[Q] screen not working probably - HTC Desire X

hi the touch screen will not work probably it does work sometimes if i press hard & move my finger around the colours on the lcd are fine is this the case that the Touch Screen Digitizer is broken will like to know so i know what to replace thanks in advance

Related

Tapping screen causes Screen flicker!

When I tap the bottom portion of my screen using stylus the screen turns to different colors.(Also happens when pressing HOME and LEFT buttons sometimes).
So my question is do I need LCD or just digitizer replaced? I did notice the Digitizer is a little raised.
Replacing it is not a option
I don't know if this helps, but I had the exact same problem for about a week, then it seemed to work ok except on pressure at the bottom of the screen, the entire display would go off color.
I took it into the sprint store and they replaced the entire top sliding portion of the phone. I was hoping to get a replacement TP2 but at least its fixed.... Now maybe the new NFSFAN rom will keep me happy for a while..

[Q] Galaxy s2 screen repair fail - buttons dont work now

Good Day folks, here is the long and short of it.
Galaxy s 2 fell and the screen broke
I bought a new screen
Replaced the screen BUT two big problems occured.
1. The screen appears to have less colours than my original screen
2. NONE OF THE SOFT KEYS WORK, HOME, MENU AND BACK DO NOT WORK.
Number 2. is the big problem. Does anyone have any idea how these buttons work?
Even when I press the buttons directly with my fingers with the buttons off they still do not work.
Im baffled. Please help.
I also have attached pictures of the button area
It happened to me, I removed the screen, I replaced from beginning and it worked...
Hi Collado, do the white things behind the buttons have any electronic functionality or are those just things to make it stick?
To all future readers. I found out what the problem was. Basically,
The home, back and menu keys are all connected to a single ribbon. It appears there is a tiny piece, connected via the back key. That was torn while i was ripping off the the screen and digitizer.
See the picture attached
How much did you pay for your replacement screen and where did you get it. My digitizer is broken due to a drop. My front glass is perfect but the digitizer is completey shot. How difficult was this project?
Hi Johnboy
I cant remember the price of the digitizer offhand but make a check on ebay.. that is where i got it.
Difficulty is high as you need the minature tool set to do this effectively and a gentle touch.
However, it still appears as though the screen I bought has less colours.
Sorry to jump in and unintended hijack
I also dropped my S2 and cracked the screen, and after checking around dropped it in to the Geek Squad at CPW. Who duly replaced the screen and digitizer for £80. Only problem is the screen seems less bright and if moved off the central viewing angle the screen dims, as if it wasa standard lcd and not the orginal AMOLED screen. Does anyone know if they make lesser screens or was it fitted badly.
Any advice greatly appreciated.
DM.
I would go back with it and complain.If you dont get satisfaction then do an impression of the guy that goes into the pizza shop in "rise of the foot-soldier" film.
Sent from my GT-I9100 using xda premium

[Q] Screen not responding after cleaning it

I've cleaned the x10mp with wet wipes which contained a bit of alcohol, to remove fingerprints & grime.
Now, there is a rectangular region in the middle of the screen where touching produces nothing. There are no dead pixels, as far as I can see, just touching there isn't picked up by the phone.
Pressing anywhere else on the screen works fine.
Any suggestions?.
TIA
i think it cant be repaired if you really want to fix it you should by a new screen
sounds like hardware problem. Send it to service. maybe they can do something. or, they will tell u to change the touch screen...
gl

[Q] Screen replacement

Hey guys, today I dropped my HOX+ (International), not for the first time, but this time the glass shattered.
Ofcourse I don't want to spend buckets for some professionals, I will try to do it on my own.
Only the glass broke, touch is still fine. Only thing I noticed are 2 little holes in the glass where
the colors seem a little bit orange. Now my questions are:
1.Is it possible to only swap the digitizer (glass) or is it too hard glued together with the LCD panel?
2.Are the orange spots (you can barely see them) a problem or the LCD panel or will they
be fixed with a new digitizer?
3.Which HOX models have the same screen as the X+, I heard the international HOX has the same,
is that true?
4.Are the LEDs of the HOX+ menu buttons red or is it just the digitizer? White buttons would look great, too.
5.Do I really need replacementkits for like 60 euro with tools and all that stuff or can I do it with my own tools
at home? My father is not a professional but he already fixed all kinds of electronic things, I got his help.
6.If replacing only the digitizer is possible should I do it or would u recommend to replace the whole screen,
that would also prevent dust in the screen.
7.In many videos they didn't shut down the phone so they could test whether it worked, is that recommended or can I break smth?
That's all I had to ask, tell me which mistakes you did or some tips etc.
Hope I get some fast responses, so I know which things to order, thanks in advance
Tazmaniiac said:
Hey guys, today I dropped my HOX+ (International), not for the first time, but this time the glass shattered.
Ofcourse I don't want to spend buckets for some professionals, I will try to do it on my own.
Only the glass broke, touch is still fine. Only thing I noticed are 2 little holes in the glass where
the colors seem a little bit orange. Now my questions are:
1.Is it possible to only swap the digitizer (glass) or is it too hard glued together with the LCD panel?
2.Are the orange spots (you can barely see them) a problem or the LCD panel or will they
be fixed with a new digitizer?
3.Which HOX models have the same screen as the X+, I heard the international HOX has the same,
is that true?
4.Are the LEDs of the HOX+ menu buttons red or is it just the digitizer? White buttons would look great, too.
5.Do I really need replacementkits for like 60 euro with tools and all that stuff or can I do it with my own tools
at home? My father is not a professional but he already fixed all kinds of electronic things, I got his help.
6.If replacing only the digitizer is possible should I do it or would u recommend to replace the whole screen,
that would also prevent dust in the screen.
7.In many videos they didn't shut down the phone so they could test whether it worked, is that recommended or can I break smth?
That's all I had to ask, tell me which mistakes you did or some tips etc.
Hope I get some fast responses, so I know which things to order, thanks in advance
Click to expand...
Click to collapse
first of all sorry for the screen.
1 . you can't change the glass only because its one part at all. like the glass,touch panel and the LCD are the same piece its too hard to separate them unless you have a IR Oven. so try the whole screen replacement. the international HOX screen is ok but the capacitive buttons will be white not red.
ps:don't try to open the chase with your own unless you know what you are doing . cuz i opened mine for like 20 times and every time i was breaking something in it. Mostly the power switch flex is real easy to be broken. good luck with that.
ps2: im suggesting you to buy the original spare of the hox+ screen and replace with that. you can do it with the box one but I'm not very sure the screen voltages are the same or compatible totally..
peace :angel:
So I am back again:
I took a new One X Plus Screen and built it in the phone..
I can turn it on, my PC detects the device, menu buttons are glowing. Now 4 problems:
-LCD is not working (digitizer works fine, I tested it with swipe to wake)
-vibrator thing is not working
-speakers not working
-menu button LEDs are glowing, but u can't see the buttons itself glow, only the LEDs are glowing
I am pretty sure that everything is plugged in how it should be done, any ideas?
Don't have a phone right now so fast help would be appreciated, thanks in advance.
Edit:
-vibrator thing is actually working, it was just blocked by something
-Menu buttons can't glow because there is something between LEDs and the screen, gonna fix that later
-speakers can't work because they are in the housing, sry for that mistake
Now the only problem left is the lcd, i am going to check again whether the lcd cable
is connected or not. If you have any ideas for other reasons why the lcd could not wok
please tell me.
Another question: under the menu buttons of my old screen were 3 transparent plastic pieces,
at first I thought it were the leds, but they are actually nothing electrical, just plastic pieces
glued on the screen. What are they for, do I have to keep them?

newly installed touch screen digitizer does not respond to touches.

Hi,
I cracked the screen on the Sony Xperia Z ultra. I bought an LCD screen and touch screen separately. I have installed both the lcd and the touch screen digitizer very carefully and correctly.
The lcd screen works fine however I cannot get the touch screen to work. There is no response to touches. I have not bonded them together or placed any tape between them. Is it possible the touch screen is faulty or does it have to be bonded to the lcd screen? What I am missing here.
Thanks,
Rob
hello, I have the exact same problem, have you found a fix?
Solved:
rob54321 said:
Hi,
I cracked the screen on the Sony Xperia Z ultra. I bought an LCD screen and touch screen separately. I have installed both the lcd and the touch screen digitizer very carefully and correctly.
The lcd screen works fine however I cannot get the touch screen to work. There is no response to touches. I have not bonded them together or placed any tape between them. Is it possible the touch screen is faulty or does it have to be bonded to the lcd screen? What I am missing here.
Thanks,
Rob
Click to expand...
Click to collapse
Hi after trying everything with hardware and running out of options I decided to flash the stock rom again just to see what happens. When I booted everything worked. The touch screen behaves normally now. I guess some software must have been corrupted. It may not be necessary to flash the rom again, it may just require a factory reset. I didn't try this but it may suffice.
I hope this helps someone.
Rob

Categories

Resources