Hi Guys
Yesterday I changed from Android 4.3 to Kitckat 4.4 Omni Rom.
The problem i am having is my PC (windows 8) is now not recognizing the phone 100%. When i plug my phone in the pc makes that sound indicating that a device has been connected to it but it does not display in File Manager. When I disconnect the phone the PC makes that sound indicating that the device has been disconnected. So it is recognizing it to some extent but it is not available in file manager. Phone is charging when connected.
Kies does not recognize the phone at all however Wondershare MobileGo for Android does.
I have tried the following.
Installed drivers found on this forum
Installed Kies & its drivers
Various combinations of uninstalling and reinstalling the drivers
Various combinations of disconnecting and rebooting the phone and the pc
Tried 3 different cables.
.
Search and follow a guide on how to completely remove usb devices from windows 8.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Search and follow a guide on how to completely remove usb devices from windows 8.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Hi boomboomer
Thanks for the reply, but I dont understand your solution. I cannot even find my device let alone remove it.
Your problem is in windows 8, where a conflict exists. Use Google to search for a step by step guide.
Sent from my GT-I9300 using Tapatalk
Frogstar007 said:
Hi Guys
Yesterday I changed from Android 4.3 to Kitckat 4.4 Omni Rom.
The problem i am having is my PC (windows 8) is now not recognizing the phone 100%. When i plug my phone in the pc makes that sound indicating that a device has been connected to it but it does not display in File Manager. When I disconnect the phone the PC makes that sound indicating that the device has been disconnected. So it is recognizing it to some extent but it is not available in file manager. Phone is charging when connected.
Kies does not recognize the phone at all however Wondershare MobileGo for Android does.
I have tried the following.
Installed drivers found on this forum
Installed Kies & its drivers
Various combinations of uninstalling and reinstalling the drivers
Various combinations of disconnecting and rebooting the phone and the pc
Tried 3 different cables.
.
Click to expand...
Click to collapse
Did you disable driver signature when installing new drivers in windows 8 ? Also you could try another file manager for windows like Free Commander or Total Commander or other alternatives that are about...
OP, i 'm exactly having the same problem. I don't know what to do anymore :\
Have you found any solution?
ilovehc said:
OP, i 'm exactly having the same problem. I don't know what to do anymore :\
Have you found any solution?
Click to expand...
Click to collapse
Mine turned out to be a faulty data cable.
what about windows 7? Just ran into this very same situation!
Related
When I plug my phone into my computer, it is no longer recognized by windows. It used to... now it doesnt...
I have googled this
I have checked the forums
I have NOT found a solution that works
I have tried booting my phone while it's plugged in.
I have tried reinstalling kies.
The phone comes up as "uknown device" in the usb section of device manager, when i specify the 64bit drivers(I'm running win7 pro 64) it says drivers are up to date! and then proceeds not to work.
I have also tried setting my phone into usb debugging mode.
I have tried all my computers usb ports.
If anyone knows how to help me I'd really appreciate it.... and if I've blindly missed something feel free to call me a moron so long as you successfully help me
chaosthebomb said:
When I plug my phone into my computer, it is no longer recognized by windows. It used to... now it doesnt...
I have googled this
I have checked the forums
I have NOT found a solution that works
I have tried booting my phone while it's plugged in.
I have tried reinstalling kies.
The phone comes up as "uknown device" in the usb section of device manager, when i specify the 64bit drivers(I'm running win7 pro 64) it says drivers are up to date! and then proceeds not to work.
I have also tried setting my phone into usb debugging mode.
I have tried all my computers usb ports.
If anyone knows how to help me I'd really appreciate it.... and if I've blindly missed something feel free to call me a moron so long as you successfully help me
Click to expand...
Click to collapse
Rom? etc.
Sent from my GT-I9000 using XDA Premium App
Stock with a voodoo kernel, do I need to turn voodoo off?
chaosthebomb said:
Stock with a voodoo kernel, do I need to turn voodoo off?
Click to expand...
Click to collapse
I have noticed that some ROM's will enable debugging, I personally run a MAC. But you may want to check those settings to see if its enabled/disabled. But if your charging on it you should be good. Have you tried to odin back to stock and seeing if that helps?
Other thing: do you have the samsung drivers installed on your PC? even if you don't you should still see the external storage just not the internal.
lovemysgs said:
I have noticed that some ROM's will enable debugging, I personally run a MAC. But you may want to check those settings to see if its enabled/disabled. But if your charging on it you should be good. Have you tried to odin back to stock and seeing if that helps?
Other thing: do you have the samsung drivers installed on your PC? even if you don't you should still see the external storage just not the internal.
Click to expand...
Click to collapse
Reinstalk drivers as he said
Sent from my GT-I9000 using XDA Premium App
I should have listed this before... I reinstalled the drivers first before reinstalling kies or checking out device manager
chaosthebomb said:
I should have listed this before... I reinstalled the drivers first before reinstalling kies or checking out device manager
Click to expand...
Click to collapse
Any other devices recognize it?
Sent from my GT-I9000 using XDA Premium App
What rom are you using? If you are running one of the test CM7 builds you have to download the Google drivers from the Android SDK.
Does your phone show up when you mount it as external memory? Did you install the drivers and kies as an administrator?
exact same scenario!
I am having the exact same issues as the OP! Except that i have the unbranded gt-i9000. My galaxy s is completely stock, no custom firmware or launchers. Heck, after the last factory reset, not even any apps!
I have tried every suggestion on every search i could do. I have 4 computers with xp sp3, win7 sp1, ubuntu 10.04.1, and mac os x 10.5.8. Nothing is working on any of them. I've even tried different usb cables, just to rule that out.
Could it be a samsung hardware issue?
Hello, sorry for starting a new thread..
But i've read on all forums and websites still not found a solution.
I have:
Reinstalled kies
Checked all settings on the phone
Tried diffrent cables
Tried connect without kies installed
Tried with kies installed but not turned on
Rebooted phone and computer
Tried to connect in all usb "holes"
Tried using diffrent usb adapters
AND SO ON...
I've tried all things i could find..
But when i look in device manager i cant find drivers for my GT-I9100 with ICS 4.03
I'm doing everything i can come up with, and still it wont istall any drivers for my phone?
So how do i get the drivers?, if thats the problem....
EDIT: Tried with 2 diffrent computers with diffrent os, still dosent work...
Have you tried different USB ports on your computer?
Going to give it a try
Sent from my GT-I9100 using xda app-developers app
anotaren said:
Hello, sorry for starting a new thread..
But i've read on all forums and websites still not found a solution.
I have:
Reinstalled kies
Checked all settings on the phone
Tried diffrent cables
Tried connect without kies installed
Tried with kies installed but not turned on
Rebooted phone and computer
Tried to connect in all usb "holes"
Tried using diffrent usb adapters
AND SO ON...
I've tried all things i could find..
But when i look in device manager i cant find drivers for my GT-I9100 with ICS 4.03
I'm doing everything i can come up with, and still it wont istall any drivers for my phone?
So how do i get the drivers?, if thats the problem....
Click to expand...
Click to collapse
1. is your phone rooted? if yes, i believe kies cannot detect rooted phone
2. definitely not the problem of XP, i have no problem with my XP, one possibility could be your XP something corrupted, suggest you try on other pc.
Kies can detects rooted phones so that is not an issue.
You could put your phone in Download mode, and connect it to your pc and then run odin. If Odin detects it then it is not your drivers. If Odin cannot find a phone then obviously there is an issue with the drivers.(btw you dont have to do anything in odin for it to find it)
stanxx said:
1. is your phone rooted? if yes, i believe kies cannot detect rooted phone
2. definitely not the problem of XP, i have no problem with my XP, one possibility could be your XP something corrupted, suggest you try on other pc.
Click to expand...
Click to collapse
No, I want to but my pc wont recognize it..
...
Syrellaris said:
Kies can detects rooted phones so that is not an issue.
You could put your phone in Download mode, and connect it to your pc and then run odin. If Odin detects it then it is not your drivers. If Odin cannot find a phone then obviously there is an issue with the drivers.(btw you dont have to do anything in odin for it to find it)
Click to expand...
Click to collapse
It wont find it all..
But as said the problem is that i dont have drivers at all on my computer for my phone, still i have latest update of kies..
Then do waht MistahBungle says. If your drivers arent installed kies is doing something wrong. Uninstall kies, delete the entire remaining Kies folder from program files, Clean up your registry and reboot your pc.
Once you have done that, Redownload Kies from the samsung website, make sure its the windows 32 bit(x86) version(as im guessing you are running that as XP) and install it.
Once it is installed. Reboot your computer. Turn your phone on and make sure USB debugging is completely turned off and then plug the phone in to your pc.
MistahBungle said:
Given you say you've tried *everything*, if it were me, I'd try a different PC. If it still doesn't work, user error; probably something really simply we're missing/you're not doing. Impossible to say what it is as we're not there with you looking over your shoulder.
Actually, I saw a thread on here last week, someone had tried everything like you & they fixed it by uninstalling Kies, removing Kies registry entries, rebooting, downloading/installing a fresh copy of Kies (for the drivers), running Windoze Update, rebooting. Fixed. Maybe try this before another PC.
You also must check Windoze Task Manager & kill Kies/any associated processes. You only want the drivers, not Kies/it's processes running when you use Odin.
Click to expand...
Click to collapse
Going to try it with my laptop and hope for the best..
...
Hello All,
i had a problem with my phone every time plugging in galaxy s3 into windows (xp or 7) i kept getting no hardware id found after flashing my last rom.
just thought i would share how i resolve. very simple steps...
power off and remove battery
uninstall any drivers from windows
insert battery
power on device
once fully booted plug device back into windows and let it search for drivers.
all "should" now be working.
just thought it would be helpful to share as took me a while to find information online.
Got the same problem, with the difference that my S3 is fresh out of the box. Installed kies, drivers. Tried all of the usb-ports but nothing seem to work.
Was looking to root it but the connection (looks to me) would be an must...
W7
64 bits
Standard instructions are to use Samsung cable and a USB port on the motherboard .
jje
JJEgan said:
Standard instructions are to use Samsung cable and a USB port on the motherboard .
jje
Click to expand...
Click to collapse
jups, tried several cables and all of my usb-ports. Still no marriage between phone and desktop
funnily enough i just had this happen to me on my win 7 64bit ultimate, havent flashed any new roms just stock with cf root. All of a sudden my comp gave the sound effect if something was disconnected and I just got hardware id missing.
It did resolve itself though after I rebooted both phone and pc so unfortunately cant narrow it down further.
sandeman11 said:
Got the same problem, with the difference that my S3 is fresh out of the box. Installed kies, drivers. Tried all of the usb-ports but nothing seem to work.
Was looking to root it but the connection (looks to me) would be an must...
W7
64 bits
Click to expand...
Click to collapse
Is KIES loading while you are trying? If so, shut it down.
I've never had to load drivers. Windows always finds them on it's own.
missing hardware id (Win7 64 Home)
Same Problem for me.
I have never used Kies, but installed des Samsung Driver Package Ver. 1.5.6.0 .
For 3 month all worked fine with 2 Galaxy S III, 2 S II and 1 S I.
Since yesterday i have this trouble. Reinstall drivers, shut down phone... nothing helps. Changing USB-Ports, nothing...
Running on Stock XXBLG8 wird Syiha 1.5 or Speedmod K1-8 Kernel.
Would be fine if there is a fix or at least idea how to solve this
Just so everyone knows, the way i fixed this was very simple.
1. Uninstall Kies and All Drivers
2. Reboot Into Recovery (If Roooted)
3. Wipe Cache and Dalvik
4. Fix Permissions
5. Install LG8 Rom (rom installer from UpdateMe)
6. Reboot Phone
7. Disconnect From Internet (PC/MAC)
8. Re-Install Kies
9. Connect Phone to PC/MAC
10. Let Phone Install Drivers Again with Kies
11. Should Be Good-to-Go
1
-On Control Panel go to Programs and Features find Samsung mobile USB drivers and uninstall it, conect phone on PC via USB cable and wait for drivers to install.
or
2
-Use Kies and klik Troubleshoot problems with connectivity
That should solve the problem
nexusino said:
1
-On Control Panel go to Programs and Features find Samsung mobile USB drivers and uninstall it, conect phone on PC via USB cable and wait for drivers to install.
or
2
-Use Kies and klik Troubleshoot problems with connectivity
That should solve the problem
Click to expand...
Click to collapse
I actually tried that and didnt work for me so i started from scratch as if the PC never connected with the phone before.
nexusino said:
1
-On Control Panel go to Programs and Features find Samsung mobile USB drivers and uninstall it, conect phone on PC via USB cable and wait for drivers to install.
or
2
-Use Kies and klik Troubleshoot problems with connectivity
That should solve the problem
Click to expand...
Click to collapse
this worked for me but i have to repeat the process every time in reconnect my phone to the pc
It works
Hi guys,
I think I figured it out.
I was reading posts about this issue on multiple forums and there was one that caught my attention (I cannot remember where it was exactly- it was late in the night).
The thing is that the current Windows running PC's (or most of them) does not have the latest drivers and updates installed.
First I tried connecting my Galaxy S3 to the PC (which was not updated) and had the same errors you guys have. Then I connected it to my home laptop and this did not work as well. Today when I went into the office (@work) i tried again there and it worked flawlessly. Then it hit me:
The IT dept keeps the laptops and all the infrastructure up to date (including Windows updates). Therefore I tried again at home but this time with Windows up to date and guess what...it worked on both PC and laptop !
What I did (please keep in mind that all of my laptops and PC's are running Windows 7 - not sure if it works on older Windows versions):
1) Uninstall Kies and the related USB driver it installs (Control panel -> Programs and features)
2) Let Windows install the latest updates (Control panel -> Windows Update) and let it reboot your machine and finish installing things.
3) After you're logged back into Windows just plug your USB cable into the phone and PC/Laptop on any of the USB ports and it works !
Hope this helps !
Regards,
Mike
wtf i update kies software, here the same problem. :crying::crying:
i reinstall Kies more then 3x, but the problem is exist!
i try other usb connection, same problem..
now when i connect my Galaxy S2, same prob.
and all that after i update Kies Software to 2.3.
Where can i found an older Version?
Greetings
---------- Post added at 10:34 PM ---------- Previous post was at 10:17 PM ----------
Samsung Composite Driver is exactly the Problem on Windows 7 X64!
I installed these drivers SAMSUNG_USB_Driver_for_Mobile_Phones and this solved my problems with the ID issue. Here is the link https://www.dropbox.com/s/fm9b12xy3r0t07b/SAMSUNG_USB_Driver_for_Mobile_Phones.zip. Good luck guys
i try it with only Windows Update Driver that was not the Solution, that was without ADB Support..
I resolve the Problem, :good: if anyone have the Problem further, try this..
- uninstall all Samsung Driver & Kies from your System
- then you need the tool USBDeview
- uninstall with that tool all unused or Samsung USB Driver from your Sys
- Reboot your Machine
- after that clean your registry (example with CCleaner)
- Reinstall or Update your Motherboard System Driver (Only USB)
- Reboot your Machine
- Install Now Samsung Kies again
- again Reboot your Machine
- and last disable USB Debugging on your Phone and activate it again
now you can plug your Device and hopefully with MTP and ADB Support and without Hardware ID Error.
Best Regards
This happened to me since I updated Kies. What works for me:
Go to settings -> more (under data usage) -> USB Utilities -> connect storage to PC -> OK
Windows now does recognise the phone and you can browse the phone as a drive. Kies will give you an error.
Turn off USB Storage, disconnect the phone.
Take out the USB cable and put it back in and Windows should detect the phone properly now and Kies will recognise it too.
this worked for me first time
Flashed rom, new error of mulfunctional USB and not recognized phone on USB. Interesting is, that another phone, but the same type, same ROM was recognized. Nothing from above helped (reinstalled progs, restarts, reinstalled ROM, tweeking in kies)
Helped only reinstalled drivers posted above by gee2012 (SAMSUNG_USB_Driver_for_Mobile_Phones)! Thanks for this.
gee2012 said:
I installed these drivers SAMSUNG_USB_Driver_for_Mobile_Phones and this solved my problems with the ID issue. Here is the link https://www.dropbox.com/s/fm9b12xy3r0t07b/SAMSUNG_USB_Driver_for_Mobile_Phones.zip. Good luck guys
Click to expand...
Click to collapse
Big thanks, these drivers sorted it out for me though the ones you hosted have gone from your dropbox I found more easy enough because of the name you supplied.
Just out of interest are those having this problem using an AMD chipset or a gigabyte motherboard? My main PC has both and its the only system I am having this issue with.
had this happen again after flashing a new rom from a full wipe. un installed the drivers then reconnected and fixed the issue.
Zrbyte said:
Big thanks, these drivers sorted it out for me though the ones you hosted have gone from your dropbox I found more easy enough because of the name you supplied.
Just out of interest are those having this problem using an AMD chipset or a gigabyte motherboard? My main PC has both and its the only system I am having this issue with.
Click to expand...
Click to collapse
Funnily enough yes, I am using a FX-6100 and a GIGABYTE GA-970-DS3
Hi guys!
I have a rooted international Galaxy S3 (i9300) phone with a custom rom: UltimaRom (version 8.x), and using XXELLA kernel (?) and XXELLA Modem version.
Since a while, I'm trying to manage the files in it (phone memory or sd card) from my computer, simply by using an USB cable (the one given with the phone or even other cables, it doesn't matter) and the standard MTP protocol, which is used by Google since Android 3.0. And, whatever I try to do, Windows doesn't seem to notice anything. In my device manager, nothing appears. Nothing either in the "My Computer" window, it just doesn't "exist". No reaction at all from Windows. The Phone's charging, but this is all it is.
And I have the same problem using another computer (like my own laptop, or my brother's one). All computers are running Windows 8 x64 Pro.
I tried to install, re install, delete, etc. all the phone drivers I have on this computer, tried to install Samsung Kies, tried some "mounting" apps on the Play Store, nothing's working.
What should I do to make it work?
Thanks a lot!
Might be stating the obvious but is your phone set at usb debugging? I have the same issue from time to time but when I unplug and plug back it fixes itself.
Hope you get your stuff fixed soon.
Sent from my GT-I9300 using xda app-developers app
Thanks for your response.
Yes, USB Debugging is enabled.
Jiraiya-08 said:
Hi guys!
I have a rooted international Galaxy S3 (i9300) phone with a custom rom: UltimaRom (version 8.x), and using XXELLA kernel (?) and XXELLA Modem version.
Since a while, I'm trying to manage the files in it (phone memory or sd card) from my computer, simply by using an USB cable (the one given with the phone or even other cables, it doesn't matter) and the standard MTP protocol, which is used by Google since Android 3.0. And, whatever I try to do, Windows doesn't seem to notice anything. In my device manager, nothing appears. Nothing either in the "My Computer" window, it just doesn't "exist". No reaction at all from Windows. The Phone's charging, but this is all it is.
And I have the same problem using another computer (like my own laptop, or my brother's one). All computers are running Windows 8 x64 Pro.
I tried to install, re install, delete, etc. all the phone drivers I have on this computer, tried to install Samsung Kies, tried some "mounting" apps on the Play Store, nothing's working.
What should I do to make it work?
Thanks a lot!
Click to expand...
Click to collapse
That's odd.. I use Ultima ROM and have updated to 8.1.1. I just checked just to make sure (my last update was done OTA) and yeah, computer recognized phone right away.. heard a little computer sound and everything. I am also running Windows 8
The base changed in v8. If you haven't done a fac reset since then you should try that.
Ok I just tried to make a factory reset, nothing changes...
Oh, and if that can help: when the phone's booting, Windows says "Unrecognized device". When it's booted up, it disapears.
Anyone ?
Drivers...
I used these drivers.
It worked for me...
http://forum.xda-developers.com/showthread.php?t=1564104
Work for me too! THX
Thanks for your help !
Unfortunately it didn't work for me.... :/
Any other ideas ?
Sorry to keep rising this thread but this issue is really annoying... :/
Up
I still have the same problem. No other ideas please ?
? :/
Does Easy UMS work?
Can you connect via adb?
Does Odin recognize the phone?
If no to all of the above, try a different cable / port
Glebun said:
Does Easy UMS work?
Can you connect via adb?
Does Odin recognize the phone?
If no to all of the above, try a different cable / port
Click to expand...
Click to collapse
Thank you for your response !
- Easy UMS doesn't seem to work, even if the app doesn't show any error on the phone
- How do I connect via ADB ? I tried to connect the phone while it is in Download Mode, nothing appears on Windows or Odin
- As I said, in Download Mode, Odin doesn't seems to recognize anything...
And of course, I already tried to change the cable, the USB port, or even the computer i'm connecting the phone to...
Thanks again for your help
Starting to sound like a damaged micro USB port on the phone possibly, or a driver's problem
Oh, and there's a thing: when I reboot the phone, while the Samsung logo appears on the screen with the short jingle, the PC makes 3 or 4 times a sound like something has been plugged, and showes a "Unrecognized device" warning window. When the boot is finished, and the rom is loaded, everything just disappears and no sound is any longer made by the PC.
Also, please note that when I connect the phone to the PC (using the same PC, cable and USB port of course), the phone charges up just like before, without any problem.
have you tried the old drivers?
search Google for " Samsung USB drivers 1.4.6.0 "
disconnect your computer from the internet
Install the drivers.
don't reconnect to the internet.
connect your phone and let windows find the drivers
tried the following:
-use other computer(also w7 64bit--»same issue)--both are asus laptops home premium version iof windows
-install official samsung drivers, no difference
-usb debugging on/off with mtp»no difference
-factory reset(4.04 currently)
-Uninstall and reinstall drivers
All in all windows does not recognize this tablet for me. I just bought this tablet,
Something im doing wrong?
The tab charges fine via wall charger
I just want to put files on this tablet with windows via usb.
Please help me sort this out.
Have you tried plugging in the tablet with the drivers being uninstalled? It may work. I've had this problem before but I had Kies installed on the pc and all I had to do was update the program.
Jay Rock said:
Have you tried plugging in the tablet with the drivers being uninstalled? It may work. I've had this problem before but I had Kies installed on the pc and all I had to do was update the program.
Click to expand...
Click to collapse
Yea i did but windows still gives the same "usb device not recognized" . Ill try removing everything concerning drivers and will try again
Ow and btw GTP7510MAYXAR is the model.
http://forum.xda-developers.com/showthread.php?t=1837529
i have the exact same problem. HElluuuup! :crying:
teun3sixty said:
http://forum.xda-developers.com/showthread.php?t=1837529
i have the exact same problem. HElluuuup! :crying:
Click to expand...
Click to collapse
My Windows 7 64 bit system has no problems recognizing my P7510.
The only times when I've seen that error (unrecognized device) is when the cable I was using was bad. I wasted several days fighting that.
The only other suggestion is to plug in the tablet, then bring up the device manager. Right click on the failed device and choose "Uninstall". Disconnect, then remove Kies, remove the drivers, then reinstall Kies and the drivers. Maybe that'll get it recognized.