Hi there!
The new thread is because I'm haveing some problems with my Samsung Galaxy 550 (Or Samsung Galaxy 5)
I'm trying to install CyanogedMod with a Recovery ClockwordMod but, always I try, no matter what Cyanoged Mod I try, I'cant because the install is aborted and the CWM tells me: Can't Open file RAR (BAD) or something like that.
If anyone can help me, please.
Greetings from Venezuela.
Re-download the rom again n try
Sent from my GT-I9103 using Tapatalk
venkatraman said:
Re-download the rom again n try
Sent from my GT-I9103 using Tapatalk
Click to expand...
Click to collapse
Hi, good morning, I tryed it and nothing, I just tryed with some differents rooms, no-one works, all of them say "Abort (bad)"
AdriaMRios said:
I'm trying to install CyanogedMod with a Recovery ClockwordMod but, always I try, no matter what Cyanoged Mod I try, I'cant because the install is aborted and the CWM tells me: Can't Open file RAR (BAD) or something like that.
Click to expand...
Click to collapse
CWM flashes only .zip files, not .rar
Sent from my GT-I5500 [CM11]
Vagelis1608 said:
CWM flashes only .zip files, not .rar
Sent from my GT-I5500 [CM11]
Click to expand...
Click to collapse
THANKS A LOT! I'll try.
AdriaMRios said:
THANKS A LOT! I'll try.
Click to expand...
Click to collapse
And...also CWM doesn't flash .tar.
Related
Hi..
i am new here and i have one question..
How to install any rom..when i go to the recovery i cant find install zip from sd card....any idea?
Tnx
Sent from my GT-I9100 using XDA App
probably u have the standard kernel and no custom kernel with clockwork mod on your phone. "install from zip" is only supported in cwm
dzontra11 said:
Hi..
i am new here and i have one question..
How to install any rom..when i go to the recovery i cant find install zip from sd card....any idea?
Tnx
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
To install a ROM you MUST read the instructions in the thread where you got it. It's not just 1 procedure for all different ROMs.
Seriously, if you've not read the installation instructions in the ROM thread, DO NOT try and install it!!!
Try to understand ,,my English its not good enough..
Also ,,i never have a Galaxy before (only HTc phones) and flasing and root its totaly diferent then Htc....so because of that i need help.
TNx
Hi everyone, i have a problema when i tried to port a rom. I flash the rom and said:
E:Error in /sdcard/cm-10.......
(Status 6)
Help please
-----------------------------------------------------------------------------------------------------------------------
Okay, i solved the problem, now i have another problem:
symlinks: some symlinks failed
E:Error in /sdcard/cm-10....
(Status 7)
marcomarinho9 said:
Hi everyone, i have a problema when i tried to port a rom. I flash the rom and said:
E:Error in /sdcard/cm-10.......
(Status 6)
Help please
Click to expand...
Click to collapse
Status 6 is an error that occurs when its reading a file in updater script that hasn't been encoded in Unix.. When working with updater script use notepad ++
Sent from my LG-P500 using Tapatalk 2
jerry7389 said:
Status 6 is an error that occurs when its reading a file in updater script that hasn't been encoded in Unix.. When working with updater script use notepad ++
Sent from my LG-P500 using Tapatalk 2
Click to expand...
Click to collapse
And the error Status 7??
marcomarinho9 said:
And the error Status 7??
Click to expand...
Click to collapse
What recovery are you using?
Sent from my LG-P500 using Tapatalk 2
jerry7389 said:
What recovery are you using?
Sent from my LG-P500 using Tapatalk 2
Click to expand...
Click to collapse
I tried CWM, AmonRa
marcomarinho9 said:
I tried CWM, AmonRa
Click to expand...
Click to collapse
Im not sure..try "fix permissions" in recovery
Make sure and do a full wipe also
Sent from my LG-P500 using Tapatalk 2
jerry7389 said:
Im not sure..try "fix permissions" in recovery
Make sure and do a full wipe also
Sent from my LG-P500 using Tapatalk 2
Click to expand...
Click to collapse
Ok, i will try later because i have that put the oficial Gingerbread with KDZ because I enter in bootloop. In Tuesday I have do the same. I don´t understand this. I think that my phone is crazy :laugh:
marcomarinho9 said:
Ok, i will try later because i have that put the oficial Gingerbread with KDZ because I enter in bootloop. In Tuesday I have do the same. I don´t understand this. I think that my phone is crazy :laugh:
Click to expand...
Click to collapse
Good luck..let me know if you get it working
Sent from my LG-P500 using Tapatalk 2
jerry7389 said:
Good luck..let me know if you get it working
Sent from my LG-P500 using Tapatalk 2
Click to expand...
Click to collapse
Doesn´t work
marcomarinho9 said:
Doesn´t work
Click to expand...
Click to collapse
status 7 error is when build.prop is damaged it happens when u wipe all and just switch off the rom just flash a gb with kdz and flash a new rom
FD1999 said:
I don't understand you, too...
The build.prop is located in /system/, which will be deleted when you format /system.
@marcomarinho
Can I have the updater-script?
Maybe you forgot to modify the assets
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
I don´t midify anithing in updater-script
FD1999 said:
Yes, then send it us! There are some commands which will check the model of the phone
Click to expand...
Click to collapse
The model of the phone is right because i don´t change anithing in updater-script. The updater-script is a original CM10 build 6 by Rashed97
FD1999 said:
Yes, then send it us! There are some commands which will check the model of the phone
Click to expand...
Click to collapse
I tried to port a HTC Buzz (Wildfire) rom and use this method: http://forum.xda-developers.com/showthread.php?t=1908008
FD1999 said:
HTC Buzz JB ROM?
No, it seems like you are using a CM10 script on GB or ICS. Also you need the updater-binary
Click to expand...
Click to collapse
YES, is JB
I need to replace the updater-binary into JB rom made by HTC Buzz ???
Hello guys I was wondering if you could change the ClockworkMod recovery, and if so, how? Thanks in advance for the answers
You can do it via "Rom Manager".
You can find it at Google Play...
pigeonaras said:
You can do it via "Rom Manager".
You can find it at Google Play...
Click to expand...
Click to collapse
Excuse me perhaps I did not express it the right way I mean literally modify the ClockworkMod (eg modify the background image or color) and I do not think it can be done from Rom Manager
I would give TWRP a trying if you want themes.
Sent from my Nexus 4 using Tapatalk 2
dEris said:
I would give TWRP a trying if you want themes.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
I would like to create a Recovery based on ClockworkMod's why I would be interested to open it, I tried to do with all applications that work with the file. Img but nothing, can not open it, give me all error
Try yaffs tool maybe it will help..
Sent from moon to earth........
Moonguy75 said:
Try yaffs tool maybe it will help..
Sent from moon to earth........
Click to expand...
Click to collapse
Nothing to do I've tried all sorts of tools Yaffs and Unyaffs but all or give an error or say that the img file is empty
---blacksoul--- said:
Nothing to do I've tried all sorts of tools Yaffs and Unyaffs but all or give an error or say that the img file is empty
Click to expand...
Click to collapse
I hope this guide helps..
http://forum.xda-developers.com/showthread.php?t=1639673
hit thanks if helped
Suyash1996 said:
I hope this guide helps..
http://forum.xda-developers.com/showthread.php?t=1639673
hit thanks if helped
Click to expand...
Click to collapse
Ok but with the file mmcblk0p22 then I have to do?
UP!!
Hi all,
I realize this issue must have been asked before but I couldn't find the fix through the forum.
I'm trying to flash my Galaxys S3 (I9300 International Version) but nothing seems to work.
I go into recovery and try to unzip the latest CWM (here) but all I get is a 'signature verification failed'.
I try to install CWM recovery through the app but it says 'an error occured while flashing your recovery'.
When I try to flash this ROM (here), CM11, from recovery, after a full factory reset I get 'failed to verify whole-file signature' & 'signature verification failed'.
So that leaves me stuck at the beginning ...
Can anyone help?
Thanks in advance!
Senorcoco said:
Hi all,
I realize this issue must have been asked before but I couldn't find the fix through the forum.
I'm trying to flash my Galaxys S3 (I9300 International Version) but nothing seems to work.
I go into recovery and try to unzip the latest CWM (here) but all I get is a 'signature verification failed'.
When I try to flash this ROM (here), CM11, from recovery, after a full factory reset I get 'failed to verify whole-file signature' & 'signature verification failed'.
So that leaves me stuck at the beginning ...
Can anyone help?
Thanks in advance!
Click to expand...
Click to collapse
Lemme guess. U are on stock recovery.
Sent from my GT-I9300.
Give a thank if i helped you.
JellyYogurt said:
Lemme guess. U are on stock recovery.
Sent from my GT-I9300.
Give a thank if i helped you.
Click to expand...
Click to collapse
I am, but I can't get into CMW recovery either, not through the app.
I just get an error when it reaches a 100%.
Should I buy the touch version from the store?
Senorcoco said:
I am, but I can't get into CMW recovery either, not through the app.
I just get an error when it reaches a 100%.
Should I buy the touch version from the store?
Click to expand...
Click to collapse
U cannot flash tat zip file from the link u posted first with stock recovery. Tat must be flashed from cwm recovery. Use ROM manager from play store. Then flash the recovery zip file then the rom.
Sent from my SM-N9005 using xda app-developers app
Give a thank if I helped you.
JellyYogurt said:
U cannot flash tat zip file from the link u posted first with stock recovery. Tat must be flashed from cwm recovery. Use ROM manager from play store. Then flash the recovery zip file then the rom.
Sent from my SM-N9005 using xda app-developers app
Give a thank if I helped you.
Click to expand...
Click to collapse
I have installed ROM manager, but the app doesn't let me flash or do anything.
It gives me an error when I select Flash ClockworkMod Recovery ... an error occured while flashing your recovery
But no further info ...
Senorcoco said:
I have installed ROM manager, but the app doesn't let me flash or do anything.
It gives me an error when I select Flash ClockworkMod Recovery ... an error occured while flashing your recovery
But no further info ...
Click to expand...
Click to collapse
Are u rooted?
Sent from my SM-N9005 using xda app-developers app
Give a thank if I helped you.
JellyYogurt said:
Are u rooted?
Sent from my SM-N9005 using xda app-developers app
Give a thank if I helped you.
Click to expand...
Click to collapse
:cyclops:
I just discovered that I skipped that crucial step...
What is the fastest/easiest way to root your Galaxy S3?
Thanks for your help
Senorcoco said:
:cyclops:
I just discovered that I skipped that crucial step...
What is the fastest/easiest way to root your Galaxy S3?
Thanks for your help
Click to expand...
Click to collapse
Found it and managed to flash!
I just needed to ROOT
Thanks!
Senorcoco said:
:cyclops:
I just discovered that I skipped that crucial step...
What is the fastest/easiest way to root your Galaxy S3?
Thanks for your help
Click to expand...
Click to collapse
Its all in the faqs and guides .
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
Senorcoco said:
Found it and managed to flash!
I just needed to ROOT
Thanks!
Click to expand...
Click to collapse
You are welcome
Sent from my SM-N9005 using xda app-developers app
Give a thank if I helped you.
You need to flash CWM through Odin in order to flash other stuff (.zip file to root, etc.). You can dig up guides on the internet.
Jacky0501 said:
You need to flash CWM through Odin in order to flash other stuff (.zip file to root, etc.). You can dig up guides on the internet.
Click to expand...
Click to collapse
Correction. U nid ROOT to use cwm
Sent from my SM-N9005 using xda app-developers app
Give a thank if I helped you.
[HELP] CM 10.1 Unofficial
Hello to all out there,
I am having a problem with my GT S5282. My cousin do some custom rom on my phone
The file name was "cm10.1-unofficial(gt-s5282)-junkybean(pre-alpha1.1)". When I reboot my phone, it got stuck on loading screen, CyanogenMod.
I want to get back my old phone, but I don't know how. I search on google and I came up to Stock Rom. Any helpfull tips
out there. I just want to get back my old phone. :crying:
Can't find any backup. Really need your help
*sorry for my bad english*
Just flash stock deodexed rom
Sent from my GT-S5282 using XDA Free mobile app
Thanks. Gonna look for it
Problem. Downloaded the STOCK DEODEXED [PreRooted] from here but when going to flash it. Installation was aborted.
Can you send me a working one ?
minigor_ said:
Problem. Downloaded the STOCK DEODEXED [PreRooted] from here but when going to flash it. Installation was aborted.
Can you send me a working one ?
Click to expand...
Click to collapse
Flash using cwm 6.0.37.
Or may be ur download is corrupted
Sent from my GT-S5282 using XDA Free mobile app
My download isn't corrupted I guess. I have CWM 6.0.3.7
But installation always aborted :crying: Please I need to get my old phone back.
minigor_ said:
My download isn't corrupted I guess. I have CWM 6.0.3.7
But installation always aborted :crying: Please I need to get my old phone back.
Click to expand...
Click to collapse
Flash official stock rom via odin.
Sent from my GT-S5282 using XDA Free mobile app
minigor_ said:
My download isn't corrupted I guess. I have CWM 6.0.3.7
But installation always aborted :crying: Please I need to get my old phone back.
Click to expand...
Click to collapse
just flash any rom.