hello, I'm from Georgia, not state, country. I bought LG lucid 2 and in my country there are only GSM operators. I rooted My device and than edit build.prop file somehow, and suddenly dissapear that Open testing mode opened and I could set preffered network type: but I couldn't set on GSM only mode, it swithes itself on GSM/CDMA auto (PRL) mode, or LTE mode, or anything where is CDMA or LTE listed. please help me someone, I am new on android platform and even don't know what is radio which is on (turn off radio).
some pics on of my device
here are some pics of my device's "testing mode to of lte" application
Is anyone here??
LG VS 870
*#*#4636#*#*
don,t working on lg vs 870????
have you try edit the build.prop?
see XT875 Droid Bionic method
unlocked
berobeqa said:
hello, I'm from Georgia, not state, country. I bought LG lucid 2 and in my country there are only GSM operators. I rooted My device and than edit build.prop file somehow, and suddenly dissapear that Open testing mode opened and I could set preffered network type: but I couldn't set on GSM only mode, it swithes itself on GSM/CDMA auto (PRL) mode, or LTE mode, or anything where is CDMA or LTE listed. please help me someone, I am new on android platform and even don't know what is radio which is on (turn off radio).
Click to expand...
Click to collapse
Were you able to get this phone to use in your country with local sim?
If so, what did you do? I am looking at getting the phone.....Please answer if you did.
Thank you
turned to unlock gsm?
---------- Post added at 02:59 PM ---------- Previous post was at 02:42 PM ----------
here managed to unlock some phones
http://forum.xda-developers.com/showthread.php?t=2394689&page=20
berobeqa said:
hello, I'm from Georgia, not state, country. I bought LG lucid 2 and in my country there are only GSM operators. I rooted My device and than edit build.prop file somehow, and suddenly dissapear that Open testing mode opened and I could set preffered network type: but I couldn't set on GSM only mode, it swithes itself on GSM/CDMA auto (PRL) mode, or LTE mode, or anything where is CDMA or LTE listed. please help me someone, I am new on android platform and even don't know what is radio which is on (turn off radio).
Click to expand...
Click to collapse
Can you post here your build prop?
amigo necesito que ayudes para poder cambiar mi lucid 2 vs 870 de cdma a gsm
berobeqa said:
here are some pics of my device's "testing mode to of lte" application
Click to expand...
Click to collapse
amigo necesito que ayudes para poder cambiar mi lucid 2 vs 870 de cdma a gsm si puedes explicarme como hacerlo o grabar un video y mandarmelo aqui esta mi correo [email protected]
Related
Hi is there a way to get the msl code of a not activated phone?
i just tried sprint chat but they told me that the phone should be active in order for them to provide me the number.
any ideas?
Hello that such I also try talking to sprint chat several times without success, I tried with bed qspt cdma-workshop 2.7, radiocomm and none give me the code so I decided to buy the full version cdma workshop bed and try and not give me the code a solution?
Sent from my MB855 using xda premium
hjcg2001 said:
Hi is there a way to get the msl code of a not activated phone?
i just tried sprint chat but they told me that the phone should be active in order for them to provide me the number.
any ideas?
Click to expand...
Click to collapse
This guy says he was a program to figure the MSL
Got mine for $15.
syrup_productions at yahoo.com
Interested in this...
There is a way to change SPC/MSL, you can check this webside: bbs.gfan.com/android-3047572-1-1.html
i finally have my motorola photon working on the Iusacell cdma network in Mexico, i found a email in this same forum salesmsl3 at gmail.com i sent him my meid dec, and after 6 hours he send me the msl and it worked!!
Just for 5 bucks, i dont know where does he get them.
After that i used cdma workshop to write the nvitem that keeps data settings
later the qpst and i got it working at 100%
hjcg2001 said:
i finally have my motorola photon working on the Iusacell cdma network in Mexico, i found a email in this same forum salesmsl3 at gmail.com i sent him my meid dec, and after 6 hours he send me the msl and it worked!!
Just for 5 bucks, i dont know where does he get them.
After that i used cdma workshop to write the nvitem that keeps data settings
later the qpst and i got it working at 100%
Click to expand...
Click to collapse
Como lo conseguiste amigo? Y de donde hay que depositar para obtener.el código spc
Sent from my MB855 using xda premium
yo no lo vendo simplemente cuento mi experiencia, la dirección de correo del contacto que me vendió el código esta justo arriba de tu post. Si tienes duda de configuración pregunta. Saludos!
i dont sell it the spc, i was just telling my experience. If you have any doubt about configuration feel free to ask.
guys,
I want to do same for my photon 4g which is not activated on sprint but working fine on gsm.
i want to activate cdma part of it.
can you guide me?
I am from India and would like to use indian cdma service provider.
thanks in advance.
yes no problem get the msl and i can guide you with the configuration.
hi,
I finally got the msl .
how do i proceed?
thanks again.
Tienes alguna guia de como le hiciste para configurarlo con el cdma workshop, y que version usaste?
Gracias.
Do you have a manual configuration for this?
Which version cdma workshop is?
hjcg2001 said:
yo no lo vendo simplemente cuento mi experiencia, la dirección de correo del contacto que me vendió el código esta justo arriba de tu post. Si tienes duda de configuración pregunta. Saludos!
i dont sell it the spc, i was just telling my experience. If you have any doubt about configuration feel free to ask.
Click to expand...
Click to collapse
1- you gotta get your phone on DIAG Mode you can find that info in this forum.
2- Once you are in Diag Mode you can conect to cdma workshop and rewrite the nv item 8035 (click here) "you need to do this so the data settings can be saved when your are configuring the phone in qpst.
3- Then you can program your phone on qps(you need to find the settings for your cdma carrier)
you can follow a standar guide for a motorola x or x2,
i followed this guide but is in spanish click here
Thanks hjcg2001.
I did´nt use cdma work shop.
At just 2 step, I have a iusacell number.
1) Get the spc number from RadioComm
http://forum.xda-developers.com/showthread.php?t=1365058
2) On the phone dial pad, press ## followed by the 6-digit code you get in the spc number, followed by an additional #. Example: ##123456#
Change the MIN and MDN number for your new provider.
Automatic the phone restart.
I did get those number, when I ´m calling to iusacell for new number.
Thanks.
hjcg2001 said:
1- you gotta get your phone on DIAG Mode you can find that info in this forum.
2- Once you are in Diag Mode you can conect to cdma workshop and rewrite the nv item 8035 (click here) "you need to do this so the data settings can be saved when your are configuring the phone in qpst.
3- Then you can program your phone on qps(you need to find the settings for your cdma carrier)
you can follow a standar guide for a motorola x or x2,
i followed this guide but is in spanish click here
Click to expand...
Click to collapse
Yes but that is only for voice, i had to make the long process to get the 3g working.
Sent from my MB855 using XDA App
Hello Everyone,
I downgraded the bootloader to Qualcomm and successfully installed the rainbow mod, which claims to be carrier unlocked, but my SIM still doesn't work in the stupid phone.
In config->about it shows that the carrier is CV GB SW ID313 v02 and I read on some post here that this is UK unlocked or something.
If I install some rom will this work? Is it possible to hack something using my beloved Linux?
Why doesn't it work with the brazilian SIM? It doesn't ask me anymore for the carrier unlock code, but it first asked for the PIN then for the PUK, of the SIM. I am sure these are correct, since I confirmed with my carrier.
The original carrier is TELCEL, from Mexico, and I already checked in the websites that give the code to unlock, but they don't have this carrier in their list.
Should I throw the phone throught the window?
Thanks a LOT!
scudelari said:
Hello Everyone,
I downgraded the bootloader to Qualcomm and successfully installed the rainbow mod, which claims to be carrier unlocked, but my SIM still doesn't work in the stupid phone.
In config->about it shows that the carrier is CV GB SW ID313 v02 and I read on some post here that this is UK unlocked or something.
If I install some rom will this work? Is it possible to hack something using my beloved Linux?
Why doesn't it work with the brazilian SIM? It doesn't ask me anymore for the carrier unlock code, but it first asked for the PIN then for the PUK, of the SIM. I am sure these are correct, since I confirmed with my carrier.
The original carrier is TELCEL, from Mexico, and I already checked in the websites that give the code to unlock, but they don't have this carrier in their list.
Should I throw the phone throught the window?
Thanks a LOT!
Click to expand...
Click to collapse
Yo instalé el Limunatrix y me va muy bien con el Lumia 710, y es de Telcel.
lrhage said:
Yo instalé el Limunatrix y me va muy bien con el Lumia 710, y es de Telcel.
Click to expand...
Click to collapse
Thanks!
I'll try that.
Bello i have the d610ar versión, i live in argentina and i need know if is possible activate 4g in muy phone. When i put *#*#4636#*#* in the dialer appear the option to select the network type and appear the option lte\wcdma ( the original is in wcdma) bit when i restart the phone it back to wcdma. Anyone knows if is possible? Por changing the baseband versión por any idea? I know the d625 versión have4g it has a dofferebt hardware? Por baseband?
Thanks for your help and sorry for my english !!!!
Hi guys, I have a problem. I Can't get to Service Mode on my phone. I want to do that because I have to force 3g. I have read on this forum what should I do to get in on service mode.
I have a gt-i9060i /DS (grand neo plus) android 4.4.4. I'm not root now.
I've tried with *#0011 + back + key input "Q" + key input "0" and waited but nothing happened. The second screen has never appeared! (I tried that been root and then without been root and in both cases it didn't Work!)
The real problem is that I got a european phone (bought in spain) but I live in Argentina, and the 3g frecuencies are different. Here in south america we use 850/ 1900 and in europe the ones that Work are 900/ 2100.
I need your help! I'm not a programer so I really don't now how to fix it. I hope yo can help me!!
maturocker said:
Hi guys, I have a problem. I Can't get to Service Mode on my phone. I want to do that because I have to force 3g. I have read on this forum what should I do to get in on service mode.
I have a gt-i9060i /DS (grand neo plus) android 4.4.4. I'm not root now.
I've tried with *#0011 + back + key input "Q" + key input "0" and waited but nothing happened. The second screen has never appeared! (I tried that been root and then without been root and in both cases it didn't Work!)
The real problem is that I got a european phone (bought in spain) but I live in Argentina, and the 3g frecuencies are different. Here in south america we use 850/ 1900 and in europe the ones that Work are 900/ 2100.
I need your help! I'm not a programer so I really don't now how to fix it. I hope yo can help me!!
Click to expand...
Click to collapse
Ola amigo
quisiera saber como te fue con la banda, si pudo habilitar ya que igual tengo un I9060I/ds con firmaware de españa, pero no da el 3g, por favor si alguin tiene alguna solucion a este problema, o si hay algun modem con banda 1900 para 3g
Gracias
Yamir
hey, did something stupid. and completely own fault tbh.
Got a sprint M9 that I've been trying to get convert to a developer/unlocked M9.
Long story short I relocked my bootloader and couldn't unlock it, so I decided to try this, being late didn't read the "DOESN'T WORK ON M9" bit.
Now it won't boot. no charge led. nothing. Plugging into my linux and using dmesg, and I get a lot of errors and eventually it finds a qualcom usb modem.
lsusb gives:
Code:
Bus 007 Device 078: ID 05c6:9008 Qualcomm, Inc. Gobi Wireless Modem (QDL mode)
anyway I can undo "echo -ne "HTCU" | dd of=/dev/block/mmcblk0p3 bs=1 seek=33796"?
or am I royally ****ed?
oh my... you are in QHSUSB mode. you remind me old day of evo 3d, where we needed to go into this mode by bricking device. so that we can downgrade hboot..
http://forum.xda-developers.com/showthread.php?t=1522351
follow it for reference.. you just have to do it by trail and hit method.. and beware as its for other device. try to flash the exact version of bootloader version.. so that atleast it can be booted. search google for QHSUSB mode, htc unbricking project.
my words are only an advice.. i am not responsible for anything..
also see this :-
http://forum.xda-developers.com/showthread.php?t=2582142
http://forum.xda-developers.com/showthread.php?t=2086142
only for reference.
best of luck..
stevestone said:
oh my... you are in QHSUSB mode. you remind me old day of evo 3d, where we needed to go into this mode by bricking device. so that we can downgrade hboot..
http://forum.xda-developers.com/showthread.php?t=1522351
follow it for reference.. you just have to do it by trail and hit method.. and beware as its for other device. try to flash the exact version of bootloader version.. so that atleast it can be booted. search google for QHSUSB mode, htc unbricking project.
my words are only an advice.. i am not responsible for anything..
also see this :-
http://forum.xda-developers.com/showthread.php?t=2582142
http://forum.xda-developers.com/showthread.php?t=2086142
only for reference.
best of luck..
Click to expand...
Click to collapse
thanks for the links, I gave it ago but unfortunately it didn't work :// I think it might be because I corrupted sbl1 and its cutting off before what ever magik is done to enable the partions.
I've kinda resolved it by calling HTC. It's still under "warranty" so they will fix it for free. They won't be able to switch it on either, so they'll never know what I did
I suppose the moral of the story is don't mess with the emmc...
I can not understand why most want to convert M9 Sprint to Developer Version, if only you get s-off and SuperCID and you can flash any ROM to remove completely all Sprint Bloatware...
Lussardi said:
I can not understand why most want to convert M9 Sprint to Developer Version, if only you get s-off and SuperCID and you can flash any ROM to remove completely all Sprint Bloatware...
Click to expand...
Click to collapse
The main reason for me was that I needed GSM, WCDMA and the LTE bands that work for my carrier, of those Sprint only had access to WCDMA.
argon12 said:
The main reason for me was that I needed GSM, WCDMA and the LTE bands that work for my carrier, of those Sprint only had access to WCDMA.
Click to expand...
Click to collapse
LTE bands works fine in M9 sprint, You only need gain S-OFF and change your SKU-ID & Region in your device
Lussardi said:
LTE bands works fine in M9 sprint, You only need gain S-OFF and change your SKU-ID & Region in your device
Click to expand...
Click to collapse
Que tal? Te escribo en español porque vi que sos de El Salvador jajaja, me podrias ayudar a ver si puedo agarrar al menos 3G con mi M9 Sprint, ya tengo S-Off, root, Twrp y todo eso, el problema es que solo me levanta 2G, lo quiero utilizar en Claro Guatemala vos me podrias decir cuales son los codigos para nuestra region? Gracias de Antemano, que buena onda ver gente centroamericana por aca