recover system from back up. click on it.
Just a suggestion ^_^
Hello,
I got a Huawei G700, I rooted it and installed ua frost custom rom. It was working fine during 2 months until the power button was not working (need to remove battery to switch it off ...), the volume reduced by itself, ... and the device can not start anymore !
When I want to start it, there is an message :
old : risk
new : risk
recovery_status : updated
So I can not access to any application to recover it (for example mobile uncle tools)
What could I do to restart it ?
Thanks a lot for your support
install recovery from pc?
nicoach37 said:
Hello,
I got a Huawei G700, I rooted it and installed ua frost custom rom. It was working fine during 2 months until the power button was not working (need to remove battery to switch it off ...), the volume reduced by itself, ... and the device can not start anymore !
When I want to start it, there is an message :
old : risk
new : risk
recovery_status : updated
So I can not access to any application to recover it (for example mobile uncle tools)
What could I do to restart it ?
Thanks a lot for your support
Click to expand...
Click to collapse
After looking for a solution, it seems that i have to reinstall a rom.
But, how to flash the recovery without access to the phone?
I can only access to recovery mode. ?...
Thanks again if someone could help me
nicoach37 said:
After looking for a solution, it seems that i have to reinstall a rom.
But, how to flash the recovery without access to the phone?
I can only access to recovery mode. ?...
Thanks again if someone could help me
Click to expand...
Click to collapse
If you have access to the recovery mode that mean you are lucky, BCZ when i bricked mine i had no access to either recovery or to the system backups. So what i did, was simply to restore the recovery file to my phone through SPflashtool,
as far as your problem is concerned you have flashed a custom ROM into your mobile, Now you have to go back to the factory shipped Android of your phone. to do so you'll have to download the factory OS and SPflashtool, IF your phone is G700-u10 than you can download the both files from this link, take his support and unbrick your phone
http://androidxda.com/fix-huawei-ascend-g700-bootloop#comment-1825
Same problem in G610-u20
When i try to flash my g610 that gives: setting stoped error,phone does not go into recovery mode and just a display shows :
Old:risk
new:risk
recovery_status:UPDATED
PLZ PLZ PLZ,i beg you help me to fix and solve this problem,very thanks to you
Hello, i have wrong fone Zte Blade Q ...I thought that it was sufficient to restore android .. but probably not .. PROBLEM:
Phone is switched on the ZTE logo,, followed by Android logo which lists Formatting / cache ... and here are stopped entire course, still loading but nothing happens and the phone will not turn off the key, I have to remove the battery ... Please experienced advice or someone who has had this problem and also how to solve the following .. THANK YOU! ..and I am from Slovakia, sorry for the translation.
kukoss said:
Hello, i have wrong fone Zte Blade Q ...I thought that it was sufficient to restore android .. but probably not .. PROBLEM:
Phone is switched on the ZTE logo,, followed by Android logo which lists Formatting / cache ... and here are stopped entire course, still loading but nothing happens and the phone will not turn off the key, I have to remove the battery ... Please experienced advice or someone who has had this problem and also how to solve the following .. THANK YOU! ..and I am from Slovakia, sorry for the translation.
Click to expand...
Click to collapse
Go here http://www.ztedevices.com/search.html?keyword=blade q and find the right carrier or region your phone is from and there are downloads and instructions on how to load the original software back to it.
reply
I tried it first as directed,,, there is the option to 1. install update / restore from SD card-which is not me at all because I did not even get to the desktop, 2. or via the android system recovery, also from sd card .... but can not seem to get into recovery through a combination of volume up + power, because there is always android logo appears, and below this written Formatting / cache .. still there fetching but nothing happens ... I guess it detonated the cache? I add video here as the phone message when certain manipulations
video
kukoss said:
I tried it first as directed,,, there is the option to 1. install update / restore from SD card-which is not me at all because I did not even get to the desktop, 2. or via the android system recovery, also from sd card .... but can not seem to get into recovery through a combination of volume up + power, because there is always android logo appears, and below this written Formatting / cache .. still there fetching but nothing happens ... I guess it detonated the cache? I add video here as the phone message when certain manipulations
Click to expand...
Click to collapse
i post video on youtube - ZTE Blade Q /wrong HW or SW ? , pls this write to search youtube ,,my nick on youtube Marek Gofald
Hi guys.
I'm new, and im today reg on this forum for help and to solve the problem.
I have mobile: phone pad g530 (mediacom)
And i turn on device, image on startup freeze....
Okey, i go to options press down volume gumb and shutdown gumb for boot, and select factory reset.
Restart phone and my device freeze on startup -.-
Again, the same does not help me factory reset
(My english is bad sorry) xd Im from bosnian hah.
Please help me guys ?
I have question ?
How to fix this ? Download and install new android ?
Does my cell phone supports Android 4.4.4 ?
If supported, what i need to take off to install it successfully on 4.4.4 version on my device and correct this errors.
Please help me and thanks.,
Hello everyone. This is a long story, so thanks in advance to read it and try to help me.
I've got a Trekastor surftab Ventos 8.0 this one --> http://www.trekstor.de/detalles-de-surftabs/product/272.html?file=tl_files/generatedPdf/272-de.pdf
model st80208-2 . I'm not sure if it is the 8 or 16 GB. And I don't know how to check it because the tablet is bricked.
How did I brick the tab?
This is a good question. I had lost the charger and I tried with another one with a higher voltage. This ruined the batery. And when I found the charger the tablet show a strange behaviour. It was trying to start but reboot before to finish. I was able to finish a full boot but the batery only works for a few minutes. After solve the batery problem, now I can start the tablet without problem about the voltage but, it seems like all this failed attemps to boot have made some damage somewhere.
What I have now?
The tablet start. It show's the trekstor logo. After that it show's the android logo, and that's all. It stuck's looping in the android logo.
What I have tried?
Everything.
1.- Custom recovery. http://forum.xda-developers.com/showthread.php?t=2039964 or this http://forum.xda-developers.com/showthread.php?t=1995984
This method not working in my tablet even when it was not bricked. (I tried it, when I was trying to get root access a month ago).
Power + Volumen (-) gets nothing at all. It's start normally. (and loop in my currently situation)
Power + Volumen (+) gets this screen http://cdn.howtogeek.com/wp-content/uploads/2012/12/android-recovery-mode.jpg and anything happens no matter what button I'm pressing even with the custom recovery in the sdcard.
2.- I tried to flash the tablet, but I didn't find information about how to do it and trust me, I have searched a lot.
I triend with this software: "Amlogic Image Burning Tool v.1.6.2.2" and this firmware http://forum.xda-developers.com/showthread.php?t=2039964 . But I get the error "find no upgrade config, please load it manually". I'm pretty sure I doing something wrong, but I have no experience with this software or flashing in general.
That's all for now I'm tired of reading this forum and this other one in german. (thanks to google translator) http://www.android-hilfe.de/surftab-ventos-8-0-forum/ and I did not find anything useful for me
You people are my only hope. (Any Star wars fan in the room?:laugh:
So any help would be wonderful, thanks in advance and sorry for my mistakes, english is no my mother language.