HTC stuck or etc use this - AT&T HTC One (M7)

I was stuck for two days adb,cmd, sideload , and etc I tried everything couldn't flash nothing had twrp and a black screen this will fix your phone it will fully rewrite it to stock like a pc would it is Guru_Reset_M7_3.62.401.1 http://www.htc1guru.com/2013/10/ota/

Related

android bricked, but will still turn on just freezes during boot up

okay its an android otimus V , i rooted it a couple days ago, then i tried to install a rom via rom manager, didnt make back up, now when it restarted, the lg screen shows, then it starts to do the roms bootup and its this little animation but during this animation it freezes and thats as far as it will go. also i cant start up recovery with the vol up-home-power, the lg screen flashes, then it goes black, then has the black light up and it just stays like that for hours until i take out the battery, is there anyway to fix my phone!!
have you tried flash via kdz ?
That's how I solve my bricked problem.
In your case I suspect that you don't have any rom, it's like one PC without OS.
mitzkaia said:
have you tried flash via kdz ?
That's how I solve my bricked problem.
In your case I suspect that you don't have any rom, it's like one PC without OS.
Click to expand...
Click to collapse
i dont know how to do that and i cant seem to find a guide for my phone

Unable to boot to Recovery Mode GS3

Hello
I have been using my int Gs3 for sometime and decided to root and explore the mods and custom fw world. I have started with getting to root access and after that install CWM.
Then I try to install nightly cyanogenmod 10. It didnt work and boot back to normal GS3 Touchwiz interface. After that I tried the GooManager and when the phone is restarted it went to bootloop. I removed the battery and put it back. The problem started there.
The phone does not boot to any OS, I only can see the galaxy s3 9300 black splash screen and awatis there. I can go into download mode, but when I go into recovery mode, I can see the Android robot, and it dies The screen is too fast but what I can see it cannot mount EFS, System and any folder.
So I have tried several different methods
- Tried to flash with original rom, different roms, CWM and what I can find suitable for international model. But everytime I got stucked in Nand Write part. In some of them, the flash started and stucked in installing some parts(passes the cache and hidden and stuck after that)
- Tried with bricked phone roms, different PIT files and Bootloader Vralec methods.
- When I am trying these, I have tried with 3 different PC's with/without KIES and Samsung drivers installed. When I plug the phone in Download mode, the PC recognizes it as Generic device.
- I manage to flash the CWM but when it restarts it does not go any further than the first splash screen, but in Odin, some time later it turns to pass. Funny, when the phone is on Galasy S3 black splash screen, the pc recognizes the phone and starts to install the driver.
So, here is an interesting flashing story of mine. I really would appreciate your valuable comments and suggestions.
Thanks in advance.
cugami said:
Hello
I have been using my int Gs3 for sometime and decided to root and explore the mods and custom fw world. I have started with getting to root access and after that install CWM.
Then I try to install nightly cyanogenmod 10. It didnt work and boot back to normal GS3 Touchwiz interface. After that I tried the GooManager and when the phone is restarted it went to bootloop. I removed the battery and put it back. The problem started there.
The phone does not boot to any OS, I only can see the galaxy s3 9300 black splash screen and awatis there. I can go into download mode, but when I go into recovery mode, I can see the Android robot, and it dies The screen is too fast but what I can see it cannot mount EFS, System and any folder.
So I have tried several different methods
- Tried to flash with original rom, different roms, CWM and what I can find suitable for international model. But everytime I got stucked in Nand Write part. In some of them, the flash started and stucked in installing some parts(passes the cache and hidden and stuck after that)
- Tried with bricked phone roms, different PIT files and Bootloader Vralec methods.
- When I am trying these, I have tried with 3 different PC's with/without KIES and Samsung drivers installed. When I plug the phone in Download mode, the PC recognizes it as Generic device.
- I manage to flash the CWM but when it restarts it does not go any further than the first splash screen, but in Odin, some time later it turns to pass. Funny, when the phone is on Galasy S3 black splash screen, the pc recognizes the phone and starts to install the driver.
So, here is an interesting flashing story of mine. I really would appreciate your valuable comments and suggestions.
Thanks in advance.
Click to expand...
Click to collapse
GO here : http://forum.xda-developers.com/showthread.php?t=1993044

Problem after CWM installation

After installing cwm I tried to boot to cwm recovery and it boots fine and the screen is working but when I tried to start the device normally the devices boots but with black screen. I can call my phone and the phone ring I can also connect it to PC but the screen is always black.any help please.
Any Help?
Happened to me just last night as well.. spend 4 hours wandering what could be
In my case I have flashed wrong kernel ,
Once I realized that , changed back and everything worked fine

Nearly softbricked my S6 edge, f.... up from time to time

Hi
Rooted my S6, and threw TWRP recovery on, put a "sixperience S7" rom on it, at first it worked flawlessly, but since I didnt make a factory reset i pulled one later, thats when my problems started.
Installs fine, reboots and the initial start and setup goes fine, but when the screen turns off and i wake it up again, the screen looked like a pc screen with no gfx driver, funky colors and very dark - tried two times to make a clean install, same happened
Tried to install stock rom with Odin, failed, tried 3-4 times, fails
Then i went into TWRP and deleted all......but seriously all......coudnt boot into anything then, not even download mode, got the message on the screen that "something went wrong in updating the firmware, try the emergency recovery with Samsung Smart Switch" That of course couldnt connect to the phone, when i finally got it to be recognized by the computer, my phone wasn't supported by the program (because it is rooted i read somewhere)
After an hour with a lot of swearing and crying almost, I tried to connect it to Odin and i got connected, installed a new TWRP and i got it into recovery where i could install a new rom, and the phone booted again
Heres my question, when i put it into download mode (tried to install stock rom with Odin once more) then I cannot boot it again, I have to install TWRP and a new rom before I can get it up and running again, is there any possibility to get a stock rom installed ever again?

MI Note 4 stuck on boot logo

I was installing TWRP but something went wrong so I couldn't boot into the operating system then I tried installing the stock ROM with XiaoMiTool V2. it installed the wrong but it still did not work then I tried installing it with MI flash while using all the latest files but this also doesn't seems to be working whenever I try to flash my phone it takes forever and never complete the flash it just goes to 100% and keeps on going I have left it for about an hour did not work then I tried other versions of the same software but for some reason it just shows flash done within 3 seconds and then nothing happens to the phone everything remains the same any idea what can I do

Categories

Resources