Was trying to go from GB 2.3.3 to OmniROM 4.4.4 on a friend’s S2 (GT I-9100).
I rooted using Framaroot (the first version, the latest wouldnt work), got root, checked with RootChecker. Then I tried to install CWM.
Spent hours trying, I wanted to do everything "on device" rather than use Heidal or ADB (use inux on my desktop), tried MobileOdin, but there was no "recovery" option, so tried ROM Manager using a guide ( http://luvis.se/tipstricks/root-and-install-kitkat-on-samsung-galaxy-s2-i9100-without-a-computer/ ), but kept failing cos of E signature verification, even though ROM Manager said it was installed.
I d spent hours and hours on the internet looking for how to install, seems its difficult because the device was GB.
So I tried MobileOdin again and just installed the "CWM-KitKatCompatible-i9100.zip" I downloaded from the above guide using the "install update.zip" option, I cancelled it when the warning came up about firmware can brick your device, but then hit "ok" (partly in frustration and partly cos I ve never bricked a device before as I m (USUALLY) always careful).
Now it just boots the the Samsung Galaxy S2 screen, then the screen goes blank after 10 seconds or so. Stupid, stupid me.
So can anyone help me recover it using ADB, Android Studio or maybe Heimdal or direct me to a guide on how to ? Everything I read uses Odin and assumes you can get into recovery. All that time trying to avoid connecting it to a pc and now I ve deffo got to.
typos1 said:
Was trying to go from GB 2.3.3 to OmniROM 4.4.4 on a friend’s S2 (GT I-9100).
I rooted using Framaroot (the first version, the latest wouldnt work), got root, checked with RootChecker. Then I tried to install CWM.
Spent hours trying, I wanted to do everything "on device" rather than use Heidal or ADB (use inux on my desktop), tried MobileOdin, but there was no "recovery" option, so tried ROM Manager using a guide ( http://luvis.se/tipstricks/root-and-install-kitkat-on-samsung-galaxy-s2-i9100-without-a-computer/ ), but kept failing cos of E signature verification, even though ROM Manager said it was installed.
I d spent hours and hours on the internet looking for how to install, seems its difficult because the device was GB.
So I tried MobileOdin again and just installed the "CWM-KitKatCompatible-i9100.zip" I downloaded from the above guide using the "install update.zip" option, I cancelled it when the warning came up about firmware can brick your device, but then hit "ok" (partly in frustration and partly cos I ve never bricked a device before as I m (USUALLY) always careful).
Now it just boots the the Samsung Galaxy S2 screen, then the screen goes blank after 10 seconds or so. Stupid, stupid me.
So can anyone help me recover it using ADB, Android Studio or maybe Heimdal or direct me to a guide on how to ? Everything I read uses Odin and assumes you can get into recovery. All that time trying to avoid connecting it to a pc and now I ve deffo got to.
Click to expand...
Click to collapse
Can you get into download or recovery mode?
noppy22 said:
Can you get into download or recovery mode?
Click to expand...
Click to collapse
Cant get into recovery but can get into download mode. Tried One-click Unbrick and it cant connect to device, which reminded me that when I connected it to my (Ubuntu) pc (before I bricked it) I got an error message saying it couldn’t mount Android device (I got rid of my S2 a couple of years ago but it always connected to my pc with no problems). Which seems to me like a real problem - how can I un-brick it if I cant connect via USB ?
typos1 said:
Cant get into recovery but can get into download mode. Tried One-click Unbrick and it cant connect to device, which reminded me that when I connected it to my (Ubuntu) pc (before I bricked it) I got an error message saying it couldn’t mount Android device (I got rid of my S2 a couple of years ago but it always connected to my pc with no problems). Which seems to me like a real problem - how can I un-brick it if I cant connect via USB ?
Click to expand...
Click to collapse
First, I don't have any experience with ubuntu, so I would suggest connecting to a windows pc via usb, making sure you install the drivers for the s2, then download odin. Once you have odin setup, I would flash a stock rom .tar from sammobile.com. From there you can flash a kernel such as philz to gain root access, and then omni or other rom.
noppy22 said:
First, I don't have any experience with ubuntu, so I would suggest connecting to a windows pc via usb, making sure you install the drivers for the s2, then download odin. Once you have odin setup, I would flash a stock rom .tar from sammobile.com. From there you can flash a kernel such as philz to gain root access, and then omni or other rom.
Click to expand...
Click to collapse
Heimdal on Ubuntu (or a Mac) will do the same job as Odin on Windows (and is more reliable), but I have this USB problem I mentioned above, so I m not sure anything is going to work if theres a problem with USB on the device (USB debugging was enabled). One-Click Unbrick cannot connect to it and nor can my pc.
typos1 said:
Heimdal on Ubuntu (or a Mac) will do the same job as Odin on Windows (and is more reliable), but I have this USB problem I mentioned above, so I m not sure anything is going to work if theres a problem with USB on the device (USB debugging was enabled). One-Click Unbrick cannot connect to it and nor can my pc.
Click to expand...
Click to collapse
Probably obvious, and you've maybe tried already, but will a different usb data cord work? And I would try a different pc just to rule it out.
Here is something to read as well about recovering from soft bricks. Hope it helps -
http://forum.xda-developers.com/galaxy-s2/general/guide-fix-unflashable-soft-bricked-gsii-t1449771
noppy22 said:
Probably obvious, and you've maybe tried already, but will a different usb data cord work? And I would try a different pc just to rule it out.
Here is something to read as well about recovering from soft bricks. Hope it helps -
http://forum.xda-developers.com/galaxy-s2/general/guide-fix-unflashable-soft-bricked-gsii-t1449771
Click to expand...
Click to collapse
Thanks, already read that, its not the cable as I use it on other devices without problems.
typos1 said:
Thanks, already read that, its not the cable as I use it on other devices without problems.
Click to expand...
Click to collapse
Mate, the only thing I can suggest is make sure you have drivers for the phone(although the message saying can't mount device indicates a problem like corrupted partitions or nand, rather than missing drivers), and try a different pc. The fact you can get into download mode at least suggests you can flash a kernel or something, but you need a connection to the pc to do that(as you already know). I hope someone else has some other ideas
noppy22 said:
Mate, the only thing I can suggest is make sure you have drivers for the phone(although the message saying can't mount device indicates a problem like corrupted partitions or nand, rather than missing drivers), and try a different pc. The fact you can get into download mode at least suggests you can flash a kernel or something, but you need a connection to the pc to do that(as you already know). I hope someone else has some other ideas
Click to expand...
Click to collapse
I wont need drivers as Linux has drivers built into it - it works out of the box, no messing around installing them like with Windows.
I just gotta spend some time getting the firmware and finding instructions on doing it with Heimdall, theres so many versions of the S2 it makes finding the right software complex.
And I ve just got to hope there isnt a problem with the usb port on the device or I m really buggered
typos1 said:
I wont need drivers as Linux has drivers built into it - it works out of the box, no messing around installing them like with Windows.
I just gotta spend some time getting the firmware and finding instructions on doing it with Heimdall, theres so many versions of the S2 it makes finding the right software complex.
And I ve just got to hope there isnt a problem with the usb port on the device or I m really buggered
Click to expand...
Click to collapse
Lol, I forgot that on Samsung devices you have to press home as well as power and vol up for recovery, found this out while trying to fins out how to unbrick it !
It wouldnnt boot but it WOULD boot to recovery, CWM recovery !
So flashed a CM kernel then Omni and all is fine, OmniROM installed !
typos1 said:
Lol, I forgot that on Samsung devices you have to press home as well as power and vol up for recovery, found this out while trying to fins out how to unbrick it !
It wouldnnt boot but it WOULD boot to recovery, CWM recovery !
So flashed a CM kernel then Omni and all is fine, OmniROM installed !
Click to expand...
Click to collapse
Haha! The simple things in life....
noppy22 said:
Haha! The simple things in life....
Click to expand...
Click to collapse
Yeah !
Ta for your input !
Try flashing official frimware with odin or flash siyah kernel with heimdal
Should fix your problem
Related
Okay guys, never let me down before, lets see if you can keep a perfect score
This is not my first time rooting, i've rooted at least 3 phones thus far, and I am trying to root my Samsung Fascinate. I've tried z4root, Superoneclick and adb. None of them took. I believe it may be something with my drivers, but before I get into specifics, let me give you my information:
~~~~PHONE~~~~
Hardware version: I500.04
Model SCH-I500
Firmware: 2.2.2
Kernel version: 2.6.32.9
Build Number: SCH-I500.ED05
~~~~COMPUTER~~~~
Microsoft Windows XP Media Center Edition Version 2002 Service Pack 3.
Ok so now that's out there, what am I doing wrong? when I tried z4root 1.3.0, it got the point where it said "acquiring root shell, then the phone vibrated 3 times and the app closed. Super one click, the prompt got stuck on "waiting for phone" ADB, the device won't even show up in the list of devices. I can't seem to find the right drivers anywhere.
It may be important to note that I am using my data cable from my optimus v, and when I plug it in, the micro-usb dongle doesn't go all the way into the port on the fascinate. However, the fascinate gives me the notification that usb mode can be activate and that debugging is on, etc.
I made sure that mock locations, and usb debugging were both on.
Any help?
Follow these steps in link:
http://www.galaxyforums.net/forum/fascinate-rs-guides/1967-how-root-froyo-gingerbread-your-fascinate.html
Ive always used ADB and pushed over the files and such.
However are you going to flash another rom? If so just Odin recovery, flash the rom and be done with it.
I have to have root for that right? My drivers aren't working, is there a way to flash it with out a computer
OhioYJ said:
Ive always used ADB and pushed over the files and such.
However are you going to flash another rom? If so just Odin recovery, flash the rom and be done with it.
Click to expand...
Click to collapse
Sent from my LG Optimus V running Sense 3.0
You need a REAL cable... If computer doesn't see the phone via the drivers, nothing is going to work.
OhioYJ said:
However are you going to flash another rom? If so just Odin recovery, flash the rom and be done with it.
Click to expand...
Click to collapse
agreed! If you want a different rom, alot of the steps in that link I posted a not needed. Just odin the proper recovery for the rom you intend on flashing. boot into recovery and wipe data,cache,dalvik, then install rom.zip from sd card. reboot and the phone should be rooted.
droidstyle said:
Follow these steps in link:
http://www.galaxyforums.net/forum/fascinate-rs-guides/1967-how-root-froyo-gingerbread-your-fascinate.html
Click to expand...
Click to collapse
Downloaded everything in the link, installed drivers, I'm on my friends laptop now, still xp. I got to the step where I have to find CWM3 Voodoo in Odin, and the instructions say that one of the boxes should have turned yellow, but it didn't. I went on ahead and clicked the pda button, but it just said success 0/failure 0. What do I do? Do I have to have vista?
That means odin is not recognizing the phone. Im not sure if odin works with xp or vista... I only use 7 these days. Actually if my memory serves right, odin dont work with xp, don't quote me tho. You could try heimdall but I have no experience with it.
Still can't squire root.I've factory rest 3 times now and still nothing. Can no one help?
Sent from my LG Optimus V running Sense 3.0
If u can't get odin or heimdall to work, you won't be able to root. Do you not have windows 7
droidstyle said:
If u can't get odin or heimdall to work, you won't be able to root. Do you not have windows 7
Click to expand...
Click to collapse
as stated in the op, I explicitly said I am using windows xp, media center 2002, service pack 3 to be specific. So your telling me I'm S.O.L.?
first, get a real cable
then, go to official samsung website and install the correct fascinate drivers
download and open odin v3 1.30 (I have xp and it works)
plug in phone in download mode, wait for odin box to turn yellow
pick file in pda
and press start
then just go into cwm via 3 fingers and flash rom
dragon1357 said:
first, get a real cable
then, go to official samsung website and install the correct fascinate drivers
download and open odin v3 1.30 (I have xp and it works)
plug in phone in download mode, wait for odin box to turn yellow
pick file in pda
and press start
then just go into cwm via 3 fingers and flash rom
Click to expand...
Click to collapse
I have my cable from my samsung intercept, would that work? By the way thanks for being so informative. Could you pm the drivers you used, if you have them?
Sent from my LG Optimus V running Sense 3.0
I'm not saying that you shouldn't be doing this but I think you need to slow down and read some more before trying. While this phone is pretty dang hard to brick without physical damage, lacking basic knowledge can put you down got a while if something goes wrong.
A good place to start is the qa stickies. Again I'm not saying don't, just maybe give it another day or two. Really sucks rushing in soft bricking and having to learn after with no phone in the mean time.
XDA Prem app Running UKB w PBJ
MattRussNC said:
I'm not saying that you shouldn't be doing this but I think you need to slow down and read some more before trying. While this phone is pretty dang hard to brick without physical damage, lacking basic knowledge can put you down got a while if something goes wrong.
A good place to start is the qa stickies. Again I'm not saying don't, just maybe give it another day or two. Really sucks rushing in soft bricking and having to learn after with no phone in the mean time.
XDA Prem app Running UKB w PBJ
Click to expand...
Click to collapse
Not trying too be an ass or anything but 1.) This is my 5th or 6th time rooting. I have more than basic knowledge. 2.) This is a spare phone I picked up dirt cheap for development. 3.) I checked every place possible trying to find out why my drivers weren't working including q&a.
That aside, I'm trying it on my friends laptop with vista. Wish me luck.
Sent from my SCH-I500 using XDA App
I recently got my new Verizon Galaxy S4 and decided to play around with it. I got it rooted fine and got a few apps on there (like Titanium backup) and decided that, since I would eventually want to play around with ROMs, I would want to unlock the phone.
I looked around and found there were some options for me, the one I chose being the "all in one" option that roots, unlocks and installs a custom recovery mode for you. I went through this process and now get nothing but the Downloader Mode (could not do normal boot). Even if I pop out the battery and try to reboot it, I get this screen.
I later found that apparently the ME7 model currently will not accept attempts to unlock the phone and install a custom ROM or recovery menu. How do I fix this? I tried using Odin, but it doesn't recognize the phone as being connected. I am currently trying other methods like Kies, to see if there is any way to at least to an emergency recovery and get it back to normal.
EDIT: Ran into the same issue with Kies as I did with Odin, it does not see anything connected to the computer.
Do you have the correct drivers installed? Does adb recognize the device? You're in Odin mode when you try to use Odin to push something? I believe with ME7 you can Odin back to the official stuff.
Sent from my SCH-I545 using Tapatalk 4
TheColdOne said:
I recently got my new Verizon Galaxy S4 and decided to play around with it. I got it rooted fine and got a few apps on there (like Titanium backup) and decided that, since I would eventually want to play around with ROMs, I would want to unlock the phone.
I looked around and found there were some options for me, the one I chose being the "all in one" option that roots, unlocks and installs a custom recovery mode for you. I went through this process and now get nothing but the Downloader Mode (could not do normal boot). Even if I pop out the battery and try to reboot it, I get this screen.
I later found that apparently the ME7 model currently will not accept attempts to unlock the phone and install a custom ROM or recovery menu. How do I fix this? I tried using Odin, but it doesn't recognize the phone as being connected. I am currently trying other methods like Kies, to see if there is any way to at least to an emergency recovery and get it back to normal.
EDIT: Ran into the same issue with Kies as I did with Odin, it does not see anything connected to the computer.
Click to expand...
Click to collapse
You need to make sure you have the drivers for the phone and have a solid USB connection (I prefer the rear of a tower)
sent from my GE gs4
I ended up getting it to work. I had to go here:
http://www.intel.com/support/chipsets/inf/sb/CS-013541.htm
and get files to get the computer to recognize the device. Even afterwards, Keis had no idea what was going on, and Odin saw it and was able to install a stock firmware I downloaded earlier, saving the phone.
For now I will be satisfied with just root access and will wait for ROM capabilities.
I hate to hijack a thread but I'm stuck here. My GS 4 (Vzw) was supposedly successfully rooted using TWRP, but now I have no way to enter any sort of recovery. The package I downloaded for the root does not have an Odin version to run. I've been getting the endless prompts to install the 4.3 update but there is no way to do this on my phone. I get the same "Could not do normal boot. Odin mode. Write protection enabled" message with the downloading screen. I try to boot into recovery via CWM or Goomanager but it always goes to the same screen. I can't make any backups or restore now either or I would just do a factory reset. Any ideas? I'm on VRUAME7.
Um.... there's no recovery available with ME7.... are you on the MDK bootloader?
Sent from your mom's smartphone
I don't think so but how would I confirm? I'm just trying to get the 4.3 update installed but at every attempt it goes into Odin Mode and gets stuck.
BoltsRUs said:
I don't think so but how would I confirm? I'm just trying to get the 4.3 update installed but at every attempt it goes into Odin Mode and gets stuck.
Click to expand...
Click to collapse
You're said that you're on ME7 - what you need to do is to flash the "No wipe" ME7 ROM onto your phone. It's in the Development forum.
http://forum.xda-developers.com/showthread.php?t=2301259
You've got to update to MI1 before you can install the 4.3 update (MJ7).
ONLY flash files intended for whatever release you're running. You can't mix and match, can't go backwards, and can't skip updates.
Theres also an ml1 factory image in the dev section.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
TheColdOne said:
I ended up getting it to work. I had to go here:
and get files to get the computer to recognize the device. Even afterwards, Keis had no idea what was going on, and Odin saw it and was able to install a stock firmware I downloaded earlier, saving the phone.
For now I will be satisfied with just root access and will wait for ROM capabilities.
Click to expand...
Click to collapse
Hi! Sorry to kind of "butt in" on your thread, but I'm somewhat of a noob and have the same exact problem as you. If you don't mind, can you explain what you downloaded from Intel and what you did afterwards that fixed your problem? I'd really appreciate it, since my phone's been dead to me for more than a week now....
nyankat said:
Hi! Sorry to kind of "butt in" on your thread, but I'm somewhat of a noob and have the same exact problem as you. If you don't mind, can you explain what you downloaded from Intel and what you did afterwards that fixed your problem? I'd really appreciate it, since my phone's been dead to me for more than a week now....
Click to expand...
Click to collapse
On that page I linked to, look for this:
Solution:
Download and run the Intel® Chipset Software Installation Utility so Windows* properly recognizes the SMBus controller.
Get the proper driver download according to your OS, then install it. This should allow Odin to see the phone for you to install a clean copy of the stock ROM onto the phone.
If you want more details I am sorry to say I cannot provide them. When things involve me fixing my own technology, it is a lot of rapid-fire troubleshooting and I just go with what sticks without really memorizing what I did (so if I run into this issue again, I have to re-research).
TheColdOne said:
On that page I linked to, look for this:
Solution:
Download and run the Intel® Chipset Software Installation Utility so Windows* properly recognizes the SMBus controller.
Get the proper driver download according to your OS, then install it. This should allow Odin to see the phone for you to install a clean copy of the stock ROM onto the phone.
If you want more details I am sorry to say I cannot provide them. When things involve me fixing my own technology, it is a lot of rapid-fire troubleshooting and I just go with what sticks without really memorizing what I did (so if I run into this issue again, I have to re-research).
Click to expand...
Click to collapse
Thanks! Finally Oden recognizes my phone
my amazing method
the same problem was with me 3-4 weeks ago...
follow the url-
dbloo dbloo dbloo dot autoroot dot chainfire dot eu
(i cant post the URL because the website is not allowing me.....understand and use the code)
1) choose your samsung model and download the recovery file
2) download and open odin on a dekstop
3) connect your device to the dekstop
4) press the volume down, home button and power button together till the screen changes
5) press the volume down button again
6) odin will show the message "attatched or connected"
7) click pda
8) attatch the file you downloaded
9) your device will be fixed and will be restarted
ur welcome
hai i am stuck at download mode with message as could not normal boot how to fix it
Hi
I unsuccessfully tried to root my YP-GI1CW using the process described at:
http://forum.xda-developers.com/showthread.php?t=1852546
I realise now it was the wrong process but unfortunately my player now has the "firmware upgrade encountered an issue".
I would like to recover if if possible but Although Odin can detect the device when attached, adb does not see any devices. Im not sure if I can make the damage any worse but would appreciate any help in recovering my device.
Thanks - xdanewbie
Did you make a backup of your ROM first off
Second: can you get in recovery
Third: if you want to superuser try superoneclick to root your device
Fourth:you have to be careful not to do things like that it's very dangerous to the device.
Sent from my YP-G70 using XDA Free mobile app
troy5890 said:
Did you make a backup of your ROM first off
Second: can you get in recovery
Third: if you want to superuser try superoneclick to root your device
Fourth:you have to be careful not to do things like that it's very dangerous to the device.
Sent from my YP-G70 using XDA Free mobile app
Click to expand...
Click to collapse
Hi
No, i didnt make a backup
I can start the media player with power-vol down-home and i get into the download screen but when i continue i then get the "firmware upgrade encountered error" message.
I definitely will be more careful now. is my devicce broken forever ?
Thanks - xdanewbie2014
xdanewbie2014 said:
Hi
I unsuccessfully tried to root my YP-GI1CW using the process described at:
http://forum.xda-developers.com/showthread.php?t=1852546
I realise now it was the wrong process but unfortunately my player now has the "firmware upgrade encountered an issue".
I would like to recover if if possible but Although Odin can detect the device when attached, adb does not see any devices. Im not sure if I can make the damage any worse but would appreciate any help in recovering my device.
Thanks - xdanewbie
Click to expand...
Click to collapse
As long as you can access download mode you should be able to get the device working again. I'd try heimdall (get suite 1.3 I believe) instead of Odin. It usually works better. You just need to find the Odin stock package for your device.
Sent from my YP-G1 using XDA Free mobile app
xdanewbie2014 said:
Hi
No, i didnt make a backup
I can start the media player with power-vol down-home and i get into the download screen but when i continue i then get the "firmware upgrade encountered error" message.
I definitely will be more careful now. is my devicce broken forever ?
Thanks - xdanewbie2014
Click to expand...
Click to collapse
No you didn't break your device forever. All you have to do is install your stock rim that suites your device and flash it with hemidall
Sent from my YP-G70 using XDA Free mobile app
Hi
I have found all the files I need here
http://forum.xda-developers.com/showthread.php?t=1531850
BUT I cant get the device into download mode. I start the device with Powe+vold down+home key and it asks me to press vol up to continue. However, when I press vol up I get the "firmware upgrade encountered an issue" error.
Boy am i learning now
Thanks - xdanewbie
Hi
I realised that Heimdall was failing as it was using the standard sansung USB drivers. Im now trying to figure out how to stop those drivers from loading every time i plug in the YP-GI1.
In the meantime, I used ODIN to try and load the PIT and PDA rom image.
It appears to work but then the write fails (see attachment)
Any help would be appreciated - Thanks
.
xdanewbie2014 said:
Hi
I realised that Heimdall was failing as it was using the standard sansung USB drivers. Im now trying to figure out how to stop those drivers from loading every time i plug in the YP-GI1.
In the meantime, I used ODIN to try and load the PIT and PDA rom image.
It appears to work but then the write fails (see attachment)
Any help would be appreciated - Thanks
.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=51762484 on heimdall did you follow my instructions on "----Installing device's driver for Hemidall----"? That's how I got it to install the correct drivers. Note: This is for restoring a YP-G1 (Galaxy Player 4.0) so don't use that restore file.
Is This Progress ?
obscuresword said:
http://forum.xda-developers.com/showthread.php?p=51762484 on heimdall did you follow my instructions on "----Installing device's driver for Hemidall----"? That's how I got it to install the correct drivers. Note: This is for restoring a YP-G1 (Galaxy Player 4.0) so don't use that restore file.
Click to expand...
Click to collapse
Hi
I couldnt get zdiag to pick up any driver, the word samsung_android briefly appears when i connect the usb cable to the device but by the time standard usb driver load, the zdiag drop down window is blank.
However, I tried Odin 3.0.7 with the pit and rom files and the device did flash sucessfully. Now the device boots and says sansung galaxy SII GT-9100G and a yellow triangle and stops there. I can boot the device into download mode but I cannot seem to get into recovery mode by holding power-home-vol+
Im not even sure if this is progress or whether I have used the wrong rom (which i doubt because it clearly stated it was for the galaxy 4.2 international version YP-GI1CW
I have taken a screenshot of the successful flash.
Thanks for talking the time to help me. Im a little stuck now as I dont know what to do next.
Cheers -xdanewbie
xdanewbie2014 said:
Hi
I couldnt get zdiag to pick up any driver, the word samsung_android briefly appears when i connect the usb cable to the device but by the time standard usb driver load, the zdiag drop down window is blank.
However, I tried Odin 3.0.7 with the pit and rom files and the device did flash sucessfully. Now the device boots and says sansung galaxy SII GT-9100G and a yellow triangle and stops there. I can boot the device into download mode but I cannot seem to get into recovery mode by holding power-home-vol+
Im not even sure if this is progress or whether I have used the wrong rom (which i doubt because it clearly stated it was for the galaxy 4.2 international version YP-GI1CW
I have taken a screenshot of the successful flash.
Thanks for talking the time to help me. Im a little stuck now as I dont know what to do next.
Cheers -xdanewbie
Click to expand...
Click to collapse
First you would need to take the right package for your device as I explicitly written it was made for YP-G1 only. (See the YP-G1CW) you would need in that case, something so you can fully restore your device. Maybe you can find it in the 4.2 general forum.
And even so you said it was made for the 4.2, the file says it's for YP-G1 a.k.a the 4.0.
Envoyé de mon Nexus 7 en utilisant Tapatalk
xdanewbie2014 said:
Hi
I couldnt get zdiag to pick up any driver, the word samsung_android briefly appears when i connect the usb cable to the device but by the time standard usb driver load, the zdiag drop down window is blank.
However, I tried Odin 3.0.7 with the pit and rom files and the device did flash sucessfully. Now the device boots and says sansung galaxy SII GT-9100G and a yellow triangle and stops there. I can boot the device into download mode but I cannot seem to get into recovery mode by holding power-home-vol+
Im not even sure if this is progress or whether I have used the wrong rom (which i doubt because it clearly stated it was for the galaxy 4.2 international version YP-GI1CW
I have taken a screenshot of the successful flash.
Thanks for talking the time to help me. Im a little stuck now as I dont know what to do next.
Cheers -xdanewbie
Click to expand...
Click to collapse
Did you try getting the 4.2 drivers from Samsung Kies and then using zadig? Also it seems like you're using an S2 restore, which isn't for your device. The comment I linked you to is for restoring a YP-G1 so you would have to get the right heimdall package for your 4.2 like zaclimon said.
Sent from my YP-G1 using XDA Free mobile app
zaclimon said:
First you would need to take the right package for your device as I explicitly written it was made for YP-G1 only. (See the YP-G1CW) you would need in that case, something so you can fully restore your device. Maybe you can find it in the 4.2 general forum.
And even so you said it was made for the 4.2, the file says it's for YP-G1 a.k.a the 4.0.
Envoyé de mon Nexus 7 en utilisant Tapatalk
Click to expand...
Click to collapse
Yep, Im officially an idiot. I did not even know the firmware was for the 4.0. I had missed the different between the YP-G1 and theYP-GI1
I have now found the correct rom here
http://forum.xda-developers.com/showthread.php?t=1884071
However, i have tried every version of Odin from 1.3 to 3.0.9 and they all fail to complete the Nand write (see below)
I have tried 2 pc's with 2 cables and all versions of Odin.
Any other pointers would be appreciated.
Thanks - xdanewbie
xdanewbie2014 said:
Yep, Im officially an idiot. I did not even know the firmware was for the 4.0. I had missed the different between the YP-G1 and theYP-GI1
I have now found the correct rom here
http://forum.xda-developers.com/showthread.php?t=1884071
However, i have tried every version of Odin from 1.3 to 3.0.9 and they all fail to complete the Nand write (see below)
I have tried 2 pc's with 2 cables and all versions of Odin.
Any other pointers would be appreciated.
Thanks - xdanewbie
Click to expand...
Click to collapse
I think you are going to have to use Heimdall for this. Try and get the drivers installed for this device, and see if zadig picks it up.
Day 4
Hi
OK. It appears that I can either setup my PC to Use Heimdall (which requres the samsung KIES drivers NOT to be installed) or Odin (which requires the drivers to be installed)
I have now deinstalled the kies usb drivers, run drivecleanup to remove the old usb entries and downloaded Heimdall 1.3.1. When I run zdiag it picks up the samsung usb driver and install the heimdall driver.
Im trying now to use the rootted rom available (which seems ok for odin) available at
http://forum.xda-developers.com/showthread.php?t=1884071
However, if I try to use it with Heimdall 1.3.1 it says missing firmware.xml
I have a friends galaxy 4.2 also. Is there any way to extract the required info from that device or can anyone give pointers to where i might find a heimdall package for the YP-GI1CWXEU
Thanks - xdanewbie
In my opinion...heimdall is a little more advanced as opposed to odin. I suggest you stick to Odin...the flash might have failed because you flashed the wrong files before. From your thread...I believe you will get the PIT file...flash that and then flash the ROM and if you want, the kernel.
EDIT: I tested Odin v3.04...and it works fine with my YP-GI1.
Sent from my XT760
drakonizer said:
In my opinion...heimdall is a little more advanced as opposed to odin. I suggest you stick to Odin...the flash might have failed because you flashed the wrong files before. From your thread...I believe you will get the PIT file...flash that and then flash the ROM and if you want, the kernel.
EDIT: I tested Odin v3.04...and it works fine with my YP-GI1.
Sent from my XT760
Click to expand...
Click to collapse
Hi
Thanks for your help. I have the rom from the link above but where would i get the pit file from ?
Thanks - xdanewbie
Update: I found the PIT file for the international 4.2 version. I used odin 3.04 with the pit file followed by the rom and my device its now working again Is there any way now to get rid of the Salaxy S2 logo ?
Either way, many thanks to all who helped and I hope this thread helps those who were as silly as I was !
Thanks - xdanewbie
To remove the yellow triangle, you need to use a USB JIG, google the term to know what I mean. There are no other ways to do the same.
Sent from my XT760
drakonizer said:
To remove the yellow triangle, you need to use a USB JIG, google the term to know what I mean. There are no other ways to do the same.
Sent from my XT760
Click to expand...
Click to collapse
Hi I used this usb jig which not nly removed the yellow triangle but thegalaxy S2 logo as well. My player now looks exactly like it did before.
http://www.ebay.co.uk/itm/Micro-USB...UK_Mobiles_Accessories_RL&hash=item4ab688d076
PS: For those who may be interested, 4.2 case seem very expensive. I purchased this (whch is for a galaxy S2) and its a perfect fit but you need to
extended the button holes with a dremel.
http://www.ebay.co.uk/itm/Luxury-Ge...lePhonesCasesPouches&var=&hash=item48626b4b8c
Many thanks to all those who have helped a newbie learn a little bit more.
xdanewbie
Okay I have seen various requests so I decided to hook it up, I had to pay for these but here ya go. I have full firmware for lollipop or kitakat and you can get them from the following links to my google drive.
https://drive.google.com/folderview?id=0BxcLJPerShJ_ZDJrNV9fRVBSdU0&usp=sharing
Within you will see two folders you can pick either kitkat or lollipop and to do a full flash download the files starting with ALL then flash with odin by placing in the pda section. The others shouldnt even be needed if your looking just to fully flash the device use the ones that start with the label ALL. Enjoy. Wish someone could get the bootloader unlocked for this variant. If their are any other variants that need firmware let me know ill see what i can do.
I am curious could i perhaps flash the csc for tmobile then maybe my dev settings let me unlock bootloader like tmobile variant? I am not certain but I feel like it could possibly
Any luck with that ? ? I bought this phone on Valentines Day with android 5.1.1. The first thing I did was download Your stock firmwares cuz I knew it was gonna be a start of another journey with another Samsung device with lil to no development for it. Been doing research daily since then, You've been the most helpful & informative for Our cricket variant of the Grand Prime.
two559 said:
Any luck with that ? ? I bought this phone on Valentines Day with android 5.1.1. The first thing I did was download Your stock firmwares cuz I knew it was gonna be a start of another journey with another Samsung device with lil to no development for it. Been doing research daily since then, You've been the most helpful & informative for Our cricket variant of the Grand Prime.
Click to expand...
Click to collapse
Ya I am working on a few things but, honestly its going to be tough if I do happen to figure out a way for custom recovery xda forums will know first.
Helllo
I have a G530AZ, Itried to flash it with odin and it bricked. The phone doesn't turn on...not even in download mode....What can I do??. Can anyone help me...
edyrod84 said:
I have a G530AZ, Itried to flash it with odin and it bricked. The phone doesn't turn on...not even in download mode....What can I do??. Can anyone help me...
Click to expand...
Click to collapse
If I doesn't turn on at all. Then it's bricked. To make sure. Switch the battery or charge it. If it still doesn't turn on there is nothing you can do. But if you can get into Odin and download mode. There is hope and I have the files you'll need to salvage it.
Has anyone had any luck rooting this damn SM-G530AZ (5.1.1) ?? I've tried numerous methods and suggestions but so far this thing just won't give in....
EvilDoer360 said:
Has anyone had any luck rooting this damn SM-G530AZ (5.1.1) ?? I've tried numerous methods and suggestions but so far this thing just won't give in....
Click to expand...
Click to collapse
I rooted mine a while back, do you still need assistance?
i need some help, is there any custom recovery i can install for this phone?, cause i wanted to install the rom in this thread with flashify but i can't do it: http://forum.xda-developers.com/gran...285mb-t3415560
Layman instructions?
I just want to root my phone so that I can save whole apps on my sd card to free up so much space.
I'm just a layman though and have no idea what's being talked about or what the files are that you're sharing. I would really appreciate step by step layman instruction. Thank you so much if you can do that!
toxinburn said:
Okay I have seen various requests so I decided to hook it up, I had to pay for these but here ya go. I have full firmware for lollipop or kitakat and you can get them from the following links to my google drive.
https://drive.google.com/folderview?id=0BxcLJPerShJ_ZDJrNV9fRVBSdU0&usp=sharing
Within you will see two folders you can pick either kitkat or lollipop and to do a full flash download the files starting with ALL then flash with odin by placing in the pda section. The others shouldnt even be needed if your looking just to fully flash the device use the ones that start with the label ALL. Enjoy. Wish someone could get the bootloader unlocked for this variant. If their are any other variants that need firmware let me know ill see what i can do.
Click to expand...
Click to collapse
Hey, do you have a nandroid backup of your device (sm-g530az) that you could give me? My Samsung is dead, odin don?t recognize my device in download mode, only boot in recovery, and I can flash it with cwm. Please, you could help me?
VickMadrid said:
Hey, do you have a nandroid backup of your device (sm-g530az) that you could give me? My Samsung is dead, odin don?t recognize my device in download mode, only boot in recovery, and I can flash it with cwm. Please, you could help me?
Click to expand...
Click to collapse
their is no bootloader unlock or custom recovery for the 530az that i am aware of, so i never could make a nandroid backup. If you know of a way to actually use a custom recovery etc on the 530az I would make you a backup.
toxinburn said:
their is no bootloader unlock or custom recovery for the 530az that i am aware of, so i never could make a nandroid backup. If you know of a way to actually use a custom recovery etc on the 530az I would make you a backup.
Click to expand...
Click to collapse
That´s the history. I recieve the samsung (sm-g530az), but the smartphone don´t connect to wifi, when you choose the network only appear "Saved, Protected". No matter how much times you select the network, always appear the same thing and the device do nothing. Well, i thinked in that moment in change the firmware. I read in this forum a possible solution, that solution says "Download the Samsung Kies, then connect your device and select -upgrade your device-. Type your model and S/N, and Kies does the rest". I did it, everything seemed fine, until the process stopped. And an error message appears that says "Disconnect the phone and retire the battery, then turn on + ^ + home to start the emergency recovery". I did it all, but when i connect it, my pc, odin and kies don´t recognize it, my Samsung died. I put the phone in download mode and nothing happens. I reinstall the driver, kies and everything and odin at last recognize my device. Then I dowloaded "Philiz Touch Recovery" and I could flash it with odin. After all, I clean my device and prepare it for a custom rom. I installed it "cyanogenmod 12.1 unofficial", but when restart the device, it doesn't enter to the system, only boot in recovery or bootloader. But my pc don´t recognize my device in download mode, and I can´t flash it with odin. So I need the backup to restore my device.
Try to install "Philiz Touch Recovery" with Odin. I did it, and works for me. When I recieved the samsung, i don´t unlocked the device and I could flash the CWM. Thanks for your response
VickMadrid said:
That´s the history. I recieve the samsung (sm-g530az), but the smartphone don´t connect to wifi, when you choose the network only appear "Saved, Protected". No matter how much times you select the network, always appear the same thing and the device do nothing. Well, i thinked in that moment in change the firmware. I read in this forum a possible solution, that solution says "Download the Samsung Kies, then connect your device and select -upgrade your device-. Type your model and S/N, and Kies does the rest". I did it, everything seemed fine, until the process stopped. And an error message appears that says "Disconnect the phone and retire the battery, then turn on + ^ + home to start the emergency recovery". I did it all, but when i connect it, my pc, odin and kies don´t recognize it, my Samsung died. I put the phone in download mode and nothing happens. I reinstall the driver, kies and everything and odin at last recognize my device. Then I dowloaded "Philiz Touch Recovery" and I could flash it with odin. After all, I clean my device and prepare it for a custom rom. I installed it "cyanogenmod 12.1 unofficial", but when restart the device, it doesn't enter to the system, only boot in recovery or bootloader. But my pc don´t recognize my device in download mode, and I can´t flash it with odin. So I need the backup to restore my device.
Try to install "Philiz Touch Recovery" with Odin. I did it, and works for me. When I recieved the samsung, i don´t unlocked the device and I could flash the CWM. Thanks for your response
Click to expand...
Click to collapse
ya i think you messed up royally, their is no working philz or cwm for the 530AZ at all because the bootloader is locked soooo i dont see how you ever flashed it with that in the first place, but if you indeed were able to then it looks like you have a soft brick of sorts since the bootloader is locked on that model, their is firmware but you for some reason are unable to flash with odin so sadly I am not sure what else you could do other than maybe see if it is recognized on other usb ports or computer also check your device manager in windows and check and see if the usb device is listed if it shows a yellow exclamation or unknown device then manually update the driver for the unknown device as an android device
VickMadrid said:
Hey, do you have a nandroid backup of your device (sm-g530az) that you could give me? My Samsung is dead, odin don?t recognize my device in download mode, only boot in recovery, and I can flash it with cwm. Please, you could help me?
Click to expand...
Click to collapse
Since Odin won't recognize it
Give this a shot
http://forum.xda-developers.com/grand-prime/development/fix-g530-debrick-img-guide-to-make-t3422115
[Edit]didn't realize that comment was so old xD [/Edit]
Help!!
Autolounge said:
I rooted mine a while back, do you still need assistance?
Click to expand...
Click to collapse
I do! I have the 5.1.1 530AZ and no method for has worked, please let me know what you did.
benash2010 said:
I do! I have the 5.1.1 530AZ and no method for has worked, please let me know what you did.
Click to expand...
Click to collapse
That is the exact model I have so this should work! Use KingRoot but the desktop variant. And if that doesn't work use KingRoot, again the desktop variant. Let me know how it goes!
VickMadrid said:
That´s the history. I recieve the samsung (sm-g530az), but the smartphone don´t connect to wifi, when you choose the network only appear "Saved, Protected". No matter how much times you select the network, always appear the same thing and the device do nothing. Well, i thinked in that moment in change the firmware. I read in this forum a possible solution, that solution says "Download the Samsung Kies, then connect your device and select -upgrade your device-. Type your model and S/N, and Kies does the rest". I did it, everything seemed fine, until the process stopped. And an error message appears that says "Disconnect the phone and retire the battery, then turn on + ^ + home to start the emergency recovery". I did it all, but when i connect it, my pc, odin and kies don´t recognize it, my Samsung died. I put the phone in download mode and nothing happens. I reinstall the driver, kies and everything and odin at last recognize my device. Then I dowloaded "Philiz Touch Recovery" and I could flash it with odin. After all, I clean my device and prepare it for a custom rom. I installed it "cyanogenmod 12.1 unofficial", but when restart the device, it doesn't enter to the system, only boot in recovery or bootloader. But my pc don´t recognize my device in download mode, and I can´t flash it with odin. So I need the backup to restore my device.
Try to install "Philiz Touch Recovery" with Odin. I did it, and works for me. When I recieved the samsung, i don´t unlocked the device and I could flash the CWM. Thanks for your response
Click to expand...
Click to collapse
Hello, I know is late. Is already 2017 happy new year. But i was looking the post and reading the thread. I'm looking this information to try on my friend phone that want to root. Anyway. I maybe have a solution to fix the bootloop. since you went to philz recovery. There is a bug with philz recovery. If im correct. But i got it fixed with some zip file and using command on that flash. If you still need this solution let me know. I can post the zip file and step by step of the command.
Let me know
apk
Sorry for the file "CROM_Service.apk" for what?
Hey I need that!
Kangrito said:
Hello, I know is late. Is already 2017 happy new year. But i was looking the post and reading the thread. I'm looking this information to try on my friend phone that want to root. Anyway. I maybe have a solution to fix the bootloop. since you went to philz recovery. There is a bug with philz recovery. If im correct. But i got it fixed with some zip file and using command on that flash. If you still need this solution let me know. I can post the zip file and step by step of the command./
Let me know
Click to expand...
Click to collapse
HEY I REALLY NEED THAT!
I don't have the actual CWM on my phone yet. I just got it today. I already have it rooted, deodexed, and debloated(somewhat).
I was able to root it using kingroot. I'm still working for a way to replace the newest kingroot(5.1.0) with SuperSU.
But my question is does it actually work? Have you flashed the tar with odin and fix the code in it with commands.
Just reading your post gives me chills honestly. I like doing things as soon as I can! I'm a phoneaholic.
Greetings all,
I am a real noob and have recently taken to playing with my android devices.
Unfortunately I am in a predicament with my old S3 I9300.
I really screwed up and failed to make a Nandroid back up when using TWRP to flash Cynagenmod 13, after following the correct procedure on my other I9300 and successfully flashing it I became cocky and made the fatal error of not having a back up. A bit of back story but perhaps unrelated it was also suffering the old "Failed to Mount EFS" message which I have recently learnt to fix on my Old Old I9100 S2 using ADB.
After flasing It was in a Cynagenmod boot loop and was not able to be recognized by my pc via download mode or recovery, so was unable to use Odin, Kies or even ADB.
After experiencing USB issues with Cynagenmod 13 on my other I9300 when the flash was successful, I decided that perhaps it would be better to flash Android Revolution as the USB connections just seem to work better. After the flash seemed to be successful and the Samsung Logo just hung around and never booted.
I played with it all day, trying to get Kies, ADB and Odin to recognize it to no avail, (I tried every little trick on Google, reinstall drivers, restart pc , restart device, plug unplug, play with the buttons and the battery etc.....) the thing is, is that Odin would recognize it in bootloop.
After growing tired of this not working, for some stupid reason I decided to flash CWM over TWRP via MicroSD, i just thought maybe I could get ADB to work or something. Anyway the flash worked and I continued to try ADB, KIES and ODIN but nothing.
To make matters worse currently when I try to go to Recovery CWM is now looping (I'm hoping its a passing phase), so with recovery gone my phone is restricted to Download mode. I really think my last chance is to get download mode communicating with Kies to get the Firmware.
Feeling frustrated and about throw my phone on the recycling heap after googling and reading so many XDA threads I decided to reach out and ask for any help or suggestions in finding a way to get my phone recognized in Download Mode.
I thank you for your time in reading this post and look forward to hearing any advice.
Cheers.
muddled said:
Greetings all,
I am a real noob and have recently taken to playing with my android devices.
Unfortunately I am in a predicament with my old S3 I9300.
I really screwed up and failed to make a Nandroid back up when using TWRP to flash Cynagenmod 13, after following the correct procedure on my other I9300 and successfully flashing it I became cocky and made the fatal error of not having a back up. A bit of back story but perhaps unrelated it was also suffering the old "Failed to Mount EFS" message which I have recently learnt to fix on my Old Old I9100 S2 using ADB.
After flasing It was in a Cynagenmod boot loop and was not able to be recognized by my pc via download mode or recovery, so was unable to use Odin, Kies or even ADB.
After experiencing USB issues with Cynagenmod 13 on my other I9300 when the flash was successful, I decided that perhaps it would be better to flash Android Revolution as the USB connections just seem to work better. After the flash seemed to be successful and the Samsung Logo just hung around and never booted.
I played with it all day, trying to get Kies, ADB and Odin to recognize it to no avail, (I tried every little trick on Google, reinstall drivers, restart pc , restart device, plug unplug, play with the buttons and the battery etc.....) the thing is, is that Odin would recognize it in bootloop.
After growing tired of this not working, for some stupid reason I decided to flash CWM over TWRP via MicroSD, i just thought maybe I could get ADB to work or something. Anyway the flash worked and I continued to try ADB, KIES and ODIN but nothing.
To make matters worse currently when I try to go to Recovery CWM is now looping (I'm hoping its a passing phase), so with recovery gone my phone is restricted to Download mode. I really think my last chance is to get download mode communicating with Kies to get the Firmware.
Feeling frustrated and about throw my phone on the recycling heap after googling and reading so many XDA threads I decided to reach out and ask for any help or suggestions in finding a way to get my phone recognized in Download Mode.
I thank you for your time in reading this post and look forward to hearing any advice.
Cheers.
Click to expand...
Click to collapse
Hey Mate,
Firstly we all are noobs here helping each other, secondly from my experience of S3, it is such a device that under any condition, if your hardware is intact, you can recover your phone from almost anything, so yeah you might have a solution to your problem.
Coming to the problem at hand, i had the same thing happen to my S3, (only twrp logo showed, couldn't access recovery, no ROM, only download mode available) the way i fixed it was using odin, now i know you say that odin is not recognizing your device, the thing is firstly Kies is useless in this situation acc. to me, it only works stock ROM and that too with difficulty, what i would say is go here - http://developer.samsung.com/technical-doc/view.do?v=T000000117
and then install the drivers to your PC, next up download the official firmware from sammobile or any other site (careful of the version you are using), now put the phone in download mod, start odin and then connect your phone. Now, hopefully odin will recognize your phone and you can flash the official firmware, also i would recommend to stay on the official firmware for like a week before returning to flashing again as i have noticed that constant flashing and wiping leads to not only errors like "unable to mount EFS" but also serious errors like "Unable to mount /system" or "Unable to mount /Data" ,which clearly sucks
Please try the method and tell me if it worked , if not we'l try something else but we sure as hell will get your device working again
If still not recognized then here is a suggestion :
Exit/uninstall from nokia/ovi suit.
Exit/uninstall bluestack. (if u r using it)
Update your drivers(phone specific)
Use correct odin version acc to ur phone
Sent from my Micromax E352 using XDA-Developers mobile app
I'm just gonna throw my 2 cents in too. I didn't read your whole thread as I'm in a slight rush right now.
But basically -
Can your PC recognise your phone when it's plugged into USB in Download Mode? If so, use ODIN to flash any stock firmware and you're back to square one (working, but stock) phone. Then go from there. Obviously try to flash the right firmware or you'll end up no further forward.
If it can't recognise it, try reinstalling the drivers, uninstalling the programs mentioned above and using another USB cable. My experience with my own S3 has shown potential wear with the USB port on the bottom of the phone presumably due to it's age and as a result it doesn't recognise many USB cables.
Regards