Greetings all,
I am a real noob and have recently taken to playing with my android devices.
Unfortunately I am in a predicament with my old S3 I9300.
I really screwed up and failed to make a Nandroid back up when using TWRP to flash Cynagenmod 13, after following the correct procedure on my other I9300 and successfully flashing it I became cocky and made the fatal error of not having a back up. A bit of back story but perhaps unrelated it was also suffering the old "Failed to Mount EFS" message which I have recently learnt to fix on my Old Old I9100 S2 using ADB.
After flasing It was in a Cynagenmod boot loop and was not able to be recognized by my pc via download mode or recovery, so was unable to use Odin, Kies or even ADB.
After experiencing USB issues with Cynagenmod 13 on my other I9300 when the flash was successful, I decided that perhaps it would be better to flash Android Revolution as the USB connections just seem to work better. After the flash seemed to be successful and the Samsung Logo just hung around and never booted.
I played with it all day, trying to get Kies, ADB and Odin to recognize it to no avail, (I tried every little trick on Google, reinstall drivers, restart pc , restart device, plug unplug, play with the buttons and the battery etc.....) the thing is, is that Odin would recognize it in bootloop.
After growing tired of this not working, for some stupid reason I decided to flash CWM over TWRP via MicroSD, i just thought maybe I could get ADB to work or something. Anyway the flash worked and I continued to try ADB, KIES and ODIN but nothing.
To make matters worse currently when I try to go to Recovery CWM is now looping (I'm hoping its a passing phase), so with recovery gone my phone is restricted to Download mode. I really think my last chance is to get download mode communicating with Kies to get the Firmware.
Feeling frustrated and about throw my phone on the recycling heap after googling and reading so many XDA threads I decided to reach out and ask for any help or suggestions in finding a way to get my phone recognized in Download Mode.
I thank you for your time in reading this post and look forward to hearing any advice.
Cheers.
muddled said:
Greetings all,
I am a real noob and have recently taken to playing with my android devices.
Unfortunately I am in a predicament with my old S3 I9300.
I really screwed up and failed to make a Nandroid back up when using TWRP to flash Cynagenmod 13, after following the correct procedure on my other I9300 and successfully flashing it I became cocky and made the fatal error of not having a back up. A bit of back story but perhaps unrelated it was also suffering the old "Failed to Mount EFS" message which I have recently learnt to fix on my Old Old I9100 S2 using ADB.
After flasing It was in a Cynagenmod boot loop and was not able to be recognized by my pc via download mode or recovery, so was unable to use Odin, Kies or even ADB.
After experiencing USB issues with Cynagenmod 13 on my other I9300 when the flash was successful, I decided that perhaps it would be better to flash Android Revolution as the USB connections just seem to work better. After the flash seemed to be successful and the Samsung Logo just hung around and never booted.
I played with it all day, trying to get Kies, ADB and Odin to recognize it to no avail, (I tried every little trick on Google, reinstall drivers, restart pc , restart device, plug unplug, play with the buttons and the battery etc.....) the thing is, is that Odin would recognize it in bootloop.
After growing tired of this not working, for some stupid reason I decided to flash CWM over TWRP via MicroSD, i just thought maybe I could get ADB to work or something. Anyway the flash worked and I continued to try ADB, KIES and ODIN but nothing.
To make matters worse currently when I try to go to Recovery CWM is now looping (I'm hoping its a passing phase), so with recovery gone my phone is restricted to Download mode. I really think my last chance is to get download mode communicating with Kies to get the Firmware.
Feeling frustrated and about throw my phone on the recycling heap after googling and reading so many XDA threads I decided to reach out and ask for any help or suggestions in finding a way to get my phone recognized in Download Mode.
I thank you for your time in reading this post and look forward to hearing any advice.
Cheers.
Click to expand...
Click to collapse
Hey Mate,
Firstly we all are noobs here helping each other, secondly from my experience of S3, it is such a device that under any condition, if your hardware is intact, you can recover your phone from almost anything, so yeah you might have a solution to your problem.
Coming to the problem at hand, i had the same thing happen to my S3, (only twrp logo showed, couldn't access recovery, no ROM, only download mode available) the way i fixed it was using odin, now i know you say that odin is not recognizing your device, the thing is firstly Kies is useless in this situation acc. to me, it only works stock ROM and that too with difficulty, what i would say is go here - http://developer.samsung.com/technical-doc/view.do?v=T000000117
and then install the drivers to your PC, next up download the official firmware from sammobile or any other site (careful of the version you are using), now put the phone in download mod, start odin and then connect your phone. Now, hopefully odin will recognize your phone and you can flash the official firmware, also i would recommend to stay on the official firmware for like a week before returning to flashing again as i have noticed that constant flashing and wiping leads to not only errors like "unable to mount EFS" but also serious errors like "Unable to mount /system" or "Unable to mount /Data" ,which clearly sucks
Please try the method and tell me if it worked , if not we'l try something else but we sure as hell will get your device working again
If still not recognized then here is a suggestion :
Exit/uninstall from nokia/ovi suit.
Exit/uninstall bluestack. (if u r using it)
Update your drivers(phone specific)
Use correct odin version acc to ur phone
Sent from my Micromax E352 using XDA-Developers mobile app
I'm just gonna throw my 2 cents in too. I didn't read your whole thread as I'm in a slight rush right now.
But basically -
Can your PC recognise your phone when it's plugged into USB in Download Mode? If so, use ODIN to flash any stock firmware and you're back to square one (working, but stock) phone. Then go from there. Obviously try to flash the right firmware or you'll end up no further forward.
If it can't recognise it, try reinstalling the drivers, uninstalling the programs mentioned above and using another USB cable. My experience with my own S3 has shown potential wear with the USB port on the bottom of the phone presumably due to it's age and as a result it doesn't recognise many USB cables.
Regards
Related
[Q] Mobile Odin Boot Loop No recovery Access & Not recognized by computers... HELP!!!
Full Story (summary below):
OK, here's my story. My GT-P7510 (Galaxy Tab 10.1-Wifi) was running AOKP's ROM a while ago and something went terribly wrong. It would not boot and was unable to mount to the computer.The only way I could think of fixing it was a full erase (minus storage). It didn't help. After a long time of being idle and thoroughly searching its storage I stumbled upon a ROM that was hiding in its depths, and immediately flashed it. It was a Cyanogen Mod. After flashing however the tablet was still unable to mount to the PC. After changing PC's, driver's, OS's, the whole nine yards, etc. It still did not mount to the PC. So I gave up on it. I was able to do nearly everything without access to PC mounting. So I kept it like that for awhile. Until pure idiocy struck me and I took hold of the notion that if I used Mobile ODIN and flashed a stock firmware with it, My tablet would be restored to its former glory. Big Mistake. Immediately after flashing Stock with Mobile Odin, I entered a Boot-loop of Mobile Odin's devise. All it does is run some Mobile Odin text really fast, and then restart. Again, and again, and again. (I really hate Mobile Odin now) And Mobile Odin has seized control of trusty CWM Recovery (at least I assume it has, but it could have also just replaced CWM with itself); So that whenever I choose recovery It simply runs the same faulty Mobile Odin text and restarts. And going to Download mode is pointless as the computer always says that "It cannot connect because the device has malfunctioned." (In Windows 8) . . . That's my story... Help?
:fingers-crossed: :crying: :fingers-crossed:
Very simplified summary:
In Mobile ODIN Boot-Loop, No Recovery, PC does not recognize, ODIN and ADB do not recognize. Trapped. Help?!?!
I am in a similar situation with my note II I am going to try to enter Download mode, with windows vista and see what I can come up with. Have you had any luck?
I plugged in and flashed the latest update via odin, and am booted into a fresh install. GL
Still at it.
Good to see that you got yours fixed.
Sigh... but alas my problem is a bit more complex. After a chat with Samsung about it they said that the OS is corrupted (duh) and that they wouldn't help me without quite a bit of money. Seeing as how the warranty is long gone.
However I have been tinkering with nvflash and there's a glimmer of hope in it. But that whole unable to connect thing is really complicating things.
I have a TAB 10.1 GT P7510, I used mobile Odin for flash a recovery, and don't boot, solution?
Greetings,
My son has a Galaxy s2 running stock 2.3 which he bought in Singapore over a year ago, I think. He states that it has not been rooted. Over the last several weeks he has been getting the 'kernal panic upload mode' screen when the battery was getting low. Last week it became permenant regardless of the battery level. Yesterday I was able to talk him through entering recovery mode. He wiped the partition cache and rebooted with no apparent effect. A picture of the recovery mode screen idicates that the system was unable to mount /data (unknown error: 0). But it did show media files were copied succesfully. ... I've attached a picture of the screen. The phone is no longer recognized in Win7.
My basic question. How might we rescue the pictures and some text from the phone before redoing the os?
TIA,
Kim
Kim, flash siyah v5 and try cwm.
Also drill your son on what is that he did exactly, cause he must have done something.
Sent from the little guy
I had thought that if all else failed I would have him use Odin to re-apply his existing os. My thinking was that the file and partition structure would be close enough to what's there to allow normal usb connection and to d/l his pics and what not. Then I'd get him to install something with a little more support for recovery and snooping about. Decent enhancements!!
I don't know what he did other than I think he might have overloaded the little beast with too many apps constantly calling home on an older os. But, that's just a guess. Thanks for the upgrade suggestions. I'm only starting to research that aspect. I suspect that going direct to the better burns will be the way we'll end up going.
Be well,
Kim
Siyah is a custom kernel, no danger regarding existing data.
By flashing it you'll be able to access a temp recovery called clockwork mode.
Sent from the little guy
Greetings gastonw,
My son's getting the usb drivers from the Samsung site for the i9100. I found the tar Siyah-s2-v5.0.1.tar for Odin.
Odin3 version is 3.04. Don't know what else I need.
I'm going to be doing this long distance and I've not handled a smart phone personally so ...
1. Start the phone in download mode.
2. Connect phone to computer
3. Start Odin (making sure that Kies is not running), Odin should recognize the phone.
4. Load the tar in the pda section
5. check automatic reboot, and start.
6. I presume that I will know when it's done because odin will report success or finished, and the phone will boot.
To grab the data off this phone do we use the recovery mode or will it now be called clockwork mode?
At which point I presume we shut the phone down and do a normal start/boot.
Any thoughts would be appreciated. Thanks for your help. Reading the specs on the Siya work I'm almost tempted
to go get a phone for myself.
Be well,
Kim
Lol, that's awesome, your playing by the book
Custom recovery will become CWM instead of stock recovery.
And go ahead and get yourself a new phone, you're in for a hell of a ride.
Sent from the little guy
Thank!! My son called and said the usb still doesn't work. Hum .... I hope not, but I may be back to see if there's a way to transfer something from an sd card in order to save the data. On the flip side ...
Kim
Odin doesn't see his device or the pc calls it "unknown device"?
Can he get it to boot, he can use airdroid app or dropbox to transfer over wifi.
The custom kernel is just to get rid of that pabic message.
Sent from the little guy
Mornin' gastonw,
Well, as of a couple of minutes ago, win7 did not recognize the phone. Hopefully with a reinstallation of the Samsung specific usb drivers win7 and/or Odin will recognize the phone.
Interesting. When he booted into download mode the top of the screen said something like, 'Odin download mode'. Does this indicate that it might be rooted? To the best of my knowledge he was unaware of the three button boot loader mode and hence would not have changed the phone from the basic generic non-branded phone that he bought. Just wondering. If it is rooted is there a way to manually do, via the recovery mode, what Odin will be doing? It seems to me that if recovery allows to d/l from the sd card there must be a destination to be designated. I have no idea what the drive and directory layout is, and I'm a tad rusty on linix shell commands, don't even know what shell android uses. But, if I knew where the package had to go ... .
I'll write again when I know more.
Thanks again,
Kim
Well the last I heard is that no USB *and* it's probably a win7 problem!!!! Good golly miss molly!
Anyway, snooping about I found a thread [howto] which indicated that putting a clock work mod zip on an sd and d/ling it thru the recovery mode would install the clock work mod recovery boot.
http://forum.xda-developers.com/showthread.php?t=1814801
Now I can not find a further reference to a zip with the name format used in this post. However at the modclockwork site I do find two
http://clockworkmod.com/rommanager. One is for 'touch'. I don't know the difference between the two. But, am I understanding correctly that I can put the appropriate zip on an sd from which I can d/l thru the standard recovery mode which on restart I presume will give me access to cmw recovery mode? Seems to easy. LOL!!!
Any help would be appreciated.
Kim
This is how you root & flash cwm via recovery: http://m.youtube.com/#/watch?v=7psIQU69h3M&desktop_uri=/watch?v=7psIQU69h3M&gl=MX
Tell him to try another PC to see if it sees the device.
Genuine s2 usb I assume?
Sent from the little guy
I recently got my new Verizon Galaxy S4 and decided to play around with it. I got it rooted fine and got a few apps on there (like Titanium backup) and decided that, since I would eventually want to play around with ROMs, I would want to unlock the phone.
I looked around and found there were some options for me, the one I chose being the "all in one" option that roots, unlocks and installs a custom recovery mode for you. I went through this process and now get nothing but the Downloader Mode (could not do normal boot). Even if I pop out the battery and try to reboot it, I get this screen.
I later found that apparently the ME7 model currently will not accept attempts to unlock the phone and install a custom ROM or recovery menu. How do I fix this? I tried using Odin, but it doesn't recognize the phone as being connected. I am currently trying other methods like Kies, to see if there is any way to at least to an emergency recovery and get it back to normal.
EDIT: Ran into the same issue with Kies as I did with Odin, it does not see anything connected to the computer.
Do you have the correct drivers installed? Does adb recognize the device? You're in Odin mode when you try to use Odin to push something? I believe with ME7 you can Odin back to the official stuff.
Sent from my SCH-I545 using Tapatalk 4
TheColdOne said:
I recently got my new Verizon Galaxy S4 and decided to play around with it. I got it rooted fine and got a few apps on there (like Titanium backup) and decided that, since I would eventually want to play around with ROMs, I would want to unlock the phone.
I looked around and found there were some options for me, the one I chose being the "all in one" option that roots, unlocks and installs a custom recovery mode for you. I went through this process and now get nothing but the Downloader Mode (could not do normal boot). Even if I pop out the battery and try to reboot it, I get this screen.
I later found that apparently the ME7 model currently will not accept attempts to unlock the phone and install a custom ROM or recovery menu. How do I fix this? I tried using Odin, but it doesn't recognize the phone as being connected. I am currently trying other methods like Kies, to see if there is any way to at least to an emergency recovery and get it back to normal.
EDIT: Ran into the same issue with Kies as I did with Odin, it does not see anything connected to the computer.
Click to expand...
Click to collapse
You need to make sure you have the drivers for the phone and have a solid USB connection (I prefer the rear of a tower)
sent from my GE gs4
I ended up getting it to work. I had to go here:
http://www.intel.com/support/chipsets/inf/sb/CS-013541.htm
and get files to get the computer to recognize the device. Even afterwards, Keis had no idea what was going on, and Odin saw it and was able to install a stock firmware I downloaded earlier, saving the phone.
For now I will be satisfied with just root access and will wait for ROM capabilities.
I hate to hijack a thread but I'm stuck here. My GS 4 (Vzw) was supposedly successfully rooted using TWRP, but now I have no way to enter any sort of recovery. The package I downloaded for the root does not have an Odin version to run. I've been getting the endless prompts to install the 4.3 update but there is no way to do this on my phone. I get the same "Could not do normal boot. Odin mode. Write protection enabled" message with the downloading screen. I try to boot into recovery via CWM or Goomanager but it always goes to the same screen. I can't make any backups or restore now either or I would just do a factory reset. Any ideas? I'm on VRUAME7.
Um.... there's no recovery available with ME7.... are you on the MDK bootloader?
Sent from your mom's smartphone
I don't think so but how would I confirm? I'm just trying to get the 4.3 update installed but at every attempt it goes into Odin Mode and gets stuck.
BoltsRUs said:
I don't think so but how would I confirm? I'm just trying to get the 4.3 update installed but at every attempt it goes into Odin Mode and gets stuck.
Click to expand...
Click to collapse
You're said that you're on ME7 - what you need to do is to flash the "No wipe" ME7 ROM onto your phone. It's in the Development forum.
http://forum.xda-developers.com/showthread.php?t=2301259
You've got to update to MI1 before you can install the 4.3 update (MJ7).
ONLY flash files intended for whatever release you're running. You can't mix and match, can't go backwards, and can't skip updates.
Theres also an ml1 factory image in the dev section.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
TheColdOne said:
I ended up getting it to work. I had to go here:
and get files to get the computer to recognize the device. Even afterwards, Keis had no idea what was going on, and Odin saw it and was able to install a stock firmware I downloaded earlier, saving the phone.
For now I will be satisfied with just root access and will wait for ROM capabilities.
Click to expand...
Click to collapse
Hi! Sorry to kind of "butt in" on your thread, but I'm somewhat of a noob and have the same exact problem as you. If you don't mind, can you explain what you downloaded from Intel and what you did afterwards that fixed your problem? I'd really appreciate it, since my phone's been dead to me for more than a week now....
nyankat said:
Hi! Sorry to kind of "butt in" on your thread, but I'm somewhat of a noob and have the same exact problem as you. If you don't mind, can you explain what you downloaded from Intel and what you did afterwards that fixed your problem? I'd really appreciate it, since my phone's been dead to me for more than a week now....
Click to expand...
Click to collapse
On that page I linked to, look for this:
Solution:
Download and run the Intel® Chipset Software Installation Utility so Windows* properly recognizes the SMBus controller.
Get the proper driver download according to your OS, then install it. This should allow Odin to see the phone for you to install a clean copy of the stock ROM onto the phone.
If you want more details I am sorry to say I cannot provide them. When things involve me fixing my own technology, it is a lot of rapid-fire troubleshooting and I just go with what sticks without really memorizing what I did (so if I run into this issue again, I have to re-research).
TheColdOne said:
On that page I linked to, look for this:
Solution:
Download and run the Intel® Chipset Software Installation Utility so Windows* properly recognizes the SMBus controller.
Get the proper driver download according to your OS, then install it. This should allow Odin to see the phone for you to install a clean copy of the stock ROM onto the phone.
If you want more details I am sorry to say I cannot provide them. When things involve me fixing my own technology, it is a lot of rapid-fire troubleshooting and I just go with what sticks without really memorizing what I did (so if I run into this issue again, I have to re-research).
Click to expand...
Click to collapse
Thanks! Finally Oden recognizes my phone
my amazing method
the same problem was with me 3-4 weeks ago...
follow the url-
dbloo dbloo dbloo dot autoroot dot chainfire dot eu
(i cant post the URL because the website is not allowing me.....understand and use the code)
1) choose your samsung model and download the recovery file
2) download and open odin on a dekstop
3) connect your device to the dekstop
4) press the volume down, home button and power button together till the screen changes
5) press the volume down button again
6) odin will show the message "attatched or connected"
7) click pda
8) attatch the file you downloaded
9) your device will be fixed and will be restarted
ur welcome
hai i am stuck at download mode with message as could not normal boot how to fix it
:highfive: Hi !
I run Windows 7, Samsung Galaxy S7390G (rooted) originally under stock rom (because there's no custom rom for my phone :crying:,) and without any custom recovery (because there's no custom recovery for my phone)
I had problem with my internal SD card, I posted on forums, but not this one, and had no help, so I decided to restock my phone.
I used Odin, because I failed with Heimdall, and Odin began flashing my Rom, but gave me a red "fail" message error.
I tried the SamMobile's stock rom for my device, S7390. I tried several ones, always S7390, and Odin failed each time, and stuck me in half-bricked state.
Note: My old computer is with Linux Mint, but I can't use it for now, but I can make a live USB with a Linux distro under the Window computer that I use now if it helps.
I have sometimes some trouble with the USB drivers, and I have been forced to reinstall them many times, trying different packages. For now, but I don't know if it will last, Odin is able to recognize my phone, but each time I try to flash a Rom, it fails. I tried another USB cable, and other USB ports, same thing...
I don't know what to do? I read that there was solution with the adb command, I'll read about it, because I have poor knowledge, but I despair
Even if I know it can be repair, but I can't do it! :crying:
I can only access to download mode.
Please, help a poor despaired French girl. Thank you very much.
Nobody?
None to help? :crying:
Same Problem
No worrys darling you can just go to recovery mode of your phone and select wipe factory data reset and then your phone will reboot and it will be as new as you bought it that time only.
Hope it helps
Sent from my GT-I9300 using XDA Free mobile app
Was trying to go from GB 2.3.3 to OmniROM 4.4.4 on a friend’s S2 (GT I-9100).
I rooted using Framaroot (the first version, the latest wouldnt work), got root, checked with RootChecker. Then I tried to install CWM.
Spent hours trying, I wanted to do everything "on device" rather than use Heidal or ADB (use inux on my desktop), tried MobileOdin, but there was no "recovery" option, so tried ROM Manager using a guide ( http://luvis.se/tipstricks/root-and-install-kitkat-on-samsung-galaxy-s2-i9100-without-a-computer/ ), but kept failing cos of E signature verification, even though ROM Manager said it was installed.
I d spent hours and hours on the internet looking for how to install, seems its difficult because the device was GB.
So I tried MobileOdin again and just installed the "CWM-KitKatCompatible-i9100.zip" I downloaded from the above guide using the "install update.zip" option, I cancelled it when the warning came up about firmware can brick your device, but then hit "ok" (partly in frustration and partly cos I ve never bricked a device before as I m (USUALLY) always careful).
Now it just boots the the Samsung Galaxy S2 screen, then the screen goes blank after 10 seconds or so. Stupid, stupid me.
So can anyone help me recover it using ADB, Android Studio or maybe Heimdal or direct me to a guide on how to ? Everything I read uses Odin and assumes you can get into recovery. All that time trying to avoid connecting it to a pc and now I ve deffo got to.
typos1 said:
Was trying to go from GB 2.3.3 to OmniROM 4.4.4 on a friend’s S2 (GT I-9100).
I rooted using Framaroot (the first version, the latest wouldnt work), got root, checked with RootChecker. Then I tried to install CWM.
Spent hours trying, I wanted to do everything "on device" rather than use Heidal or ADB (use inux on my desktop), tried MobileOdin, but there was no "recovery" option, so tried ROM Manager using a guide ( http://luvis.se/tipstricks/root-and-install-kitkat-on-samsung-galaxy-s2-i9100-without-a-computer/ ), but kept failing cos of E signature verification, even though ROM Manager said it was installed.
I d spent hours and hours on the internet looking for how to install, seems its difficult because the device was GB.
So I tried MobileOdin again and just installed the "CWM-KitKatCompatible-i9100.zip" I downloaded from the above guide using the "install update.zip" option, I cancelled it when the warning came up about firmware can brick your device, but then hit "ok" (partly in frustration and partly cos I ve never bricked a device before as I m (USUALLY) always careful).
Now it just boots the the Samsung Galaxy S2 screen, then the screen goes blank after 10 seconds or so. Stupid, stupid me.
So can anyone help me recover it using ADB, Android Studio or maybe Heimdal or direct me to a guide on how to ? Everything I read uses Odin and assumes you can get into recovery. All that time trying to avoid connecting it to a pc and now I ve deffo got to.
Click to expand...
Click to collapse
Can you get into download or recovery mode?
noppy22 said:
Can you get into download or recovery mode?
Click to expand...
Click to collapse
Cant get into recovery but can get into download mode. Tried One-click Unbrick and it cant connect to device, which reminded me that when I connected it to my (Ubuntu) pc (before I bricked it) I got an error message saying it couldn’t mount Android device (I got rid of my S2 a couple of years ago but it always connected to my pc with no problems). Which seems to me like a real problem - how can I un-brick it if I cant connect via USB ?
typos1 said:
Cant get into recovery but can get into download mode. Tried One-click Unbrick and it cant connect to device, which reminded me that when I connected it to my (Ubuntu) pc (before I bricked it) I got an error message saying it couldn’t mount Android device (I got rid of my S2 a couple of years ago but it always connected to my pc with no problems). Which seems to me like a real problem - how can I un-brick it if I cant connect via USB ?
Click to expand...
Click to collapse
First, I don't have any experience with ubuntu, so I would suggest connecting to a windows pc via usb, making sure you install the drivers for the s2, then download odin. Once you have odin setup, I would flash a stock rom .tar from sammobile.com. From there you can flash a kernel such as philz to gain root access, and then omni or other rom.
noppy22 said:
First, I don't have any experience with ubuntu, so I would suggest connecting to a windows pc via usb, making sure you install the drivers for the s2, then download odin. Once you have odin setup, I would flash a stock rom .tar from sammobile.com. From there you can flash a kernel such as philz to gain root access, and then omni or other rom.
Click to expand...
Click to collapse
Heimdal on Ubuntu (or a Mac) will do the same job as Odin on Windows (and is more reliable), but I have this USB problem I mentioned above, so I m not sure anything is going to work if theres a problem with USB on the device (USB debugging was enabled). One-Click Unbrick cannot connect to it and nor can my pc.
typos1 said:
Heimdal on Ubuntu (or a Mac) will do the same job as Odin on Windows (and is more reliable), but I have this USB problem I mentioned above, so I m not sure anything is going to work if theres a problem with USB on the device (USB debugging was enabled). One-Click Unbrick cannot connect to it and nor can my pc.
Click to expand...
Click to collapse
Probably obvious, and you've maybe tried already, but will a different usb data cord work? And I would try a different pc just to rule it out.
Here is something to read as well about recovering from soft bricks. Hope it helps -
http://forum.xda-developers.com/galaxy-s2/general/guide-fix-unflashable-soft-bricked-gsii-t1449771
noppy22 said:
Probably obvious, and you've maybe tried already, but will a different usb data cord work? And I would try a different pc just to rule it out.
Here is something to read as well about recovering from soft bricks. Hope it helps -
http://forum.xda-developers.com/galaxy-s2/general/guide-fix-unflashable-soft-bricked-gsii-t1449771
Click to expand...
Click to collapse
Thanks, already read that, its not the cable as I use it on other devices without problems.
typos1 said:
Thanks, already read that, its not the cable as I use it on other devices without problems.
Click to expand...
Click to collapse
Mate, the only thing I can suggest is make sure you have drivers for the phone(although the message saying can't mount device indicates a problem like corrupted partitions or nand, rather than missing drivers), and try a different pc. The fact you can get into download mode at least suggests you can flash a kernel or something, but you need a connection to the pc to do that(as you already know). I hope someone else has some other ideas
noppy22 said:
Mate, the only thing I can suggest is make sure you have drivers for the phone(although the message saying can't mount device indicates a problem like corrupted partitions or nand, rather than missing drivers), and try a different pc. The fact you can get into download mode at least suggests you can flash a kernel or something, but you need a connection to the pc to do that(as you already know). I hope someone else has some other ideas
Click to expand...
Click to collapse
I wont need drivers as Linux has drivers built into it - it works out of the box, no messing around installing them like with Windows.
I just gotta spend some time getting the firmware and finding instructions on doing it with Heimdall, theres so many versions of the S2 it makes finding the right software complex.
And I ve just got to hope there isnt a problem with the usb port on the device or I m really buggered
typos1 said:
I wont need drivers as Linux has drivers built into it - it works out of the box, no messing around installing them like with Windows.
I just gotta spend some time getting the firmware and finding instructions on doing it with Heimdall, theres so many versions of the S2 it makes finding the right software complex.
And I ve just got to hope there isnt a problem with the usb port on the device or I m really buggered
Click to expand...
Click to collapse
Lol, I forgot that on Samsung devices you have to press home as well as power and vol up for recovery, found this out while trying to fins out how to unbrick it !
It wouldnnt boot but it WOULD boot to recovery, CWM recovery !
So flashed a CM kernel then Omni and all is fine, OmniROM installed !
typos1 said:
Lol, I forgot that on Samsung devices you have to press home as well as power and vol up for recovery, found this out while trying to fins out how to unbrick it !
It wouldnnt boot but it WOULD boot to recovery, CWM recovery !
So flashed a CM kernel then Omni and all is fine, OmniROM installed !
Click to expand...
Click to collapse
Haha! The simple things in life....
noppy22 said:
Haha! The simple things in life....
Click to expand...
Click to collapse
Yeah !
Ta for your input !
Try flashing official frimware with odin or flash siyah kernel with heimdal
Should fix your problem