Related
I am owner of the Galaxy S2. I updated yesterday to SuperNexus Jelly Bean ROM, didn't liked it. I restored my device to CM9 which i was using for a month without any problems. Then it started, computer couldn't recognize the phone anymore. Its like that SuperNexus broke something i don't know. I reformatted my Win 7 Ultimate x64 and installed fresh new CM10 - but after all my computer and S2 don't like each other - USB device not recognized. Chaos. I asked my friend to come over just to test with his S2 (he's on stock ICS 4.0.3 or 4.0.4), and when i plug his phone into my computer, everything works flawlessly. I tried mounting in recovery, i tried with and without usb debugging, Odin doesn't find phone neither, tried updating drivers - no luck... Dialing *#7284" just gives me "connection problem or invalid MMI code". Need help on this please!
You can check THIS thread. The one HERE , and also THIS thread.
I've read them all, tried every advice, but phone still isn't reacting to anything. So my problem is that phone couldn't connect to a computer, well it connects but it states "USB device not recognized", it charges but that's all. Everything started with Custom ROM SuperNexus. I've done these steps so far:
1. Reformatted my computer OS, which is Windows 7 Ultimate x64
2. Downloaded CM10 over my phone, get into recovery --> factory reset, wipe cache, wipe dalvik, format system, install ROM, wipe cache, wipe factory
3. I tried on my computer, tried on my old computer with Win XP x86
4. My friend's Galaxy S2 is working like a charm with MY cable on MY computer, which makes me believe that there is some defectiveness in my phone
5. I tried cleaning MicroUSB port with tooth pick, ear-cleaning pick (or how do you call it), needle with some paper wrapped around it, tried blowing in it
6. I tried with different USB ports, front ones, USB 3.0 - still no luck
7. I tried flashing Wanamlite and Neat ROM-s, still the same problem
I'm using Airdroid now, but i really need to know what's the problem! I have already ordered a new parts on E-Bay and I'm having high hopes about that solution. Im not able to post link to E-bay item, but search it under Item Number: 150904945773. Any other advice is really highly appreciable. Thank you
Try downloading the Rom over WiFi, or Hardline instead. Have you tried a different USB Cable ? Also I'm not able to check that Ebay # right now.
TEAM MiK
MikROMs Since 3/13/11
eBay item is this: New Samsung i9100 Galaxy SII S2 Charger Charge Port Flex Cable Replacement parts
OP, I'm hoping it works for you. You seem to be going in the right direction with your troubleshooting.
Well, i've downloaded this ROM (CM10) via WiFi, now i can do it over Airdroid too. But is there a way to flash Stock Original Samsung ICS in recovery? Or is it only available in Kies and Odin? I came across "Mobile Odin", do you guys have some experience with it, is it safe to use? How big are chances anyway that USB will work with stock ROM? Someone told me "your USB port on phone is OK, if it's charging it's not broken", so I'm thinking that it is not a hardware issue after all? And BTW i used several cables, and three different computers. My girlfriend have SGS3, i tried it like 2 hours ago with her cable on her computer with no luck (and of course her phone have no problems to connect to that computer using that cable). Thank you
I would try a Stock Rooted Rom, and see if that works correctly. If not try connecting the Device, and reboot the PC with the Device plugged in.
How to install stock ROM if i cannot get Kies or Odin to recognize phone? Via Mobile Odin?
kuleee said:
How to install stock ROM if i cannot get Kies or Odin to recognize phone? Via Mobile Odin?
Click to expand...
Click to collapse
Try USB solutions from My Android Solutions or Mobile Odin like http://forum.xda-developers.com/showpost.php?p=28302093&postcount=4789 ( procedure is same but written for Korean SGS 1
Guys let me tell you that I'm grateful to you, cause this Mobile Odin worked and my Stock Rooted ROM worked in connecting with PC. But not on first try when i got into a newly flashed Stock Rooted Firmware, i've let it to do his stuff, update what he needed to update blahblah. Then i tried to connect my cable - it didn't work. I cursed, i cursed so bad. Then i considered to give it another shot, rebooted the phone - and voila! Everything works, i tried 2-3 times and its working. Obviously SuperNexus started my problems, they couldn't be repaired by any other ROM i tried (i tried CM9, CM10, Wanamlite, old Wanamlite with MTP enabler, Neat ROM)... Then with Mobile Odin everything just worked. Dunno what really was the problem. Thank you all
Glad you got it sorted
TEAM MiK
MikROMs Since 3/13/11
Hi can anyone Help me. I've got big issues with my S3 Runing the latest Samsung Firmware (JB 4.1.2; Germany DBT) which i flashed via Odin.
The Device is rooted and recognizes the OTG Cable no more, but the cable works. I tried it on my Fathers S3 with the same Firmware but without root. By the Way its the Samsung Original OTG-Cable. I Also tried other OTG-Cables on both devices. Same result.
My S3 is charging over USB and is recognized as mass storage (MTP mode) when connected to PC,so i don't think its a Hardware problem.
I rooted with CF-Root SGS3 6.4. But there must be something wrong, because CWM manager brought an error message and disabled the Backup/restore options. So i rooted again via Odin, but without a change, Problem with CWM-Manager and OTG still exist.
Then i rooted with CF Auto Root via Odin,but the stock recovery brought no change at all. CWM-Manager was Gone and OTG-cable is still not recognized.
Next step was to the Flash the Stock ROM 4.1.2 again via Odin. After that, root was completely gone, but the OTG wasn't still recognized.
So i decided to Downgrade to 4.0.4 Stock Rom again and Flashed it with Odin.But my S3 wouldn't even boot now.It hung at the Samsung Boot logo and did do nothing more. Then i booted to Recovery mode, did a Cache wipe and Rebooted. It still hung at the boot logo.
Then i tried to Flash JB 4.1.2 Stock Rom again (surely via Odin). There was partly succes. My S3 Booted again normally (no Root and still no OTG-Cable recognition). I rooted again with CF-AutoRoot so i can use my apps which need root access. But i still can't get the OTG connectivity to work.
Everything on this device is working fine on 4.1.2 except that OTG-connector issue.
I'm currently making a backup with Titanium Backup. After that i try a Factory Reset (Hard Reset) If that doesn't work i'm totally at the end with my nerves and go to a Hosiptal.
Why the hell does this not work?? I can't imagine what reason there should be.
Please can anyone help me:crying::crying:
I am currently on Omega v36 and the USB OTG works flawlessly...
Sent from my GT-I9300 using xda app-developers app
Thanks for the Information, but not really helpful. I want to use the Samsung Stock Rom 4.1.2 without branding and root. And OTG don't work no more. I tried my cable on different I9300 fom colleagues Today running 4.1.2 Stock Rom (all without Root) It works perfectly on their devices. In the evening today i try a Hard Reset and hopefully my 4.0.4 Rom shows up. Then i'll upgrade OTA and root again with Autoroot. We'll see what happens.
Edit: Update:
Now i did a Full Wipe/ Factory reset. Downgraded to 4.1.1 then to 4.0.4 and back again.Made some wipes between the Firmware installations with Odin and tried my cable again. Still no USB OTG connectivity with neither of my two cables. So at the End it seems really to be a Hardware problem, although Charging, and MTP mode are doing well.
At last i will send the device back to my vendor to get it repaired in Guarantee.
Sent from my GT-I9300 using xda app-developers app
AW: [Q] S3 No USB OTG Connectivity after update on Stock 4.1.2
My problem is solved now. It was a Hardware issue. The USB connector was broken, but now that it is repaired everything is working fine now again.
Thread can be closed.
Sent from my GT-I9300 using xda app-developers app
Hey guys,
A friend of mine was having some trouble with his S2 which was running Omega rom v16.2 (phone would say it was charging with no cabe in it etc), so i told him he should try updating to Omega v23 Final and see if that fixed the problems.
However, after installing Omega v23 Final, he was stuck at the bootscreen, i told him it the first boot could take a while but it was stuck at bootscreen for a couple of hours before he gave up.
He tried everything, he wiped everything in recovery (system, cache, dalvik etc) but the problem persist.
So i figured i would flash the stock android rom via odin since nothing was working,
But the problem is that windows does not recognise the phone, neither does odin. (he had this in the past on old rom, it would recognise for some time then it wouldnt and so on)
it tries to install but fails every time, i tried installing several different drivers ( kies, and different stand alone driver packs) but i could not get it to work.
So, does anyone happen to know what is wrong?
Help is appreciated!
edit: odin does not say anything, windows says the usb device could not be installed
Tried several usb cables and ports, without succes
I think Debug Options wasn't enabled.What does Odin say?
Edit:Your USB is bad! If it says it's charging w/o a cable,it means bad USB...Try to lift the tongue(The metal part inside the USB port)with a toothpick.
And you could also try another usb cable as well as another usb port.
Sent from the little guy
I have a samsung galaxy s3 with stock firmware. I've hade a few custom roms before but put it back to stock for some reasons. But now odin does't recognize my phone. Drivers are up to date, the usb cable is the same, other phones are detected (s2 and s5). i have tried other cables including from other s3's from the box. I tried to root it from sd but still no luck, so i can't put custom rom from sd. Is there any way to put a rom from sd without rooting? it can be stock, it doesn't matter(i'm stuck with stock recovery). Also I consider myself a noob, so any explanation would be appreciated. Thank you
No, there isn't. Try another pc or resolve the usb conflict on the pc.
boomboomer said:
No, there isn't. Try another pc or resolve the usb conflict on the pc.
Click to expand...
Click to collapse
The same thing on other PC's.
I can only suggest following the guide on how to flash with Odin very carefully, then try searching for similar posts that got resolved.
However, most I've read were due to drivers or leads -if your phone connects normally in MPT mode but not in download mode then it's unlikely to be the s3 is faulty.
boomboomer said:
I can only suggest following the guide on how to flash with Odin very carefully, then try searching for similar posts that got resolved.
However, most I've read were due to drivers or leads -if your phone connects normally in MPT mode but not in download mode then it's unlikely to be the s3 is faulty.
Click to expand...
Click to collapse
It charges only...doesn`t connect in any way. Seems like i have to visit a service?
Same here!
Having exactly the same issue here! When connected by usb cable to the computer, theres no USB connection on the status bar. Just the ray symbol on battery to demonstrate the USB is connected.
I need to change my ROM, but even Odin didn´t recognise my phone.
Some clue?
Thanks!
Ps: sorry for my poor English....
Same Problem
I have the same problema, after the installation of the custom Rom, in about 1 week, the PC no regcognize my Galaxy S3. I have test it in another computer with another usb cable. I need help, i need to put a stock rom without odin, i have clockwormod installed.
Hello guys i'll try to keep my explanation short.
Device Samsung S6 Edge (rooted)
Not detected by ANY PC anymore, HOWEVER it does charge.
I Tried 5 different cables (new, original, old) cables do work so does the main PC
as my other devices are detected.
I have deleted KIES, SMART SWITCH , DRIVERS and reinstalled in the same order.
So, i flashed the S6 back to stock using TWRP (S6 was running Custom Rom XtrestoLite).
Still nothing, so i deleted all my files from the phone and flashed it back to stock again.
Still nothing, so i wiped the complete OS off the S6.
Now i'm here.
Try to change the usb mode it may can help
somestuff said:
Try to change the usb mode it may can help
Click to expand...
Click to collapse
That's impossible as i've said my S6 has no rom and Computers do not detect the S6.
StuckOnAndroid said:
That's impossible as i've said my S6 has no rom and Computers do not detect the S6.
Click to expand...
Click to collapse
Tell me the status for now, S6 is running on stock or custom??
enable usb debugging and install usb driver again, also check in another pc/laptop whether they are detecting it or not.
Use Original cable and give a shot This might help you.
Also head over to Samsung's ofifcial Developer website and fetch the Samsung USB Driver pack which is about 15MB.
That generally solves the issue. Atleast for me!
I had the same problem think the usb board is damaged... you should replace it.
It was running a custom rom, but now the phone has no rom. I can only into download mode or TWRP and thats it.
So there are no options available on the phone itself.
I tried kies driver, smart switch driver, seperate driver from samsung website, i've also tried clockwork samsung driver. Nothing works for me.
Maybe it's the micro usb port that is damaged, but i highly doubt that.
StuckOnAndroid said:
It was running a custom rom, but now the phone has no rom. I can only into download mode or TWRP and thats it.
So there are no options available on the phone itself.
I tried kies driver, smart switch driver, seperate driver from samsung website, i've also tried clockwork samsung driver. Nothing works for me.
Maybe it's the micro usb port that is damaged, but i highly doubt that.
Click to expand...
Click to collapse
Highly improbably that the USB board is damaged. Try different cables and before that, try it on a different PC. Sometimes it does work. My friend's S6 wouldn't read in Download Mode on my PC but it did on his.
Also head over to Run on your PC and type devmgmt.msc and check if there are any drivers missing.
I think the problem is the drivers
Install new drivers or find other samsung ... and try again
i've installed many drivers including the one that is 15,3mb in size.
guys it's not the computer because it does detect my tablet and my s7.
which also means that it's not the cables and believe me i have tried many cables about 8 cables now .
it's not the drivers, i dont know what it could be.
i think i'll order a new micro usb port and try that out eventhough i know that the usb port can't be damaged.
Unless one of you has a better idea, you are welcome to share.
Update: Hi guys, i've replaced the port but the phone is still undetectable by any computer.
Does anyone know what's wrong with this device?
Seriously, is there NO ONE of you guys with any knowledge or what?
I was going to say your usb charge port is damaged enough that it will charge but not transmit data but i re-read your post and realized you can't have a charge port issue if you able were able to flash stock rom. If you have teamviewer, pm me and i'll try to help you.
I have had this issue before in the past. Turned out that the cable was at fault. Swapped it and everything worked as expected, computer found it once again.
If it's not the cables as you claim, then you may have to ship it to samsung and request a replacement device.