Stuck in Philz Touch 4 Recovery - Galaxy S III Q&A, Help & Troubleshooting

Hello guys!
I tried to update the latest nightly on my phone (the last one was from July 2013, so I think it was still CM 10.1) with the CM Installer and rebooted.
Unfortunately I got an error message while in the update screen with the green Android figure and now I am stuck in Philz Touch 4 Recovery menu.
I already tried a factory reset, but I always end up in this recovery menu after restart.
How can I make my phone working again?
I am grateful for any help!
thank you in advance

Sewing said:
Hello guys!
I tried to update the latest nightly on my phone (the last one was from July 2013, so I think it was still CM 10.1) with the CM Installer and rebooted.
Unfortunately I got an error message while in the update screen with the green Android figure and now I am stuck in Philz Touch 4 Recovery menu.
I already tried a factory reset, but I always end up in this recovery menu after restart.
How can I make my phone working again?
I am grateful for any help!
thank you in advance
Click to expand...
Click to collapse
Reflash the stock firmware and repeat steps again.

Related

[Q] SGT-P7500 3G Doesn't boot anymore -err:0x4

This morning as took my tablet the screen did not switch on, i tried to reboot then it stuck on bootanimation, then i tried to wipe; it still stuck on
bootanimation. Next I tried a complete wipe and installed a new Rom --> same Problem only goes to the bootanimation.
Then I tried to flash with odin, it tells me "complete write operation failed" and err:0x4. Nvflash isn't working too. So what can I do. I was on CM 10.1 nightly before, and evertything worked very well till this morning. I still can go to Download mode but twrp is not working anymore.
Thanks in advance in sorry about my poor english.
Regards.
Maybe the last edit will give you a hint:
http://forum.xda-developers.com/showthread.php?t=1276873
@dvb127 This morning the same happend to my Tablet. Could you find a way to fix it?
I have been running a CM-Version of january and switched to nightlies a couple of days ago. I can't remember anything else I changed
What I tried: flashed a new version of CWM (6.0.3.2) via ODIN and installed the january & newest CM via CWM. Both worked fine.
Still the same problem. When I boot the tablet it reboots several times and gets stuck in the CM bootanimation. Factoryreset and wiping /data causes a reboot.
NetZwerg said:
@dvb127 This morning the same happend to my Tablet. Could you find a way to fix it?
I have been running a CM-Version of january and switched to nightlies a couple of days ago. I can't remember anything else I changed
What I tried: flashed a new version of CWM (6.0.3.2) via ODIN and installed the january & newest CM via CWM. Both worked fine.
Still the same problem. When I boot the tablet it reboots several times and gets stuck in the CM bootanimation. Factoryreset and wiping /data causes a reboot.
Click to expand...
Click to collapse
I flashed a Stock Rom with Odin first, i had to too this in a win XP PC, because it didn't work in win8, rooted again, now I'm in cm again without any pproblems.
Hey, thanks a lot - worked for me as well

[Q] Stuck in Recovery Boot after updating TWRP, L710 d2spr

Hello,
I downloaded the latest TWRP through goo manager. All seemed ok with no issues noted.
I have/had Slimbean 4.3 and was going to update to 4.4.2 Slimkat but needed to update my recovery.
I downloaded and installed it through Goo Manager
After which I rebooted into recovery and now I'm stuck in the black screen bootloader "RECOVERY BOOTING..."
I tried to reboot and even remove the battery but no go past to where I am.
I have a galaxy s3 L710 d2spr
Any and all help to get out of this will greatly be appreciated.
Reivaj1803 said:
Hello,
I downloaded the latest TWRP through goo manager. All seemed ok with no issues noted.
I have/had Slimbean 4.3 and was going to update to 4.4.2 Slimkat but needed to update my recovery.
I downloaded and installed it through Goo Manager
After which I rebooted into recovery and now I'm stuck in the black screen bootloader "RECOVERY BOOTING..."
I tried to reboot and even remove the battery but no go past to where I am.
I have a galaxy s3 L710 d2spr
Any and all help to get out of this will greatly be appreciated.
Click to expand...
Click to collapse
Here is your first bit of help >> http://forum.xda-developers.com/galaxy-s3-sprint <<
Thanks for the redirection. :good:

HammerheadCAF on Google Nexus 5

Hi Guys, I am trying to install CM HammerheadCAF latest nightly build on my nexus 5.
So I flashed recovery TwrpCAF latest version and then flashed hammerheadCAF latest nightly build and i didn't get any error
But when I Selected boot from the TWRPCAF Screen, phone starts and doesn't go beyond a screen with the text "Google" and a unlocked lock logo at the bottom of the screen.
I am not sure what I am doing wrong or what am I missing. I have installed it several times with no luck. Please help. Thanks

[CM 13] Recovery didn't work, after trying to update phone too!

When I updated Cyanogenmod to CM13 my recovery stopped working (I turned on "update recovery with system"). I didn't can apply ANY updates from SD card and from PHONE STORAGE too.
To fix it I tried to update CM to 13 from 10-02-2016 to 13-02-2016. But... It didnt ANYTHING happened! It was only black screen. But now I can't turn on my phone! Recovery mode is not turning on too! I have only not working phone with not working recovery when it will turn on too!
I need my phone tomorrow, please, HELP ME! What can I do?!
Recovery: CM13 recovery.
It is not bootloop, I have:
BLACK SCREEN
After Samsung logo.
It is very important, does somebody know what to do?
I have new news:
After turning on I have samsung logo and for about one second Updating System message! Without loading bar . After it of course black screen!
I didn't do any backups of my phone, but I can wipe all data, but I NEED WORKING PHONE!
@tom790
Try flashing this kernel I attached with odin. Next try rebooting to recovery. If you get a working TWRP recovery, then flash the rom you want to use as normal. Please read this guide if you want to use CM13 and avoid common issues.
Same problem here after trying to update to the newest nightly (also with "update recovery with system" on in developer settings) I assume that this function isn't working correctly. The only alternative is as mentioned above - flash kernel+recovery with Odin and make changes afterwards.
I have same problem. I tried to install this kernel above with ODIN but no luck, after sucessful flash logo and black screen. Any other advice or tips? Is there any chance to recover some data from internal card?
And exactly the same issue here. Will try the workaround from the first answer by noppy22.
OK, succeeded. I used ODIN with the kernel tar file from noppy22, put the S2 into download mode (that was still possible, recovery mode couldn't be accessed), flashed the kernel. Phone rebooted automatically into recovery and started (continued?!) with the installation of CM 13.0. And here I realize the issue. The OTA was the nightly of CM 13.0 which I inadvertently chose to be flashed over the running CM 12.1. Bad idea!
Caveats: I see the yellow triangle now which didn't show up before. No problem for me - it's more than 4.5 years old. And there is still the error that "Google play service was terminated" which showed before I triggered the OTA update of CM 12.1.

"Firmware update" screen trying to boot into recovery and bootloader

Hey guys,
I recently tried to re-flash CM13 on my D620r, but can't boot into recovery anymore, where before it booted with no problem. I even flashed Xposed like a month ago and no problems occured. My TWRP is 2.8.7.0 from this thread: http://forum.xda-developers.com/g2-mini/development/recovery-twrp-2-8-3-0-recovery-lg-d620-t2990196
Any help appreciated, thanks!
Problem solved. Factory reset from system level made it after third time.

Categories

Resources