Galaxy Player 5.0 Intl bricked- Help? - Samsung Galaxy Player 4.0, 5.0

Hello everybody,
I know this question has been asked multiple times, but after Googling for hours and searching in almost every thread about this subject here, I haven't found the solution yet.
What you need to know first
What happened is:
I tried flashing cm11, it went wrong, so I tried it again. Went wrong again. I decided to reboot the device and try it one more time. I couldn't even try that, cause I wasn't be able to go to recovery anymore. Booting into Download mode was possible though. So I decided to flash back to stock trough Odin, but Odin failed (posssibly a corrupted file), leaving me with the:
Phone--- exclamation mark ---PC sign, I wished I never needed to see.
What I tried and what still works is:
*Connecting to PC works (I can't see the files on the player, though). Odin does still recognise the device.
* Because Odin still recognised the device I tried flashing stock back. Odin failed in doing that, so then I tried using the pit file provided. This time Odin hanged at: DO NOT TURN OFF TARGET (please note: Odin on pc said this, player stil showed the phone-exclamation mark-pc sign). After Googling around I found I could just pull the USB cable out and try again, but unfortunately this didn't work.
HELP!!
So my question is: Is it possible for me to recover my international GP 5.0, and if so HOW?
Once again, Sorry for asking this question and thanks in advance.
-BrickedPlayer
P.s. Sorry for my bad English, it isn't my first language
P.P.S I wondered if Unbrickable Mod or OneClick Unbrick work, I'll try them asap (that means: when I have access to a Ubuntu PC, what I haven't now.

Related

NO Kies recognition after rooting with Odin

Dear mighty community,
I recently successfully flashed with ODIN (the unsecure Kernel XWKDD) my S2. Everything passed and my phone rebooted.
Upon starting SuperonClick apparently just at the end of rooting the program starts to freeze. "Step 6" couldn't be finalized.
So, of course I had to force close Superoneclick.
Tried to connect with Kies. Nothing. Updated Kies and the "try to look for connection" solution didn't help either. Restarted phone and computer. Still nothing.
Installed Kies on another computer, latest version. My phone still won't be recognized. " solution looking" didn't work.
Tried my luck with superoneclick eventhough no Kies. Program freezes at Connecting to phone now, doesn't even get to "step 6".
Little bummed out of how to finalize root or even reset phone with original software without KIES recognition.
Please, mighty community, help me
kies has been having a few problems from what i have heard..as many have the same questions as you try searching first before you open a thread..anyway a thread similar to yours that dont recognize handsets or firmware is here
http://forum.xda-developers.com/showthread.php?t=1285544
dont know if it helps but shows that your not the only one whos having problems with kies..
By the way what was your original firmware?? Cause before it happened to me when i tried rooting and never had it recognised by kies...so i tried to find the kernel that matched the closest to mine and it was recognised and updated the firmware....
But il be honest i dont use Kies anymore and its not useful for me at all...but whats your original firmware and i will help you try to match the one you should flash through odin again
I played a little bit with turning usb debugging on and off several times. I turned USB dubugging off and KIES recognized my phone. Started Superoneclick couldn't get passed the "awaiting connection to phone". Forceclosed superonclick. Closed KIES, turned debugging on, started superoneclick and it got up unitl the point on the picture. Then freeze!
With great foresight I didn't wrote down the kernel version
I only have general information which, I guess, won't help anything:
The buildnumber is:
GINGERBREAD.XWK4
And the kernel version I installied is: [email protected] #2
Right i dont know if this will work but give it a try..i will give you two links..one is for rom and one is for your kernel...
http://www.multiupload.com/LH122I67IU
thats for your kernel stock
http://hotfile.com/dl/116887059/f45e1a7/9100XWKDD_I9100XXKDH_I9100XEUKD1.zip.html
thats for stock rom.
that will unroot you and get you back to stock again...once you done that and you flashed back to stock then try and see what kies says to you...and if your going to root please for the love of god dont connect to kies cause it will not recognise your firmware..but i think you can backup data and transfer your music and stuff
give me a message if you want more help
and follow the guide in the link below
http://forum.xda-developers.com/showthread.php?t=1075278
KDD just about the first firmware for the may release of the SGS2 .
jje
Three main problem I encounter is an interrupted rooting process. I am able to flash successfully the rom with odin but unable to complete root with superoneclick. It always stops at step 6 no matter what I try. Other machines, rebooting, start with admin rights. simply nothing.
Usb debugging off made kies recognize the phone but still unable to complete root.
I know, I started a thread with different problem and am now facing a new and different one. But I really owe you a lot for the time you put into helping me to figure out my priblem
Sent from my GT-I9100 using XDA App
A working cwm and root method.
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
Once you install non original firmware Kies may or may not upgrade thats a chance you take .
jje

[Q] please help :-( weird symbol possibly bricked...

OK first, my rooted u.s. 4.0 running cm7 suddenly had a read on file system. Couldn't download anything, delete anything, or modify anything on /mnt/sdcard. So I thought I would go into Odin and restore from an old backup. In the middle of the process, Odin crashes and my device gives me a weird screen that I can't get rid of unless I remove the battery. I can't even go into cwm. The screen shows a phone and a computer with a yellow caution symbol between the them. I think it means there is an error with connection to the PC or something. I've tried to fix it with Odin but it won't recognize the device. What do I do???
Mine did this aswell. I found that although I could not get it into download mode to try and flash again, the symbol you spoke of lets it occur anyway. The issue with it not being recognised may be due driver problems so try uninstalling them compleyely then reinstalling.
Then basically, just try to reflash through odin whilst that symbol is there.
Hope I helped
Sent from my YP-G70
I've tried but it just says SetupConnection..... and stays there.
Sent from my A500 using XDA
the symbol described is a sort of default download mode that comes up when the OS i corrupted.
As others said... you are not totally out of luck yet.
Make sure you have the right drivers on you PC.
Start Odin and connect your player via USB.
Your device should now be recognized by PC if you have the correct drivers (since you were already trying to flash in the first place, you might be ok here).
Flash one of the stock roms you may find in the dev section for your player (make sure it's the right one, US or INT) and hit start. If you are not sure how to use Odin, there are some good guides you can search for also.
Your player should reboot once it's completed and you can start the rooting and flashing process again.
Good luck.
Yay fixed it. After many attempts with odin (it kept failing) it finally booted up. Thanks for the help guys
Sent from my YP-G1 using xda premium
This question has already been posted multiple times

[Q] Need help fixing soft bricked phone

:highfive: Hi !
I run Windows 7, Samsung Galaxy S7390G (rooted) originally under stock rom (because there's no custom rom for my phone :crying:,) and without any custom recovery (because there's no custom recovery for my phone)
I had problem with my internal SD card, I posted on forums, but not this one, and had no help, so I decided to restock my phone.
I used Odin, because I failed with Heimdall, and Odin began flashing my Rom, but gave me a red "fail" message error.
I tried the SamMobile's stock rom for my device, S7390. I tried several ones, always S7390, and Odin failed each time, and stuck me in half-bricked state.
Note: My old computer is with Linux Mint, but I can't use it for now, but I can make a live USB with a Linux distro under the Window computer that I use now if it helps.
I have sometimes some trouble with the USB drivers, and I have been forced to reinstall them many times, trying different packages. For now, but I don't know if it will last, Odin is able to recognize my phone, but each time I try to flash a Rom, it fails. I tried another USB cable, and other USB ports, same thing...
I don't know what to do? I read that there was solution with the adb command, I'll read about it, because I have poor knowledge, but I despair
Even if I know it can be repair, but I can't do it! :crying:
I can only access to download mode.
Please, help a poor despaired French girl. Thank you very much.
Nobody?
None to help? :crying:
Same Problem
No worrys darling you can just go to recovery mode of your phone and select wipe factory data reset and then your phone will reboot and it will be as new as you bought it that time only.
Hope it helps
Sent from my GT-I9300 using XDA Free mobile app

[Q] SM-N900P Odin Issue

I'm trying to get back to my stock firmware after installing Slimkat. To make a long story short, Odin is not turning yellow. I guess it is not recognizing my device; however, my computer recognized it a few days ago. I've tried Odin 3.07, 1.85. I am running 4.4.2 N900PVPUCNC5, but all the links to that firmware lead me to spam ridden pages.
I can get into download mode and recovery mode, but when I try to factory reset, it tells me it is SEANDROID Enforcing....then goes no further.
A) Can anyone lead me to the correct firmware for my device
B) Am I running the wrong version of Odin (which has happened before)?
C) I have the correct USB drivers installed and all Odin tells me is that it is finished, but I don't get a 'pass' message. HELP!
Sorry in advance if I am posting this in the wrong place or if my post is unclear. I am new and learning the ropes. I've read many posts and can't seem to find the answer to my issue. Any suggestions?

Am I doomed

Greetings all,
I am a real noob and have recently taken to playing with my android devices.
Unfortunately I am in a predicament with my old S3 I9300.
I really screwed up and failed to make a Nandroid back up when using TWRP to flash Cynagenmod 13, after following the correct procedure on my other I9300 and successfully flashing it I became cocky and made the fatal error of not having a back up. A bit of back story but perhaps unrelated it was also suffering the old "Failed to Mount EFS" message which I have recently learnt to fix on my Old Old I9100 S2 using ADB.
After flasing It was in a Cynagenmod boot loop and was not able to be recognized by my pc via download mode or recovery, so was unable to use Odin, Kies or even ADB.
After experiencing USB issues with Cynagenmod 13 on my other I9300 when the flash was successful, I decided that perhaps it would be better to flash Android Revolution as the USB connections just seem to work better. After the flash seemed to be successful and the Samsung Logo just hung around and never booted.
I played with it all day, trying to get Kies, ADB and Odin to recognize it to no avail, (I tried every little trick on Google, reinstall drivers, restart pc , restart device, plug unplug, play with the buttons and the battery etc.....) the thing is, is that Odin would recognize it in bootloop.
After growing tired of this not working, for some stupid reason I decided to flash CWM over TWRP via MicroSD, i just thought maybe I could get ADB to work or something. Anyway the flash worked and I continued to try ADB, KIES and ODIN but nothing.
To make matters worse currently when I try to go to Recovery CWM is now looping (I'm hoping its a passing phase), so with recovery gone my phone is restricted to Download mode. I really think my last chance is to get download mode communicating with Kies to get the Firmware.
Feeling frustrated and about throw my phone on the recycling heap after googling and reading so many XDA threads I decided to reach out and ask for any help or suggestions in finding a way to get my phone recognized in Download Mode.
I thank you for your time in reading this post and look forward to hearing any advice.
Cheers.
muddled said:
Greetings all,
I am a real noob and have recently taken to playing with my android devices.
Unfortunately I am in a predicament with my old S3 I9300.
I really screwed up and failed to make a Nandroid back up when using TWRP to flash Cynagenmod 13, after following the correct procedure on my other I9300 and successfully flashing it I became cocky and made the fatal error of not having a back up. A bit of back story but perhaps unrelated it was also suffering the old "Failed to Mount EFS" message which I have recently learnt to fix on my Old Old I9100 S2 using ADB.
After flasing It was in a Cynagenmod boot loop and was not able to be recognized by my pc via download mode or recovery, so was unable to use Odin, Kies or even ADB.
After experiencing USB issues with Cynagenmod 13 on my other I9300 when the flash was successful, I decided that perhaps it would be better to flash Android Revolution as the USB connections just seem to work better. After the flash seemed to be successful and the Samsung Logo just hung around and never booted.
I played with it all day, trying to get Kies, ADB and Odin to recognize it to no avail, (I tried every little trick on Google, reinstall drivers, restart pc , restart device, plug unplug, play with the buttons and the battery etc.....) the thing is, is that Odin would recognize it in bootloop.
After growing tired of this not working, for some stupid reason I decided to flash CWM over TWRP via MicroSD, i just thought maybe I could get ADB to work or something. Anyway the flash worked and I continued to try ADB, KIES and ODIN but nothing.
To make matters worse currently when I try to go to Recovery CWM is now looping (I'm hoping its a passing phase), so with recovery gone my phone is restricted to Download mode. I really think my last chance is to get download mode communicating with Kies to get the Firmware.
Feeling frustrated and about throw my phone on the recycling heap after googling and reading so many XDA threads I decided to reach out and ask for any help or suggestions in finding a way to get my phone recognized in Download Mode.
I thank you for your time in reading this post and look forward to hearing any advice.
Cheers.
Click to expand...
Click to collapse
Hey Mate,
Firstly we all are noobs here helping each other, secondly from my experience of S3, it is such a device that under any condition, if your hardware is intact, you can recover your phone from almost anything, so yeah you might have a solution to your problem.
Coming to the problem at hand, i had the same thing happen to my S3, (only twrp logo showed, couldn't access recovery, no ROM, only download mode available) the way i fixed it was using odin, now i know you say that odin is not recognizing your device, the thing is firstly Kies is useless in this situation acc. to me, it only works stock ROM and that too with difficulty, what i would say is go here - http://developer.samsung.com/technical-doc/view.do?v=T000000117
and then install the drivers to your PC, next up download the official firmware from sammobile or any other site (careful of the version you are using), now put the phone in download mod, start odin and then connect your phone. Now, hopefully odin will recognize your phone and you can flash the official firmware, also i would recommend to stay on the official firmware for like a week before returning to flashing again as i have noticed that constant flashing and wiping leads to not only errors like "unable to mount EFS" but also serious errors like "Unable to mount /system" or "Unable to mount /Data" ,which clearly sucks
Please try the method and tell me if it worked , if not we'l try something else but we sure as hell will get your device working again
If still not recognized then here is a suggestion :
Exit/uninstall from nokia/ovi suit.
Exit/uninstall bluestack. (if u r using it)
Update your drivers(phone specific)
Use correct odin version acc to ur phone
Sent from my Micromax E352 using XDA-Developers mobile app
I'm just gonna throw my 2 cents in too. I didn't read your whole thread as I'm in a slight rush right now.
But basically -
Can your PC recognise your phone when it's plugged into USB in Download Mode? If so, use ODIN to flash any stock firmware and you're back to square one (working, but stock) phone. Then go from there. Obviously try to flash the right firmware or you'll end up no further forward.
If it can't recognise it, try reinstalling the drivers, uninstalling the programs mentioned above and using another USB cable. My experience with my own S3 has shown potential wear with the USB port on the bottom of the phone presumably due to it's age and as a result it doesn't recognise many USB cables.
Regards

Categories

Resources