Hi All,
My P765 sudden cannot turn on this morning, and cannot enter any mode (download mode, recovery, etc...) :crying:
I still use stock rom and without root and not install 3rd party recovery.
blank screen when press any key, no LG logo, no Android logo.
When use usb connect to computer, it need OMAP driver..
I already follow and use Lelus script to fastboot, but also "Failed: Remote partition doesn't exist"
Does it already brick?
How can I unbrick? Thanks!
upd said:
Hi All,
My P765 sudden cannot turn on this morning, and cannot enter any mode (download mode, recovery, etc...) :crying:
I still use stock rom and without root and not install 3rd party recovery.
blank screen when press any key, no LG logo, no Android logo.
When use usb connect to computer, it need OMAP driver..
I already follow and use Lelus script to fastboot, but also "Failed: Remote partition doesn't exist"
Does it already brick?
How can I unbrick? Thanks!
Click to expand...
Click to collapse
Follow this Guide buddy...hope it helps you....
upd said:
Hi All,
My P765 sudden cannot turn on this morning, and cannot enter any mode (download mode, recovery, etc...) :crying:
I still use stock rom and without root and not install 3rd party recovery.
blank screen when press any key, no LG logo, no Android logo.
When use usb connect to computer, it need OMAP driver..
I already follow and use Lelus script to fastboot, but also "Failed: Remote partition doesn't exist"
Does it already brick?
How can I unbrick? Thanks!
Click to expand...
Click to collapse
Failed: remote partition doesn't exist -Usually means there's a hardware problem.
@upd
You might want to try this method to get in to S/W mode.
http://forum.xda-developers.com/showthread.php?t=2546571
Related
I've been trying to flash my p768 for JB V20A VIETNAM. i used V20A TELCEL, MEXICO Before this flashing.
So I started flashing the KDZ file, followed all the necessary steps and finally when the process is at 15 percent, flashing stopped saying there is a problem with communication between cell phone and pc.
So i did the workoaround, remove the usb cable and wait for at least 10 secs and reconnect, then waited for all the drivers to install. After restarting the whole process it got stack still at 15 percent. Now I cannot get out of Software update mode even if I remove the battery and start the device again.
also i use Following method. and it dosent work. and at 15 percent, flashing stopped saying there is a problem with communication between cell phone and pc Again.
method:If you were on JB, the phone won't be recognized on "S/W Update" screen by the offline method. You must use the online method :
- Remove the lines you put in your "hosts" file ("127.0.0.1 csmg.lgmobile.com" and "127.0.0.1 csmgdl.lgmobile.com") then reboot your computer
- Connect your phone (on the "S/W Update" mode)
- Directly start "B2CAppSetup.exe" : it should detect your phone
- Click on "Customer Support" then "Recovery Phone" (see screenshot on http://forum.xda-developers.com/show....php?t=2217710)
- Wait and pray... It can be long because it downloads the last KDZ file from official LG servers.
plz help meeee
saman_z1384 said:
I've been trying to flash my p768 for JB V20A VIETNAM. i used V20A TELCEL, MEXICO Before this flashing.
So I started flashing the KDZ file, followed all the necessary steps and finally when the process is at 15 percent, flashing stopped saying there is a problem with communication between cell phone and pc.
So i did the workoaround, remove the usb cable and wait for at least 10 secs and reconnect, then waited for all the drivers to install. After restarting the whole process it got stack still at 15 percent. Now I cannot get out of Software update mode even if I remove the battery and start the device again.
also i use Following method. and it dosent work. and at 15 percent, flashing stopped saying there is a problem with communication between cell phone and pc Again.
method:If you were on JB, the phone won't be recognized on "S/W Update" screen by the offline method. You must use the online method :
- Remove the lines you put in your "hosts" file ("127.0.0.1 csmg.lgmobile.com" and "127.0.0.1 csmgdl.lgmobile.com") then reboot your computer
- Connect your phone (on the "S/W Update" mode)
- Directly start "B2CAppSetup.exe" : it should detect your phone
- Click on "Customer Support" then "Recovery Phone" (see screenshot on http://forum.xda-developers.com/show....php?t=2217710)
- Wait and pray... It can be long because it downloads the last KDZ file from official LG servers.
plz help meeee
Click to expand...
Click to collapse
use offline flashing, or CWM restore
cgigate said:
use offline flashing, or CWM restore
Click to expand...
Click to collapse
offline flashing dosent work.
how does CWM restore??
when i turne on or connect battery to my phone Software update mode is appear. help plz
saman_z1384 said:
offline flashing dosent work.
how does CWM restore??
when i turne on or connect battery to my phone Software update mode is appear. help plz
Click to expand...
Click to collapse
Download a cwm rooted backup from this link http://forum.xda-developers.com/showthread.php?t=2136204, copy it to your sd card, access recovery and after doing wipes restore from external sd card. If you have any problem say it here.
hugoglezp said:
Download a cwm rooted backup from this link http://forum.xda-developers.com/showthread.php?t=2136204, copy it to your sd card, access recovery and after doing wipes restore from external sd card. If you have any problem say it here.
Click to expand...
Click to collapse
my phone didnt root so i dont have cwm. and it shows just Software Upgrade Mode screen when turn on it. and dosent get out this mode.
. so how i use cwm rooted backup??
saman_z1384 said:
my phone didnt root so i dont have cwm. and it shows just Software Upgrade Mode screen when turn on it. and dosent get out this mode.
. so how i use cwm rooted backup??
Click to expand...
Click to collapse
forget about cwm,
hard/factory reset your phone ; turn it off, press vol- & home & power on
remove all lg drivers and software etc, reboot pc and install lg pc suit , try recovery from there
Lelus said:
forget about cwm,
hard/factory reset your phone ; turn it off, press vol- & home & power on
remove all lg drivers and software etc, reboot pc and install lg pc suit , try recovery from there
Click to expand...
Click to collapse
in try to to hard factory reset when i hold turn on Software update mode appear quicly!! and when i'm holding it for 10 seconds my phone go to turn off.
does it mean hard reset applied?
saman_z1384 said:
in try to to hard factory reset when i hold turn on Software update mode appear quicly!! and when i'm holding it for 10 seconds my phone go to turn off.
does it mean hard reset applied?
Click to expand...
Click to collapse
you are in upgrade mode, you need flash kdz directly. i killed my phone many times.
if you still not get , sold as "none working for parts on eBay "
Sent from my LG-E970 using Tapatalk HD
any body help mee???? :|
The LG Update Tool can install latest drivers for you: did you properly install them ? If your phone can start in "S/W Update" mode, the online unbricking method should work, that's why I think you have a driver issue. Did you also try on another computer with another Windows version ? (the most "driver friendly" version would be a Windows XP at least on SP2).
OperationNT said:
The LG Update Tool can install latest drivers for you: did you properly install them ? If your phone can start in "S/W Update" mode, the online unbricking method should work, that's why I think you have a driver issue. Did you also try on another computer with another Windows version ? (the most "driver friendly" version would be a Windows XP at least on SP2).
Click to expand...
Click to collapse
yes i try by 3 cpmputer. they have win 7. but it doesnt fix
1: download and unpack xufix.7z
2: use this guide to fastboot your phone, follow what sguerrini97 wrote in 1st post rather than what omap4boot app says
3: run start.bat as administrator
4: put your phone into sw upgrade mode - turn it off, remove battery , hold vol+ and power and plug the usb cable ,"S/W Upgrade" will appear on the screen after a few seconds, put battery back in.
5: use online or offline method to flash any kdz for 768
Lelus said:
1: download and unpack xufix.7z
2: use this guide to fastboot your phone, follow what sguerrini97 wrote in 1st post rather than what omap4boot app says
3: run start.bat as administrator
4: put your phone into sw upgrade mode - turn it off, remove battery , hold vol+ and power and plug the usb cable ,"S/W Upgrade" will appear on the screen after a few seconds, put battery back in.
5: use online or offline method to flash any kdz for 768
Click to expand...
Click to collapse
tnx lelus. i hope it work
same problem with P769
Will watch this fix for results. I have same issue with P769 which has been stuck in s/w upgrade loop after offline server crashed. was at point of 12 bin files in appdata phone folder when server stopped.
Lelus said:
1: download and unpack xufix.7z
2: use this guide to fastboot your phone, follow what sguerrini97 wrote in 1st post rather than what omap4boot app says
3: run start.bat as administrator
4: put your phone into sw upgrade mode - turn it off, remove battery , hold vol+ and power and plug the usb cable ,"S/W Upgrade" will appear on the screen after a few seconds, put battery back in.
5: use online or offline method to flash any kdz for 768
Click to expand...
Click to collapse
when i run start.bat and plug the usb cable. that says flash x-loader p1.bin <waiting foe device>
and Nothing happen anymore
saman_z1384 said:
when i run start.bat and plug the usb cable. that says flash x-loader p1.bin <waiting foe device>
and Nothing happen anymore
Click to expand...
Click to collapse
you have to fastboot your phone first then run start.bat
Lelus can you please post theses files for P769 I have T-Mobile V20D USA stuck in s/w ugrade mode? Many thanks and I hit the button.
dish53 said:
Lelus can you please post theses files for P769 I have T-Mobile V20D USA stuck in s/w ugrade mode? Many thanks and I hit the button.
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=1971743&d=1368878496
When I fastbooted I get LG logo screen in reverse - which is something different from s/w upgrade I had before -- but then I open cmd prompt and run start.bat I get waiting for device
dish53 said:
When I fastbooted I get LG logo screen in reverse - which is something different from s/w upgrade I had before -- but then I open cmd prompt and run start.bat I get waiting for device
Click to expand...
Click to collapse
you need to install fastboot drivers twice, once before you run the omap4fastboot and again after running it when you see that mirrored fastboot text
So I recently wanted to load a custom rom on my p769.
Unfortunately, I tried to flash a rom without actually having the bootloader unlocked (thought i did?)
Now i'm forever stuck at the "LG Security Error" screen.
I can't seem to do anything else! :'(
The only other mode I can boot into is S/W update screen (holding volume up and plugging in usb cable).
I tried to get to another mode I read about (vol up + vol down then plug usb cable for "download" mode, to no avail)
Anyway, once I do get it into sw update mode, I can't seem to do anything either way, when i try to list adb devices, none are listed, when i try to use lg mobile tool, it never connects, when i try to use kdz offline update tool, it doesn't see the phone, it just keeps trying to connect, the log freaks out at "_IsConnectedPhone Call", and just keeps trying to "connect" to phone but can't
Am I totally screwed here?
What can I do? Any help appreciated!
rotatorkuf said:
So I recently wanted to load a custom rom on my p769.
Unfortunately, I tried to flash a rom without actually having the bootloader unlocked (thought i did?)
Now i'm forever stuck at the "LG Security Error" screen.
I can't seem to do anything else! :'(
The only other mode I can boot into is S/W update screen (holding volume up and plugging in usb cable).
I tried to get to another mode I read about (vol up + vol down then plug usb cable for "download" mode, to no avail)
Anyway, once I do get it into sw update mode, I can't seem to do anything either way, when i try to list adb devices, none are listed, when i try to use lg mobile tool, it never connects, when i try to use kdz offline update tool, it doesn't see the phone, it just keeps trying to connect, the log freaks out at "_IsConnectedPhone Call", and just keeps trying to "connect" to phone but can't
Am I totally screwed here?
What can I do? Any help appreciated!
Click to expand...
Click to collapse
You're on JB, right? KDZ offline flash tool cannot detect phone in JB. you have to flash ICS x-loader/u-boot then that tool can detect your phone. please visit http://forum.xda-developers.com/showthread.php?t=2292828
For LG mobile support tool problem, it need to download rom from LG server. Have you remove/comment 1-2 line that you add to hosts file? You said it never connect that mean it don't see your phone?
artit said:
You're on JB, right? KDZ offline flash tool cannot detect phone in JB. you have to flash ICS x-loader/u-boot then that tool can detect your phone. please visit http://forum.xda-developers.com/showthread.php?t=2292828
For LG mobile support tool problem, it need to download rom from LG server. Have you remove/comment 1-2 line that you add to hosts file? You said it never connect that mean it don't see your phone?
Click to expand...
Click to collapse
I've tried this as well, but I don't know if i'm doing it correctly
I installed the 'drivers' it needs (following the readme file) when it shows the "unknown/other" device (the part where you have to catch it in device manager).
After this, I run the start.bat, enter 5 and hit enter, i unplug my phone and hit any key, then i plug it in as it says and it does it's thing, then i wait for 4 seconds when it begins to say "waiting for device", i put my battery in and it just stays there, waiting for device
Can you help me figure this out? Am I doing something wrong?
rotatorkuf said:
I've tried this as well, but I don't know if i'm doing it correctly
I installed the 'drivers' it needs (following the readme file) when it shows the "unknown/other" device (the part where you have to catch it in device manager).
After this, I run the start.bat, enter 5 and hit enter, i unplug my phone and hit any key, then i plug it in as it says and it does it's thing, then i wait for 4 seconds when it begins to say "waiting for device", i put my battery in and it just stays there, waiting for device
Can you help me figure this out? Am I doing something wrong?
Click to expand...
Click to collapse
Please read these three link
http://forum.xda-developers.com/showpost.php?p=44578108&postcount=34
http://forum.xda-developers.com/showpost.php?p=44653501&postcount=55
http://forum.xda-developers.com/showpost.php?p=43642515&postcount=21
kuma82 said:
Please read these three link
http://forum.xda-developers.com/showpost.php?p=44578108&postcount=34
http://forum.xda-developers.com/showpost.php?p=44653501&postcount=55
http://forum.xda-developers.com/showpost.php?p=43642515&postcount=21
Click to expand...
Click to collapse
i think i'm making some progress, thanks for helping so far!
anyway, i'm able to get fastboot on my phone (i think?), the screen on the phone shows the flipped LG logo and at the top right it says 2.0 fastboot (flipped of course)
but, what am i supposed to do here?
i see the 2 omap devices listed on my device manager
whenever i try to run the kdz offline flash tool (if i'm using the right one), it still doesn't detect the phone as connected, doesn't even try, just errors and tells me to connect to usb port and restart or exit
what am i supposed to do once i'm in fastboot recovery for my phone?
should i comment out the 2 listings i added to the hosts file? should i NOT be running shttps app? which kdz offline flash tool should i be using? (currently trying: UpTestEX_mod2_marwin.exe)
rotatorkuf said:
i think i'm making some progress, thanks for helping so far!
anyway, i'm able to get fastboot on my phone (i think?), the screen on the phone shows the flipped LG logo and at the top right it says 2.0 fastboot (flipped of course)
but, what am i supposed to do here?
i see the 2 omap devices listed on my device manager
whenever i try to run the kdz offline flash tool (if i'm using the right one), it still doesn't detect the phone as connected, doesn't even try, just errors and tells me to connect to usb port and restart or exit
what am i supposed to do once i'm in fastboot recovery for my phone?
should i comment out the 2 listings i added to the hosts file? should i NOT be running shttps app? which kdz offline flash tool should i be using? (currently trying: UpTestEX_mod2_marwin.exe)
Click to expand...
Click to collapse
You should run start.bat and select flash ICS u-boot/x-loader for P769
When it finish, reboot you phone to S/W update mode and try to use UpTestEX_mod2_marwin.exe to flash your P769 kdz again to restore your phone.
Maybe I miss something about P769 model, please search in FAQ forum many people have this issue, and most of them have fixed it.
artit said:
You should run start.bat and select flash ICS u-boot/x-loader for P769
When it finish, reboot you phone to S/W update mode and try to use UpTestEX_mod2_marwin.exe to flash your P769 kdz again to restore your phone.
Maybe I miss something about P769 model, please search in FAQ forum many people have this issue, and most of them have fixed it.
Click to expand...
Click to collapse
you guys are awesome!
finally got my phone back on rooted firmware
now to unlock the bootloader
Hello forgive me for my bad english
Please help, I have a problem with my phone LGp760, I do a hard reset but when the phone restarts, I got this error :crying: I can't enter to the phone to change the setting and i can't install the system again because the usb debugging is disabled,
Try updating with LGMobile support tool, i dont think usb debugging matters in that or try flashing kdz with offline fix.
Help
YashdSaraf said:
Try updating with LGMobile support tool, i dont think usb debugging matters in that or try flashing kdz with offline fix.
Click to expand...
Click to collapse
i try it with offline fix but i have this problem "error: device not found" the driver is already installed
hafidonly said:
Hello forgive me for my bad english
Please help, I have a problem with my phone LGp760, I do a hard reset but when the phone restarts, I got this error :crying: I can't enter to the phone to change the setting and i can't install the system again because the usb debugging is disabled,
Click to expand...
Click to collapse
If unlocked bootloader,if set cwm,before starting any arhive to recovery,in updater-script paste the:
Code:
delete("/system/app/LGSetupWizard.apk")
delete("/system/app/LGSetupWizard.odex")
Sorry for my ENG
hafidonly said:
i try it with offline fix but i have this problem "error: device not found" the driver is already installed
Click to expand...
Click to collapse
3 options
1 If you're on stock JB and don't have CWM or other recovery installed, You can enter stock recovery with holding Vol- & Home & Power buttom. It'll show android with red regtamgle and you can use adb in that recovery to pull & push files.
2 If that don't work you can try to recover your phone using LG mobile support tool (in my signature)
3 If you want to do a offline flash. On JB firmware flash program don't recognize your phone. You should flash ICS u-boot/x-loader on your phone first using lelus tool. (again in my signature)
artit said:
3 options
1 If you're on stock JB and don't have CWM or other recovery installed, You can enter stock recovery with holding Vol- & Home & Power buttom. It'll show android with red regtamgle and you can use adb in that recovery to pull & push files.
2 If that don't work you can try to recover your phone using LG mobile support tool (in my signature)
3 If you want to do a offline flash. On JB firmware flash program don't recognize your phone. You should flash ICS u-boot/x-loader on your phone first using lelus tool. (again in my signature)
Click to expand...
Click to collapse
Think you i will try if not work i will ask your experience
Merci
Hello
I think I've bricked my P760. When i want to run my phone it stuck on LG logo and can't boot to OS. Everything was fine but after installing fix to camera i could boot to OS my phone once and after reboot i can't boot to OS anymore. My phone has root, unlocked bootloader, custom recovery and custom ROM. I don't have acces to recovery. I have only acces to bootloader mode with fastboot (VOL+ + HOME + POWER). Then i have a note "Welcome to LG Fastboot Mode ". My computer detects it and automatically installs drivers (Fastboot interface (Google USB ID). But the problem is that in Device Manager it all time blinks. It's connected and immediately dissconects. I'm using original USB cable from LG charger. When i'm trying to use cmd in fastboot & adb files it's waiting for device all the time.
I don't know what I should do next :C
Pls help guys
SaRLaY said:
Hello
I think I've bricked my P760. When i want to run my phone it stuck on LG logo and can't boot to OS. Everything was fine but after installing fix to camera i could boot to OS my phone once and after reboot i can't boot to OS anymore. My phone has root, unlocked bootloader, custom recovery and custom ROM. I don't have acces to recovery. I have only acces to bootloader mode with fastboot (VOL+ + HOME + POWER). Then i have a note "Welcome to LG Fastboot Mode ". My computer detects it and automatically installs drivers (Fastboot interface (Google USB ID). But the problem is that in Device Manager it all time blinks. It's connected and immediately dissconects. I'm using original USB cable from LG charger. When i'm trying to use cmd in fastboot & adb files it's waiting for device all the time.
I don't know what I should do next :C
Pls help guys
Click to expand...
Click to collapse
I can help you. i just figured it out after walking away for a few weeks. pm me and ill tell you over google+ or skype and walk you through it.
i have same problem.
can someone solved it?
SaRLaY said:
Hello
I think I've bricked my P760. When i want to run my phone it stuck on LG logo and can't boot to OS. Everything was fine but after installing fix to camera i could boot to OS my phone once and after reboot i can't boot to OS anymore. My phone has root, unlocked bootloader, custom recovery and custom ROM. I don't have acces to recovery. I have only acces to bootloader mode with fastboot (VOL+ + HOME + POWER). Then i have a note "Welcome to LG Fastboot Mode ". My computer detects it and automatically installs drivers (Fastboot interface (Google USB ID). But the problem is that in Device Manager it all time blinks. It's connected and immediately dissconects. I'm using original USB cable from LG charger. When i'm trying to use cmd in fastboot & adb files it's waiting for device all the time.
I don't know what I should do next :C
Pls help guys
Click to expand...
Click to collapse
mirul_up said:
i have same problem.
can someone solved it?
Click to expand...
Click to collapse
pseudosane said:
I can help you. i just figured it out after walking away for a few weeks. pm me and ill tell you over google+ or skype and walk you through it.
Click to expand...
Click to collapse
Go through this thread http://forum.xda-developers.com/showthread.php?t=2292828 it will definitely solve your problem, from the screen-shot it seems that you are using windows 10, i'm not sure that omap4430 drivers will work on windows 10 or not, but you'll try otherwise do the process on windows 7, your phone will revive...
@Codeplex its to complicated thread.
before mine become like this my phone alway succes writing recovery via adb fastboot but now i try writing recovery via adb fastboot always filed.
flashing firmware with cmahendra method always get 15% error..
I think all dev not care anymore about our phone..,
Hei everyone! I bricked my G2 MINI while tryin to unlock bootloader. I finally found a guide to unbrick it and via fastboot i have erased the LAF.IMG .
Now, when i try to get in download mode (battery at 0%, hold vol + button and connect usb cable) the phone shows for a second the "fastboot" screen that says to continue holding vol + for etnering download mode than ----> black screen and LG logo appears, black screen again and the phone reboot again and again...
Someone know how to get in fastboot without go in download mode?
I have only to get in fastboot then i'll push the boot,laf files to flash the complete firmware...PLEASE HELP!
mattia.frenk said:
Hei everyone! I bricked my G2 MINI while tryin to unlock bootloader. I finally found a guide to unbrick it and via fastboot i have erased the LAF.IMG .
Now, when i try to get in download mode (battery at 0%, hold vol + button and connect usb cable) the phone shows for a second the "fastboot" screen that says to continue holding vol + for etnering download mode than ----> black screen and LG logo appears, black screen again and the phone reboot again and again...
Someone know how to get in fastboot without go in download mode?
I have only to get in fastboot then i'll push the boot,laf files to flash the complete firmware...PLEASE HELP!
Click to expand...
Click to collapse
did you try pull out the battery
connect phone to pc press vol - and put the battery back in
i bricked my device and so i got into download mode and connected to lg tools and installed 4.4 kitkat again here is link if you need download tools
http://www.mylgphones.com/lg-software-tools-download
If he really erased LAF from his phone he can not get into download mode any more, because LAF is the download mode.
If he was in the situation where he could erase LAF he could have easily rescued his phone by flashing stock images.
Now it will be hard to rescue but there is nothing to loose any more.
You can try to get into fastboot by:
hold vol + button and connect usb cable.
As soon as you see the fastboot screen release all buttons.
Try to connect your phone via fastboot.
Try to flash original aboot + original LAF
Maybe flash original boot + system
or
Go to Download mode and flash original KDZ in emergency mode (CSE).
Zaaap72 said:
If he really erased LAF from his phone he can not get into download mode any more, because LAF is the download mode.
If he was in the situation where he could erase LAF he could have easily rescued his phone by flashing stock images.
Now it will be hard to rescue but there is nothing to loose any more.
You can try to get into fastboot by:
hold vol + button and connect usb cable.
As soon as you see the fastboot screen release all buttons.
Try to connect your phone via fastboot.
Try to flash original aboot + original LAF
Maybe flash original boot + system
or
Go to Download mode and flash original KDZ in emergency mode (CSE).
Click to expand...
Click to collapse
Thank u zaaap! Unfortunately even when i release all buttons the telephone get into the download mode (that dont exist anymore) and reboot... Im a fool that forget to push the laf stock. Anyway i bought a new motherboard... I think that replacing will solve my problem..
If you connect the phone to USB with a PC, does the PC show anything in explorer or device manager?
If yes, there is still a chance to recover it.
I'm referring to THIS task.
I have not done it before but it could work and you have nothing to loose.
Make sure you get the correct KDZ for your phone from HERE.
Extract the original images with WindowsLGFirmwareExtract
You can find the partition list HERE
Zaaap72 said:
If you connect the phone to USB with a PC, does the PC show anything in explorer or device manager?
If yes, there is still a chance to recover it.
I'm referring to THIS task.
I have not done it before but it could work and you have nothing to loose.
Make sure you get the correct KDZ for your phone from HERE.
Extract the original images with WindowsLGFirmwareExtract
You can find the partition list HERE
Click to expand...
Click to collapse
Nope man, i only hear the usb plug in/plug out sound of Win7 but nothing in explorer or the lg app on the pc. Its obvious that i have the drivers stock and the others of Android SDK platforms (i used adb and fastboot very uasually when the telephone was funtional).
Anyway thank u all for the help, i had the telephone bricked for the unlocking of the bootloader and i thought that my phone was over, the argument is very difficult to afford on this site and on this device, i sent the telephone at the LG Custom Care and they only told me that the motherboard was over and replace it costs 130€ (im Italian) so i reclined their offer (i have also a Oneplus X) but after some deep research on XDA i made big steps forward and maybe if didnt make the stupid thing of forgot to flash the laf stock, maybe i could be able to rescue my phone. So a big big big Thank to the community of XDA and a infinite f**k to LG Custom Care that they would stole me 130€.
Ps. I bought an LG D620 with the display destroyed for 30€ and ill replace the Motherboard.
Pps. Sorry for my bad English.
mattia.frenk said:
Nope man, i only hear the usb plug in/plug out sound of Win7 but nothing in explorer or the lg app on the pc.
Click to expand...
Click to collapse
OK, sounds good. And what does the devicemanager show?
Is there something like QHSUSB_BULK or Qualcomm HS-USB Qloader ?
Please how to install LG d620 LGE Android MTP Device driver. I tried all I can, to no avail. Pls help.
Ntarikon said:
Please how to install LG d620 LGE Android MTP Device driver. I tried all I can, to no avail. Pls help.
Click to expand...
Click to collapse
Wrong thread.
But, if you have a stock ROM, use LG's drivers. If you have a custom ROM, use Google's drivers.