Good Morning People: I have an issue with my Razr XT910. I ve just installed Slimkat V 3.8 (and before 3.4, 3.2 and 3.1) and in all versions i lost signal after a few hours. The only way i have to get it back is rebooting my cell.
I did all the wipes, I delete the cellbroadcaster.apk but the result is the same.
Any ideas? Besides that, the rom is incredible...
Thanks for your help!
Try other rom and see if you have signal problem.
Same problem
I have the same problem on my XT912, I also did all of the wipes (multiple times) and I am still losing service. I have flashed a pacman and carbon rom to test and have not lost service with those roms. I am a n00b as far as contributing to tweaks for roms but hopefully I will come across something. I hope this info is helpful.
Gurrinho said:
Good Morning People: I have an issue with my Razr XT910. I ve just installed Slimkat V 3.8 (and before 3.4, 3.2 and 3.1) and in all versions i lost signal after a few hours. The only way i have to get it back is rebooting my cell.
I did all the wipes, I delete the cellbroadcaster.apk but the result is the same.
Any ideas? Besides that, the rom is incredible...
Thanks for your help!
Click to expand...
Click to collapse
GO IN PHONE SETTING AND YOU SEE BASEBAND VERSION,IF YOU SEE UNKNOW YOUR RADIO IS GONE...IF YOU SEE THIS JUST FLASH A NEW BASEBAND FROM HERE... http://forum.xda-developers.com/showthread.php?t=1863106
IF THIS DOSEN'T WORK,DOWNLOAD AND FLASH AGAIN THE ROM
HOPE I'VE HELP YOU
Related
Hi Sergei !
I use DSC from beginning. It is the best ROM.
I just wt to ask
Until now I already update .64b. I have no problem with all troubles such as wifi,reboot,camera...
Which kernel I should install? the original with upd0.64b or DSC_teamXX or GXkernel...
Bz i got confused about many of kernel
I need stability and long life battery for normal using.
Anyway thank a lot for the DSC rom from yr team
Appreciated that
Larry
For 0.64b I used the kernel that was provided. Prior to that I used GKernel 1.5, since I never had any luck with using the GXKernels on my device.
Good day to you!
Stable kernel is always included in our ROM.
We provide and test different kernels, but only tested and stable version goes into release.
First of all.....
Like many of us, we just wanted a solid/stable custom ROM and I couldn't be more grateful for the fine work Greg and _n0p_ are/have been doing.
I love DSC above the rest, but I too have the Wifi freezes, and have them with nearly all GB-based ROMs.
However, when I first went to GB from DJ_Steve, I didn't have Wifi issues. Unfortunately, everything else went wrong, so I searched for a better ROM. Ultimately, I installed Longhorn, with the BB and kernal. At that point, I started seeing Wifi troubles. After that point, every GB-based ROM gave me wifi freezes.
I've been following and installing the DSC updates as you release them, and each time, the freezes come back.
Each time, I go back and re-flash the GXkernal1.0, and all seems right. I may get a freeze on that kernal at some point, but I haven't had one yet. The other kernal updates gave me freezes within a few hours of installation.
Sorry for the tome, but suffice it to say, IMHO, GXkernal1.0 has been the stablest kernal for me.
Thank you. You gave a new idea.
Hi Sergei,
Good news!
I am using DSC0.64b+kernel 2.6.35-14-DSC-Team-Phoenix+ from yesterday until now. So far it is fantastic. I have no FC, no reboot, no prbl with wifi...
I were supprised why many people get wifi prbl.
Anyway thank u and yr team for DSC.
Yes, I have the DSC-Team-Phoenix kernal in right now. Installed this morning, got a wifi freeze a couple hours later, but battery too low to flash back to GXKernal1.0. So far so good on Phoenix. I'll reflash GXKernal1.0 later when/if I get another wifi freeze.
But yes, got wifi freeze on Phoenix too.
Hi _n0p_,
I saw in yr build.prop has 1 line:
#wifi.supplicant_scan_interval=120 instead of wifi.supplicant_scan_interval=120
might be it cause of wifi problem?
When I change that line, i have no problem at all with all yr DSC roms.
Sorry if that is wrong.
Larry
Good morning everyone
Seems to be that my GSII has serious issues running his stock rom (continuous reboots, not-working 3g etc.). I tried several factory resets, but nothing worked 100% . CM fixes some of my problems, but the only full-working custom rom is MIUI, that seems to be stable and very neat. Despite that I still prefer the custom rom (yes I'm probably insane), or a more traditional one like CM and I really would like to understand what kind of problems can generate such a massive amount of errors and reboots.
Could be a hardware problem? MIUI works fine, I can't explain why I still got problems with other ROMs.
Sorry for my bad English, thanks in advance
Without telling us the version of the stock rom you are using, we can never give you any answers.
I'm currently using
2.6.35.7-I9100XWKDD-CL161513 [email protected] #2 Kernel
Gingerbread.xwkj3 Build
That's not the original stock ROM, just one I found (here on xda I guess...)
Is there some kind of hardware-check I can run by myself, just for exclude manifacturing defects?
if you want to check to exclude hardware defects, u could go to the dialer and press *#0*# .. it will give u a list of tests which allows u to pinpoint any hardware defects ( if it exists) .... but if the problem is with the 3g, you could reflash your modem..
Initial problems were strictly connected with 3g's use, after a few hours of use i've noticed slowdowns using sms, then it started crashing and random rebooting. That's the same reason why I initially switched from original ROM to CM. I mean, I know that Samsung's ROM is not the best one at all, but I can't figure why it's so instable on my device.
fra beone said:
I'm currently using
2.6.35.7-I9100XWKDD-CL161513 [email protected] #2 Kernel
Gingerbread.xwkj3 Build
That's not the original stock ROM, just one I found (here on xda I guess...)
Is there some kind of hardware-check I can run by myself, just for exclude manifacturing defects?
Click to expand...
Click to collapse
As that the oldest stock rom try a newer one .
jje
Updating: now my GSII works with latest stable Cyanogen, except for the 3g that's still not working. Should I reflash modem, as suggested by roophz?
That old kernel is known to cause random reboots.
Update to a newer stock rom.
Sent from my GT-I9100 using Tapatalk
Update 2: I switched from the old stock rom to the latest cyanogen stable version, then to a newer stock rom and then back to MIUI again. Still no life signals from 3g.
How is that possible?
Dear all,
I noticed that my P7510 running on ICS 4.0.4 (XWLP5) has an unstable WiFi connection when the received WiFi signal strength is not maximum (2 or 3 out of 4 bars). Connection often disappears and when trying to reconnect to the WiFi network manually, the there is no response. Turning off / on Wifi on my Tab is no solution to the problem either. Even a full reboot does not always help. I updated from HC 3.2 to ICS 4.0.4. after full flasing HC 3.2 first.
Is this a known issue? I cannot find any decent info on this. Or is there a ROM that fixes this? Please help. Thanks in advance.
I had no problem with the WiFi what so ever not with 4.04 and not with cm 10 jelly bean
Did you have that problem on 3.2?
Try and flash the official ICS from sammobile with odin
Thankfor replying. I did not have this issue HC 3.2. I went back to stock HC3.2 and updated via WiFi to official ICS v4.0.4. No official releases for my country for P7510 are available for my Tab, but other official ICS v4.0.4 versions I tried from Sammobile have same issue.
I'm thinking to go to CM 10 release, but since wiping is required and my P7510 has brick bug, I'm hesitating to do this operation.
Try the sammobile UK version that's what iam running and it had no problems
Cm10 is faster than official ics and gives u much more options It's a better experience at least for me except for a bug or tow but some people don't even notice them
About the brick bug I don't know what that is cause I had no problems wiping data so i can't help u their sorry
Sent from galaxy tab 10.1
atsamoon said:
Try the sammobile UK version that's what iam running and it had no problems
Cm10 is faster than official ics and gives u much more options It's a better experience at least for me except for a bug or tow but some people don't even notice them
About the brick bug I don't know what that is cause I had no problems wiping data so i can't help u their sorry
Sent from galaxy tab 10.1
Click to expand...
Click to collapse
I already tried UK version from Sammobile, same WiFi issue when signal strength is not maximum. Regarding the brick bug: check this out: http://forum.xda-developers.com/showthread.php?t=1879941
Dead Silence said:
I already tried UK version from Sammobile, same WiFi issue when signal strength is not maximum. Regarding the brick bug: check this out: http://forum.xda-developers.com/showthread.php?t=1879941
Click to expand...
Click to collapse
I don't know what it's not working for you every thing oky with me
About the brick bug....... I just checked and as it turned out I too have the brick bug and I have actually ran EXPERIMENTAL-p4.zip
I have wiped the data and installed custom roms more than I can count......i don't know maybe it's over-rated or iam just lucky!!
Iam afraid to do it again now but he says here "Avoiding brick:
The only danger now seems to bi if you are on stock ICS ROM and you execute factory/data reset in Samsung recovery.
If you are using custom ROMs and CWM you should be safe because all custom ROMs/krenels have now removed mmc_cap_erase() from list of capabilities."
Iam running a custom rom so I don't know.....
Just as a quick intro, I'm not a total noob, but I'm no expert either. I had an OG Droid that I rooted and had installed several ROMS before upgrading to a Droid Razr. I decided to root this one also and I'm running CM 10.1.3 with JellyBean X kernel, all installed with Safestrap.
I had some issues with my baseband not working properly with CM, so I decided to try to install a clean version of Jelly Bean to see if that helped the problem. The ROM I was going to download required me to install BMM 3.0.4 which I did. Once that was done, I rebooted and lo and behold the phone booted into the original Verizon version of Jelly Bean. At this point I have not installed anything but BMM. Why did this happen? I thought I had done a wipe when I installed CM. Is this because I installed CM into a second slot and now BMM is booting to the original slot? As far as I know, CM is still on the phone somewhere. How can I get back to it? Is it going to be a problem as far as phone performance to have both of them on the system at the same time?
Finally, like everyone else, my goal is to get the best performance out of this phone. I would like to avoid the stock ROM due to all the bloatware. Is the clean JB a good option? Will this fix the baseband problem (poor to no service)? Is there a baseband fix I can use in conjunction with CM?
Thanks and sorry for all the questions.
Not sure if you are just looking @ AOSP ROMs, but I've done well with the bionx ROM: http://forum.xda-developers.com/showthread.php?p=45291834:
Its stock based, haven't had any issues and its different with some Xperia launcher and whatnot. Has a lot of options/tweaks in dashboard app as well..
Sent from my XT912 using tapatalk
Hey I flashed CyanFox 2.0.2 (CM11 / KitKat 4.4.2 based) and I've been experiencing constant signal issues.
One moment I have full bars and the next no signal at all. It happens randomly: during calls, while tethering, when on stand by.
I've tried different basebands / modems (MS1, MS2, MS4) but I couldn't find a fix.
Any ideas? I can always go back to stock JB but I really dig this KK rom, it's almost flawless otherwise.
Thanks
Make a backup of kitkat rom and try stock rom or some other rom stock rom is in my signature included stock kernel and modem. If it is working then its not a hardware problem then try maybe some other kitkat rom.
The link to stockrom in my signature is from xwms1 but i dont know or the moden works in every country
Sent from my GT-I9100 using Tapatalk
Did you check out calling anyone or receiving a call? Maybe its just the icon problem.......
In the end I flashed a stock 4.1.2 rom and the problem persisted, so I guess this is a hardware issue.
Thanks for the suggestions!