I'm about to give up, finally.
Okay so far I've: re-flashed with AT&T MK2 firmware...
I cannot: find a .pit file the phone will accept.
I cannot yet: establish a jtag connection and I know I'm wiring in right...
The MK2 Firmware flashes with Odin, no problem. This states on the download screen it shows:
ODIN MODE
PRODUCT NAME: SGH-I527
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
CSB-CONFIG-LSB: 0x30
BOOTLOADER AP SWREV: 3
WRITE PROTECTION: Enable
With the MK2 flash, it shows no errors unless I add the .PIT file I've found here for the I527.
When that's added with "Repartition" checked, it states SECURE CHECK FAIL: PIT
Either way, it accepts the firmware then reboots, as expected with "Recovery Booting" but it hangs there, then either sticks there or begins to boot loop.
Any ideas? Download is always accessible. I've never had a Samsung that was accessible in Download mode but unable to be successfully flashed.
cmw80 said:
I'm about to give up, finally.
Okay so far I've: re-flashed with AT&T MK2 firmware...
I cannot: find a .pit file the phone will accept.
I cannot yet: establish a jtag connection and I know I'm wiring in right...
The MK2 Firmware flashes with Odin, no problem. This states on the download screen it shows:
ODIN MODE
PRODUCT NAME: SGH-I527
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
CSB-CONFIG-LSB: 0x30
BOOTLOADER AP SWREV: 3
WRITE PROTECTION: Enable
With the MK2 flash, it shows no errors unless I add the .PIT file I've found here for the I527.
When that's added with "Repartition" checked, it states SECURE CHECK FAIL: PIT
Either way, it accepts the firmware then reboots, as expected with "Recovery Booting" but it hangs there, then either sticks there or begins to boot loop.
Any ideas? Download is always accessible. I've never had a Samsung that was accessible in Download mode but unable to be successfully flashed.
Click to expand...
Click to collapse
Well not really sure but on that pit file it sounds like it is not signed..a knox thing..but while you have the rom installed do a factory reset and clear the dalvik cache and see if that will help.
Sent from my SGH-I527M using xda app-developers app
starmaster10 said:
Well not really sure but on that pit file it sounds like it is not signed..a knox thing..but while you have the rom installed do a factory reset and clear the dalvik cache and see if that will help.
Sent from my SGH-I527M using xda app-developers app
Click to expand...
Click to collapse
That's an excellent idea.... If only I could get into recovery. It won't go into it....
I could go ahead and clean it out now, I have my own .PIT extracted from the device BUT I'm missing a lot of the partitions I'd need to accomplish this. ie everything not included in the Odin Flashable .tar.md5 file for MK2 here....
I do appreciate the suggestion though.
cmw80 said:
That's an excellent idea.... If only I could get into recovery. It won't go into it....
I could go ahead and clean it out now, I have my own .PIT extracted from the device BUT I'm missing a lot of the partitions I'd need to accomplish this. ie everything not included in the Odin Flashable .tar.md5 file for MK2 here....
I do appreciate the suggestion though.
Click to expand...
Click to collapse
No problem..i did not realize you could not get into the recovery..
Just throwing this out there but imagine you probably already tried. Have you tried updating through kies while in download mode.
Sent from my SAMSUNG-SGH-I527
Any update on your mega?
Im having the same problem but bootloader swrev 4 as of today from Bestbuy samsung center pushing kitkat on it but still stuck in bootloop
I'm in a similar situation. Phone won't boot and will not go into recovery.
Pic of D/L mode:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pic of Recovery:
Pic of Kernel Flash - but phone still won't boot - just goes to the same thing as the above pic of the recovery
Pic of PIT Fail:
Any help is appreciated. KIES won't connect to the device either.
I can flash any firmware I want in Odin but it just won't boot.
I tried using a debrick.img and writting it to the SD card with W32DiskImager but with the SD card in when I turn on the phone it just goes to the same screen as the pic above in recovery mode.
ixoye777 said:
I'm in a similar situation. Phone won't boot and will not go into recovery.
Pic of D/L mode:
Pic of Recovery:
Pic of Kernel Flash - but phone still won't boot - just goes to the same thing as the above pic of the recovery
Pic of PIT Fail:
Any help is appreciated. KIES won't connect to the device either.
I can flash any firmware I want in Odin but it just won't boot.
I tried using a debrick.img and writting it to the SD card with W32DiskImager but with the SD card in when I turn on the phone it just goes to the same screen as the pic above in recovery mode.
Click to expand...
Click to collapse
Hi..since you have the i527m mega (Canadian version) by what your pic shows above by flashing this rom ROOT_JDQ39.I527MVLUBNA3.tar by @krazykipa it should get you up and running again and the rom is rooted already, this is the rom i use when this happens to me, just unpack it first to get the .tar file and then flash with odin..and i believe this is a rogers rom which will still work..just remove any rogers stuff if you do not have the same carrier...at least you should be up and running again. :good:
Thanks starmaster10, it's d/l now, I appreciate the help. I'll try flashing it and report how it went
ixoye777 said:
Thanks starmaster10, it's d/l now, I appreciate the help. I'll try flashing it and report how it went
Click to expand...
Click to collapse
Sounds good.
starmaster10 said:
Hi..since you have the i527m mega (Canadian version) by what your pic shows above by flashing this rom ROOT_JDQ39.I527MVLUBNA3.tar by @krazykipa it should get you up and running again and the rom is rooted already, this is the rom i use when this happens to me, just unpack it first to get the .tar file and then flash with odin..and i believe this is a rogers rom which will still work..just remove any rogers stuff if you do not have the same carrier...at least you should be up and running again. :good:
Click to expand...
Click to collapse
As always, very solid advice and information from you.
????
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
captemo said:
As always, very solid advice and information from you.
????
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks..kinda ended up in the i527 section for the AT&T on this one.
That Rooted Rogers Rom did the trick, it is up and running. Now I can go through and unlock it and get it all setup. I Really appreciate the help - thanks!
ixoye777 said:
That Rooted Rogers Rom did the trick, it is up and running. Now I can go through and unlock it and get it all setup. I Really appreciate the help - thanks!
Click to expand...
Click to collapse
Sweet..that sounds great and you are welcome.
Related
I tried to flash resurrection remix rom on my sgs2. But it did not boot after installation.
Now I can't get in my recovery to do a restore. It stuck on the screen which says Samsung galaxy sII
Please help I don't know what to do
Linda90 said:
I tried to flash resurrection remix rom on my sgs2. But it did not boot after installation.
Now I can't get in my recovery to do a restore. It stuck on the screen which says Samsung galaxy sII
Please help I don't know what to do
Click to expand...
Click to collapse
Just a bootloop, give this a go: http://forum.xda-developers.com/showthread.php?t=1108499
You will lose all data although, nothing on external sd card will be lost.
Also, how did you flash the ROM? If you followed the guide step-by-step, you shouldn't have ended up in a bootloop.
I wiped all partitions and then flashed the zip file.
Is it with a bootloop that you even can't get in to recovery? I'm stuck on samsung logo, not on RR logo
Linda90 said:
I wiped all partitions and then flashed the zip file.
Click to expand...
Click to collapse
Ok, well give the thread I linked above a go. You can download stock ROM's from sammobile.com, and flash through Odin. Do you know how to use Odin?
---------- Post added at 10:31 PM ---------- Previous post was at 10:23 PM ----------
Linda90 said:
I wiped all partitions and then flashed the zip file.
Is it with a bootloop that you even can't get in to recovery? I'm stuck on samsung logo, not on RR logo
Click to expand...
Click to collapse
Ah I'm stupid! You need to get into recovery for that thread! You're definitely holding the correct buttons when the phone is fully off (home + power + volume up)?
I think I will give it a go. But the threat says that you should do it from your recovery, or if you are not comfortable with the recovery way you should do it via odin. I can't get in recovery, so maybe I have an other problem..
I'm honestly a little scared of odin.
once I had to do something with odin, but that failed. so I could not get out download mode..
Linda90 said:
I think I will give it a go. But the threat says that you should do it from your recovery, or if you are not comfortable with the recovery way you should do it via odin. I can't get in recovery, so maybe I have an other problem..
I'm honestly a little scared of odin.
once I had to do something with odin, but that failed. so I could not get out download mode..
Click to expand...
Click to collapse
This is taken straight from my rooting guide. It will help you correctly set up Odin:
First off, you need Odin, which is a flashing tool specifically designed for the SGS2: Just type in "Odin 1.85" without quotations into Google and the first result should display "Odin - xdadevelopers - XDA Developers." Click on the link and Odin will download.
Now before going ahead with Odin, download Kies: http://www.samsung.com/us/kies/ ,which is like iTunes for Samsung Devices, the drivers are needed for Odin, but when the drivers have been installed, close Kies, right click on your toolbar at the bottom of your desktop, I'll assume your running Windows 7, and go into Task Manager. Now find anything with Kies running in the Task Manager, right click on them and kill them.
Once you have done this, go to "sammobile.com", sign up and download a stock ROM for the GT-I9100. I'll assume you have the international SGS2, just remove your battery and make sure it isn't the GT-I9100G. Then flash via Odin by connecting your phone, making sure Odin is configured like above, and then putting your phone in download mode, connecting it to your PC and put the file you downloaded in the PDA section and flash.
themadba said:
Ah I'm stupid! You need to get into recovery for that thread! You're definitely holding the correct buttons when the phone is fully off (home + power + volume up)?
Click to expand...
Click to collapse
Yes definitely!
Linda90 said:
Yes definitely!
Click to expand...
Click to collapse
Here is a link to the stock firmware for the GT-I9100 in the UK on my operator: http://www.sammobile.com/firmware/?page=3&model=GT-I9100&pcode=O2U&os=1&type=1#firmware
Scroll up just above the table of firmwares and choose your country and operator if possible.
themadba said:
Here is a link to the stock firmware for the GT-I9100 in the UK on my operator: http://www.sammobile.com/firmware/?page=3&model=GT-I9100&pcode=O2U&os=1&type=1#firmware
Scroll up just above the table of firmwares and choose your country and operator if possible.
Click to expand...
Click to collapse
Oke, so I need to flash an other rom through Odin and everything sould work?
Is it possible to flash a nandroid backup of my previous rom through Odin wich are on my sd?
I'm afraid the square in odin doesn't become green.. :angel:
Linda90 said:
Oke, so I need to flash an other rom through Odin and everything sould work?
Is it possible to flash a nandroid backup of my previous rom through Odin wich are on my sd?
I'm afraid the square in odin doesn't become green.. :angel:
Click to expand...
Click to collapse
Yes, if you can't get into Recovery Mode, a new flash is your only saviour. When you have flashed the ROM and hopefully everything went well, you can root your ROM by using Chainfire's CF-Root. Then you could restore a backup.
I have also a zip-file of my previous rom on my sd-card. That was codename lungo. Can I flash that zip so i don't neet to re-root lik you said?
Linda90 said:
I have also a zip-file of my previous rom on my sd-card. That was codename lungo. Can I flash that zip so i don't neet to re-root lik you said?
Click to expand...
Click to collapse
Do you know what it is/does? Also, the guide I took that segment on setting up Odin was actually written for rooting your ROM with CF-Root.
Oh, its a ROM. My bad! Well, I'm not too sure. I think if you have a backup of it, that would be safer. Rooting is real easy anyway.
Is Codename Lungo not a HTC Sensation ROM?
Oke thank you.
I will download the stock firmware from sammobile, and try to flash it with Odin. I just want it to work again (root or no root) and not have to buy a new phone
Linda90 said:
Oke thank you.
I will download the stock firmware from sammobile, and try to flash it with Odin. I just want it to work again (root or no root) and not have to buy a new phone
Click to expand...
Click to collapse
Don't thank me till it's working! Once new ROM flashed and booted, let me know.
By the way, don't use the .PIT file if one is included in the download, if you get PDA, PHONE and CSC, put in appropriate sections of Odin and flash, if just one file, put in PDA section and flash.
themadba said:
This is taken straight from my rooting guide. It will help you correctly set up Odin:
First off, you need Odin, which is a flashing tool specifically designed for the SGS2: Just type in "Odin 1.85" without quotations into Google and the first result should display "Odin - xdadevelopers - XDA Developers." Click on the link and Odin will download.
Now before going ahead with Odin, download Kies: http://www.samsung.com/us/kies/ ,which is like iTunes for Samsung Devices, the drivers are needed for Odin, but when the drivers have been installed, close Kies, right click on your toolbar at the bottom of your desktop, I'll assume your running Windows 7, and go into Task Manager. Now find anything with Kies running in the Task Manager, right click on them and kill them.
Once you have done this, go to "sammobile.com", sign up and download a stock ROM for the GT-I9100. I'll assume you have the international SGS2, just remove your battery and make sure it isn't the GT-I9100. Then flash via Odin by connecting your phone, making sure Odin is configured like above, and then putting your phone in download mode, connecting it to your PC and put the file you downloaded in the PDA section and flash.
Click to expand...
Click to collapse
Mine is the GT-i9100. Is this bad?
Linda90 said:
Mine is the GT-i9100. Is this bad?
Click to expand...
Click to collapse
That was a HUGE mistype. It is good. It should say that it shouldn't be the GT-I9100G! Good spot!
It worked!
I have a complete stock unrooted sgs2 now
Thanks alot
I'm trying to root my phone again with your rooting guide themadba. But I canot find a maching kernel version?
My kernel nr:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dial *#1234# and post results please.
Sent from my GT-I9100 using xda app-developers app
Hello!
I soft bricked my Samsung Galaxy s3 GT-I9300
I don't know how...
I tried flashing cutom roms, stock roms and kernels...nothing works
ODIN says: NAND write start!! Then it fails everytime.
So i'm looking forward to send it back to the service centre as it is supposedly still on warranty. To benefit from the warranty, the custom binary download should be "No".
My phone can still go into download mode, recovery mode is inaccessible.
In download mode it sayS:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: Yes (5 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
Is there any way I can reset the custom binary download to "No" ?
PS: According to some videos on YouTube, USB jigs only get the phone in download mode, it does NOT reset the custom binary download counter.
Please help me, thank you.
Gowtamee said:
Hello!
I soft bricked my Samsung Galaxy s3 GT-I9300
I don't know how...
I tried flashing cutom roms, stock roms and kernels...nothing works
ODIN says: NAND write start!! Then it fails everytime.
So i'm looking forward to send it back to the service centre as it is supposedly still on warranty. To benefit from the warranty, the custom binary download should be "No".
My phone can still go into download mode, recovery mode is inaccessible.
In download mode it sayS:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: Yes (5 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
Is there any way I can reset the custom binary download to "No" ?
PS: According to some videos on YouTube, USB jigs only get the phone in download mode, it does NOT reset the custom binary download counter.
Please help me, thank you.
Click to expand...
Click to collapse
your in the wrong forum this is for i9305
Blackwolf10 said:
your in the wrong forum this is for i9305
Click to expand...
Click to collapse
Nope, you are mistaken buddy.
wangdaning said:
Nope, you are mistaken buddy.
Click to expand...
Click to collapse
he was when i posted that
the Mod have moved the post to here
---------- Post added at 04:19 AM ---------- Previous post was at 04:14 AM ----------
Gowtamee said:
Hello!
I soft bricked my Samsung Galaxy s3 GT-I9300
I don't know how...
I tried flashing cutom roms, stock roms and kernels...nothing works
ODIN says: NAND write start!! Then it fails everytime.
So i'm looking forward to send it back to the service centre as it is supposedly still on warranty. To benefit from the warranty, the custom binary download should be "No".
My phone can still go into download mode, recovery mode is inaccessible.
In download mode it sayS:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: Yes (5 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
Is there any way I can reset the custom binary download to "No" ?
PS: According to some videos on YouTube, USB jigs only get the phone in download mode, it does NOT reset the custom binary download counter.
Please help me, thank you.
Click to expand...
Click to collapse
now as for your problem i think you damaged the motherboard in some way that's why you can't flash anything
hi
try this link
http://forum.xda-developers.com/showthread.php?p=41593409#post41593409
did you check all the usb ports on yoir cpu? all of 'em giving same result??
sent from my GT-I9300 running Mac OS
sriram231092 said:
did you check all the usb ports on yoir cpu? all of 'em giving same result??
sent from my GT-I9300 running Mac OS
Click to expand...
Click to collapse
By cpu you mean computer? Not central processing unit, which cpu typically stands for?
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
By cpu you mean computer? Not central processing unit, which cpu typically stands for?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
yeah yeah cpu of his PC.
sriram231092 said:
yeah yeah cpu of his PC.
Click to expand...
Click to collapse
Theres no USB ports on the CPU of his PC...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My intel i7 has all kinds of usb sockets on it.
I don't even need a motherboard.
CPU is the processor. Computer, pc, these are what have ports. Your phone has a cpu also, is that what you mean?
It is a small point but at the same time big and important as I know many here are translating to get information.
To the OP:
1) Download the CF root for your device. Place it in the PDA section of odin and flash. Read here http://forum.xda-developers.com/showthread.php?t=1695238
2) Enter recovery (volume up + home + power) and wipe things
3) Download and install a CWM compatable .zip rom, I can recommend wanam's roms http://wanamlite.com/category/devices/rom-galaxy-s3/ But I would not start with a leak!
4) When and if you get running update your recovery!
Have been in your situation. I have even lost recovery, old tv style look when I go there. It may be recoverable.
Most custom roms flash through recovery, so if you are trying to flash with odin it will fail.
Try this and let us know how it goes. Also, make it clear how it fails, ie what file went to what program to do what.
Again, most custom roms and kernels cannot be flashed with Odin, that might be the reason you are soft bricked.
Laptop/Computer ports.
Brother, First of all completely uninstall samsung kies and samsung folders from your computer, then reinstall kies. After reinstallation is completed just close kies and start ODIN and flash your cell phone with help of download mode
I faced the same problem and this helped me out, and yes.. your device is not bricked
All the best :good:
As always, a HUGE thanks goes to my partner in crime, @garwynn, for all the hard work he puts in on our site and all that he does for the community. He is the man!
Second, thanks to @vinman12 for posting the TAR here.
This Odin One-Click.exe contains the Stock ND2 Bootloader, Kernel, Modem and ROM for the Sprint Samsung Galaxy S5(SM-G900P). Yes, that means this comes with the full Knox Bootloader.
There has been no change to the ROM from the initial build released by Samsung.
This will NOT trigger the Yellow Triangle NOR will it increment the Odin flash count.
This one-click resets your whole phone to the stock ND2 experience, similar to a factory restore and it may wipe all data. It also contains the full bootloader and Knox.
Instructions:
1: Backup anything important and Disable any PINs.
During this process your phone's software will be returned to the Stock setup. All system data will be lost. To be safe, it is best to archive your backup off your phone, ie on your PC or Dropbox.
2: Install Samsung USB/Android drivers (if necessary).
Samsung Drivers Download Link
3: Download the ND2 Stock ROM One-Click.
SM-G900P_ND2_Full Restore_UNROOTED (Compressed Archive).exe (Resets user data)
4: Unzip One-Click ROM using 7zip (this package is a self-extracting exe you should just be able to double-click on it after download and it will do the rest).
5: Start the Odin One-Click.
Navigate to the location where the SM-G900P_ND2_Full_Restore_UNROOTED.exe was saved upon extract from the 7Zip archive.
Double-click on SM-G900P_ND2_Full_Restore_UNROOTED.exe. *On Vista or newer, you may need to right-click on the file and select Run as Administrator.
6: Place phone in Download Mode.
- Power phone completely off.
- Press and hold Volume Down, Home and Power buttons, all at the same time.
- Release the buttons only when the ‘Warning!!’ message appears.
- Press [Volume Up] to enter Download mode.
7: Connect USB cable to PC and phone.
Odin should show a yellow COM port in the second column. If you do not see a yellow COM port, you may need to run the Odin One-Click as Administrator and/or unplug/plugin the USB cable after starting Odin One-Click.
8: Start Odin flash process.
Press [Start].
9: Complete - PASS!
Status should change to green PASS! At this point your phone should automatically reboot.
The boot process will take slightly longer than usual during which time you'll see the Sprint 4G/Spark logo screen.
Congratulations! You've flashed the Factory Restore ND2 build!
View attachment 2799603
XDA:DevDB Information
[ROM][ODIN]SM-G900P ND2 (ND2 Modem/Kernel/Bootloader/ROM - Full Restore - Unrooted), ROM for the Sprint Samsung Galaxy S 5
Contributors
rwilco12
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2015-02-10
Last Updated 2015-02-10
Download: http://www.rwilco12.com/forum/showthread.php?tid=787
Great work as usual. Your hard work is appreciated!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hopefully i will never need to use this but thanks for your work!!
Nice to have this ty
Sent from my SM-G900P using Tapatalk
Will this restore knox to 0x0?
Sent from my SM-G900P using XDA Premium 4 mobile app
g.armour said:
Will this restore knox to 0x0?
Sent from my SM-G900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unfortunately it doesn't. It does reset system status to official but no change to Knox.
Sent from my SM-G900P using Tapatalk
So if this doesn't reset Knox is the phone warranty still void? Or is it good enough to use for warranty work?
Sent from my SM-G900P using XDA Free mobile app
Dgsaxhitman84 said:
So if this doesn't reset Knox is the phone warranty still void? Or is it good enough to use for warranty work?
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
Not yet, so far stock will not reset counter, warranty still voided.
---------- Post added at 01:07 PM ---------- Previous post was at 01:04 PM ----------
I think stock rom far better versus modded roms. Feels more responsive especially for calling app which is mandatory for me and I'm sure for you too.
---------- Post added at 01:07 PM ---------- Previous post was at 01:07 PM ----------
rwilco12 said:
Download: http://www.rwilco12.com/forum/showthread.php?tid=787
Click to expand...
Click to collapse
What's this link?
Thanks for this rwilco12, great to have you here with us
Enviado desde mi SM-G900P mediante Tapatalk
HD-man said:
What's this link?
Click to expand...
Click to collapse
That's the link to my site where got can download the files from.
Sent from my SM-G900P using Tapatalk
Was pretty cool didn't even change the ROM and for some reason I didn't get the Sprint bootloader back.
Knox counter
will flashing this stock rom trip my knox count? my phone was rooted with towel root but having some issues with my phone. now i want to return it back to full stock
Thank you so much man! I wiped my phone clean of an O/S like a d*** and this helped out a lot. I know it wasn't much but I had to give you a little $ for that. Again, thank you!
Back to stock
Hi,
I currently have rooted S5, running MOAR with philz recovery. My phone has been running a bit wonky with quite a few problems and I think starting fresh as if I just opened the box with my shiny brand new S5 (instead of normal factory reset when flashing rom) would be the way to go. I have been searching and reading and to be honest, my head is spinning. I think this procedure is what I need to accomplish my goal :fingers-crossed: but just wanted to confirm. Appreciate any help!!
andee39 said:
Hi,
I currently have rooted S5, running MOAR with philz recovery. My phone has been running a bit wonky with quite a few problems and I think starting fresh as if I just opened the box with my shiny brand new S5 (instead of normal factory reset when flashing rom) would be the way to go. I have been searching and reading and to be honest, my head is spinning. I think this procedure is what I need to accomplish my goal :fingers-crossed: but just wanted to confirm. Appreciate any help!!
Click to expand...
Click to collapse
This is exactly what you need. However, I would suggest flashing TWRP and wiping internal storage before flashing. That way you are 100% brand new.
rwilco12 said:
This is exactly what you need. However, I would suggest flashing TWRP and wiping internal storage before flashing. That way you are 100% brand new.
Click to expand...
Click to collapse
Do you mean flashing TWRP and wiping internal storage before this procedure or after but before re-rooting and flashing rom? I would love to go back to using TWRP all the time but had heard there were issues if you ever needed to do a recovery so that is why I use philz, But I guess if you are referring to before this process then I could flash philz again after re-rooting.
Thanks so much for your assistance!
andee39 said:
Do you mean flashing TWRP and wiping internal storage before this procedure or after but before re-rooting and flashing rom? I would love to go back to using TWRP all the time but had heard there were issues if you ever needed to do a recovery so that is why I use philz, But I guess if you are referring to before this process then I could flash philz again after re-rooting.
Thanks so much for your assistance!
Click to expand...
Click to collapse
I would do it before and wipe data and internal. Then immediately boot to download mode and flash the one-click. You can root and flash Philz after that.
rwilco12 said:
I would do it before and wipe data and internal. Then immediately boot to download mode and flash the one-click. You can root and flash Philz after that.
Click to expand...
Click to collapse
Oakie dokie, that is what I will do. I do have one last question. When I rooted with CF Auto-Root and installed philz with Odin, you select the tar file in one of the boxes in Odin and then press start. Here it says to double click on exe, put phone in download mode and then press start in Odin. You don't need to select a file within Odin before pressing start? Hopefully not a completely dopey question.
Not a dopey question at all! The difference between this and most Odin packages is that this is in fact a One-Click Odin package. We have selected all the options and set everything up so that all you need to do is hit start and wait for the flash. No more accidentally loading something to the wrong slot or hitting the wrong button and having your device blow up in your hands. Ultimately it is the same process but simplified.
Hi,
I flashes ArchiDroid last night, the rom worked fine and everything was going alright. When I woke up during the middle of the night I noticed the phone was on the samsung logo but didn't think anything of it. This morning the battery was dead and it was still stuck on the samsung logo, it won't boot to recovery but does boot to download mode.
I've just tried flashing i9300 Vodafone OFW (not my carrier, but would it make a difference?) via Odin and get the following error message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
any help is greatly appreciated... im starting to think my nand is corrupt and that I can do nothing to fix it
Habe you tried flashing stock Rom and recovery?
Sent from my GT-I9300 using XDA Free mobile app
I think you should flash the original stock firmware to you device and it will surely work and again if u wanna root first apply cwm recovery
Bcoz its the best
sent by - $hivåm
deracmilan said:
Habe you tried flashing stock Rom and recovery?
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
The file I'm trying to flash in Odin is the stock i9300 Vodafone UK OFW so yeah, only difference is my phone is not on Vodafone, it's unlocked to all networks but I can't find OFW for that.
UrbanDesigns said:
The file I'm trying to flash in Odin is the stock i9300 Vodafone UK OFW so yeah, only difference is my phone is not on Vodafone, it's unlocked to all networks but I can't find OFW for that.
Click to expand...
Click to collapse
Your nand maybe corrupt try all options if they fail then try rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << only use as a last resort and read instructions carefully.
tallman43 said:
Your nand maybe corrupt try all options if they fail then try rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << only use as a last resort and read instructions carefully.
Click to expand...
Click to collapse
what other options would you suggest until I declare that as a last resort?
edit: is there anyway I can save my pictures before I continue with this?
also, how do i open the other options in odin?
UrbanDesigns said:
what other options would you suggest until I declare that as a last resort?
edit: is there anyway I can save my pictures before I continue with this?
also, how do i open the other options in odin?
Click to expand...
Click to collapse
If stock roms are failing to flash with nand error then their is not much more options to try other than emergency firmware you could try flashing a recovery like PhilZ recovery with odin and see if it will boot into that then try to make a backup. (but I don't hold out much luck with that).
If that fails try rescue firmware in the link I provided but if that fails than it is a service repair.
tallman43 said:
If stock roms are failing to flash with nand error then their is not much more options to try other than emergency firmware you could try flashing a recovery like PhilZ recovery with odin and see if it will boot into that then try to make a backup. (but I don't hold out much luck with that).
If that fails try rescue firmware in the link I provided but if that fails than it is a service repair.
Click to expand...
Click to collapse
How do am I able to add all the files to Odin when it's greyed out?
UrbanDesigns said:
How do am I able to add all the files to Odin when it's greyed out?
Click to expand...
Click to collapse
If you are having problems with odin then try a different version some work better than others. >> http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539 << 1.85 seems to work well for me.
tallman43 said:
If you are having problems with odin then try a different version some work better than others. >> http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539 << 1.85 seems to work well for me.
Click to expand...
Click to collapse
it says re-partition failed, maybe I used the wrong PIT file? the link you gave me does not provide the PIT file
UrbanDesigns said:
it says re-partition failed, maybe I used the wrong PIT file? the link you gave me does not provide the PIT file
Click to expand...
Click to collapse
I think the pit files is in the 4.1 download
tallman43 said:
I think the pit files is in the 4.1 download
Click to expand...
Click to collapse
it failed, guess it's hard bricked then.
damn.... no idea how the hell that happened.
UrbanDesigns said:
it failed, guess it's hard bricked then.
damn.... no idea how the hell that happened.
Click to expand...
Click to collapse
Sorry to hear that I don't think I have seen any success stories on here after the rescue firmware as not worked.:crying:
anybody know of a reputable repair guy who can replace the emmc chip?
I want to revert an ATT i717 rooted, with CWM ver.6, custom KK rom back to ATT stock rom (I did try KIES but it didn't recognize phone as I understand due to rom being custom.) I don't have a back up of the original stock rom. All download links I have come across are dead. Need help to locate working DL links.
2-Wifey has the same exact phone rooted with CWM ver. 6 with stock JB rom. I am wondering if I take a back up of that and flash it to my phone if that will be ok or if that's a chance for a brick?
jayinc11 said:
I want to revert an ATT i717 rooted, with CWM ver.6, custom KK rom back to ATT stock rom (I did try KIES but it didn't recognize phone as I understand due to rom being custom.) I don't have a back up of the original stock rom. All download links I have come across are dead. Need help to locate working DL links.
2-Wifey has the same exact phone rooted with CWM ver. 6 with stock JB rom. I am wondering if I take a back up of that and flash it to my phone if that will be ok or if that's a chance for a brick?
Click to expand...
Click to collapse
You have posted in the development forum. Try Q&A.
Also if you can't find Odin file here, try to search google. You may find an active somewhere else. Other than that, you can wait. if I ever get off work I could probably scrounge up a copy to my dropbox.
Let me know if you find. Sorry, I won't have time until tomorrow afternoon . In middle of a work marathon on 2 jobs.
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
jayinc11 said:
I want to revert an ATT i717 rooted, with CWM ver.6, custom KK rom back to ATT stock rom (I did try KIES but it didn't recognize phone as I understand due to rom being custom.) I don't have a back up of the original stock rom. All download links I have come across are dead. Need help to locate working DL links.
2-Wifey has the same exact phone rooted with CWM ver. 6 with stock JB rom. I am wondering if I take a back up of that and flash it to my phone if that will be ok or if that's a chance for a brick?
Click to expand...
Click to collapse
here's a link to stock jb:
https://drive.google.com/file/d/0B8CfFE5fSiMQS1NuZVZmUnRNYVU/view?usp=sharing
it includes the rom, cwm recovery, supersu, odin, kernel, and modem.
odin the rom first, then the recovery.
copy supersu to the phone and install thru cwm.
you'll need to update binaries.
also included is the current cwm recovery i use to install kit kat roms.
beenkenobee said:
here's a link to stock jb:
https://drive.google.com/file/d/0B8CfFE5fSiMQS1NuZVZmUnRNYVU/view?usp=sharing
it includes the rom, cwm recovery, supersu, odin, kernel, and modem.
odin the rom first, then the recovery.
copy supersu to the phone and install thru cwm.
you'll need to update binaries.
also included is the current cwm recovery i use to install kit kat roms.
Click to expand...
Click to collapse
Hey thanx! Just a quick question - what is to update binaries and how do I go about that?
captemo said:
You have posted in the development forum. Try Q&A.
Also if you can't find Odin file here, try to search google. You may find an active somewhere else. Other than that, you can wait. if I ever get off work I could probably scrounge up a copy to my dropbox.
Let me know if you find. Sorry, I won't have time until tomorrow afternoon . In middle of a work marathon on 2 jobs.
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
Click to expand...
Click to collapse
Hey thanx - I am following the d/l link from above. Unless otherwise think it will work out.
jayinc11 said:
Hey thanx! Just a quick question - what is to update binaries and how do I go about that?
Click to expand...
Click to collapse
once you get done installing and the phone booted up,
start supersu and follow the instructions.
beenkenobee said:
once you get done installing and the phone booted up,
start supersu and follow the instructions.
Click to expand...
Click to collapse
Finally d/l at work, odined the rom and encountered "Firmware upgrade encountered an issue, Please select recovery mode in kies and try again"
Phone cannot enter recov. mode nor download mode. I tried kies and 2 issues came up 1 my phone has no serial number, I entered wife's S/No. (same exact phone, both made in Korea) but the second problem is that kies wants me to turn off phone, and enter d/l mode which isn't coming up.
I tried my JIG thingy but same screen comes up.
How do I fix this?
ATTN: MOD
If need be please move thread as appropriate.
jayinc11 said:
Finally d/l at work, odined the rom and encountered "Firmware upgrade encountered an issue, Please select recovery mode in kies and try again"
Phone cannot enter recov. mode nor download mode. I tried kies and 2 issues came up 1 my phone has no serial number, I entered wife's S/No. (same exact phone, both made in Korea) but the second problem is that kies wants me to turn off phone, and enter d/l mode which isn't coming up.
I tried my JIG thingy but same screen comes up.
How do I fix this?
ATTN: MOD
If need be please move thread as appropriate.
Click to expand...
Click to collapse
i've restored using this many many times and never ran into a problem.
did you odin only the firmware tar?
possibly a bad d/l.
See below
beenkenobee said:
i've restored using this many many times and never ran into a problem.
did you odin only the firmware tar?
possibly a bad d/l.
Click to expand...
Click to collapse
Could be, really don't know for sure. Note has this screen. Anything I attempt it's resulting in the following screen below. DL mode, hit volume up and bam, same screen. Recovery, same deal, try to boot normally = same. Even a jig gets the DL mode first screen and then bam! Is there any way to fix this or Is the phone at the point of jtag repair, or worse a brick?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jayinc11 said:
Could be, really don't know for sure. Note has this screen. Anything I attempt it's resulting in the following screen below. DL mode, hit volume up and bam, same screen. Recovery, same deal, try to boot normally = same. Even a jig gets the DL mode first screen and then bam! Is there any way to fix this or Is the phone at the point of jtag repair, or worse a brick?
Click to expand...
Click to collapse
uninstall kies.
reinstall the usb driver if needed and try again.