Check your device model ! Settings -> About device -> Model number. See the third post for exact supported model numbers. If your device is a totally different model, it will not work (may even brick) !
CF-Root is the root for "rooting beginners" and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root.
Donate
CF-Root has been available for many devices (Galaxy S1, S2, S3, S4, Galaxy Note, Note2, Note3, dozens of Tab models, etc!) and has clocked over 22.5 million downloads. This is not even counting custom ROMs that already include it. Don't be a leech, buy me a beer (and use the "Thanks" button!). Imagine if every CF-Root user has donated me $1...
What's installed
- SuperSU binary and APK
- Stock recovery
Installation and usage
Flash the CF-Auto-Root package as PDA in ODIN (details on how to do that are in next post), and your device should reboot into a modified recovery (signified by a large red Android logo) and it will install SuperSU for you and restore the stock recovery, and reboot back into Android.
If you don't get to the red Android logo, boot into recovery manually ("adb reboot recovery", or boot while holding Power+VolUp+Home).
Using this root increases your flash counter and trips the KNOX warranty flag!
Did you see the red Android logo during rooting, but SuperSU does not appear? This may sometimes occur due to left-over files and settings, however, you can usually install SuperSU from Google Play at this stage and it'll just work.
CF-Auto-Root homepage
http://autoroot.chainfire.eu/
CF-Auto-Root main thread
[CENTRAL] CF-Auto-Root
For requests for new roots and generic discussion - please keep device specific discussion in the thread you are viewing now.
ODIN Installation (detailed)
Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!
- Download and unzip the CF-Auto-Root-....zip file (see posts below this one)
- If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
- Done (if it took you more than 30 seconds, you need practise!)
NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This will start the install process.
New to Samsung? Unfamiliar with Odin? Think all the above is a hassle? Get used to it. It's very simple, and us Samsung folk use Odin (or Mobile ODIN ) for everything! It's so very very convenient once you get used to it. Notice the 30 second comment above? For experienced users, the entire process indeed takes only 30 seconds!
Download
SM-G900F (International Qualcomm): CF-Auto-Root-klte-kltexx-smg900f.zip
SM-G900H (International Exynos): CF-Auto-Root-k3g-k3gxx-smg900h.zip
SM-G900I (Oceania?): CF-Auto-Root-klte-kltedv-smg900i.zip
SM-G900L (Korea): CF-Auto-Root-kltelgt-kltelgt-smg900l.zip
SM-G900M (Middle and South America?): CF-Auto-Root-klte-klteub-smg900m.zip
SM-G900R4 (US Cellular): CF-Auto-Root-klteusc-klteusc-smg900r4.zip
SM-G900T (T-Mobile US): CF-Auto-Root-kltetmo-kltetmo-smg900t.zip
SM-G900P (Sprint): CF-Auto-Root-kltespr-kltespr-smg900p.zip
SM-G900T1 (Metro PCS): CF-Auto-Root-kltemetropcs-kltemetropcs-smg900t1.zip
SM-G900W8 (Canada): CF-Auto-Root-kltecan-kltevl-smg900w8.zip
SM-G900S (Korea?): CF-Auto-Root-klteskt-klteskt-smg900s.zip
SM-G901F: http://download.chainfire.eu/481/CF-Root/CF-Auto-Root/CF-Auto-Root-kccat6-kccat6xx-smg901f.zip
SM-G906K: http://download.chainfire.eu/539/CF...to-Root-lentisltektt-lentisltektt-smg906k.zip
SM-G906L: http://download.chainfire.eu/540/CF...to-Root-lentisltelgt-lentisltelgt-smg906l.zip
SM-G906S: http://download.chainfire.eu/541/CF...to-Root-lentislteskt-lentislteskt-smg906s.zip
Other models
CF-Auto-Root is not yet available for all models - one stock firmwares for these models become available, let me know, and I'll make the corresponding CF-Auto-Roots. Make sure to check the main CF-Auto-Root site as well, as models may be listed there that are not listed here.
Proudly the 1st one to be rooted after your release CF
Sent from my SM-G900F using Tapatalk
bravo!
this root files g9006v can't working//
Now I will surely buy S5.
Thanks to Chainfire!
Great Job.
you beast, bravo!
I love you Chainfire! You are amazing. Definitely the first method I go to when rooting a device that your tool supports. I hope the AT&T S5 isn't super locked down.
Kudos yet again chainfire. Simply my go to dev for everything root.
Sent from my SGH-I337M using Tapatalk
you gotta be kidding,,
you rooted S5
this device isn't available on my country yet
Oh, wow!
And you did it again!
You rock, man!
Now i will buy the Galaxy S5.
Thank you, for your great work!
Sent from my HTC One (M7) with Tapatalk App
Hello my [now celebrity] friend, been a long time. Congratulations for this latest development!
@Chainfire you seriously make me wet (and im a guy..) every time i see your name come up on XDA. Your genius has no boundaries Rock on dude! Never stop being awesome!!
Cool beans :good:
S5 here I come.
Xda should implement a "Most Influential Member" award. Without @Chainfire most devices wouldn't have any lifespan longer than the next upgrade.
Chainfire = beast! Pure genius! Chainfire just gave me another reason to buy the S5. Big ups!
Chainfire said:
Check your device model ! Settings -> About device -> Model number. See the third post for exact supported model numbers. If your device is a totally different model, it will not work (may even brick) !
CF-Root is the root for "rooting beginners" and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root.
Donate
CF-Root has been available for many devices (Galaxy S1, Galaxy S2, S4, S4, Galaxy Note, Note2, Note3, dozens of Tab models, etc!) and has clocked over 22.5 million downloads. This is not even counting custom ROMs that already include it. Don't be a leech, buy me a beer (and use the "Thanks" button!). Imagine if every CF-Root user has donated me $1...
What's installed
- SuperSU binary and APK
- Stock recovery
Installation and usage
Flash the CF-Auto-Root package as PDA in ODIN (details on how to do that are in next post), and your device should reboot into a modified recovery (signified by a large red Android logo) and it will install SuperSU for you and restore the stock recovery, and reboot back into Android.
If you don't get to the red Android logo, boot into recovery manually ("adb reboot recovery", or boot while holding Power+VolUp+Home).
Using this root increases your flash counter and trips the KNOX warranty flag!
Did you see the red Android logo during rooting, but SuperSU does not appear? This may sometimes occur due to left-over files and settings, however, you can usually install SuperSU from Google Play at this stage and it'll just work.
CF-Auto-Root homepage
http://autoroot.chainfire.eu/
CF-Auto-Root main thread
[CENTRAL] CF-Auto-Root
For requests for new roots and generic discussion - please keep device specific discussion in the thread you are viewing now.
Click to expand...
Click to collapse
Rockstar
:highfive:
Awesome...
Related
Ok so guys I bought a galaxy s2 I9100 last night...
And it is my first experience with android so i dont know anything about android...
I have previously used an ipod touch and jailbreaking was very simple....
But i tried to read about rooting my S2 , but everything bounced over my head....
Can anyone please tell me about rooting, cyanogen mod etc...
It would be really great someone explains me about all this stuff...
Thanks in advance.....
and ya
MODEL NO. GT-I9100
ANDROID version 2.3.3
BASEBAND version-I9100DDKE4
KERNEL [email protected]#2
BUILD NUMBER-GENGERBREAD.XWKF3
hiback said:
Ok so guys I bought a galaxy s2 I9100 last night...
And it is my first experience with android so i dont know anything about android...
I have previously used an ipod touch and jailbreaking was very simple....
But i tried to read about rooting my S2 , but everything bounced over my head....
Can anyone please tell me about rooting, cyanogen mod etc...
It would be really great someone explains me about all this stuff...
Thanks in advance.....
and ya
MODEL NO. GT-I9100
ANDROID version 2.3.3
BASEBAND version-I9100DDKE4
KERNEL [email protected]#2
BUILD NUMBER-GENGERBREAD.XWKF3
Click to expand...
Click to collapse
read this first
http://forum.xda-developers.com/showthread.php?t=1134290
then once you read that go here to root your phone and follow the guide carefully.. you need to cf-kernel to root your phone to be able to enjoy android more...here is the link
http://forum.xda-developers.com/showthread.php?t=1103399
any questions feel free to ask...but i will be honest just enjoy your handset for the time being read upon android and you should be fine..either way welcome aboard..
hiback said:
Ok so guys I bought a galaxy s2 I9100 last night...
And it is my first experience with android so i dont know anything about android...
I have previously used an ipod touch and jailbreaking was very simple....
But i tried to read about rooting my S2 , but everything bounced over my head....
Can anyone please tell me about rooting, cyanogen mod etc...
It would be really great someone explains me about all this stuff...
Thanks in advance.....
and ya
MODEL NO. GT-I9100
ANDROID version 2.3.3
BASEBAND version-I9100DDKE4
KERNEL [email protected]#2
BUILD NUMBER-GENGERBREAD.XWKF3
Click to expand...
Click to collapse
There are many different stories to talk about.
As it is very difficult for me to identify your interests and knowledge, I reduce my answer to the IMO most important threads for SGS2:
1. Intratech's Official Firmware thread => http://forum.xda-developers.com/showthread.php?t=1075278
Please read the first post. There is a detailed description of how to flash a new Firmware/ROM to your phone, and there is a Quick Root Guide too.
This rooting method is very elegant (as you do not get a yellow triangle and the binary counter will not be increased), but it is a little bit "manual".
For a little bit more "automated" rooting, look at the next thread.
Most important is, that you can find the latest, official and stable Firmware version most as non-wipe together with the corresponding stock kernel, which you might need for getting rid of the yellow triangle after flashing a rooted kernel (such as CF-Root or SpeedMod).
I always prefer flashing Frankenstein ROMs from third post, as you can combine them to any other Firmware parts, such as Modem/Phone/Baseband (for inter-connectivity) and CSC (for region and/or carrier dependent customizations) files.
2. Chainfire's CF-Root thread => http://forum.xda-developers.com/showthread.php?t=1103399&highlight=CF+Root
Everything you need to root your phone is to flash a rooted kernel to your phone (See description in first post).
And if you want to get rid of the yellow triangle, Chainfire has described it in his second post.
The only thing to do is to find the corresponding kernel for your ROM.
So, it is useful to flash a new ROM first, then flash the corresponding CF-Root kernel and you have root access on your phone.
There are many other goodies which come along with CF-Root kernel, such as ClockWorkMod (CWM) recovery mode (an extended recovery mode including features, such as backup&restore, clear Dalvik cache, flash other zip files from sd card, etc.) and CWM Manager app (to have a very user-friendly app to make use of most new CWM recovery features).
But you can use any other rooted kernel, which is compatible with your ROM, to root your phone.
3. Custom ROMs ... such as CyanogenMod ...
There are many, custom ROMs and kernels optimized for different things, such as better performance (higher scores in benchmarks) or longer battery life.
You have to take your time and search on yourself what you really want most and which custom ROM or kernel you want to try.
Stick to the SGS II Official Android Development forum => http://forum.xda-developers.com/forumdisplay.php?f=1058
... search, read, test !
Just to be on the "safe" side, do a backup before flashing.
If you have CWM recovery mode (or CWM Manager app), just do a complete system / nandroid backup.
So you will be able to restore this backup, if one of the tested custom ROMs or kernels messed up your phone.
Good luck !
This Thing is really scary....lolz......
I mean it is too damn hard to understand....
really jailbreaking is so mch easier.....
And ya What is bricking of device... How can i prevent bricking of my sgs2 while rooting...
hiback said:
How can i prevent bricking of my sgs2 while rooting...
Click to expand...
Click to collapse
By reading the threads stated above, multiple times, very carefully.
I can jailbreak a phone in my sleep, but this stuff kinda went over my head too. I got the GS2 (my first android also) a couple of months ago and have been reading up on stuff periodically but still don't understand a lot of it.
It's why I'm glad there are so many helpful people who write clear guides on how to do stuff.
I'm sure by the time the GS3 comes out I'll have a bit of a grasp on things!!
But just read read read.
Good luck.
Yea I was scared too. All I can say is, READ THE STEPS ONCE, TWICE, AND AGAIN BEFORE YOU TOUCH YOUR PHONE.
First off. It's not possible to brick it when flashing a kernel(to root). The only way to brick is replacing the boot loader, only official Samsung ROM's do that and it takes less than a second so the chances are slim. I say you start by downloading CF-ROOT for your current firmware. Just be careful and read the instructions. I also recommend to only flash roms from XDA. Also, never use PIT file in ODIN. Welcome to Android, I was new as well 3 months ago and I've been changing kernels and roms like crazy since then
Your current firmware is KF3. I HIGHLY recommend downloading and installing KJ3 from Intratech's thread. It is very fast. Download the one from Frankenstein firmwares. That will not root, you need to flash cf-root or other rooted kernels to do that.
Sent from my GT-I9100 using xda premium
hiback said:
This Thing is really scary....lolz......
I mean it is too damn hard to understand....
really jailbreaking is so mch easier.....
And ya What is bricking of device... How can i prevent bricking of my sgs2 while rooting...
Click to expand...
Click to collapse
dont worry mate i felt the same as well..but as stated above by the rest of the posts read carefully the steps and you should be fine honestly
People talk about jailbreaking iPhones being easy, i could say the same about rooting and flashing ROM's, simple to do once you get the hang of it (and read up)
Just take it slow, pour a coffee and read. I can't stress it enough. It'll make you more comfortable when you actually do it.
Search for the "litening ROM" has great step by step including links to Odin and all that good stuff.
Sent from my GT-I9100 using xda premium
So Guys I rooted My SGS 2 using the following method..
First of all, make sure you’re having all these tools mentioned below at the time rooting.
Odin Downloader
XWKDD tar file [don’t extract, leave as it is]
SuperOneClick
USB Data Cable
Samsung’s KIES 2.0 or get it from download page
Install Samsung Kies 2.0,if not installed, as you will need the correct USB driver for software’s to communicate. Turn on USB debugging mode in galaxy s2 from Setting>Applications>Development>USB Debugging
1. Boot device into download mode. For getting into download mode on galaxy s2, first turn off the phone and power it on again by pressing Volumedown button, Home button and Power simultaneously. You’ll see a downloading icon once you go into this mode.
2. Start Odin downloader
3. Connect phone to computer via USB.
4. Odin software will notify you when it detects phone and gets connected.
5. In the software, just select “Auto Reboot” and “Reset Time” checkboxes and leave every other options as default.
6. Press PDA icon and select the XWDD tar file you just downloaded [XWKDD_insecure.tar]
7. Press Start and ODIN will flash the kernel and after that, Galaxy S2 will reboot.
8. Don’t remove the phone from USB and let it reboot.
9. After rebooting, start SuperOneClick and press ROOT.
9. Once again reboot the device.
That’s it, Your Samsung Galaxy S2 is now Rooted!!
Now enjoy all the custom roms and overclocking apps for galaxy without any restrictions.
And I used CWM manager to remove the yellow triangle....
Now what else do i need to do...
It_ler said:
There are many different stories to talk about.
As it is very difficult for me to identify your interests and knowledge, I reduce my answer to the IMO most important threads for SGS2:
1. Intratech's Official Firmware thread => http://forum.xda-developers.com/showthread.php?t=1075278
Please read the first post. There is a detailed description of how to flash a new Firmware/ROM to your phone, and there is a Quick Root Guide too.
This rooting method is very elegant (as you do not get a yellow triangle and the binary counter will not be increased), but it is a little bit "manual".
For a little bit more "automated" rooting, look at the next thread.
Most important is, that you can find the latest, official and stable Firmware version most as non-wipe together with the corresponding stock kernel, which you might need for getting rid of the yellow triangle after flashing a rooted kernel (such as CF-Root or SpeedMod).
I always prefer flashing Frankenstein ROMs from third post, as you can combine them to any other Firmware parts, such as Modem/Phone/Baseband (for inter-connectivity) and CSC (for region and/or carrier dependent customizations) files.
2. Chainfire's CF-Root thread => http://forum.xda-developers.com/showthread.php?t=1103399&highlight=CF+Root
Everything you need to root your phone is to flash a rooted kernel to your phone (See description in first post).
And if you want to get rid of the yellow triangle, Chainfire has described it in his second post.
The only thing to do is to find the corresponding kernel for your ROM.
So, it is useful to flash a new ROM first, then flash the corresponding CF-Root kernel and you have root access on your phone.
There are many other goodies which come along with CF-Root kernel, such as ClockWorkMod (CWM) recovery mode (an extended recovery mode including features, such as backup&restore, clear Dalvik cache, flash other zip files from sd card, etc.) and CWM Manager app (to have a very user-friendly app to make use of most new CWM recovery features).
But you can use any other rooted kernel, which is compatible with your ROM, to root your phone.
3. Custom ROMs ... such as CyanogenMod ...
There are many, custom ROMs and kernels optimized for different things, such as better performance (higher scores in benchmarks) or longer battery life.
You have to take your time and search on yourself what you really want most and which custom ROM or kernel you want to try.
Stick to the SGS II Official Android Development forum => http://forum.xda-developers.com/forumdisplay.php?f=1058
... search, read, test !
Just to be on the "safe" side, do a backup before flashing.
If you have CWM recovery mode (or CWM Manager app), just do a complete system / nandroid backup.
So you will be able to restore this backup, if one of the tested custom ROMs or kernels messed up your phone.
Good luck !
Click to expand...
Click to collapse
So Guys I rooted My SGS 2 using the following method..
First of all, make sure you’re having all these tools mentioned below at the time rooting.
Odin Downloader
XWKDD tar file [don’t extract, leave as it is]
SuperOneClick
USB Data Cable
Samsung’s KIES 2.0 or get it from download page
Install Samsung Kies 2.0,if not installed, as you will need the correct USB driver for software’s to communicate. Turn on USB debugging mode in galaxy s2 from Setting>Applications>Development>USB Debugging
1. Boot device into download mode. For getting into download mode on galaxy s2, first turn off the phone and power it on again by pressing Volumedown button, Home button and Power simultaneously. You’ll see a downloading icon once you go into this mode.
2. Start Odin downloader
3. Connect phone to computer via USB.
4. Odin software will notify you when it detects phone and gets connected.
5. In the software, just select “Auto Reboot” and “Reset Time” checkboxes and leave every other options as default.
6. Press PDA icon and select the XWDD tar file you just downloaded [XWKDD_insecure.tar]
7. Press Start and ODIN will flash the kernel and after that, Galaxy S2 will reboot.
8. Don’t remove the phone from USB and let it reboot.
9. After rebooting, start SuperOneClick and press ROOT.
9. Once again reboot the device.
That’s it, Your Samsung Galaxy S2 is now Rooted!!
Now enjoy all the custom roms and overclocking apps for galaxy without any restrictions.
And I used CWM manager to remove the yellow triangle....
Now what else do i need to do...
Now what else do i need to do...
hiback said:
Now what else do i need to do...
Click to expand...
Click to collapse
For now just enjoy your phone as is probably. Over time you will find out what you really needed root for. For me titanium backup is number 1.
Unlike an iPhone, even without rooting you can do most things you need but yeah some need root.
Personally I would have rooted using cf root/speedmod etc to have cwm recovery for backups.
Sent from my GT-I9100 using xda premium
Also, to root you could have simply just flashed cf root in Odin as PDA and your done.
Sent from my GT-I9100 using xda premium
hiback said:
This Thing is really scary....lolz......
I mean it is too damn hard to understand....
really jailbreaking is so mch easier.....
And ya What is bricking of device... How can i prevent bricking of my sgs2 while rooting...
Click to expand...
Click to collapse
You shouldnt worry just a new platform. Depending on how patient you have been after updating the new firmware on your iOS toys jailbreaking can be much worse than this. Apple developer fanboys have a tendency to wrap it up with a pretty little gui and a sexy dress but it is really just as many steps. We just like it au naturel over here
Sent from my GT-I9100 using XDA App
Asgerlund said:
You shouldnt worry just a new platform. Depending on how patient you have been after updating the new firmware on your iOS toys jailbreaking can be much worse than this. Apple developer fanboys have a tendency to wrap it up with a pretty little gui and a sexy dress but it is really just as many steps. We just like it au naturel over here
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Ok so i have installed Cyanogem Mod 7.1.0 ...
But now i want to get back to my stock firmware because i want to use tv out function which is missing from Cyanogen mod 7.1.0 so can u please help me out in getting back to my stock firmware...
Just go to intratech thread that was linked on first page. Then i would recommend to chose the frankenstein version to be able to reset your counter if needed.
Chose the firmware you want (kk5 is pretty good) and flash it with odin.
You can also flash a custom rom that is based on sammy like checkrom. You can do this trough cwm recovery and don't need to use odin for flashing.
If you don't have cwm yet you can install siyah kernel to get it.
Sent from my GT-I9100
I have an sg2 (sprint) had it flashed to boost, the 3g antenna comes and goes is there a fix for this?...also will I be able to get the facial recognition lock screen on my phone...please let me know thanks
Sent from my SPH-D710 using XDA App
hiback said:
Ok so i have installed Cyanogem Mod 7.1.0 ...
But now i want to get back to my stock firmware because i want to use tv out function which is missing from Cyanogen mod 7.1.0 so can u please help me out in getting back to my stock firmware...
Click to expand...
Click to collapse
There are a lot of ROMs based on the original Galaxy S software, so if you want the added customization, there are many options.
But what you want to do now to return to the original ROM, is to go in this thread:
http://forum.xda-developers.com/showthread.php?t=1113928
And find the one that was originally on the phone.
If your phone didn't come with a carrier specific ROM, you need to go to this thread:
http://forum.xda-developers.com/showthread.php?t=1075278
Simply download and flash it as a PDA file using Odin.
Rooting your Samsung Galaxy S2 i9100
This guide is thanks to capaxdoli, I have just modified it slightly to make it easier to read
If you use this guide to root your phone please go and thank him here - http://forum.xda-developers.com/showthread.php?t=1126522
Also please give this page a read it is the basics of rooting and should be considered the starting point for all learning to root - http://forum.xda-developers.com/showthread.php?t=1125282
Also another thanks should go to Chainfire - For his great work on kernels http://forum.xda-developers.com/showthread.php?t=1103399
1. Make sure your phone has kies 2 and have it install all the drivers.
2. Connected phone for the first time to computer and kies 2 and it recognized it fine.
3. Make sure Kies 2 is also fully updated.
4. The details of my phone are as follows: (please check what yours are)
Samsung Galaxy S2 i9100 (please only use this guide for this phone)
Fireware – 2.3.4
Kernel = XXKI4 (the important bit is the Ki4)
You can find all this info out in Settings – about phone
5. A prayer to My Lord for safe rooting
6. Go to this page and read all, then select the Kernel that is a match to yours – here – http://forum.xda-developers.com/showthread.php?t=1103399
7. Since I have Ki4, i had chosen to download this file [CF-Root-SGS2_XW_ODD_Ki4-v4.0-CWM4.zip]
8. Downloaded odin3-v1.85.zip here - http://www.mediafire.com/?wezzl287wb9v9hu
Extract and open the file (no installation...gasp!)
Open and run Odin ready to root your phone
Now select PDA and find the kernel that you downloaded and select
9. You might need to extract the kernel to select it in the PDA
10. Put your phone in download mode (press volume down + ok key + power on), a warning about custom OS flashes, press volume up key to continue.
11. You have pressed volume up key and the phone says that it has entered ODIN mode. it also says the following:
a. product name: GT-i9100
b. Custom Binary Download : No
c. current binary : Samsung Official
d. it also shows the android logo (the robot - big size) and says downloading...Do not turn off target !!
12. After this connected the phone to the computer (remember it is in download mode) and the drivers were installed again.
13. Go to Odin and you should see that under ID.com, there is a yellow background box and it says 0:[COM13]. in the message box (lower left corner) it says <ID:0/013> Added!!
14. Make sure the re-partition box is not checked in odin.
15. Clicked the start button...
16. The phone should install your new kernel and then re-boot it should show a yellow exclamation mark when it reboots.
17. That’s it your phone is now rooted –
Please visit these pages to –
See what you can now do with your rooted phone – http://android.stackexchange.com/qu...my-phone-now-what-what-do-i-gain-from-rooting
How to remove the yellow exclamation mark on when your phone starts - http://forum.xda-developers.com/showthread.php?t=1103399
This is on the first page only the 2nd post down
For anyone who is intrested if you want to install Ice Cream Sandwhich (ICS) then vist this page here.
s.d.oconnor said:
3. Do i need Rom Manager, or can i download a rom to my internal usb.
Click to expand...
Click to collapse
No, you don't need Rom Manager. Once you root the device, you download the ROM you want and place it in /sdcard. You can place it there before root but there is no point. Then make backup and flash it with Clockworkmod Recovery.
One advice though: when you download a ROM most developers provide a md5 checksum, check this md5 sum with some md5 checker tool. Then when you transfer it to the sdcard, check the md5 sum again. When they match - flash on. If they don't match you most probably wont brick your phone but it won't flash and you'll have to re-download and check sums.
I am sorry I can't give you an advice on kernels though.
gl hf rooting and flashing.
Thanks for the advice
Hi (den dobryi),
when i rooted my sgs2 i used odin. the process was the following:
1) get odin and read how to use it here - http://forum.xda-developers.com/showthread.php?t=1075278
2) download root kernel here - http://forum.xda-developers.com/showthread.php?t=1103399
3) flash the kernel, reboot and you are done - nazdrave ;]]
I would also like to know can you add any custom SGS2 rom to any rooted phone, i will be flashing with one of chainfire's CF-roots. Also is there a rom for ice cream sandwhich yet and where can i get it, as this is the rom i am after mainly.
P.S thanks for the reply morespama
no worries, the answer is yes - you can switch to any sg2 custom rom - but most require full wipe - so all your data like games/apps//ect will be deleted - read ^a lot of back ups or long sessions of trial and error^.
If you are after ICS rom then its still in Beta and hence the official version is still unavailable. But the latest stable custom version is the one im running - http://forum.xda-developers.com/showthread.php?t=1488063. the only thing is that you may have to ask your network to send you network data/mobile internet setings via sms since the instalation resets them as in my case. other then that perfect native ICS..;]]
Thanks again i might wait for a more stable full release. So if you are switching roms and it wips all yoir data, what is the best way to backup and restore all of your personal setting and apps when moving to a new rom
Sent from my GT-I9100 using XDA App
I use Titanium Backup, you can get it cracked all over google or at ipmart-forum.com
Thanks again, i have just rooted my phone, so simple when it comes down to it, although i just wanted to make sure i did not miss anything. My next stage is to install a custom rom so i better get down to geeking up on this now. Also i think i will post how i did this in this thread, as i think i can explain the very basics to people.
Thanks for your help, i hope you accept my friend request.
Glad to help. Flashing rom is probably easier then rooting ). Pm me if you need help.
Update of links
Getting ICS - http://teamhacksung.org/wiki/index.php/Experimental:GT-I9100:How_to_install
Discussion Thread on ICS - http://forum.xda-developers.com/showthread.php?t=1419102&page=726
Intrested in other more stable roms then visit -
Thread - http://forum.xda-developers.com/showthread.php?t=1176411
Website - http://www.cyanogenmod.com/devices/samsung-galaxy-s2
PLEASE TEST IF YOU HAVE THE multitouch issue BEFORE ROOTING, AS ROOTING WILL VOID YOUR WARRANTY Read this post: http://forum.xda-developers.com/showpost.php?p=46293575&postcount=279. I have not had time to look into this myself unfortunately, as I'm travelling. Better safe than sorry.
Check your device model ! Settings -> About device -> Model number. See the third post for exact supported model numbers. If your device is a totally different model, it will not work (may even brick) !
CF-Root is the root for "rooting beginners" and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root.
Donate
CF-Root has been available for many devices (Galaxy S1, Galaxy Tab 7", Galaxy S2, Galaxy Note, Galaxy Nexus, Galaxy S3, and many more) and has clocked over 16 million downloads. This is not even counting custom ROMs that already include it. Don't be a leech, buy me a beer (and use the "Thanks" button!). Imagine if every CF-Root user has donated me $1...
What's installed
- SuperSU binary and APK
- Stock recovery
Installation and usage
Flash the CF-Auto-Root package as PDA in ODIN (details on how to do that are in next post), and your device should reboot into a modified recovery (signified by a large red Android logo) and it will install SuperSU for you and restore the stock recovery, and reboot back into Android.
If you don't get to the red Android logo, boot into recovery manually ("adb reboot recovery", or boot while holding Power+VolUp+Home).
Did you see the red Android logo during rooting, but SuperSU does not appear? This may sometimes occur due to left-over files and settings, however, you can usually install SuperSU from Google Play at this stage and it'll just work.
Flash counters and KNOX warranty
Using this root method sets current binary and system status to custom. Additionally, it will also trigger the KNOX warranty void status.
This device store the traditional flash counter. Nor is is possible with Triangle Away to reset the current binary status. You will need to flash a stock kernel and stock recovery to reset the binary status.
The KNOX warranty status change is permanent, and a service center may deny warranty based on this flag - even if the other flags are reset correctly. The KNOX flag being tripped may also prevent certain Samsung KNOX features from working (enterprise security features). If this is something you care about, use a root method not based on custom kernels or recoveries, like a modified system partition. These are possible, but I don't personally make them, so look around!
Why isn't this just called CF-Root
The traditional CF-Root's included a custom recovery (CWM, TWRP, etc) and were meant for devices that had a single kernel/recovery combination. CF-Auto-Root doesn't include a custom recovery and is meant for devices that have kernel and recovery separate (so you can manually install any custom recovery you wish). The Auto part comes from the fact that a large part of the process is automated (though it constantly needs adjusting)
Not included - Triangle Away
Unfortunately, Triangle Away cannot currently be used on this device to reset the binary status or KNOX warranty void. It can still usually reset the system status, but that is of limited use.
Not included - adbd Insecure TODO: STILL UNDER DEVELOPMENT. Hopefully I'll get this to work soon.
As this CF-Root does not include a custom kernel, adb shell does not have root access by default (you can still get it by typing su inside the shell), nor is adb remount supported, nor will adb push and adb pull work on system files. adbd Insecure can be used to remedy this situation. (No idea what this is about ? Don't worry about it !)
CF-Auto-Root homepage
http://autoroot.chainfire.eu/
CF-Auto-Root main thread
[CENTRAL] CF-Auto-Root
For requests for new roots and generic discussion - please keep device specific discussion in the thread you are viewing now.
Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!
- Download and unzip the CF-Auto-Root-....zip file (see posts below this one)
- If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
- Done (if it took you more than 30 seconds, you need practise!)
NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This will start the install process.
New to Samsung? Unfamiliar with Odin? Think all the above is a hassle? Get used to it. It's very simple, and us Samsung folk use Odin (or Mobile ODIN ) for everything! It's so very very convenient once you get used to it. Notice the 30 second comment above? For experienced users, the entire process indeed takes only 30 seconds!
You may now optionally want to install and run Triangle Away to reset the flash counter.
Download
SM-N900 (International Exynos): CF-Auto-Root-ha3g-ha3gxx-smn900.zip
SM-N9005 (International Qualcomm): CF-Auto-Root-hlte-hltexx-smn9005.zip
(only works on 4.4 bootloaders, if you're still on 4.3 use the old version which you can find here: http://d-h.st/J32)
SM-N900T (T-Mobile US): CF-Auto-Root-hltetmo-hltetmo-smn900t.zip
SM-N900P (Sprint): CF-Auto-Root-hltespr-hltespr-smn900p.zip
SM-N900R4 (US Cellular): CF-Auto-Root-hlteusc-hlteusc-smn900r4.zip
SM-N900W8 (Canadia): CF-Auto-Root-hltecan-hlteub-smn900w8.zip
SM-N900S (Korea): CF-Auto-Root-hlteskt-hlteskt-smn900s.zip
SM-N9002 (China): CF-Auto-Root-hlte-h3gduoszn-smn9002.zip
SM-N9006 (China): CF-Auto-Root-hlte-h3gzc-smn9006.zip
SM-N9008 (China): CF-Auto-Root-hlte-h3gzm-smn9008.zip
SM-N9009 (China, untested): CF-Auto-Root-hlte-h3gduosctc-smn9009.zip
Untested versions: please let me know if they work!
Other models
T-Mobile US thread: http://forum.xda-developers.com/showthread.php?t=2467369
Sprint thread: http://forum.xda-developers.com/showthread.php?t=2469904
CF-Auto-Root is not yet available for all carrier-specific Note3's. Link me to stock firmwares for these devices as they appear, and I might be able to make a device-specific CF-Auto-Root.
What is happening Chainfire? The dev are working on some solution for the knox efuse? I am thinking about a software which can restore that flag or a software which skips triggering while rooting.. for this you guys need to sign the modified stuff which is hard. How you see the things at the moment? This is the only thing what is holding me back to buy the note 3 at the moment...
wooohooo... finally.. waiting for SM-n900 version
Waiting your great work for the Exynos model as well...
You asked for a stock firmware link here is one for N900 model: http://www.hotfile.com/dl/247435453/e638485/N900XXUBMI5_N900OJVBMI1_XFU.zip.html
Actually I need for N9000Q model but on Sammobile there were just N900 model, i hope those are same since both of them are for the same device (Exynos).
waiting sm-n9000Q root
Here is some mirrors for N900 stock firmware:
https://disk.yandex.ru/public/?hash=6S6f3t8/YXndZY264OWRBWExcagIsZ3qpLlgSQchtXE=
http://uploaded.net/file/heepon2s
http://hotfile.com/dl/248328141/19b7fd7/SER-N900XXUBMI5-20131001102120.zip.html
Many thanks man ????
Sent from my SM-N9005 using XDA Premium 4 mobile app
Thanks Chainfire, just in time for my N9005 arriving from Vodafone tomorrow
I hope someone could find a solution to reset Knox counter. I need root but also my warranty
Inviato dal mio SM-N9005 con Tapatalk 4
mouse100 said:
I hope someone could find a solution to reset Knox counter. I need root but also my warranty
Inviato dal mio SM-N9005 con Tapatalk 4
Click to expand...
Click to collapse
I was gonna hold off from rooting, but then just thought to myself, any time my previous Samsung phones have had a fault, like with the charging port, or head phone socket, I've just bought the part from eBay and fixed it myself. The only time it's gone back to Samsung was when my Note 2 had the sleep of death.
In which case, they would not be able to tell anything from it as the emmc screwed itself over. In light of this I probably will root it now the big guy @Chainfire has done his magic.
I'm currently still waiting for a response from Samsung about whether warranty on the hardware would still be void if the Knox counter read anything other than 0x0.
Sent from my SM-N9005 using Tapatalk 4
RavenY2K3 said:
I was gonna hold off from rooting, but then just thought to myself, any time my previous Samsung phones have had a fault, like with the charging port, or head phone socket, I've just bought the part from eBay and fixed it myself. The only time it's gone back to Samsung was when my Note 2 had the sleep of death.
In which case, they would not be able to tell anything from it as the emmc screwed itself over. In light of this I probably will root it now the big guy @Chainfire has done his magic.
I'm currently still waiting for a response from Samsung about whether warranty on the hardware would still be void if the Knox counter read anything other than 0x0.
Sent from my SM-N9005 using Tapatalk 4
Click to expand...
Click to collapse
No everyone is able to repair their own smartphone with hw parts, like you however please post samsung answer about warranty if Knox counter is voided. I think it's important for everyone to understand their policy about this.
Galaxy Note 3 | SM-9005 | Tapatalk
mouse100 said:
No everyone is able to repair their own smartphone with hw parts, like you however please post samsung answer about warranty if Knox counter is voided. I think it's important for everyone to understand their policy about this.
Galaxy Note 3 | SM-9005 | Tapatalk
Click to expand...
Click to collapse
Lol, it honestly isn't difficult in the slightest. Think of it as a jigsaw puzzle. Samsung's are one of the easiest manufacturer of devices to repair. "If" Sammy are so kind to respond to me, I'll be posting the reply as soon as it comes through.
Sent from my SM-N9005 using Tapatalk 4
RavenY2K3 said:
I was gonna hold off from rooting, but then just thought to myself, any time my previous Samsung phones have had a fault, like with the charging port, or head phone socket, I've just bought the part from eBay and fixed it myself. The only time it's gone back to Samsung was when my Note 2 had the sleep of death.
In which case, they would not be able to tell anything from it as the emmc screwed itself over. In light of this I probably will root it now the big guy @Chainfire has done his magic.
I'm currently still waiting for a response from Samsung about whether warranty on the hardware would still be void if the Knox counter read anything other than 0x0.
Sent from my SM-N9005 using Tapatalk 4
Click to expand...
Click to collapse
For me warranty still important. Because last time i use galaxy note 1, while change rom from cm10 to miui my note bricked. Then samsung replace my board to new one without pay anything
Sent from my SM-N900 using xda premium
monyozt said:
For me warranty still important. Because last time i use galaxy note 1, while change rom from cm10 to miui my note bricked. Then samsung replace my board to new one without pay anything
Sent from my SM-N900 using xda premium
Click to expand...
Click to collapse
That's what my point is about, sort of, if you brick your phone to the point where you get absolutely no output whatsoever, they wouldn't be able to tell what had happened anyway, and would have to change it.
Sent from my SM-N9005 using Tapatalk 4
Will this method work with my phone
Model SM -N9005
Baseband - N9005XXUBMI6
Build - JSS15J.N9005XXUBMI7
I got the phone through Vodafone and i believe it has thier own firmware on there as it had Vodafone bundled apps on it.
And can i just check all this about KNOX warranty... It doesnt stop the phone working in anyway at all..... all it does it void the warranty? can i still use KNOX?
Thanks Guys
Amazing thank u so much waitin for n900 version
Sent from my SM-N900 using Tapatalk 4
DTMHibbert10 said:
Will this method work with my phone
Model SM -N9005
Baseband - N9005XXUBMI6
Build - JSS15J.N9005XXUBMI7
I got the phone through Vodafone and i believe it has thier own firmware on there as it had Vodafone bundled apps on it.
And can i just check all this about KNOX warranty... It doesnt stop the phone working in anyway at all..... all it does it void the warranty? can i still use KNOX?
Thanks Guys
Click to expand...
Click to collapse
No, if you root you can also not use Knox anymore. May be never!
Thanks Dude! waiting for SM-n900 version
Envoyé avec Gnote 3 SM-N 900
WELCOME TO THE VERIZON NOTE 3 GUIDE FOR ROOTING, USING ODIN & UPDATING TO THE LATEST OTA
****HOW TO UPGRADE TO LEAKED 4.4.2 KITKAT BUILD****
@Hashcode has explained this very well here - do read it and recognize how neat this opportunity is for us.
That being said, there are some special instructions for utilizing this leak. They are pretty simple and require no special tools or procedures most people around here haven't already used at some point, see below.
1) Start from any Rooted 4.3 MJE Rom (including Stock) with Safestrap 3.65 installed
2) Make any necessary Titanium Backups, etc
3) Reboot to SafeStrap Recovery - I'd recommend making a backup of your 4.3 setup at this point, just in case.
4) Wipe Data & Caches - This is the wipe that is queued up for you immediately upon entering wipe menu in SS - When finished hit "home" button in SS
5) Click Install and flash either the Deodex or Odexed version of the NC2 4.4.2 leak
6) DO NOT CLICK REBOOT SYSTEM WHEN FINISHED - Instead, hit the "home" button in SS and click the main menu Reboot option.
7) Click Reboot to Download mode & follow typical Odin procedure (instructions below) to flash the 4.4.2 Firmware tar
8) Boot into Stock 4.4.2 and download Safestrap 3.72 built specifically for KitKat
9) Boot to SS 3.72 - I'd recommend making a backup at this point as well
10) Click thanks over on Beans thread and Hashcode's SafeStrap thread & ENJOY!
________________________________________________________________________________________________________________________
***OLD INFO***UPDATE TO LATEST OTA (MJE) ***OLD INFO***
METHOD 1 - BACK TO MJ7 & ACCEPT OTA:
1) Download and MD5 check the Tar (file removed).
2) Power down your device. Once fully off, HOLD POWER, HOME & VOLUME DOWN BUTTONS. A screen will appear with a warning about custom operating systems - press VOLUME UP to continue to download / odin mode
3) Plug your device into the PC & wait for Odin to show a "com" box with a number in the upper left corner of the window. Put the tar file above into the "AP" slot of Odin and wait for the "Start" button in Odin to be enabled. It could take a minute or two for Odin to read the tar file - it's a couple gigs, which is large - be patient. Once it's ready, click start and it will install a clean, unrooted MJ7 stock OTA firmware.
4) Once on this firmware you can navigate to Software Update via Menu > Settings > About Phone > Software Update. Once you've tapped this you'll see an option to either check for updates or download now/later. Select whichever option you have to update and wait for the file to download. You'll then be prompted to install now or wait. Install and it will automatically take over and install the latest OTA Firmware build ending in MJE. This will install the latest software, firmware, modem and kernel. As always with Odin, most likely you will lose all your data. Some have reported that their data was intact - I have no explanation for this as Odin is supposed to wipe your device during the flashing process - PREPARE AS IF DATA WILL BE LOST.
METHOD 2 - STRAIGHT TO MJE:
1) Download and MD5 check the Zipped Tar (file removed).
2) Navigate to the MJE file on your PC. Right click it and hover over "7-Zip," on the pop-out menu select "Extract Here." (Nearly any archiving software will appear in this right-click menu) It will decompress the tar file we need and you'll be ready to continue. This process will not work until you've decompressed the zip file!
3) Power down your device. Once fully off, HOLD POWER, HOME & VOLUME DOWN BUTTONS. A screen will appear with a warning about custom operating systems - press VOLUME UP to continue to download / odin mode
4) Plug your device into the PC & wait for Odin to show a "com" box with a number in the upper left corner of the window. Put the tar file above into the "AP" slot of Odin and wait for the "Start" button in Odin to be enabled. It could take a minute or two for Odin to read the tar file - it's a couple gigs, which is large - be patient. Once it's ready, click start and it will install a clean, unrooted MJE stock OTA firmware. As always with Odin, most likely you will lose all your data. Some have reported that their data was intact - I have no explanation for this as Odin is supposed to wipe your device during the flashing process - PREPARE AS IF DATA WILL BE LOST.
****DISCLAIMER: PROCEEDING & ROOTING YOUR DEVICE IS YOUR CHOICE - USING THE FOLLOWING ROOT TECHNIQUE(S) IS, AS ALWAYS, AT YOUR OWN RISK - FOLLOW INSTRUCTIONS AND YOU'LL BE FINE.****
****HOW TO ROOT 4.4.x KITKAT BUILDS FOR VERIZON NOTE 3****
There is an amazingly easy tool called "towel root" that is an application you install like any other side loaded app - once it's installed it's one click and you're rooted...can't ask for it to be much easier than that!
Get towel root here or Get more info here
***OLD INFO***HOW TO ROOT 4.3 JELLYBEAN BUILDS FOR VERIZON NOTE 3***OLD INFO***
There are two known methods to root MJ7 & MJE. I will not discuss how to root MI9 because there's no benefit whatsoever to remaining on that original build. Nothing was lost moving to MJ7 or MJE so if you want to be rooted I'd recommend moving on up to a later build.
Both Root methods are essentially "One-Click" applications produced by people or companies not using XDA as their methods of distribution. They are very simple and easy to use tools that are installed on your PC and guide you step-by-step through the process via the computer program. The one I recommend using is called "Kingo." There is also one called "vRoot" but, since I have no experience using it nor have any data on others successfully using it, I'll always recommend Kingo. Because they don't post these to XDA, I cannot post links to the source files. This is at the moderators and administrators of XDA's request. DON'T ask for the direct link(s) and NO posting them - they will be flagged down and moderators will haunt your dreams.
Once you've downloaded the files...Google is your friend ...install them and run them. They will ask for your phone to be connected - use the same USB to Micro USB cable as you used before - it should be a reliable one, as well as a reliable port on your PC. Watch the PC screen and the Device screen - there will be a few times you need to either wake the device or accept something on the device screen to progress - don't take a nap during this process. Sometimes it can take a while to download the files needed, other times it's a 5 minute process. YMMV
****HOW TO ADD A CUSTOM RECOVERY****
A logical next step after rooting is to add a custom recovery. Currently the Verizon Note 3 has a locked bootloader - this is bad news. It means we have no true custom recoveries available. There is nothing you can do about this, short of becoming extremely proficient in hacking enterprise level encryption overnight. Godspeed in this endeavor.
We have been blessed though - @Hashcode has worked his magic and enabled "Safestrap" a form of "Bootstrap" recovery which is, as the name implies, more reliable and, well, safer. This is a very stable and viable replacement for a typical custom recovery. In fact, it's based on one of the most popular recoveries - Team Win Recovery Project, or TWRP for short.
Head over here [RECOVERY LOCKED/MJ7,MJE,NC2,NC4] Safestrap Recovery v3.75 [2014-06-26 KK B03] to grab the latest APK and read the install instructions in the OP there CAREFULLY. This is not a foolproof tool and you are taking the same kind of risks as you took rooting your device. See appropriate disclaimers in Hashcode's thread. That being said, it's worked flawlessly for nearly everybody involved and word of "bricks" (or permanently damaged devices) for the Note 3 is basically nill - so stop worrying, follow directions and enjoy!
firmware mirror
thanks for doing this!!! The other one was super slow.... DL now and ill let you know if it fixes my problem! THANKS!!!
Does this method work IF:
I am rooted via root de la vega, running latest safestrap, beans v2 on Rom slot 1.
Baseband ver MI9
Build number MJ7
Would I have to uninstall anything to use your instructions OP?
Would I need to switch in safestrap to stock slot before beginning process?
Honestly haven't had a lick of trouble being on M19 baseband, but maybe I'm on borrowed time?
Nidisa said:
Does this method work IF:
I am rooted via root de la vega, running latest safestrap, beans v2 on Rom slot 1.
Baseband ver MI9
Build number MJ7
Would I have to uninstall anything to use your instructions OP?
Would I need to switch in safestrap to stock slot before beginning process?
Honestly haven't had a lick of trouble being on M19 baseband, but maybe I'm on borrowed time?
Click to expand...
Click to collapse
If you're already on build MJ7 then I'd just Odin the MJ7 baseband over in beans thread here: http://forum.xda-developers.com/showthread.php?t=2524572 No need to do this which will lose you root.
Transmission courtesy of my Note 3 & XDA Premium
Why wouldnt you just flash Beans Stock J7 rom in SS recovery then Odin the J7 modem? The only need to use Odin would be for returning to stock or fixing a soft brick.
droidstyle said:
Why wouldnt you just flash Beans Stock J7 rom in SS recovery then Odin the J7 modem? The only need to use Odin would be for returning to stock or fixing a soft brick.
Click to expand...
Click to collapse
But flashing that rom wouldn't change his baseband which is what he's after. That's why I said to Odin the modem
Transmission courtesy of my Note 3 & XDA Premium
DutchDogg54 said:
But flashing that rom wouldn't change his baseband which is what he's after. That's why I said to Odin the modem
Transmission courtesy of my Note 3 & XDA Premium
Click to expand...
Click to collapse
Thanks, DutchDogg, for the response!
*muah* from Nidisa....a her !
droidstyle said:
Why wouldnt you just flash Beans Stock J7 rom in SS recovery then Odin the J7 modem? The only need to use Odin would be for returning to stock or fixing a soft brick.
Click to expand...
Click to collapse
I would image that there are some firmware updates that you wouldn't be able to get if you just flashed the modem. I have not looked at the update package so I may be wrong about the firmware updates
DutchDogg54 said:
But flashing that rom wouldn't change his baseband which is what he's after. That's why I said to Odin the modem
Transmission courtesy of my Note 3 & XDA Premium
Click to expand...
Click to collapse
I am talking about in regards to this tutorial.
Am I correct in assuming that if it goes as planned I should not lose any data?
I see nothing about that in the OP, but I'm extra cautious without my nandroid security blanket...
Sent from my SM-N900V using XDA Premium 4 mobile app
PrettyPistol555 said:
Am I correct in assuming that if it goes as planned I should not lose any data?
I see nothing about that in the OP, but I'm extra cautious without my nandroid security blanket...
Sent from my SM-N900V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah, no data loss
EDIT - DATA LOSS HAS OCCURRED FOR SOME, PREPARE ACCORDINGLY
Transmission courtesy of my Note 3 & XDA Premium
I was under the impression that the Kingo was malware and not trusted? Someone said it was stealing IMEI and personal information? Is this not the case?
dcoy82 said:
I was under the impression that the Kingo was malware and not trusted? Someone said it was stealing IMEI and personal information? Is this not the case?
Click to expand...
Click to collapse
Not really, see this thread below discussing a response from the Kingo developers. Essentially, no its not not malware or malicious. It's closed source which is a little unnerving for some around open source friendly XDA. It kind of has to be closed source though because if it was open source then anyone, Verizon included, could patch the root exploit...Also, it & vroot (also confirmed non malicious) are essentially the only way to root the note 3 & several other Samsung devices in the post-knox hyper security world of big red. So, we have to bite the bullet on closed source so we can keep our path to root.
I used it and nothing funny is going on in my world. Hope this makes you a little more comfortable.
http://forum.xda-developers.com/showthread.php?t=2522602
Transmission courtesy of my Note 3 & XDA Premium
DutchDogg54 said:
Not really, see this thread below discussing a response from the Kingo developers. Essentially, no its not not malware or malicious. It's closed source which is a little unnerving for some around open source friendly XDA. It kind of has to be closed source though because if it was open source then anyone, Verizon included, could patch the root exploit...Also, it & vroot (also confirmed non malicious) are essentially the only way to root the note 3 & several other Samsung devices in the post-knox hyper security world of big red. So, we have to bite the bullet on closed source so we can keep our path to root.
I used it and nothing funny is going on in my world. Hope this makes you a little more comfortable.
http://forum.xda-developers.com/showthread.php?t=2522602
Transmission courtesy of my Note 3 & XDA Premium
Click to expand...
Click to collapse
Right, but Kingo has still not stated why he collects imei and other personal information. I pulled the plug and rooted with it just to have root but I also watched the traffic during the root process and plenty of data was sent at the end of the root process to 3 separate IP addresses all which are registered in China. It may be safe but he is definitely collecting information. I just want to make anybody aware of this before running this method blindly.
Sent from my SM-N900V using Tapatalk
dcoy82 said:
Right, but Kingo has still not stated why he collects imei and other personal information. I pulled the plug and rooted with it just to have root but I also watched the traffic during the root process and plenty of data was sent at the end of the root process to 3 separate IP addresses all which are registered in China. It may be safe but he is definitely collecting information. I just want to make anybody aware of this before running this method blindly.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Obviously it's not the ideal situation - no doubt about that - but I'm happy to have a simple, fairly safe method to root what is otherwise a very tough nut to crack. Here's a great response from a forum moderator that pretty much sums up the whole scenario as well as can be done at this point: http://forum.xda-developers.com/showpost.php?p=47326216&postcount=26
Transmission courtesy of my Note 3 & XDA Premium
dcoy82 said:
Right, but Kingo has still not stated why he collects imei and other personal information. I pulled the plug and rooted with it just to have root but I also watched the traffic during the root process and plenty of data was sent at the end of the root process to 3 separate IP addresses all which are registered in China. It may be safe but he is definitely collecting information. I just want to make anybody aware of this before running this method blindly.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Yes they did, if you had been paying attention to their Facebook and the other threads. The serial collection is inevitable. Your phone basically gives it up to your computer when establishing a connection. And the new update they released like a week ago made the collection of imei stop.
Sent from my SM-N900V using Tapatalk
Does anyone have a working link for mj7? It states to many downloads have been created.
Thanks for any help.
Sent from my SM-N900V using Tapatalk
sistemacaido said:
Does anyone have a working link for mj7? It states to many downloads have been created.
Thanks for any help.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Uploading to a different host now. I've never had this kind of trouble from Google Drive before... Sorry for the inconvenience. It will be up mid early morning and if I wake up in the middle of the night (not uncommon) I'll post the link then, if not it'll be up early tomorrow.
Transmission courtesy of my Note 3 & XDA Premium
New Host for MJ7 Tar file over at Android File Host, shouldn't have any restrictions going forward... Google Drive - You disappoint me
edit: See OP for Google Drive link...Android File Host link was throwing binary mismatch codes
DutchDogg54 said:
Uploading to a different host now. I've never had this kind of trouble from Google Drive before... Sorry for the inconvenience. It will be up mid early morning and if I wake up in the middle of the night (not uncommon) I'll post the link then, if not it'll be up early tomorrow.
Transmission courtesy of my Note 3 & XDA Premium
Click to expand...
Click to collapse
Unfortunately google drive is just like dropbox in the aspect of bandwidth limitations.
Greetings, fellow Mega-Maniacs!
I am currently working with dev Geohot to get us root access for the SGH-I527 with Baseband Version I527UCUBNE7. All known root methods have been tested and proven to not work with this version of android with this baseband, due to the extremely locked down nature of Samsung Knox on this device.
I, personally, have been throwing every exploit I can think of at this device, to no avail. As of the time and date of this post, we have a donor ready to help the cause (Special thanks to caguas56). That is why I'm proposing a bounty on root access for this phone (SGH-I527 AT&T US version only, although there is a high possibility that it'll work on the Sprint,T-Mo and VZW variant).
The first developer who can successfully get ROOT on KitKat with baseband I527UCUBNE7 and demonstrate this with a successful public test will be awarded the bounty. The bounty will be split equally between devs and donors willing to team up.
I'm in for $10 at the moment, and I'll piss away more if needed down the line.
Who else is in? LETS GET THIS DONE, PEEPS!
Please, only posts regarding root access on this thread. For firmware rollbacks to 4.2.2, see azpatterson3's thread located HERE
kmt5150 said:
Greetings, fellow Mega-Maniacs!
I am currently working with dev Geohot to get us root access for the SGH-I527 with Baseband Version I527UCUBNE7. All known root methods have been tested and proven to not work with this version of android with this baseband, due to the extremely locked down nature of Samsung Knox on this device.
I, personally, have been throwing every exploit I can think of at this device, to no avail. As of the time and date of this post, we have a donor ready to help the cause (Special thanks to caguas56). That is why I'm proposing a bounty on root access for this phone (SGH-I527 AT&T US version only, although there is a high possibility that it'll work on the Sprint,T-Mo and VZW variant).
The first developer who can successfully get ROOT on KitKat with baseband I527UCUBNE7 and demonstrate this with a successful public test will be awarded the bounty. The bounty will be split equally between devs and donors willing to team up.
I'm in for $10 at the moment, and I'll piss away more if needed down the line.
Who else is in? LETS GET THIS DONE, PEEPS!
Please, only posts regarding root access on this thread. For firmware rollbacks to 4.2.2, see azpatterson3's thread located HERE
Click to expand...
Click to collapse
In for at least $20.
Put me down for 2 bucks.
I know you stated you had tried it all but I have a couple questions for you.
#1. Are you able to odin and access the latest PhilZ Recovery on your Mega? I ask because I read other sections like the Note 2's, etc on AT&T and they are able to flash recovery fine and boot into recovery fine.
#2. If you have tried this method, did you try and flash the latest SuperSU v2.00 from Chainfire through PhilZ?
================
Below is a method I suggested to some in my OTA Update thread to NE4 ( KitKat ) for Rooting all my Galaxy phones on KitKat listed and not one has failed to gain root or to disable KNOX. Note this method will trip KNOX and void your warranty. Try this at your own risk....
================
1.Flash the latest Philz recovery ( Galaxy Mega (meliusltexx) ) .
1a) Be sure when flashing a custom recovery not to allow the device to reboot into the OS right after and instead go straight to the recovery first.
( Uncheck reboot device in Odin or if you forgot to uncheck the box after a successful flash of the Custom Recovery in Odin, quickly hold down vol+, Menu & Power Button or last resort pull the battery before it has time to reboot into the OS {again this is after the phone reboots from flashing the custom recovery and passes}).
The security will over write the custom recovery with the stock recovery and you will have to flash Philz or if available TWRP again. First boot into custom recovery will make it stick on after.
2. Once flashed and booted into recovery, you'll be on the main screen.
( Optional but recommended )
2a) At this point, and it is just a suggestion to you all, make a complete backup of the phone as it sits unmodded. I couldn't really tell you how many times I have read/seen of people post that they forgot to back up their phones after they had attempted to do something to their phones and had caused them to have problems..... well many would be surprised how often this happens and I have been guilty of it due to just being impatient. This way you will have a starting point fresh, stock and even unrooted to go back to. After your done proceed to step #3.
3. Tick on Philz settings.
4. Tick on Re-root System (Super SU).
5. You will then see the log scroll at the bottom and tell you to reboot and install SuperSU through the Playstore.
6. Reboot Device and once you have booted up, install SuperSU via Playstore or if you have the APK on hand, install it.
7. Once installed it will ask you that it needs to update binaries, do so. It will also detect KNOX and ask to attempt
to disable it, go ahead and it will attempt to do so. ( I have yet for it to say unsuccessful )
8. Enjoy being rooted afterwards.
=======================================
If after step #6 it fails to update binaries or for some chance the SuperSU APK failed to install properly or failed to provide Root Access, below is a link for the newer SuperSU v2.00 that is flashable in your Custom Recovery. Flash it by rebooting back into Recovery and flashing the ZIP file that's downloadable from the middle of the main page in the link below. Once flashed continue on from step #6 above.
Thank you @Chainfire
SuperSU v2.00 <------- click here
.
.
.
.
.
DarkAngel said:
I know you stated you had tried it all but I have a couple questions for you.
#1. Are you able to odin and access the latest PhilZ Recovery on your Mega? I ask because I read other sections like the Note 2's, etc on AT&T and they are able to flash recovery fine and boot into recovery fine.
#2. If you have tried this method, did you try and flash the latest SuperSU v2.00 from Chainfire through PhilZ?
================
Below is a method I suggested to some in my OTA Update thread to NE4 ( KitKat ) for Rooting all my Galaxy phones on KitKat listed and not one has failed to gain root or to disable KNOX. Note this method will trip KNOX and void your warranty. Try this at your own risk....
================
1.Flash the latest Philz recovery ( Galaxy Mega (meliusltexx) ) .
1a) Be sure when flashing a custom recovery not to allow the device to reboot into the OS right after and instead go straight to the recovery first.
( Uncheck reboot device in Odin or if you forgot to uncheck the box after a successful flash of the Custom Recovery in Odin, quickly hold down vol+, Menu & Power Button or last resort pull the battery before it has time to reboot into the OS {again this is after the phone reboots from flashing the custom recovery and passes}).
The security will over write the custom recovery with the stock recovery and you will have to flash Philz or if available TWRP again. First boot into custom recovery will make it stick on after.
2. Once flashed and booted into recovery, you'll be on the main screen.
( Optional but recommended )
2a) At this point, and it is just a suggestion to you all, make a complete backup of the phone as it sits unmodded. I couldn't really tell you how many times I have read/seen of people post that they forgot to back up their phones after they had attempted to do something to their phones and had caused them to have problems..... well many would be surprised how often this happens and I have been guilty of it due to just being impatient. This way you will have a starting point fresh, stock and even unrooted to go back to. After your done proceed to step #3.
3. Tick on Philz settings.
4. Tick on Re-root System (Super SU).
5. You will then see the log scroll at the bottom and tell you to reboot and install SuperSU through the Playstore.
6. Reboot Device and once you have booted up, install SuperSU via Playstore or if you have the APK on hand, install it.
7. Once installed it will ask you that it needs to update binaries, do so. It will also detect KNOX and ask to attempt
to disable it, go ahead and it will attempt to do so. ( I have yet for it to say unsuccessful )
8. Enjoy being rooted afterwards.
=======================================
If after step #6 it fails to update binaries or for some chance the SuperSU APK failed to install properly or failed to provide Root Access, below is a link for the newer SuperSU v2.00 that is flashable in your Custom Recovery. Flash it by rebooting back into Recovery and flashing the ZIP file that's downloadable from the middle of the main page in the link below. Once flashed continue on from step #6 above.
Thank you @Chainfire
SuperSU v2.00 <------- click here
.
.
.
.
.
Click to expand...
Click to collapse
Bootloader is locked
So no recovery flashing
Sent from my GT-I9205 using XDA Free mobile app
Grarak said:
Bootloader is locked
So no recovery flashing
Sent from my GT-I9205 using XDA Free mobile app
Click to expand...
Click to collapse
Well technically all bootloaders are locked (except for the few that aren't) but I take it AT&T is wanting/trying to join the band wagon with Verizon and locking the bootloaders indefinitely by encrypting them on all the devices they can now.
Sorry then, my method will not work straight forward. Good luck. :good:
DarkAngel said:
I know you stated you had tried it all but I have a couple questions for you.
#1. Are you able to odin and access the latest PhilZ Recovery on your Mega? I ask because I read other sections like the Note 2's, etc on AT&T and they are able to flash recovery fine and boot into recovery fine.
#2. If you have tried this method, did you try and flash the latest SuperSU v2.00 from Chainfire through PhilZ?
================
Below is a method I suggested to some in my OTA Update thread to NE4 ( KitKat ) for Rooting all my Galaxy phones on KitKat listed and not one has failed to gain root or to disable KNOX. Note this method will trip KNOX and void your warranty. Try this at your own risk....
================
1.Flash the latest Philz recovery ( Galaxy Mega (meliusltexx) ) .
1a) Be sure when flashing a custom recovery not to allow the device to reboot into the OS right after and instead go straight to the recovery first.
( Uncheck reboot device in Odin or if you forgot to uncheck the box after a successful flash of the Custom Recovery in Odin, quickly hold down vol+, Menu & Power Button or last resort pull the battery before it has time to reboot into the OS {again this is after the phone reboots from flashing the custom recovery and passes}).
The security will over write the custom recovery with the stock recovery and you will have to flash Philz or if available TWRP again. First boot into custom recovery will make it stick on after.
2. Once flashed and booted into recovery, you'll be on the main screen.
( Optional but recommended )
2a) At this point, and it is just a suggestion to you all, make a complete backup of the phone as it sits unmodded. I couldn't really tell you how many times I have read/seen of people post that they forgot to back up their phones after they had attempted to do something to their phones and had caused them to have problems..... well many would be surprised how often this happens and I have been guilty of it due to just being impatient. This way you will have a starting point fresh, stock and even unrooted to go back to. After your done proceed to step #3.
3. Tick on Philz settings.
4. Tick on Re-root System (Super SU).
5. You will then see the log scroll at the bottom and tell you to reboot and install SuperSU through the Playstore.
6. Reboot Device and once you have booted up, install SuperSU via Playstore or if you have the APK on hand, install it.
7. Once installed it will ask you that it needs to update binaries, do so. It will also detect KNOX and ask to attempt
to disable it, go ahead and it will attempt to do so. ( I have yet for it to say unsuccessful )
8. Enjoy being rooted afterwards.
=======================================
If after step #6 it fails to update binaries or for some chance the SuperSU APK failed to install properly or failed to provide Root Access, below is a link for the newer SuperSU v2.00 that is flashable in your Custom Recovery. Flash it by rebooting back into Recovery and flashing the ZIP file that's downloadable from the middle of the main page in the link below. Once flashed continue on from step #6 above.
Thank you @Chainfire
SuperSU v2.00 <------- click here
.
.
.
.
.
Click to expand...
Click to collapse
Believe me, we have tried it all. I have tried a process similar to this and when the phone got done with all the flashing and went to boot up, I got a prompt that said 'We have detected software not approved for use by AT&T. Please take your phone to an AT&T store for assistance.' It also says Secure Check Failed: Kernel. I had to send my phone to sammy to get it fixed since I tripped a few flags. Should be back by Friday the 10th.
Possible to use this method with 4.4 kernel from mega?
http://forum.xda-developers.com/showthread.php?t=2722073
I don't know much about this but my S4 active also has a locked bootloader, and I was able to achieve root on 4.4.2 using the above method. Thought it might be possible to adapt to your cause.
jstinger9489 said:
http://forum.xda-developers.com/showthread.php?t=2722073
I don't know much about this but my S4 active also has a locked bootloader, and I was able to achieve root on 4.4.2 using the above method. Thought it might be possible to adapt to your cause.
Click to expand...
Click to collapse
Will definitely try this again when my phone gets here tomorrow and post updates...
jstinger9489 said:
http://forum.xda-developers.com/showthread.php?t=2722073
I don't know much about this but my S4 active also has a locked bootloader, and I was able to achieve root on 4.4.2 using the above method. Thought it might be possible to adapt to your cause.
Click to expand...
Click to collapse
Tried and my device still won't act right, can only get into download mode. recovery is gone and when i attempt to power on, I get a msg about Secure fail: Kernel and then a yellow triangle with a ! says 'System software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nesrest AT&T store for help."
UPDATE: A buddy of mine has a JTAG service and I'm going to send it to him for repair. UGH! I'm selling this sonofabitch. I should NOT have to go thru this much bull**** just do modify something I paid 500 bucks for without a contract.
kmt5150 said:
Tried and my device still won't act right, can only get into download mode. recovery is gone and when i attempt to power on, I get a msg about Secure fail: Kernel and then a yellow triangle with a ! says 'System software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nesrest AT&T store for help."
UPDATE: A buddy of mine has a JTAG service and I'm going to send it to him for repair. UGH! I'm selling this sonofabitch. I should NOT have to go thru this much bull**** just do modify something I paid 500 bucks for without a contract.
Click to expand...
Click to collapse
Have you tried towel root
http://towelroot.com/
BarakOsama said:
Have you tried towel root
http://towelroot.com/
Click to expand...
Click to collapse
Have YOU tried towelroot?
Or have you not read any of the many theads on the subject?
Sorry, not trying to be rude, the same thing has been said so many times
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
Can anyone send me boot.img of ATT KK rom?
captemo said:
Have YOU tried towelroot?
Or have you not read any of the many theads on the subject?
Sorry, not trying to be rude, the same thing has been said so many times
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
Click to expand...
Click to collapse
My bad..
Alright.
To summarize for people who haven't paid attention. Phone was bricked in a last ditch effort to flash back to 4.3 because the 4.4 update made my phone run like s#it. I also have an S4 Active and the service sucks harder than it already did. The 4.4 update makes the S4 drop out constantly and the battery life blows. Samsung told me to run kies in download mode to get it back to 4.3 I did and BOOM, now phone is fu©k!ng bricked and they won't fix it, claiming it's 'rooted' because the kernel says it's version 3 when it's supposed to be at 4 for kitkat. Fu©k!ng duh, you jerks made me flash it back. I am personally never buying another samsung product again because their customer service was horsesh!t. I happen to have a sammy tv, blu ray, home theater and 2 of their former 'top end' phones, but now I'm ditching them. They can lick my scrotum for all I care anymore.
end rant, back to music.
SCH-R960
I have the US Cellular Galaxy Mega SCH-R960 also updated to 4.4.2 out of the box. I am in for some bucks if you can apply this to my version also the baseband number is R960TYUBNF1, I will send you whatever info you need from the phone. Lets get this done! Thank you!
MeatHammer311 said:
I have the US Cellular Galaxy Mega SCH-R960 also updated to 4.4.2 out of the box. I am in for some bucks if you can apply this to my version also the baseband number is R960TYUBNF1, I will send you whatever info you need from the phone. Lets get this done! Thank you!
Click to expand...
Click to collapse
Can you make a complete firmware dump and compile a .PIT file?
No root.
I do not have root so I can not do those things. If there is a way without root please point me in that direction. Thanks
MeatHammer311 said:
I do not have root so I can not do those things. If there is a way without root please point me in that direction. Thanks
Click to expand...
Click to collapse
sure you can
use heimdall
and can anyone send me the boot.img now?
I don't even think you guys want root if you're not even trying to help
Grarak said:
sure you can
use heimdall
and can anyone send me the boot.img now?
I don't even think you guys want root if you're not even trying to help
Click to expand...
Click to collapse
tell me how to get it any you will have it 1 before 5pm today est.
also here is the pit file you asked for. I used it to unbvrick my phone a few times with odin.
ita for the at&t version