Hi,
I try to install custom rom in my Galaxy S3.
I do this steps:
1. I have to Root my phone, I check with root checker app and all i OK.
2. Install GooManager from store and install openrecoveryscript
3. Downloaded omni rom: omni-4.4.2-20140320-i9300-NIGHTLY
4. Uploaded room on SD card in my phone.
5. Start phone in recovery mode and do: "wipe data/factory reset"
6. After wipe data, i have try to: "apply update from external storage" and chose omni zip file
7. I recive an error: failed to verify whole-file signature signature verification failed
EDIT:
Also I have try this way:
1. root my phone
2. install twrp
3. From TWRP menu chose: reboot/recovery
4. From recovery menu "update package from external storage" and chose omni file
5. Still recive same error, i try with two different omni builds.
djsowa01 said:
Hi,
I try to install custom rom in my Galaxy S3.
I do this steps:
1. I have to Root my phone, I check with root checker app and all i OK.
2. Install GooManager from store and install openrecoveryscript
3. Downloaded omni rom: omni-4.4.2-20140320-i9300-NIGHTLY
4. Pploaded room on SD card in my phone.
5. Start phone in recovery mode and do: "wipe data/factory reset"
6. After wipe data, i have try to: "apply update from external storage" and chose omni zip file
7. I recive an error: failed to verify whole-file signature signature verification failed
EDIT:
Also I have try this way:
1. root my phone
2. install twrp
3. From TWRP menu chose: reboot/recovery
4. From recovery menu "update package from external storage" and chose omni file
5. Still recive same error, i try with two different omni builds.
Click to expand...
Click to collapse
(1) What phone model do you have?
(2) When you flash roms you do not need to root your phone! roms come already rooted you only root if you are going to stay on stock rom and install root apps.
(3) Don't use apps to install roms use recovery PhilZ,Cwm,Twrp
Dont know much about Twrp but in other recoveries it should say install zip not update zip (Twp might be different)
1. I have I9300
2. Ok.
3. I use TWRP application to enter into recovery mode. When I chose reboot/recovery from app menu then my phone is rebooting and entering into recovery mode.
There is only "update" option in recovery menu, other options is:
-reboot system now
-apply update from ADB
-apply update from external card
-wipe data/factory reset
-wipe cache partiotion
-apply update from cache
Thats the stock recovery.
Cwm, twrp, philz recovery are not apps. They are recoveries you must flash that will substitute the stock recovery.
Look into the stickies, philz touch recovery post, etc to see how to flash the recovery you want.
djsowa01 said:
1. I have I9300
2. Ok.
3. I use TWRP application to enter into recovery mode. When I chose reboot/recovery from app menu then my phone is rebooting and entering into recovery mode.
There is only "update" option in recovery menu, other options is:
-reboot system now
-apply update from ADB
-apply update from external card
-wipe data/factory reset
-wipe cache partiotion
-apply update from cache
Click to expand...
Click to collapse
Ok please read the stickies/guides about flashing roms you are not doing it right you need to do a full wipe including system but please read up on how to do this or you will be left without a rom/system on your phone. (And always backup your old rom and efs very very important!! )
---------- Post added at 02:58 PM ---------- Previous post was at 02:56 PM ----------
dxppxd said:
Thats the stock recovery.
Cwm, twrp, philz recovery are not apps. They are recoveries you must flash that will substitute the stock recovery.
Look into the stickies, philz touch recovery post, etc to see how to flash the recovery you want.
Click to expand...
Click to collapse
+1
Related
I would like to install VillainRom 3.0 on my GS2
http://forum.xda-developers.com/showthread.php?t=1198334
I already have
Root acces
CWM
Base Band: I9100UHKD8
Kernel: [email protected] #2 (CF-ROOT)
Build number: GINGERBREAD.UMKK1
but obviously as a noob I have to many questions..
It is compatible with my phone
It is complicated to install?
Thanks
Regards
yes, it is compatible with your phone.
Just read, understand and then follow the developers instruction on lash with cwm.
Cosmic Blue said:
yes, it is compatible with your phone.
Just read, understand and then follow the developers instruction on lash with cwm.
Click to expand...
Click to collapse
Where to start.. In CWM after save villain on SD, just flash update.zip?
Coming from Another ROM
Ensure CWM recovery is available, do a CWM/nandroid backup and titanium backup, and put the zip onto the root of the internal SD.
Enter CWM, carry out a factory reset, and cache wipe, and flash the ROM via "Install zip from SD" option.
Reboot the phone into VillainROM, bearing in mind the first boot may take some time on the boot animation.
Click to expand...
Click to collapse
1. download and copy the villian zip file to your sd card after making a back up of your data.
2. go into cwm- boot into recovery, clean cache. Stay in recovery mode.
3. go advanced and clean dalvik cache. Stay in recovery mode
4 select install zip file.
5. choose zip from sd card, scroll down to the zip file you have download.
6. select and agree to install.
7. let it install, scroll back up to reboot system.
8. rom will install it may take up to 5 minutes for the first install.
You can scrool up down in recovery mode by using the volume keys. power button or homke button selects depending on what version of cwm you have.
back button returns you back on screen.
Cosmic Blue said:
1. download and copy the villian zip file to your sd card after making a back up of your data.
2. go into cwm- boot into recovery, clean cache. Stay in recovery mode.
3. go advanced and clean dalvik cache. Stay in recovery mode
4 select install zip file.
5. choose zip from sd card, scroll down to the zip file you have download.
6. select and agree to install.
7. let it install, scroll back up to reboot system.
8. rom will install it may take up to 5 minutes for the first install.
You can scrool up down in recovery mode by using the volume keys. power button or homke button selects depending on what version of cwm you have.
back button returns you back on screen.
Click to expand...
Click to collapse
Thanks.. simple and detailed, thats what a noob (like me) need
update: Instaled Villain 3.0 + Sk0pdr0id 1.6
I got a problem whit my sgs+. It doesnt go anywheare from cwm 5.504. I tried to install CyanogenMod 9 and it actually installed but when i reboot it does the reboot and comes back to CWM. I followed thease intructions:
Installation:
Back up your apps with TitaniumBackup. Backup your SMS with SMS Backup & Restore and your call logs with Call log Backup & Restore. Export your contacts to a .vcf file.
First a special version of CWM recovery is needed, FeaMod does not work because it does not set partition sizes for CyanogenMod 9 correctly. The new recovery can restore FeaMod Recovery backups in case you want to return to one later. There are many ways how to install the recovery, choose one:
Flash CWM5504-CM9-recovery.zip inside FeaMod (boot into recovery, apply update from sdcard) or stock recovery
or use Quickflasher from broodplank:
Connect phone via USB, start sgsflasher_x86.exe, activate "Flash a new Recovery", select the recovery.img and press "Start Now".
or use Odin to flash recovery-clockwork-5.5.0.4-ariesve.tar.md5 as One Package using the regular AriesVE.ops (Tutorial)
or flash recovery.img using the command line/adb by putting it on your sdcard and executing the commands:
adb shell
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p13
CyanogenMod9 comes as a zip that is installed inside recovery. Download cm-9-20121023-EXPERIMENTAL-ariesve-beta3.zip and put it on your sdcard.
Reboot into CWM Recovery
Perform a backup!
Wipe data/factory reset
Wipe Cache partition
Advanced > Wipe dalvik cache
Install zip from sdcard (choose cm-9-20121023-EXPERIMENTAL-ariesve-beta3.zip)
.........................................................................................
So the .zip file seesms to install but my phone doesnt open up whit cyancolen or the stock rom... In the recowery menus i can do anythin i want but i think i dont do the righy things so could someone help me?
thanks
Try clearing cache and dslvik cache in recovery and then reboot. . .
Sent from my Apple IIe
Hi, finlandpetu, I've had the same Problem, and I think you have to flash a new Bootloader. Look at this Thread. :good:
lecter100 said:
Hi, finlandpetu, I've had the same Problem, and I think you have to flash a new Bootloader. Look at this Thread. :good:
Click to expand...
Click to collapse
had the same problem and this helped
I have been trying to install Resurruction Rom and here is my present status
Build - XXLQ6
ROM - SiyahKernel S2-v6.0beta4
The phone is presently rooted and is on ICS.
My next question (I have read the OP and here is what it has)
Reboot into recovery (Turn off your phone then press and hold the keys: Volume Up + Power + Home)
Wipe Data / Factory Reset
Install the Main ROM file -- Wat does this mean ?? Is it "Apply update from SD Card ??
In AROMA installer select "Custom Installation" -- Is this after the reboot ??
Choose depending of your taste
When AROMA installer finish untick the "Reboot Now" option
When you're back on the recovery go to Advanced
Wipe Dalvik Cache
Fix Permissions
Wipe Cache Partition
Reboot
When you get the step for add your Google Account, if you don't have a WiFi enabled or you can' add it, skip it
When you boot into the system, it's probably that you don't have data enabled (3g, H+) just reboot the phone
When you boot again into the system, the data will be enabled and you can do the configuration of Google Account (if you don't do this step before)
This is the moment for install all the extras like themes, mods, fixes, kernels, etc.
¡Enjoy!
Please help me with those 2 steps people..
Coolkriss said:
Reboot into recovery (Turn off your phone then press and hold the keys: Volume Up + Power + Home)
Wipe Data / Factory Reset
Install the Main ROM file -- Wat does this mean ?? Is it "Apply update from SD Card ??
In AROMA installer select "Custom Installation" -- Is this after the reboot ??
Please help me with those 2 steps people..
Click to expand...
Click to collapse
1) It means that you have to install the zip-file you've downloaded. So, just the rom-file. In Recovery, just go to 'Install zip from sd-card'.
2) No. When you flash the rom, Aroma will be started automatically from CWM (you'll see it when you try it).
So, boot into Recovery, make a Nandroid backup, do a full wipe, Install zip from sd-card (the rom-file), Aroma will be started, press Custom Installation, don't reboot afterwards but follow the steps that are written in the RR-thread.
Sent from the Matrix
Thanks man.. Am all set now .. cool
<snip>
Hi,
I decided to flash the Cosmic ROM on my rooted Quattro. I downloaded the rom to sdcard0, but now when I booted into the CWM, I am getting the following menu options:
reboot system now
Apply update from ADB
Apply update from SDCARD
wipe data/factory reset
wipe cache partition
apply update from cache
#MANUAL MCDE#
--Apply Multi-CSC..
Applied the CSC code:INS
Successfully applied multi-CSC
When I chose "apply update from SDCARD", I got no options, except the one which took me back me to the CWM main menu. The output was:
#MANUAL MCDE#
--Apply Multi-CSC..
Applied the CSC code:INS
Successfully applied multi-CSC
E: unknown volume for path [/SDCARD]
On the other hand, when I was rooting my phone, I had seen an option of "install .zip", but I can't see it now. Can you tell me what can I do to flash the rom now?
Please forgive me if this is a very silly question because as you may realise I am a noob to this Android world.
Best Regards
CWM
krittin98 said:
Hi,
I decided to flash the Cosmic ROM on my rooted Quattro. I downloaded the rom to sdcard0, but now when I booted into the CWM, I am getting the following menu options:
reboot system now
Apply update from ADB
Apply update from SDCARD
wipe data/factory reset
wipe cache partition
apply update from cache
#MANUAL MCDE#
--Apply Multi-CSC..
Applied the CSC code:INS
Successfully applied multi-CSC
When I chose "apply update from SDCARD", I got no options, except the one which took me back me to the CWM main menu. The output was:
#MANUAL MCDE#
--Apply Multi-CSC..
Applied the CSC code:INS
Successfully applied multi-CSC
E: unknown volume for path [/SDCARD]
On the other hand, when I was rooting my phone, I had seen an option of "install .zip", but I can't see it now. Can you tell me what can I do to flash the rom now?
Please forgive me if this is a very silly question because as you may realise I am a noob to this Android world.
Best Regards
Click to expand...
Click to collapse
bro u need to flash cwm trough Odin
Thanks for replying. Do you mean to say that my phone is not rooted?
CWM and root are diferent things. Install CWM via Odin an then flash the ROM, look at this topic: http://forum.xda-developers.com/showthread.php?t=2494471
reply
caiquejd said:
CWM and root are diferent things. Install CWM via Odin an then flash the ROM, look at this topic: http://forum.xda-developers.com/showthread.php?t=2494471
Click to expand...
Click to collapse
I followed the steps as stated at http://trueandroid.com/install-cloc...-4-5-on-galaxy-grand-quattro-gt-i8552-how-to/
But, I am getting the same menu as mentioned in the first post of the topic.
Edit 1:
At the time of rooting, I had followed the steps as mentioned at http://www.youtube.com/watch?v=C1kEc7GipYU and flashed with CWM Recovery 6.0.4.5. So, shouldn't the CWM be present there in my phone as it is already rooted?
krittin98 said:
I followed the steps as stated at http://trueandroid.com/install-cloc...-4-5-on-galaxy-grand-quattro-gt-i8552-how-to/
But, I am getting the same menu as mentioned in the first post of the topic.
Edit 1:
At the time of rooting, I had followed the steps as mentioned at http://www.youtube.com/watch?v=C1kEc7GipYU and flashed with CWM Recovery 6.0.4.5. So, shouldn't the CWM be present there in my phone as it is already rooted?
Click to expand...
Click to collapse
After rooting the phone will not have CWM, root only give permission to modify the system.
Do this, after flashing CWM (not root) dont let the phone boot normaly, instead boot on recovery (home + vol up), and then go and select option to reboot system then "Disable flash recovery" will appear, select "yes".
The stock rom flash stock recovery after boot so you will lose the CWM, so doing what I say this wont happen [emoji6]
Root access not working.
Already tapped build number 7 times, enabled root in developer settings by changing none to apps & adb (nothing works)
Then somewhere in thread i saw a person saying change apps & adb to apps only (still not working)
What should I do ?
Actually I had installed cm 12.1 in my s2 but after updating to cm 13 through system updates,
Cyanogen recovery installed, which is pathetic!
Phone is not connecting to odin (WTF!)
Please help me!
Whenever I try to install latest update (i.e feb10) through system update I will download successfully but in recovery installation aborted :crying:
a) you must use TWRP recovery
b) if you are using CWM recovery, the last step before reboot is asking for fix root....then say NO
ko2005pu said:
a) you must use TWRP recovery
b) if you are using CWM recovery, the last step before reboot is asking for fix root....then say NO
Click to expand...
Click to collapse
Hi,
Thanks for your reply.The problem is that, I can't install twrp or cwm recovery over cyanogen recovery because phone is not
connecting with odin.
As I said root is not working, so I can't use rom manager or other apps to install recovery.
I do have the same problem.
Recovery is useless, choosing either "apply update/choose from sdcard0" or "apply update choose from sdcard1" shows "Install failed installation aborted", so I can't switch to TWRP or anything else.
I've tried to flash through odin (win) and heimdall (linux), it never worked.
Phone is still booting to CM13, but I can't install Goggle apps. I've tried to install the play store apk manually, it won't launch.
check your terminal emulator
type "su" without quotation mark
chironfr said:
I do have the same problem.
Recovery is useless, choosing either "apply update/choose from sdcard0" or "apply update choose from sdcard1" shows "Install failed installation aborted", so I can't switch to TWRP or anything else.
I've tried to flash through odin (win) and heimdall (linux), it never worked.
Phone is still booting to CM13, but I can't install Goggle apps. I've tried to install the play store apk manually, it won't launch.
Click to expand...
Click to collapse
Exactly the same thing happening with me exept odin. Tried to download playstore but it closes immediately. No root access. :crying:
Crazyevilbeef said:
check your terminal emulator
type "su" without quotation mark
Click to expand...
Click to collapse
Tried but its telling me "connection to ui timed out"
download this file and put to your SD
Kernel - https://www.androidfilehost.com/?fid=24407100847293134
GApps from http://opengapps.org/ downlaod these ARM-6.0-Pico
Flash the kernel first. Then flash the recovery you installed.
then wipe cache and dalvik.
power off then
flash to recovery
1.when youre in the recovery , Factory data reset, wipe cache and dalvik (ALSO WIPE THE SYSTEM PARTITION)
2.Flash the ROM you downloaded, then the GApps you downloaded.
3.wipe cache/dalvik
Reboot
---------- Post added at 12:07 PM ---------- Previous post was at 11:47 AM ----------
Crazyevilbeef said:
download this file and put to your SD
Kernel - https://www.androidfilehost.com/?fid=24407100847293134
GApps from http://opengapps.org/ downlaod these ARM-6.0-Pico
Flash the kernel first. Then flash the recovery you installed.
then wipe cache and dalvik.
power off then
flash to recovery
1.when youre in the recovery , Factory data reset, wipe cache and dalvik (ALSO WIPE THE SYSTEM PARTITION)
2.Flash the ROM you downloaded, then the GApps you downloaded.
3.wipe cache/dalvik
Reboot
Click to expand...
Click to collapse
if still doesnt work, may I see the recovery you downloaded? (the download link)
Crazyevilbeef said:
download this file and put to your SD
Kernel - https://www.androidfilehost.com/?fid=24407100847293134
GApps from http://opengapps.org/ downlaod these ARM-6.0-Pico
Flash the kernel first. Then flash the recovery you installed.
then wipe cache and dalvik.
power off then
flash to recovery
1.when youre in the recovery , Factory data reset, wipe cache and dalvik (ALSO WIPE THE SYSTEM PARTITION)
2.Flash the ROM you downloaded, then the GApps you downloaded.
3.wipe cache/dalvik
Reboot
---------- Post added at 12:07 PM ---------- Previous post was at 11:47 AM ----------
if still doesnt work, may I see the recovery you downloaded? (the download link)
Click to expand...
Click to collapse
I have cyanogen recovery which automatically downloaded during update from cm 12.1 to cm 13 nightly & I couldn't do anything in that recovery.
When I try to update cm 13 to a newer version its download and after reboot, it goes into recovery & says "Installation aborted".
@Crazyevilbeef If you know how to install this kernel & recovery through cyanogen recovery please tell me.
Same problem with google play and recovery what is wrong with cm13 ??
fur1233 said:
@Crazyevilbeef If you know how to install this kernel & recovery through cyanogen recovery please tell me.
Click to expand...
Click to collapse
did you do what I told you?
---------- Post added at 10:01 AM ---------- Previous post was at 09:53 AM ----------
Axiii said:
Same problem with google play and recovery what is wrong with cm13 ??
Click to expand...
Click to collapse
download this file and put to your SD
Kernel - https://www.androidfilehost.com/?fid=24407100847293134
GApps from http://opengapps.org/ downlaod these ARM-6.0-Pico
if you already downloaded it to your SD, then you're ready to go
Go to Cyanogenmod Recovery
-Wipe Data/ Factory Reset
-Wipe Cache partition
-Go to Apply Update, Flash the Kernel first. and then flash the TWRP recovery you downloaded from your sources
-Wipe Cache Partition
-Power Off
When the phone is off, Open it and go to recovery. It should be TWRP Recovery you are flashing
-Factory Data Reset, Wipe Cache, Dalvik
-Also wipe system partition
-Reinstall your ROM, and flash the GApps you downloaded from the link I gave you.
-Wipe Cache/Dalvik
-Reboot
your phone should be working fine now
Apply update, does not let me flash the kernel or choose the kernel from a location from my sdcard. Do I have get external sd card for this procedure?
fur1233 said:
Apply update, does not let me flash the kernel or choose the kernel from a location from my sdcard. Do I have get external sd card for this procedure?
Click to expand...
Click to collapse
yea yea.. also try to put the files on your external SD card
and flash it
Crazyevilbeef said:
yea yea.. also try to put the files on your external SD card
and flash it
Click to expand...
Click to collapse
Ok thanks
fur1233 said:
Ok thanks
Click to expand...
Click to collapse
Did it work mate?
I'm experiencing the same problem and unfortunately your solution doesn't work for me. Cyanogenmod Recovery doesn't allow me to install anything. Regardless if I select the internal or external sdcard, I receive the message: "Install failed" "Installation aborted".
Uome2 said:
I'm experiencing the same problem and unfortunately your solution doesn't work for me. Cyanogenmod Recovery doesn't allow me to install anything. Regardless if I select the internal or external sdcard, I receive the message: "Install failed" "Installation aborted".
Click to expand...
Click to collapse
You are not alone...
yes the same here. Not in internal or external sdcard. I cant install anything. It is so dissapointing!
@GaffaDuck @Uome2 @zaf_4 If you would find any solution please post there!
Crazyevilbeef said:
Did it work mate?
Click to expand...
Click to collapse
My mobile has charging problem, & my universal battery charger sparked yesterday
I will tell soon as I get my charger
what error does the cm recovery give you?
---------- Post added at 10:05 AM ---------- Previous post was at 10:03 AM ----------
what status error does the recovery give u?